The McAlpine Sink Overflow Stopper is a simple and effective accessory designed to prevent water from overflowing through the sink's overflow hole. It is an essential accessory for any sink that does not have an overflow prevention system built-in, as it provides a backup measure against water damage.
Made from high-quality materials, the McAlpine Sink Overflow Stopper is durable and built to last. It is designed to fit securely into most standard sink overflow holes, ensuring that water won't leak through the opening. The stopper features a convenient handle, making it easy to insert and remove from the overflow hole.
The McAlpine Sink Overflow Stopper is also incredibly easy to use. Simply place it into the sink's overflow hole and push down to create a seal. To remove it, just pull it out using the handle. It's that simple!
The McAlpine Sink Overflow Stopper is an essential accessory for anyone looking to prevent water damage from sink overflows. Its high-quality construction, ease of use, and compatibility with most standard sink overflow holes make it a popular choice for homeowners, DIY enthusiasts, and professional plumbers alike.
In summary, the McAlpine Sink Overflow Stopper is a reliable and practical accessory for anyone looking to prevent water damage from sink overflows. Its durable construction, easy-to-use design, and compatibility with most standard sink overflow holes make it a must-have accessory for any sink without an overflow prevention system built-in. Upgrade your sink today with the McAlpine Sink Overflow Stopper!
・ Mounted on Card with Hanging Slot
・ Sink Overflow Stopper
・ Black Plastic overflow grid
The McAlpine Stainless Steel Pop-Up Plug is a sleek and modern accessory that will add a touch of sophistication to your bathroom sink. The plug is made of high-quality stainless steel, which gives it a sturdy construction and a premium look.
The stainless steel material used in the construction of the plug is resistant to rust and corrosion, ensuring that the plug will remain in great condition for years to come. It's also easy to clean and maintain, making it a hygienic and practical choice for any bathroom.
Installation of the McAlpine Stainless Steel Pop-Up Plug is a breeze. Simply insert the plug into your sink's waste opening and push down to close it. To release the water, push down on the plug again. The plug is designed to work seamlessly with your existing plumbing system and is compatible with most sink waste openings.
The McAlpine Stainless Steel Pop-Up Plug is an excellent choice for anyone looking to upgrade their bathroom sink waste plug accessory or replace an old one. Its premium construction, easy installation, and modern design make it a popular choice for homeowners, DIY enthusiasts, and professional plumbers alike.
In summary, the McAlpine Stainless Steel Pop-Up Plug is a must-have accessory for any modern bathroom sink. Its durable construction, easy installation, and sleek design make it a reliable and stylish choice for any household. Upgrade your sink waste plug accessory today with the McAlpine Stainless Steel Pop-Up Plug.
・ Mounted on Card with Hanging Slot
・ Stainless Steel Pop-Up Plug
・ Manufactured in Stainless steel
The McAlpine BSW10P Centre Pin Bath Waste is a plumbing accessory designed for use in bathtubs. Here's a breakdown of its key features:
Centre Pin: The centre pin refers to the mechanism that controls the flow of water through the waste. In this case, it's a "pop-up" style waste, meaning that when you push down on the centre pin, the waste will open and allow water to drain out of the bathtub. When you push down on the pin again, it will pop back up and close the waste.
Bath Waste: A bath waste is a plumbing component that connects the drain in the bathtub to the plumbing system of the building. It's designed to allow water to drain out of the bathtub, while also preventing any debris or other items from clogging the pipes.
70mm Stainless Steel Flange: The flange is the part of the waste that sits on top of the bathtub and secures the waste in place. In this case, the flange is made of stainless steel, which is a durable and corrosion-resistant material.
Black PVC Plug: The plug is the part of the waste that seals the drain when the waste is closed. In this case, the plug is made of black PVC, which is a type of plastic that's known for its strength and durability.
Overall, the McAlpine BSW10P Centre Pin Bath Waste is a high-quality plumbing accessory that's designed to provide reliable performance and long-lasting durability.
・ Available in 1¼" or 1½¿
・ Black PVC plug
・ Available with or without CP chain
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
Introducing the McAlpine Brass Ferrule 70mm Nickel Finish BRBOLT70, the perfect solution for securing and sealing plumbing fixtures.
Crafted from high-quality brass with a nickel finish, this ferrule is designed to withstand exposure to moisture and chemicals, making it a reliable choice for both residential and commercial plumbing systems.
The McAlpine Brass Ferrule 70mm Nickel Finish BRBOLT70 is designed with a threaded configuration, which allows for a more secure and watertight seal. It's easy to install, simply screw the ferrule onto the threaded fixture until it fits snugly in place.
