Pipe Fittings
John Guest Speedfit John Guest Speedfit Tank Connector 15mm
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a minimum wall thickness of 4mm. Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for cold water use only
£11.49
John Guest Speedfit John Guest Speedfit Plastic Service Valve 22mm (22SV)
JG Speedfit service valve for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit service valve with 1/4 turn isolation screwdriver slot Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)
£20.49
John Guest Speedfit John Guest Speedfit Brass Coupler 22mm X 3/4" Male BSP
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Instant push-fit connection and durable male thread Safe flame-free installation, with no hot works, glue or flux Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
£19.99
John Guest Speedfit John Guest Speedfit Brass Cylinder Adaptor 22 X 1" Male
JG Speedfit brass male cylinder adaptor push-fit fitting that connects pipe to a male thread hot cylinder. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
£30.49
John Guest Speedfit John Guest Speedfit Brass Cylinder Adaptor 22 X 1" Female
JG Speedfit brass female cylinder adaptor push-fit fitting that connects pipe to a female thread hot cylinder. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
£30.49
John Guest Speedfit John Guest Speedfit Brass Backplate Elbow 15mm X 1/2"
JG Speedfit brass back plate elbow with back plate for connecting pipe using a female thread, making it ideal for bib taps. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit brass back plate elbow is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Instant push-fit connection and durable female thread Safe flame-free installation, with no hot works, glue or flux Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
£28.49
John Guest Speedfit John Guest Speedfit White Plastic Service Valve 15mm X 1/2"
JG Speedfit straight service valve with tap connector for the connection of plastic and copper pipe. Using an integrated handle, the valve allows for isolation of fixtures (taps, bath taps and WCs) and appliances (washing machines and dishwashers) for maintenance or installation. To connect simply push the JG Speedfit service valve with tap connector fully onto the pipe and screw up to the fixture to the threaded connection. To demount the connection, pull the collet towards the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Push-fit service valve and hand-tighten tap connector Integrated ¼ turn handle instantly isolates water Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)
£20.49
John Guest Speedfit John Guest Speedfit Plastic Service Valve 15mm (15SV)
John Guest push-fit acetal service valve metric is used to temporarily shut off hot or cold water supply to a drinks dispense fixture or fitting. The ball valve is easily operated with a ¼ turn screwdriver slot and is also suitable for hot and cold water applications. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. All John Guest fittings are manufactured and assembled in the UK. Durable acetal copolymer material with nitrile O-rings Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for hot and cold water Compatible with LLDPE or soft metal pipe/tubing
£18.49
John Guest Speedfit John Guest Speedfit White Plastic Angle Svc Valve 15mm X 1/2"
JG Speedfit angle service valve with tap connector for connecting fixtures to pipework. The valve enables the flow of water to a fixture to be isolated in the event of an emergency or for maintenance work using a tamperproof ¼ turn screwdriver slot. Simply push the valve fully onto the pipe and use the 90o bent nut to hand-tighten on to a side entry tap, toilet or male thread. To demount the push-fit connection end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit angle service valve with tap connector is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Push-fit service valve and hand-tighten tap connector 1/4 turn isolation screwdriver slot Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)
£16.99
John Guest Speedfit John Guest Speedfit Cp Service Valve 15mm X 1/2" TC (15Ptsv)
JG Speedfit brass service valve with tap connectors (chrome plated) for connecting fixtures to pipework. Using a tamperproof 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture to be isolated in the event of an emergency or for maintenance work. Simply push the valve fully onto the pipe and hand-tighten the nut on to a side entry tap, toilet or male thread. To demount the push-fit connection end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit brass service valve with tap connectors (chrome plated) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Push-fit service valve and hand-tighten tap connector Durable brass chrome plated body 1/4 turn isolation screwdriver slot Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
£25.49
John Guest Speedfit John Guest Speedfit Brass Coupler 15mm X 1/2" Male BSP
JG Speedfit brass male coupler for connecting metric pipe using a male thread. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit brass male coupler is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK. Instant push-fit connection and durable male thread Safe flame-free installation, with no hot works, glue or flux Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
£17.99
John Guest Speedfit John Guest Speedfit Double Check Valve 15mm (15DCV)
