John Guest tube cutter is designed for accurately cutting LLDPE tubing up to 22mm. Simply mark where the pipe needs to be cut and then use the handy clamp action to cut a square edge, prefect for pipe insertion into a John Guest fitting.
Suitable for sizes up to 22mm
JG Speedfit bulkhead elbow push-fit fitting that is primarily used for the modular bathroom ‘Pod’ market. The bulkhead allows connections to fixtures, through partitions. Simply push the push-fit fitting fully onto plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit bulkhead elbow push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for cold water use only
JG Speedfit thread washer is for use with female couplers or tap connectors. Designed, manufactured and assembled in the UK
Replacement thread seal for Speedfit tap connectors and FBSP fittings
Suitable for cold and hot water and central heating
JG Underfloor 4 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 4 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications only
JG Underfloor 8 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 8 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications only
JG Underfloor 6 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 6 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications only
JG Aura Probe is used to control underfloor heating (UFH) temperature in rooms where moisture could cause an issue e.g. wet rooms or bathrooms. The sensor is ideal for areas where thermostats cannot be directly installed. It can also control floor temperature where overheating would cause damage. A JG Aura Probe box is required and sold separately.
Monitors and controls temperature
Prevents overheating
JG Underfloor 2 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 2 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications only
JG Underfloor 3 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 3 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications only
JG Underfloor Manifold Isolation Valve is a replacement valve for that thermostatically opens the return port for the associated manifold circuit when in use and closes when shutting down.
Installed on the return bar of the manifold, the valve opens as hot water is pumped through the circuit slowly opening as the temperature rises. The valve closes automatically as the system shuts off and cools.
Durable brass
Suitable for JG Underfloor heating manifolds manufactured prior to April 2014
JG Underfloor Heating Air Vent automatically discharges any air that may build up within the underfloor heating (UFH) system to eliminate any cold spots within the floor.
An alternative solution to manual bleed valves, the integral float automatically drops to allow any air to be vented from the top of the valve. The vent is easy to install as it simply screws directly into the JG Underfloor Manifold.
Integral float automatically releases air
Durable DZR brass with a nickel plate finish
Suitable for underfloor heating applications only
JG Underfloor Angle Ball Valve is a service valve that isolates supply to the underfloor heating (UFH) manifold and control pack.
The ball valve connects the main heating flow and return pipe to the mixing valve, while allowing the supply to the control pack to be safely isolated for maintenance purposes. The angle design allows it to be used in both vertical or horizontal pipe arrangements.
Replacement ball valve for a JG Thermomix Control Pack
Durable DZR brass with nickel plate finish
Angle design for vertical or horizontal pipe arrangements
JG Speedfit push-fit connections for fast and simple install
This JG Underfloor Speedfit mixing valve unit is compatible with the brand's Speedfit underfloor hitting systems.
Product features
Compatible with Speedfit underfloor heating systems
Technical specifications
Brand JG Underfloor
Finish Galvanised
Length (M) 0,29
Length (mm) 290
Material Type Ductile Iron
Range speedfit
Range Name Speedfit
Range Type Wet System Underfloor Heating Valves
Weight 815.00000
Hazardous N
Body Material Ductile Iron
Dimensions (L x W x D) 290 x 220 mm
Material Ductile Iron
Supplier Product Code SPUFH1-H
Type Mixing Valve Unit
WEEE Compliant N
Width (mm) 220
JG Underfloor Pipe Staples are used to quickly and securely fix underfloor heating pipework to insulation. Suitable for screed floor applications, this method of pipe fixing is cost-effective and offers high heat output and response.
The pipe staples are barbed to ensure a secure grip and are easy to install when using a JG Underfloor Staple Gun.
Screed pipe fixing system
Barbed staples secure pipe to insulation
Ideal for regular and irregular shaped rooms
Conduit required when pipework runs through adjacent rooms
Suitable for underfloor heating applications only
JG Underfloor floor clips screw easily into the insulation to secure 15mm pipe, they are best installed using a JG Underfloor fixing tool.
Secure pipe fixing floor clips
Screw down 15mm pipe clips
JG Underfloor conduit elbow allows for transition from JG Speedfit pipe from the UFH manifold pipework to conduit piping run within the floor. It can be fixed or free standing.
90ºC angle
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and JG Speedfit Conduit Pipe
Suitable for underfloor heating applications only
JG Aura Probe box houses JG Aura Probe sensors. It ensures the probe is protected from humidity within bathrooms and wet rooms. A JG Aura Probe is required and sold separately.
Monitors and controls temperature
Prevents overheating
JG Aura Dial Thermostat regulates temperature on underfloor heating (UFH) systems using the slide switch on the thermostat dial.
3 temperature settings (automatic, manual and frost)
Suitable for underfloor heating applications only
JG Aura Wireless Thermostat 230v is an energy saving solution for controlling underfloor heating (UFH) systems, individual radiators and boiler switching. The 4-in-1 thermostat can be used as a programmable room thermostat, group control thermostat, group thermostat or hot water timer.
The mains-wired thermostat removes the hassle of replacing batteries and enhances the wireless signal as each unit acts as a repeater. It also offers individual and multi-room control and heating can be regulated from anywhere and at any time using the free JG Aura app.
When internet enabled, controls require no maintenance as they automatically update.
Energy and cost savings of up to 40%
Individual or multi-room heating controls
Regulates underfloor heating, individual radiators and/or boilers
Unique 4-in-1 thermostat
230v mains wired, wireless network
Slimline design with touch sensitive controls
Free Smart App control option
JG Lowfit manifold reducer allows any JG Underfloor Manifold port to be converted to a LowFit connection size of 12mm. Simply push the reducer into the JG Speedfit port on both flow and return bars.
Manifold reducer with Speedfit connections
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Suitable for underfloor heating applications only
The JG Underfloor Manifold Connection Kit is designed for connecting multiple JG LowFit or JG Underfloor Manifolds together. It is an ideal solution for larger properties that require multiple loops per room, or when additional underfloor heating (UFH) circuits are required on an existing installation.
The kit is easy to installl and comes complete with sealing washers. Simply remove the blanking plugs from the existing manifold at the end of both flow and return bars. Insert the sealing washer into the connectors and tighten. The additonal manifold can then be connected to the other end, creating further circuits, whilst still using a single JG Underfloor Thermomix Control Kit.
The manifold flow meters will need to be recalibrated after installation on both manifolds to ensure optimum performance.
Connects two JG Underfloor or JG LowFit manifolds
Quick & easy to fit with union connections
Kit contains both adaptors for flow and return bars and sealing washers
JG LowFit conduit elbow allows for transition from JG Speedfit pipe from the UFH manifold pipework to conduit piping run within the floor. It can be fixed or free standing.
90ºC angle
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and JG Speedfit Conduit Pipe
Suitable for underfloor heating applications only
JG LowFit Edge Strip is used around the edge of a solid (screed) floor to provide an expansion gap as the floor heats up and cools down. It also has insulating properties ensuring heat loss is kept to a minimum.
Foam edge strip for screed floors
Acts as an expansion gap when the floor heats up and cools down