This ferrule is an ideal choice for homeowners, DIY enthusiasts, and professional plumbers alike. Whether you're looking to secure a plumbing fixture or need to repair a damaged plumbing system, the McAlpine Brass Ferrule 70mm Nickel Finish BRBOLT70 is an excellent solution.
In addition to its functional benefits, the nickel finish adds an elegant touch to any plumbing system. The ferrule is also lightweight and compact, making it easy to store and transport.
In summary, the McAlpine Brass Ferrule 70mm Nickel Finish BRBOLT70 is an essential component for anyone looking to maintain a secure and watertight plumbing system. With its easy installation, high-quality construction, and compatibility with a range of plumbing fixtures, this ferrule is an excellent choice for a range of applications.
・ Manufactured in Nickel Plated Brass
・ Other sizes available
The McAlpine BN1 White Plastic Backnut with Rubber Washer is a plumbing accessory used to secure a pipe or fitting in place. The backnut is made of white plastic and has a threaded inner surface that allows it to be screwed onto the corresponding threaded end of a pipe or fitting. The backnut is also equipped with a rubber washer that provides a tight seal between the backnut and the pipe or fitting, preventing leaks.
The McAlpine BN1 White Plastic Backnut with Rubber Washer is commonly used in plumbing installations where a secure and leak-free connection is required, such as in bathrooms, kitchens, and other areas where water is used. The backnut is easy to install and requires no special tools or expertise, making it a popular choice among both professional plumbers and DIY enthusiasts.
Overall, the McAlpine BN1 White Plastic Backnut with Rubber Washer is a reliable and cost-effective plumbing accessory that can help ensure a safe and leak-free plumbing installation.
Size: 1.25" BSP ・ Available in 1.5" BSP, 1¾" BSP and 2" BSP・ Available in 4 flange sizes・ White Plastic
The McAlpine T28M-NRV Multifit In-Line Non-Return Valve is a plumbing component designed to prevent backflow of water or sewage in a drainage system. It is installed in-line with the pipe and allows water to flow in one direction only.
The valve is made of durable plastic and features a top access for easy cleaning and maintenance. This means that if the valve becomes clogged with debris or sediment, it can be easily accessed and cleaned without having to remove the entire valve from the pipe.
The Multifit design of the valve means that it can be used with a variety of different pipe materials and sizes, making it a versatile choice for many different plumbing applications.
Overall, the McAlpine T28M-NRV Multifit In-Line Non-Return Valve with top access for cleaning is a reliable and easy-to-maintain option for preventing backflow in a drainage system.
・ Available in 1¼" and 1½" sizes
・ Prevents back flow of water
・ Must be installed in the horizontal position
・ Should only be used when there is no alternative
・ Universal Connections
The McAlpine TSG1-T150SS 75mm Water Seal Trapped Gully is a plumbing component designed for use in drainage systems. It features a removable grid that can be easily taken out for cleaning, and is suitable for use with tiles or gratings. The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, allowing for easy installation with compatible pipes.
The water seal in the gully prevents foul odors from escaping into the air, making it an important component in any plumbing system. The trapped gully is typically installed in areas where there is a risk of water collecting, such as in showers, wet rooms, or other areas where water is likely to accumulate.
The McAlpine TSG1-T150SS 75mm Water Seal Trapped Gully is made from high-quality materials, ensuring that it is durable and long-lasting. It is designed to meet all relevant plumbing standards, ensuring that it is safe and reliable to use in a wide range of applications.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 75mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
Durable replacement seal for Speedfit fittings
JG Speedfit EPDM O-Ring (also known as a toric joint) is used to create a permanent leak-proof connection. Designed, manufactured and assembled in the UK.
Features and benefits
Replaces damaged or worn O-Rings in Speedfit Twist & Lock® fittings
Suitable for hot and cold water and central heating systems
Compatible with plastic or copper pipe
John Guest push-fit Imperial to Metric Tube to Hose Connector is a push-fit connector designed for adapting metric sized pipe or tubing to a hose type barbed connection. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Engineered to the highest quality, the fitting is suitable for foodstuff, potable liquids and inert gases. In accordance with the British Beer & Pub Association Code of Practice, fittings can also be used with N2/CO2 and mixed gas dispense lines, as well as air, pneumatic and vacuum applications. All John Guest fittings are manufactured and assembled in the UK. Suitable for use with non-toxic food grade material, potable liquids and inert gases Safe and secure push-fit connection Connect disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristicsPack of 5
John Guest push-fit acetal female adaptor (BSP thread) fitting connects metric sized pipework to a BSP type fitting. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal copolymer, the fitting is suitable for water, potable liquids and intermittent hot water applications (up to 65°C max). All John Guest fittings are manufactured and assembled in the UK.