John Guest push-fit acetal double check valve provides protection from the reversal of flow or back siphonage against Fluid Category 3 risks. he low headloss design, is suitable for potable liquids , foodstuffs, intermittent hot water (up to 50oC max and in accordance with The British Beer and Pub Association Code of Practice), water treatment and purification applications. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. All John Guest fittings are manufactured and assembled in the UK. Durable acetal copolymer material and nitrile O-rings Backflow prevention up to Fluid Category 3 Spring loaded internal check valve Integral test ports Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable water, foodstuffs, intermittent hot water, water treatment and purification applications (not suitable for vacuum or air) Compatible with LLDPE or soft metal pipe/tubing
£29.49
John Guest Speedfit John Guest Speedfit Brass Drain Cock 15mm
JG Speedfit brass drain cock is used to drain water from a central heating system. Designed, manufactured and assembled in the UK. Durable DZR brass body Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for central heating systems only
£16.49
John Guest Speedfit John Guest Speedfit Appliance Tee 15mm X 3/4"(15Apt2)
JG Speedfit appliance tee allows isolation of appliances such as washing machines or dishwashers for maintenance or installation. Simply push the push-fit fitting fully onto the pipe and thread the appliance hose onto the valve. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit appliance tee is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Quickly connects an appliance to the water supply Integrated 1/4 turn shut off valve Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating systems)
£22.49
McAlpine McAlpine Slimline Floor Gully With Non-Return Valve 2 Piece White Cover
The McAlpine Slimline Floor Gully With NRV 2 Piece White Cover is a top-quality plumbing component designed to provide reliable and efficient water management for a variety of applications. With its sleek and modern design, this floor gully adds a touch of elegance to any bathroom, wet room, or other commercial or residential environment. Made from high-quality materials, including a white cover and two-piece gully, this floor gully is built to last. Its slimline design ensures that it remains unobtrusive, while its NRV (non-return valve) feature helps to prevent unpleasant odours from entering the room. Featuring a standard size, this floor gully is easy to install and suitable for use with a wide range of flooring materials. Its efficient drainage system ensures that water is removed quickly and effectively, preventing flooding and water damage. Whether you're renovating a bathroom or wet room or working on a commercial project, the McAlpine Slimline Floor Gully With NRV 2 Piece White Cover is an excellent choice. With its high-quality construction, efficient water management capabilities, and stylish design, this floor gully is a must-have for any plumbing project. ・ Slimline design: The McAlpine Slimline Floor Gully is designed to be low profile, making it perfect for installations where height is limited. ・ Non-return valve (NRV): This floor gully comes with a non-return valve (NRV), which helps to prevent unpleasant odours and sewage gases from entering your home. ・ Two-piece construction: The two-piece construction of this floor gully makes it easy to install and maintain. ・ White cover: The white cover of this floor gully provides a clean and modern look, which can enhance the overall appearance of your bathroom or shower room. ・ Durable construction: Made from high-quality materials, this floor gully is durable and built to last, ensuring reliable performance for years to come.
£88.49
McAlpine McAlpine 1.50 Top Access Bath Trap+O/F In Matt Black
The McAlpine 1.50 Top Access Bath Trap+O/F in Matt Black is a premium-quality plumbing component that is designed to provide efficient and effective waste management for a variety of applications. With its sleek and modern design, this bath trap adds a touch of elegance to any bathroom or other residential or commercial environment. Constructed from high-quality materials, this bath trap is built to last, ensuring long-lasting performance and durability. Its matt black finish not only gives it a stylish appearance but also makes it resistant to corrosion and wear, ensuring that it remains looking new for years to come. Featuring a 1.50-inch diameter, this bath trap is suitable for use with a wide range of baths and other plumbing fixtures. Its top access design allows for easy maintenance and cleaning, while its overflow feature helps to prevent water damage and flooding. Whether you're renovating a bathroom or working on a commercial project, the McAlpine 1.50 Top Access Bath Trap+O/F in Matt Black is the perfect choice. With its high-quality construction, efficient waste management capabilities, and stylish design, this bath trap is an essential component for any plumbing project. ・ Top access design: The McAlpine 1.50 Top Access Bath Trap+O/F in Matt Black features a top access design, which allows for easy access and cleaning of the trap without having to remove the entire bath. ・ Overflow function: This bath trap comes with an overflow function, which prevents water from overflowing and damaging your bathroom floor ・ Matt black finish: The matt black finish on this bath trap adds a touch of style to your bathroom, complementing a wide range of decor styles. ・ Durable construction: Made from high-quality materials, this bath trap is built to last and can withstand the rigors of daily use. ・ Easy to install: This bath trap is designed to be easy to install, making it a great option for both DIY enthusiasts and professional plumbers.
