JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Brass Nickel Plated push-fit manifold
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Indices included
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Brass Nickel Plated push-fit manifold
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Indices included
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass female stem adaptor that converts Speedfit push-fit to a female thread appliance.
The JG Speedfit brass female stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass female stem adaptor that converts Speedfit push-fit to a female thread appliance.
The JG Speedfit brass female stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male stem adaptor that converts Speedfit push-fit to a male thread appliance.
The JG Speedfit brass male stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male stem adaptor that converts Speedfit push-fit to a male thread appliance.
The JG Speedfit brass male stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass back plate elbow with back plate for connecting pipe using a female thread, making it ideal for bib taps. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass back plate elbow is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable female thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass back plate elbow with back plate for connecting pipe using a female thread, making it ideal for bib taps. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass back plate elbow is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable female thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass back plate elbow with back plate for connecting pipe using a female thread, making it ideal for bib taps. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass back plate elbow is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable female thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass female coupler for connecting metric pipe using a female thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass female coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable female thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable male thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable male thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable male thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable male thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable male thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable male thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit x hand tighten flexi hose (white PVC) for the connection to a male thread appliance, such as a Tap. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean.
On one end the hose features a push-fit connection for a supply pipe. On the other end there is a plastic nut which can be hand tightened on to a tap or male thread. To demount the push-fit end, simply push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit x hand tighten flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit 4 way push-fit manifold for splitting a main supply line into four reduced outlet feeds. Simply push the pipe fully onto the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit 4 way push-fit manifold is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (not suitable for central heating systems)
JG Speedfit x hand tighten flexi hose (white PVC) for the connection to a male thread appliance, such as a Tap. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean.
On one end the hose features a push-fit connection for a supply pipe. On the other end there is a plastic nut which can be hand tightened on to a tap or male thread. To demount the push-fit end, simply push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit x hand tighten flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x hand tighten flexi hose (white PVC) for the connection to a male thread appliance, such as a Tap. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean.
On one end the hose features a push-fit connection for a supply pipe. On the other end there is a plastic nut which can be hand tightened on to a tap or male thread. To demount the push-fit end, simply push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit x hand tighten flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit monobloc mixer flexi hose (white PVC) that connects plastic or copper pipe onto a monobloc mixer. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean.
On one end the hose features a push-fit connection for a supply pipe. On the other end there is a monobloc connection which can be installed on to a monobloc tap. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit monobloc mixer flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit monobloc mixer flexi hose (white PVC) that connects plastic or copper pipe onto a monobloc mixer. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean.
On one end the hose features a push-fit connection for a supply pipe. On the other end there is a monobloc connection which can be installed on to a monobloc tap. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit monobloc mixer flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x union nut flexi hose (white PVC) for the connection to a male thread appliance, such as a tap. The PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x union nut flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x union nut flexi hose with service valve (white PVC) for the connection to a male thread appliance, such as a tap. The white PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Ideal for bathroom basin and bath taps, the valve enables water to be isolated in the event of an emergency or for maintenance work using an easy to operate integrated handle.
Simply push the JG Speedfit x union nut flexi hose with service valve (white PVC) fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Integral service valve for isolation with an easy to operate handle
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit elbow pattern flexi hose (white PVC) that connects the water supply to a male thread appliance.On one end the hose features a push-fit connection for a supply pipe. The white PVC hose material significantly reduces hose ‘kinking’ and makes the product easier to clean
On the other end there is a 90 degree bent nut which can be tightened on to a side entry tap, toilet or male thread. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit elbow pattern flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit monobloc mixer flexi hose (braided) for the connection of plastic and copper pipe to a female mixer tap (monobloc mixers). To make a connection simply push the push-fit fitting fully on to the pipe and screw the thread into the bloc. The hose has offset spanner locations for ease installation. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit monobloc mixer flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit monobloc mixer flexi hose (braided) for the connection of plastic and copper pipe to a female mixer tap (monobloc mixers). To make a connection simply push the push-fit fitting fully on to the pipe and screw the thread into the bloc.The hose has offset spanner locations for ease installation. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit monobloc mixer flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. An alternative to hard piping to a tap or fixture Integral service valve for isolation with 1/4 turn screwdriver slot Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage Grip & Seal cartridge with stainless steel teeth and main O-Ring seal Compatible with plastic or copper pipes (inserts required)Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x union with service valve and metal connectors (braided) for the connection to a male thread appliance, such as a tap. Ideal for bathroom basin and bath taps, the valve enables water to be isolated in the event of an emergency or for maintenance work using a ¼ turn screwdriver slot. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x union with service valve and metal connectors (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Integral service valve for isolation with 1/4 turn screwdriver slot
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit union nut flexi hose with service valve (braided) for the connection of pipe to a male thread appliance, such as a tap. The valve enables the flow of water to an appliance to be isolated in the event of an emergency or for maintenance work using a tamperproof ¼ turn screwdriver slot. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit union nut flexi hose with service valve (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Integral service valve for isolation with an easy to operate handle
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x Speedfit flexi hose (white PVC) for the connection of plastic or copper pipe. The white PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x Speedfit flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x Speedfit flexi hose (braided) for the connection of plastic or copper pipe. The flexi hose is ideal for the connection of two pipes where the angle is too steep to bend the pipe to make a connection. Simply push the push-fit fitting fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x Speedfit flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x Speedfit flexi hose (braided) for the connection of plastic or copper pipe. The flexi hose is ideal for the connection of two pipes where the angle is too steep to bend the pipe to make a connection. Simply push the push-fit fitting fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x Speedfit flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x Speedfit flexi hose (braided) for the connection of plastic or copper pipe. The flexi hose is ideal for the connection of two pipes where the angle is too steep to bend the pipe to make a connection. Simply push the push-fit fitting fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x Speedfit flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x Speedfit flexi hose (braided) for the connection of plastic or copper pipe. The flexi hose is ideal for the connection of two pipes where the angle is too steep to bend the pipe to make a connection. Simply push the push-fit fitting fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x Speedfit flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x Speedfit flexi hose (white PVC) for the connection of plastic or copper pipe. The white PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x Speedfit flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x union nut flexi hose (white PVC) for the connection to a male thread appliance, such as a tap. The PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x union nut flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