Rigid and hardwearing acetal copolymer material with an EDPM O-Ring
Suitable for potable liquids and intermittent hot water applications up to 65°C max (not suitable for air, pneumatic or vacuum applications)
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Compatible with LLDPE or soft metal pipe/tubing
John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance.Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow.John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications.
All John Guest fittings are manufactured and assembled in the UK.
Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance Integral 1/4 turn isolation valve Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, water treatment and purification applications.Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems.
Compatible with LLDPE or soft metal pipe/tubing
This JG Underfloor Speedfit mixing valve unit is compatible with the brand's Speedfit underfloor hitting systems.
Product features
Compatible with Speedfit underfloor heating systems
Technical specifications
Brand JG Underfloor
Finish Galvanised
Length (M) 0,29
Length (mm) 290
Material Type Ductile Iron
Range speedfit
Range Name Speedfit
Range Type Wet System Underfloor Heating Valves
Weight 815.00000
Hazardous N
Body Material Ductile Iron
Dimensions (L x W x D) 290 x 220 mm
Material Ductile Iron
Supplier Product Code SPUFH1-H
Type Mixing Valve Unit
WEEE Compliant N
Width (mm) 220
JG Underfloor replacement flow meter for underfloor heating (UFH) manifolds. The integral indicator shows the set flow rate of the associated circuit and allows for adjustment, if required. Includes gauge locking cap to prevent accidental adjustment.
Easy to read indicator
Fully adjustable for flexible floor calibration Locking cap protects against accidental adjustment
Suitable for underfloor heating manifolds
The Grohe Silverflex Shower Hose is designed for durability and flexibility, making it an essential addition to your shower setup. With a length of 1500mm, it provides ample reach and convenience.
Durable Chrome Finish: Ensures long-lasting shine and resistance to corrosion.
Flexible Design: Allows for easy maneuverability and positioning during use.
Universal Fit: Compatible with most standard shower heads and fittings.
Easy Installation: Quick and hassle-free setup for immediate use.
Ideal Length: 1500mm length provides ample reach for comfortable showering.
The Mcalpine Spanner is designed specifically for 70/85 mm shower trap flanges, making installation and maintenance a breeze. This essential tool ensures a secure fit and reliable performance.
Designed for 70/85 mm shower trap flanges - Outer measurement
Durable construction for long-lasting use
Easy to use for both DIY enthusiasts and professionals
Ensures a secure and reliable fit
Ideal for installation and maintenance tasks
Support clip to prevent pipe from kinking or twisting. John Guest flow bend clip is designed to support tubes and eliminate pipe kinks. Made from durable plastic, the clip holds cold formed pipe bends and keeps pipework neat and tidy, lowering the risk of damage or accidental disconnection.
Pack of 10
McAlpine Shower trap and Flexible connector finished in Brushed Brass is designed to provide efficient drainage for shower trays. The flexible connector provides flexibility for a variety of plumbing configurations. Suitable for shower trays with a 90mm waste hole With Flexible connector for ultimate flexibility to suit any angle 50mm Water Seal Shower Trap 1�" BSP Thread
McAlpine ABS32/35G-MB is a Matt Black Brass compression straight connector designed to connect ABS (Acrylonitrile Butadiene Styrene) waste pipes and fittings to brass compression fittings. The connector should be used in conjunction with ABS solvent weld pipes and fittings that conform to the BS EN 1329-1:2000 standard.
John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20�C. At elevated temperatures (50�C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certified
Add the quantity to your basket that you require and we'll cut that length of pipe for you in multiples of 1m meter, for example: 7 meter length of pipe, add quantity 7 to the basket.
If you want separate different lengths of pipe then do these separately, for example: 3 meter length of pipe, add quantity 3 to the basket, repeat the process again for another length, you will then receive a different length pipe for each added to the basket.
Pack of 10Size : OUTER DIAMETER: 12MM & INSIDE DIAMETER: 9MM
John Guest equal tee push-fit fitting connects three equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Strong acetal copolymer fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
Pack of 3
Plugs an unused port on a John Guest push-fit fitting
John Guest push-fit acetal plug is for plugging unused connection ports on a John Guest fitting. All John Guest fittings are manufactured and assembled in the UK.
Pack of 5
John Guest equal tee push-fit fitting connects three equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing
John Guest straight connector push-fit fitting connects two equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Primaplus compression fittings are a premium brass fitting, manufactured in Britain.