£48.99
McAlpine McAlpine 1.25 X 60Mm Clicker Waste Brass In Matt Black
The McAlpine 1.25 X 60Mm Clicker Waste Brass In Matt Black is a premium-quality plumbing component that is designed to provide reliable and efficient waste management for a variety of applications. With its sleek and modern design, this waste brass adds a touch of elegance to any bathroom, kitchen, or other commercial or residential environment. Made from high-quality brass, this clicker waste is built to last, ensuring long-lasting performance and durability. Its matt black finish not only gives it a stylish appearance but also makes it resistant to corrosion and wear, ensuring that it remains looking new for years to come. Featuring a 1.25-inch diameter and a 60mm length, this clicker waste is easy to install and suitable for use with a wide range of sinks and basins. Its innovative clicker mechanism allows for easy opening and closing, ensuring efficient and effective waste management. Whether you're renovating a bathroom or kitchen or working on a commercial project, the McAlpine 1.25 x 60mm CLICKER WASTE BRASS IN MATT BLACK is the perfect choice. With its high-quality construction, stylish design, and efficient waste management capabilities, this clicker waste is an essential component for any plumbing project. ・ Easy installation: The McAlpine 1.25 X 60Mm Clicker Waste Brass in Matt Black is designed to be easy to install, making it a great option for DIY enthusiasts and professional plumbers alike. ・ Clicker mechanism: The clicker mechanism in this waste brass makes it easy to operate, allowing you to open and close the drain with a simple push of a butto ・ Brass construction: Made from durable brass, this waste brass is built to last and can withstand the rigors of daily use ・ Matt black finish: The matt black finish on this waste brass adds a touch of style to your bathroom, complementing a wide range of decor styles. ・ Efficient drainage: With a 1.25-inch diameter and a 60mm length, this waste brass provides efficient drainage for your sink or basin, ensuring that water flows away quickly and easily.
£33.99
McAlpine McAlpine RW2 1½" Trap Inlet Washer
The McAlpine Trap 1-1/2 In Rubber Washer RW2 is a small rubber washer designed to be used with McAlpine 1-1/2 inch traps. The washer is made from durable rubber and is designed to provide a tight and secure seal between the trap and the waste pipe. The purpose of the trap washer is to prevent water and other waste materials from leaking out of the trap and causing damage or creating unpleasant odors. By creating a tight seal between the trap and the waste pipe, the washer helps to ensure that waste materials flow smoothly and efficiently through the plumbing system. The McAlpine Trap 1-1/2 In Rubber Washer RW2 is easy to install and can be used with a wide range of McAlpine traps. It is also designed to be long-lasting, providing a reliable and effective seal for years to come. Overall, the McAlpine Trap 1-1/2 In Rubber Washer RW2 is an essential component for any plumbing system that uses McAlpine 1-1/2 inch traps. Its durable construction and reliable performance make it a popular choice for plumbers and homeowners alike. ・ Available in 1¼", 1½", and 2" sizes ・ Full range of spare parts and accessories are available on The Plumbers Mate
£3.99
McAlpine McAlpine RW1 1¼" Trap Inlet Washer
The McAlpine Trap 1-1/4 In Rubber Washer RW1 is a small rubber washer designed to be used with McAlpine 1-1/4 inch traps. The washer is made from durable rubber and is designed to provide a tight and secure seal between the trap and the waste pipe. The purpose of the trap washer is to prevent water and other waste materials from leaking out of the trap and causing damage or creating unpleasant odors. By creating a tight seal between the trap and the waste pipe, the washer helps to ensure that waste materials flow smoothly and efficiently through the plumbing system. The McAlpine Trap 1-1/4 In Rubber Washer RW1 is easy to install and can be used with a wide range of McAlpine traps. It is also designed to be long-lasting, providing a reliable and effective seal for years to come. Overall, the McAlpine Trap 1-1/4 In Rubber Washer RW1 is an essential component for any plumbing system that uses McAlpine 1-1/4 inch traps. Its durable construction and reliable performance make it a popular choice for plumbers and homeowners alike. ・ Available in 1¼", 1½", and 2" sizes ・ Full range of spare parts and accessories are available on The Plumbers Mate
£3.99
McAlpine McAlpine R-3M ¾" x 3M length HDPE White Overflow Pipe
The McAlpine R-3M is a 3-meter length of white High-Density Polyethylene (HDPE) overflow pipe designed to be used with McAlpine tank overflow connectors. It has a ¾" diameter and is designed to handle overflow from tanks, cisterns, and other similar applications. HDPE is a popular material for pipes due to its high strength, durability, and resistance to corrosion and chemicals. This makes it an ideal choice for use in situations where it may come into contact with harsh chemicals or other potentially damaging substances. The McAlpine R-3M overflow pipe is easy to install and can be cut to size as needed. It is also compatible with a wide range of McAlpine tank overflow connectors, ensuring that it can be used with a variety of different systems. Overall, the McAlpine R-3M HDPE overflow pipe is a reliable and durable solution for handling overflow from tanks and other similar applications. Its high-quality construction ensures that it will last for years to come, and its compatibility with McAlpine tank overflow connectors makes it a popular choice for many plumbers and homeowners.
£2.99
McAlpine McAlpine ST90CB10-53 90mm Shallow Shower Trap - 53mm High
The McAlpine ST90CB10-53 is a slimline shower trap designed to provide a water seal and prevent foul smells from entering your bathroom. It is a 90mm x 25mm trap with a 1.5" solvent weld outlet, making it suitable for use with a wide range of shower waste pipes. The trap is made from high-quality materials, ensuring that it is durable and long-lasting. It has a slimline design, which makes it ideal for use in shallow shower trays where space is limited. The trap also features a removable 10mm water seal, which allows for easy cleaning and maintenance. The McAlpine ST90CB10-53 trap is easy to install and can be fitted directly onto a 1.5" solvent weld outlet. The trap also features a universal compression fitting, which allows for easy connection to a wide range of shower waste pipes. Overall, the McAlpine ST90CB10-53 is a reliable and efficient solution for preventing foul smells from entering your bathroom. Its slimline design makes it ideal for use in shallow shower trays where space is limited, and its high-quality construction ensures that it is durable and long-lasting. The removable water seal also makes cleaning and maintenance easy, making it a popular choice for many homeowners and plumbers. ・ Flanges available in Chrome Plated Plastic, or Chrome Plated Brass ・ Suitable for shower trays with a 90mm waste hole ・ Overall height is only 53mm ・ Fixed with Stainless Steel Clamping Ring and 3 securing screws for tight connection to the shower tray ・ 25mm Water Seal
£40.49
McAlpine McAlpine ASA10W 75mm Water Seal Adjustable Inlet Tubular Swivel Basin Trap with 1¼" Multifit Outlet
The McAlpine ASA10W 75mm Water Seal Adjustable Inlet Tubular Swivel Basin Trap is a plumbing fitting used to connect a basin or sink waste pipe to the drainage system. It features a 1¼" Multifit Outlet and Centre Pin Waste, making it compatible with a range of waste pipes. The trap has an adjustable inlet which can be swivelled to different angles, allowing for flexible installation in tight spaces. The water seal ensures that foul odours and gases do not enter the room through the waste pipe, making it an essential component of any plumbing system. The McAlpine ASA10W is made from high-quality materials and is designed to be durable and long-lasting. It has a 75mm water seal, which is adjustable to suit the requirements of different installations. The 1¼" Multifit Outlet and Centre Pin Waste make it easy to connect to a range of waste pipes, ensuring compatibility with a wide range of plumbing systems. Installation of the McAlpine ASA10W is straightforward and can be done by a qualified plumber. The swivel inlet allows for flexible installation in tight spaces, making it suitable for use in a range of applications. Overall, the McAlpine ASA10W 75mm Water Seal Adjustable Inlet Tubular Swivel Basin Trap is a reliable and efficient solution for connecting a basin or sink waste pipe to the drainage system. It is a durable and long-lasting product that can help to ensure foul odours and gases do not enter the room through the waste pipe. The adjustable inlet and multifit outlet make it easy to install and ensure compatibility with a wide range of plumbing systems. ・ 75mm Water Seal ・ 1¼" Multifit Compression Outlet suits all plastic, copper and lead pipe ・ Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work ・ Complete with 60mm Ø Polished Stainless Steel Waste Flange, Centre Pin fixing and dry jointing Washers, Plug, CP Chain and Stay ・ Available as Anti-Syphon (Silentrap). Add suffix "V" to product code
£15.49
McAlpine McAlpine R40 1¼" Complete Screened Tank Overflow Connector
The McAlpine R40 Complete Screened Tank Overflow Connector is a plumbing fitting used to connect the overflow pipe of a water storage tank to the external drainage system. It features a quick-release filter and a standard model design for easy installation and maintenance. The screened overflow connector is designed to prevent debris, insects, and other unwanted materials from entering the water storage tank through the overflow pipe. The quick-release filter allows for easy cleaning and maintenance of the connector and ensures the flow of water is not disrupted. The McAlpine R40 is made from high-quality materials, which are durable and resistant to corrosion. The standard model design allows for easy installation and is compatible with a range of water storage tank models. Installation of the McAlpine R40 is straightforward and can be done by a qualified plumber. The fitting is designed to be compatible with a range of drainage systems and can be easily installed using standard plumbing techniques. Overall, the McAlpine R40 Complete Screened Tank Overflow Connector is a reliable and efficient solution for connecting the overflow pipe of a water storage tank to the external drainage system. It is a durable and long-lasting product that can help to ensure the water storage system is free from debris and unwanted materials. The quick-release filter and standard model design make it easy to install and maintain, ensuring the flow of water is not disrupted. ・ Available in ¾", 1", 1¼" and 1½" sizes ・ WRAS approved
£20.49
McAlpine McAlpine PUB-PB-1M 1½" x 70mm Pop-Up Push Button Bath Waste and Overflow
The McAlpine PUB-PB-1M 1½" x 70mm Polished Stainless Steel Flange Chrome Plated Brass Push Button Action Pop-Up Bath Waste and Overflow is a plumbing fitting used to drain water from a bathtub. It features a polished stainless steel flange, a chrome-plated brass push-button waste mechanism, and an overflow with a flexible cable and 1½" x 50mm water seal trap. The push-button waste mechanism allows the user to easily control the flow of water from the bathtub, while the overflow prevents water from overflowing and causing damage to the surrounding area. The flexible cable and water seal trap provide a secure and leak-free connection between the bathtub and the plumbing system. The McAlpine PUB-PB-1M is made from high-quality materials, which are durable and resistant to corrosion. The polished stainless steel flange and chrome-plated brass push-button waste mechanism give it a sleek and modern look that can complement a range of bathroom styles. Installation of the McAlpine PUB-PB-1M is straightforward and can be done by a qualified plumber. The fitting is designed to be compatible with a range of bathtub models and can be easily installed using standard plumbing techniques. Overall, the McAlpine PUB-PB-1M 1½" x 70mm Polished Stainless Steel Flange Chrome Plated Brass Push Button Action Pop-Up Bath Waste and Overflow is a reliable and efficient solution for draining water from a bathtub. It is a durable and long-lasting product that can help to ensure a secure and leak-free connection between the bathtub and the plumbing system. The push-button waste mechanism and flexible cable and water seal trap make it easy to use and control the flow of water from the bathtub. ・ Available in 3 cable/overflow lengths ・ Chrome Plastic Brass overflow with push button to operate CP Brass mushroom plug ・ Includes 1½" x 50mm water seal trap with Multifit outlet ・ Overall height of trap is only 110mm ・ Compression overflow connection to trap
£94.99
McAlpine McAlpine NUT-WMVALVE Female Blank Cap
The McAlpine NUT-WMVALVE Female Blank Cap is a plumbing fitting used to blank off appliance valves with a 3/4" thread. It is designed to fit onto the valve and create a watertight seal, preventing water from flowing through the valve and into the appliance. The blank cap is made from high-quality materials, which are durable and resistant to corrosion. It features a female thread on one end, which is designed to fit onto the 3/4" valve thread, and a blank cap on the other end, which seals off the valve. The McAlpine NUT-WMVALVE Female Blank Cap is designed to be easy to install and can be done by a qualified plumber. The blank cap is suitable for use in a range of plumbing applications, including in domestic and commercial settings. Overall, the McAlpine NUT-WMVALVE Female Blank Cap is a reliable and efficient solution for blanking off appliance valves. It is a durable and long-lasting product that can help to prevent leaks and ensure a secure and watertight seal. ・ Blanks off appliance valves with ¾" thread
£5.99
McAlpine McAlpine PUB-CP 1½" x 70mm Pop-Up Bath Waste and Overflow
The McAlpine PUB-CP 1½" x 70mm Polished Stainless Steel Flange Pop-Up Bath Waste and Overflow is a plumbing fitting used to drain water from a bathtub. It is designed to fit a 1½" waste outlet and features a polished stainless steel flange, a pop-up waste mechanism, and an overflow with a command knob. The pop-up waste mechanism allows the user to easily control the flow of water from the bathtub, while the overflow prevents water from overflowing and causing damage to the surrounding area. The command knob is used to open and close the pop-up waste mechanism. The McAlpine PUB-CP is made from high-quality materials, which are durable and resistant to corrosion. The polished stainless steel flange gives it a sleek and modern look that can complement a range of bathroom styles. Installation of the McAlpine PUB-CP is straightforward and can be done by a qualified plumber. The fitting is designed to be compatible with a range of bathtub models and can be easily installed using standard plumbing techniques. Overall, the McAlpine PUB-CP 1½" x 70mm Polished Stainless Steel Flange Pop-Up Bath Waste and Overflow is a reliable and efficient solution for draining water from a bathtub. It is a durable and long-lasting product that can help to ensure a secure and leak-free connection between the bathtub and the plumbing system. The pop-up waste mechanism and overflow with command knob make it easy to use and control the flow of water from the bathtub. ・ Flanges and Overflow/Command knob available in White or Chrome Plated Plastic, or Chrome Plated Brass ・ 1½" BSP ・ 70mm Stainless Steel flange ・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs ・ Flexible overflow tube has OD of 34mm
£50.99
McAlpine McAlpine MZ4L 2" 90° Multifit Bend x Plain End
The McAlpine 2" 90 Degree Multifit Bend X Plain End is a plumbing fitting used to create a 90 degree bend in a pipe. It is designed to fit a 2" pipe and features a multifit connection on one end and a plain end on the other. The multifit connection is designed to be compatible with a range of pipe materials, including copper, lead, and PVC. This makes it a versatile fitting that can be used in a variety of plumbing applications. The McAlpine 2" 90 Degree Multifit Bend X Plain End is made from high-quality materials, which are durable and resistant to corrosion. The 90 degree bend design allows for easy routing of pipes around corners and obstacles. Installation of the McAlpine 2" 90 Degree Multifit Bend X Plain End is straightforward and can be done by a qualified plumber. The fitting is designed to be compatible with a range of pipes and can be easily joined using solder, compression, or other appropriate methods. Overall, the McAlpine 2" 90 Degree Multifit Bend X Plain End is a reliable and efficient solution for creating a 90 degree bend in pipes. It is a durable and long-lasting product that can help to ensure a secure and leak-free connection between pipes. The multifit connection feature makes it a versatile and adaptable fitting that can be used in a range of plumbing applications. ・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe ・ Available in 1¼", 1½", and 2" sizes ・ Plain end designed to fit in to other fittings or Traps with a compression connection
£8.99
McAlpine McAlpine HWILF 1" In-Line Screened/Filter Pipe Coupling
The McAlpine 1" In-Line Screened Filter Pipe Coupling is a plumbing fitting used to connect two pipes of 1 inch diameter while also providing a filter to prevent debris from entering the plumbing system. The coupling has a built-in screen that filters out particles such as sand, grit, and other debris that could damage downstream equipment or cause blockages. This type of coupling is commonly used in plumbing systems that draw water from wells, rivers, or other sources where sediment may be present. The screen helps to protect pumps, valves, and other components from damage and prolong their lifespan. Installation of the McAlpine 1" In-Line Screened Filter Pipe Coupling is straightforward and can be done by a qualified plumber. The coupling is made from durable materials such as plastic or metal and is designed to withstand high water pressure and temperature. Overall, the McAlpine 1" In-Line Screened Filter Pipe Coupling is a reliable and effective solution for plumbing systems that require protection against debris and sediment. ・ Available in ¾", 1", 1¼", 1½" and 2" sizes
£15.99
McAlpine McAlpine HCN3365UK-1M Chrome Plated Brass Bath Filler and Overflow
The McAlpine HCN3365UK-1M is a chrome plated brass bath filler and overflow kit with a 1000mm long braided hose with a 90° bend. The kit includes a flexible overflow tube, a chrome plated brass waste outlet with a 70mm flange and a spring-loaded mushroom plug. The kit also comes with a 1½" x 50mm water seal bath trap with a multifit swivel outlet. ・ Available in 575mm or 1m Overflow lengths ・ 1½" Outlet ・ Compact filler design (70mm x 25mm) ・ Will fit overflow hole size 46mm-65mm and suitable for curved baths ・ Industry leading flow rates (0.5 bar=33l/min, 1 bar=44l/min, 2 bar=57l/min)
£135.99
McAlpine McAlpine HCN3365UK Chrome Plated Brass Bath Filler and Overflow
The McAlpine HCN3365UK is a bath filler and overflow kit designed for standard bath installations. The kit includes a 650mm long braided hose with a 90° bend, a flexible overflow tube, a chrome plated brass waste outlet with a 70mm flange and spring-loaded mushroom plug, and a 1½" x 50mm water seal bath trap with a multifit swivel outlet. The bath filler and overflow kit is made from high-quality chrome-plated brass, ensuring that it is durable and long-lasting. The chrome-plated finish provides a stylish and modern look that complements most bathroom décor. The 650mm long braided hose with a 90° bend provides flexibility and ease of installation, allowing for easy connection to the water supply. The flexible overflow tube helps to prevent blockages and ensures that water flows smoothly, while the chrome-plated brass waste outlet with a 70mm flange and spring-loaded mushroom plug provides a reliable and easy-to-use solution for closing the waste outlet. The 1½" x 50mm water seal bath trap with a multifit swivel outlet helps to prevent odors from entering the bathroom and provides a secure and reliable seal. Overall, the McAlpine HCN3365UK is a high-quality bath filler and overflow kit that provides a reliable and efficient solution for standard bath installations. Its chrome-plated brass finish, flexible overflow tube, and spring-loaded mushroom plug make it a popular choice for many bathroom installations, providing a combination of functionality and style. ・ Available in 575mm or 1m Overflow lengths ・ 1½" Outlet ・ Compact filler design (70mm x 25mm) ・ Will fit overflow hole size 46mm-65mm and suitable for curved baths ・ Industry leading flow rates (0.5 bar=33l/min, 1 bar=44l/min, 2 bar=57l/min)
£131.49
McAlpine McAlpine HCN3165UK-1M Chrome Plated Brass Bath Filler and Overflow
The McAlpine HCN3165UK-1M is a complete bath filler, overflow, and pop-up command knob kit designed for use with standard bath installations. The kit includes a 1000mm long braided hose with a 90° bend, a flexible overflow tube and pop-up cable, a 70mm chrome-plated brass waste flange and mushroom pop-up plug, and a 1½" x 50mm water seal bath trap with a multifit swivel outlet. The bath filler and overflow kit is made from high-quality materials, ensuring that it is durable and long-lasting. The chrome-plated brass finish provides a stylish and modern look that complements most bathroom décor. The 1000mm long braided hose with a 90° bend provides flexibility and ease of installation, allowing for easy connection to the water supply. The flexible overflow tube and pop-up cable help to prevent blockages and ensure that water flows smoothly, while the pop-up command knob provides easy control over the drain. The 70mm chrome-plated brass waste flange and mushroom pop-up plug provide a reliable and easy-to-use solution for closing the waste outlet, and the 1½" x 50mm water seal bath trap with a multifit swivel outlet helps to prevent odors from entering the bathroom and provides a secure and reliable seal. Overall, the McAlpine HCN3165UK-1M is a high-quality bath filler, overflow, and pop-up command knob kit that provides a reliable and efficient solution for standard bath installations. Its chrome-plated brass finish, flexible overflow tube and pop-up cable, and pop-up command knob make it a popular choice for many bathroom installations, providing a combination of functionality and style. ・ Available in 575mm or 1m Overflow lengths ・ 1½" Outlet ・ Compact filler design (70mm x 25mm) ・ Will fit overflow hole size 46mm-65mm and suitable for curved baths ・ Industry leading flow rates (0.5 bar=33l/min, 1 bar=44l/min, 2 bar=57l/min)
£135.99
McAlpine McAlpine HC2650UK-FIL-1M Chrome Plated Brass Bath Filler and Overflow
The McAlpine HC2650UK-FIL-1M is a chrome-plated brass bath filler and overflow kit designed for use with standard bath installations. The kit includes a 1000mm long braided hose with a 90° bend, a flexible overflow tube, a chrome-plated brass waste outlet with a 70mm flange and a removable top access spring-loaded mushroom plug, and a 1½" x 50mm water seal swivel bath trap with a universal outlet. The bath filler and overflow kit is made from high-quality materials, ensuring that it is durable and long-lasting. The chrome-plated brass finish provides a stylish and modern look that complements most bathroom décor. The 1000mm long braided hose with a 90° bend provides flexibility and ease of installation, allowing for easy connection to the water supply. The flexible overflow tube helps to prevent blockages and ensures that water flows smoothly. The chrome-plated brass waste outlet with a 70mm flange and removable top access spring-loaded mushroom plug provides a reliable and easy-to-use solution for closing the waste outlet. The 1½" x 50mm water seal swivel bath trap with a universal outlet helps to prevent odors from entering the bathroom and provides a secure and reliable seal. Overall, the McAlpine HC2650UK-FIL-1M is a high-quality bath filler and overflow kit that provides a reliable and efficient solution for standard bath installations. Its chrome-plated brass finish, flexible overflow tube, and removable top access spring-loaded mushroom plug make it a popular choice for many bathroom installations, providing a combination of functionality and style. ・ Available in 575mm or 1m Overflow lengths ・ 1½" Outlet ・ Compact filler design (70mm x 25mm) ・ Will fit overflow hole size 46mm-65mm and suitable for curved baths ・ Industry leading flow rates (0.5 bar=33l/min, 1 bar=44l/min, 2 bar=57l/min)
£135.99
McAlpine McAlpine HC2650UK-FIL Chrome Plated Brass Bath Filler and Overflow
The McAlpine HC2650UK-FIL is a chrome-plated brass bath filler and overflow kit designed for use with standard bath installations. The kit includes a 650mm long braided hose with a 90° bend, a flexible overflow tube, a chrome-plated brass waste outlet with a 70mm flange and a removable top access spring-loaded mushroom plug, and a 1½" x 50mm water seal swivel bath trap with a universal outlet. The bath filler and overflow kit is made from high-quality materials, ensuring that it is durable and long-lasting. The chrome-plated brass finish provides a stylish and modern look that complements most bathroom décor. The 650mm long braided hose with a 90° bend provides flexibility and ease of installation, allowing for easy connection to the water supply. The flexible overflow tube helps to prevent blockages and ensures that water flows smoothly. The chrome-plated brass waste outlet with a 70mm flange and removable top access spring-loaded mushroom plug provides a reliable and easy-to-use solution for closing the waste outlet. The 1½" x 50mm water seal swivel bath trap with a universal outlet helps to prevent odors from entering the bathroom and provides a secure and reliable seal. Overall, the McAlpine HC2650UK-FIL is a high-quality bath filler and overflow kit that provides a reliable and efficient solution for standard bath installations. Its chrome-plated brass finish, flexible overflow tube, and removable top access spring-loaded mushroom plug make it a popular choice for many bathroom installations, providing a combination of functionality and style. ・ Available in 575mm or 1m Overflow lengths ・ 1½" Outlet ・ Compact filler design (70mm x 25mm) ・ Will fit overflow hole size 46mm-65mm and suitable for curved baths ・ Industry leading flow rates (0.5 bar=33l/min, 1 bar=44l/min, 2 bar=57l/min)
