JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
The John guest 3/8Ó OD x 3/8Ó NPT push-to-connect to male valve is manufactured from white polypropylene and equipped with epdm o-rings utilizing John guestÕs push-fit technology to make easy, reliable, leak-free connections. They have been developed to satisfy the compatibility needs for a wide range of applications and can be used on plastic or soft copper tubing. To make a connection, the tube is simply pushed in by hand; the unique John guest collet locking system holds the tubing firmly in place. Disconnection is just as easy and requires no special tools.About this item
John guest push-to-connect technology provides a simple, reliable, leak-free connection
Manufactured from white polypropylene and equipped with EPDM o-rings
Can be used with plastic or soft Copper tubing
Manufactured with FDA compliant materials and NSF 61 and 51 certified
Lead-free, corrosion free, non-toxic, and more chemically resistant than other plastics
Pack of 5
JG Speedfit cold water service PE-copper coupling for the connection of MDPE pipe. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service PE-copper coupling is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a minimum wall thickness of 4mm. Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for cold water use only
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a minimum wall thickness of 4mm. Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for cold water use only
JG Speedfit cold water service equal straight connector for the connection of two equal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service equal straight connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit cold water service equal straight connector for the connection of two equal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service equal straight connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit cold water service equal straight connector for the connection of two equal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service equal straight connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. DZR brass body with a chrome plate is ideal for surface mounted pipework Instant push-fit service valve with 1/4 turn isolation screwdriver slot Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. • Suitable for hot and cold water services, central heating systems and combi systems • BS EN 7291 parts 1, 2, 3 and S, WRAS approved • Secure and easy demounting without the need for a tool • 50 year guarantee • Minimum operating temperature - 20 °C • Maximum operating temperature - 105 °C • Maximum operating pressure at minimum temperature - 12 BAR • Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM201510W Warranty (years) 50 Diameter (mm) 15 Pack Size 1 Fitting Type Coupler Equal or Reducing Reducing A Size 15mm B Size 10mm
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. • Suitable for hot and cold water services, central heating systems and combi systems • BS EN 7291 parts 1, 2, 3 and S, WRAS approved • Secure and easy demounting without the need for a tool • 50 year guarantee • Minimum operating temperature - 20 °C • Maximum operating temperature - 105 °C • Maximum operating pressure at minimum temperature - 12 BAR • Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM201510W Warranty (years) 50 Diameter (mm) 15 Pack Size 1 Fitting Type Coupler Equal or Reducing Reducing A Size 15mm B Size 10mm
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. • Suitable for hot and cold water services, central heating systems and combi systems • BS EN 7291 parts 1, 2, 3 and S, WRAS approved • Secure and easy demounting without the need for a tool • 50 year guarantee • Minimum operating temperature - 20 °C • Maximum operating temperature - 105 °C • Maximum operating pressure at minimum temperature - 12 BAR • Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM201510W Warranty (years) 50 Diameter (mm) 15 Pack Size 1 Fitting Type Coupler Equal or Reducing Reducing A Size 15mm B Size 10mm
JG Speedfit cold water service back plate elbow to connect MDPE pipe forming a 90° bend. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service back plate elbow is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit cold water service back plate elbow to connect MDPE pipe forming a 90° bend. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service back plate elbow is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit brass drain cock is used to drain water from a central heating system. Designed, manufactured and assembled in the UK. Durable DZR brass body Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for central heating systems only
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Instant push-fit connection and durable male thread Safe flame-free installation, with no hot works, glue or flux Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit cold water service equal straight connector for the connection of two equal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service equal straight connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit cold water service equal straight connector for the connection of two equal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service equal straight connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a minimum wall thickness of 4mm. Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for cold water use only
JG Speedfit cold water service stop tap MDPE x copper or PEX instantly shuts of water. Simply push the valve fully onto the pipe. To demount, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Simply push the JG Speedfit cold water service stop tap MDPE x copper or PEX fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit cold water service stop tap MDPE x copper or PEX instantly shuts of water. Simply push the valve fully onto the pipe. To demount, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Simply push the JG Speedfit cold water service stop tap MDPE x copper or PEX fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit equal tee push-fit fitting for the connection of three equal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