Primaplus compression fittings can be used for a variety of installations including water and gas. Made in Britain to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from others manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
PrimaPlus endfeed fittings are a premium copper fitting which can be used for a variety of installations including water and gas. Manufactured from copper to EN 1254 standard, and fully WRAS approved, you can be sure of a perfect fit each time. PrimaPlus fittings are also kite marked, ensuring that they are to the highest British standard, setting them apart from other manufacturers.
Kite marked approval BS Standard.
WRAS approved for use with drinking water.
Manufactured to EN 1254 standard.
Introducing the Plasson Mechanical Plastic Wrench, a versatile tool designed for ease of installation of Plasson fittings. This wrench is specifically engineered to handle compression fittings with a diameter ranging from 16mm to 40mm. The wrench is suitable for a variety of applications, making it an essential addition to any toolkit.
Key Features:
- Universal Fit: The Plasson Mechanical Plastic Wrench is compatible with compression fittings from 16mm to 40mm in diameter, ensuring a perfect fit for a wide range of applications.
- Durable Construction: Constructed from high-quality plastic materials, this wrench is designed to withstand the rigors of daily use, providing reliable performance and longevity.
- Easy to Use: The ergonomic design of the wrench allows for comfortable handling and easy operation, making it ideal for both professional plumbers and DIY enthusiasts.
The Plasson Mechanical Plastic Wrench is a must-have tool for anyone working with Plasson fittings. Its robust construction, combined with its versatile size range, makes it a reliable and efficient tool for any job. Order yours today and experience the convenience and effectiveness of this high-quality wrench.
Main Product Description:
The FloPlast Niagara External Right Hand Stopend Black is a high-quality, durable fixture designed to cap off the right-hand open ends of Niagara gutter lengths. Made from uPVC material, it forms part of the Niagara Ogee guttering system and is suitable for various applications such as new builds, refurbishments, conservatories, and extensions in areas with heavy rainfall. It offers easy installation, good flow capacity, and comes with a 10-year performance and colour guarantee.
Features:
- Ornate (K-style) profile
- Clip system for fast and easy installation
- Designed for right-hand ends only
- Compatible with FloPlast 65mm square or 68/80mm round downpipe systems
- Manufactured to BS EN 607 standards
- Kitemarked under KM501316
Benefits:
- Traditional ogee style profile
- High capacity PVC-U domestic rainwater system
- Revolutionary moulded water-tight seal and retaining clip pre-fitted for user-friendly installation
- Suitable for all properties, old and new
- Outlet connects to square or round downpipes
- Available in various colours: black, white, brown, caramel, and FloPlast Cast Iron Effect guttering
- Fast delivery options available
Main Product Description:
Introducing the FloPlast Half Round 75mm Gutter Fascia Bracket in black, designed for seamless integration with your gutter system. This high-quality bracket is perfect for enhancing the appearance of your property while ensuring reliable performance. Its sleek design complements various architectural styles, making it an excellent choice for both modern and traditional homes.
Key Features:
- Dimensions: 75mm diameter, suitable for mini gutters.
- Material: High-grade plastic for durability and resistance to weather conditions.
- Mounting System: Screwed to the fascia board using countersunk screws, providing secure attachment.
- Clip Design: Designed for easy installation and clipping into place.
Benefits:
- Aesthetic Appeal: Enhances the visual appeal of your gutter system, blending seamlessly with your home's exterior.
- Durable: Constructed from robust materials that can withstand harsh weather conditions.
- Easy Installation: Can be easily installed with minimal effort and tools.
Main Product Description:
Introducing the FloPlast Half Round 75mm Gutter Union Black, designed for seamless integration into your rainwater system. This union bracket is perfect for various applications, including garages, sheds, and other structures, offering a reliable and durable solution for managing rainwater flow.
Features:
- Waterproof seal technology through downward clip compression on a small rubber seal
- Compatible with 75mm half round gutters
- Small system design suitable for garages, sheds, and similar buildings
Benefits:
- Enhanced durability and reliability
- Seamless integration into existing systems
- Suitable for a variety of applications, including garages, sheds, and more
Main Product Description:
The FloPlast Solvent Weld Soil 90 Degree Spigot Bend is a versatile plumbing component designed for creating a sharp 90-degree turn in soil piping systems. Available in both black and olive grey finishes, this bend features a long spigot tail that can be easily connected to other fittings using a solvent weld technique. It provides a reliable solution for changing directions in pipe layouts without compromising flow rate or system integrity.