£126.49
McAlpine McAlpine FVW1PC Combined Waste and Overflow for Vanity Basin
The McAlpine FVW1PC is a 1¼" Combined Waste and Overflow designed for use with vanity basins. It features a 60mm stainless steel flange, a chrome-plated overflow grid, and a plug and chrome plated chain. The combined waste and overflow is made from high-quality materials, ensuring that it is durable and long-lasting. It is designed to be easy to install and is suitable for use in a range of domestic and commercial applications. The chrome-plated overflow grid helps to prevent blockages and keep the vanity basin clean and hygienic. The plug and chrome plated chain provide a reliable and easy-to-use solution for closing the waste outlet. Overall, the McAlpine FVW1PC is a high-quality combined waste and overflow that provides a reliable and efficient solution for draining water from a vanity basin. Its stainless steel flange, chrome-plated overflow grid, and plug and chrome plated chain make it a popular choice for many plumbing applications, providing a combination of functionality and style. ・ 1¼" BSP ・ Chrome Plated Plastic overflow grid ・ Black PVC plug and CP chain ・ 60mm Stainless Steel flange ・ Flexible overflow tube has OD of 25mm
£10.99
McAlpine McAlpine FLEXKIT1 1½" Plumbing Kit for Adjustable Height Basin/Sink
The McAlpine Plumbing Kit for Adjustable Height Basin or Sink is a kit designed to provide a flexible and efficient solution for plumbing a basin or sink at an adjustable height. The kit includes a variety of components, including an adjustable trap, an extension tube, a compression fitting, and a variety of washers and seals. The adjustable trap is designed to accommodate a range of basin or sink heights, allowing for easy adjustment and installation. The extension tube provides additional flexibility, allowing the plumbing to be adjusted to the correct height for the specific installation. The compression fitting and accompanying washers and seals provide a reliable and leak-proof connection, ensuring that the plumbing system functions correctly over time. They are made from high-quality materials, ensuring that they are durable and long-lasting. Overall, the McAlpine Plumbing Kit for Adjustable Height Basin or Sink is a high-quality and flexible solution for plumbing installations that require adjustable heights. Its adjustable trap, extension tube, compression fitting, and washers and seals make it a popular choice for many plumbing applications, providing a combination of functionality and convenience. ・ 1½" Adjustable Inlet which can be cut to length for any installation ・ Supplied with 1½" x 1¼" Trap Inlet Reducer (T16) ・ 1½" Multifit Outlet ・ Flexible Outlet can be extended from 230mm to 750mm ・ Ideal for adjustable height basins or sinks
£59.99
McAlpine McAlpine Stainless Steel 150mm Shower Grid Tile Unit with Non-Return Valve FGT150-SV-110
The McAlpine FGT150-SV-110 is a 150mm square stainless steel tile designed for use in a range of plumbing applications. It features a silicone non-return valve and a removable grid, including a stainless steel mesh filter. The stainless steel tile is made from high-quality materials, ensuring that it is durable and long-lasting. It is designed to be easy to install and is suitable for use in a range of domestic and commercial applications. The silicone non-return valve helps to prevent backflow and ensure that water flows in the correct direction. It is a reliable and efficient solution for preventing water damage and maintaining the integrity of the plumbing system. The removable grid and stainless steel mesh filter help to keep the tile clean and hygienic, ensuring that it functions correctly over time. They are easy to remove and clean, making maintenance a simple and straightforward process. Overall, the McAlpine FGT150-SV-110 is a high-quality stainless steel tile that provides a reliable and efficient solution for plumbing installations. Its silicone non-return valve, removable grid, and stainless steel mesh filter make it a popular choice for many plumbing applications, providing a combination of functionality and convenience. ・ Push-fit outlet ・ Suitable for wet floor areas where 4"/110mm drainage pipework has been installed to the finished floor level ・ Internal non-return valve prevents foul air entering the building ・ The 150mm square tile can be fitted to a trapped or untrapped drain ・ Ideal for replacement and repair of a damaged tile or problem systems.
£34.99