Features:
- Constructed from durable materials suitable for soil piping applications
- Long spigot tail for secure connection to other fittings
- Solvent socket at one end for easy installation
- Available in two popular colors: black and olive grey
- Designed for use with solvent weld techniques
Benefits:
- Enables precise changes of direction in pipe layouts
- Compatible with various piping systems and materials
- Provides a seamless transition between different sections of piping
- Adds flexibility to the design of pipe networks
Main Product Description:
The FloPlast Solvent Weld Soil Branch Grey SS191 is a high-quality component for soil pipe systems, designed to join horizontal and vertical pipes with ease. With its unique 92.5-degree angle, it ensures a self-cleaning fall while providing a secure connection for all three connections using solvent sockets.
Features:
- Resistant to inorganic acids, alkalis, and boiling water
- Made from robust PVC-U material
- Available in olive grey color
- Suitable for use with plain-ended pipes or other fittings
- Self-cleansing due to its angled design
Benefits:
- Enhanced durability against various chemicals and heat sources
- Versatile fitting suitable for various pipe configurations
- Aesthetically pleasing olive grey finish
- Improved water flow due to self-cleansing angle
Main Product Description:
The FloPlast Solvent Weld Soil 92.5 Degree Bend Grey is a versatile plumbing component designed for use with PVC soil pipes. It features solvent sockets on both ends that allow it to be connected to plain ended pipes or other fittings using solvent welding techniques. The 92.5-degree angle provides a smooth transition in changing the direction of the pipe, making it suitable for use in various applications without compromising water flow and drainage efficiency.
Features:
- Constructed from high-quality PVC material for durability and resistance to corrosion
- Designed for use with standard PVC soil pipes
- Solvent sockets on both ends enable easy connection to plain ended pipes or other fittings
- Available in different sizes, including 50mm and 110mm diameters
Benefits:
- Promotes efficient water flow and drainage by reducing turbulence caused by sharp angles
- Ensures seamless integration with existing plumbing systems due to its universal compatibility
- Offers long-term performance and reliability, even under harsh environmental conditions
Introducing the FloPlast ABS Solvent Weld 92.5 Degree Cross Tee 40mm White (Product Code: 225430) – a reliable and versatile solution for your plumbing needs. This cross tee is designed to provide a secure and seamless connection in your plumbing system.
Key Features:
Size: Tailored for 40mm pipes, the ABS Solvent Weld 92.5 Degree Cross Tee (225430) ensures a precise fit in your plumbing configuration.
Angle: Featuring a 92.5-degree cross tee, this component facilitates complex plumbing layouts, allowing for efficient direction changes in your system.
Material: Crafted from high-quality ABS (Acrylonitrile Butadiene Styrene), this cross tee offers durability and resistance to impact, ensuring long-lasting performance.
Color: The white finish adds a clean and professional look to your plumbing system, complementing various design aesthetics.
Solvent Weld Connection: Engineered for secure solvent weld connections, providing a reliable and leak-free joint for your plumbing setup.
Versatile Application: Suitable for a variety of plumbing installations, this cross tee offers flexibility in adapting your plumbing system to different configurations.
Benefits:
Precise Fit: Tailored to 40mm pipes, this cross tee ensures a precise and secure fit, contributing to the efficiency of your plumbing system.
Efficient Direction Changes: The 92.5-degree angle facilitates complex plumbing layouts, allowing for efficient and smooth direction changes in your system.
Durable Construction: Crafted from high-quality ABS, this tee is built to withstand the demands of plumbing applications, ensuring longevity and resistance to impact.
Corrosion Resistance: The ABS material is resistant to corrosion, ensuring a clean and unobstructed water flow through your plumbing system.
Aesthetic Appeal: The white finish adds a clean and professional look to your plumbing setup, enhancing the overall aesthetic of your installation.
Versatility: The cross tee's design allows for versatile application, making it suitable for various plumbing configurations and installations.
Upgrade your plumbing system with the FloPlast ABS Solvent Weld 92.5 Degree Cross Tee 40mm White (225430) – a reliable and versatile solution that combines durability with ease of installation, ensuring efficient and secure plumbing connections in your network.
The McAlpine Multifit Straight Connector 1.1/2" T28M-BL is a plumbing fitting used to connect two pipes with a diameter of 1.1/2 inches. It is designed for use with solvent weld waste pipes and is commonly used in domestic and commercial plumbing systems.
The "Multifit" part of the name stands for "Multi Fit," which is a type of fitting made by McAlpine, a UK-based plumbing company. The "Straight Connector" refers to the straight connection between the two pipes, rather than a 90-degree angle or other configuration.
The "T28M" part of the name is a reference to the specific model number of the fitting. It is important to ensure that the fitting is compatible with the pipes you are working with and that it is installed correctly to avoid leaks or other plumbing issues. Colour: Black
_ Available in 1.25", 1.5", and 2" sizes
_ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe
