The McAlpine MACTUN-2 is a combined tundish and non-return valve that provides a reliable and efficient solution for protecting against backflow in a range of plumbing applications. Like the MACTUN-1, it is the only combined tundish and non-return valve with a silicone membrane seal, ensuring that it will not be affected by hard water areas.
The MACTUN-2 is made from high-quality materials that are resistant to corrosion and can withstand high temperatures. It features a silicone membrane seal that ensures a tight and reliable seal, even in hard water areas.
The tundish and non-return valve combination of the MACTUN-2 provides a reliable and efficient solution for protecting against backflow, which can cause damage to plumbing systems and create a risk of contamination. The non-return valve ensures that water flows in only one direction, while the tundish provides a visual indication of any excess water that may be present in the system.
Overall, the McAlpine MACTUN-2 is a reliable and efficient solution for protecting against backflow in a range of plumbing applications. Its high-quality materials, silicone membrane seal, and combined tundish and non-return valve design make it a durable and long-lasting choice for both residential and commercial plumbing systems. The MACTUN-2 is similar to the MACTUN-1, but may have different inlet and outlet sizes or other specific features that differentiate it from the MACTUN-1.
・ MACTUN incorporates a self closing membrane which opens to allow discharge to flow freely and then closes to form a seal. This prevents foul odour or sewer gas entering the building when installed into a waste or soil pipe.
・ The membrane seal has no spring mechanism and shall not be affected in hard water areas.
・ The membrane seal creates no resistance ensuring a smooth discharge flow from the PRV/TRV
・ Temperature Rating 100°C
・ The product is generally maintenance free. If required the top tundish window can be removed from the Mactun body for inspection or cleaning when maintenance work is being carried out.
The McAlpine CONFLEX-KIT1 is a flexible condensate pipe kit that includes all the necessary components to connect a condensing boiler to a condensate discharge pipe. The kit includes:
A 3m length of 25mm flexible pipe - This flexible pipe is made from high-quality materials that are resistant to corrosion and can withstand high temperatures. It is designed to provide a flexible joint that can accommodate any movement or vibration of the boiler or the discharge pipe, ensuring a secure and reliable connection.
6 x 25mm pipe clips - These pipe clips are used to secure the flexible pipe to the wall or other surfaces, ensuring that the pipe is held securely in place.
2 x Straight connectors with universal connection - These connectors are designed to be compatible with both 19/23mm rigid pipe and 25mm flexible pipe, making them a versatile choice for a range of applications. They feature a compression fitting that allows for easy installation and removal without the need for special tools or equipment.
1 x 1½" plain tail ABS solvent weld reducer - This reducer is used to connect the 25mm flexible pipe to a 19/23mm rigid pipe. It is made from high-quality materials that are resistant to corrosion and can withstand high temperatures, ensuring a reliable and long-lasting connection.
Overall, the McAlpine CONFLEX-KIT1 is a comprehensive and reliable solution for connecting a condensing boiler to a condensate discharge pipe. Its flexible pipe, universal connectors, and high-quality components ensure a secure and efficient connection, while the pipe clips and reducer make installation and maintenance easy and straightforward.
・ For use in installation of condensing boilers
・ Eliminate use of traditional rigid discharge pipe and fittings thereby allowing complete flexibility to discharge point
・ Includes fittings for easy connection to sanitary pipework
・ Allows for disconnection in freezing conditions for discharge to be redirected into a receptacle
・ Conforms to BS 6798:2014 and Building Regulations Approved Document H
The McAlpine CONFLEX-200 is a flexible connector that is designed to connect a condensing boiler to a rigid (19/23mm) or flexible (25mm) condensate discharge pipe. Like the CONFLEX-300, the CONFLEX-200 is also designed to provide a flexible joint that can accommodate any movement or vibration of the boiler or the discharge pipe, ensuring a secure and reliable connection.
The CONFLEX-200 is made from high-quality materials that are resistant to corrosion and can withstand high temperatures. The connector is constructed with a flexible EPDM rubber sleeve that is reinforced with a stainless steel braid for added strength and durability. The connector also features a compression fitting that allows for easy installation and removal without the need for special tools or equipment.
Similar to the CONFLEX-300, the CONFLEX-200 is also designed to prevent the backflow of condensate into the boiler. The connector features a built-in air break that ensures that any condensate that flows back into the connector is discharged safely and efficiently.
Compared to the CONFLEX-300, the CONFLEX-200 is slightly shorter and has a smaller diameter, making it a better option for boilers with tighter spaces or smaller pipes. However, it may not be as suitable for larger boilers or pipes as the CONFLEX-300.
Overall, the McAlpine CONFLEX-200 is a reliable and versatile connector that is ideal for connecting condensing boilers to condensate discharge pipes, especially in cases where space is limited or smaller pipes are involved.
・ Available in 200mm and 300mm lengths
・ Universal connections suitable for 19/23mm rigid pipe and 25mm flexible pipe
・ Easy connection to boiler condensate discharge pipe
・ Allows for disconnection in freezing conditions for discharge to be redirected into a receptacle
・ Conforms to BS 6798:2009 and Building Regulations Approved Document H
The McAlpine STWGR-CP 1½" Shower Grid is a component that is commonly used in shower systems. It is a chrome-plated brass grid that measures 1½ inches in diameter, and it is designed to fit over the drain in a shower tray or wet room floor.
The purpose of the shower grid is to prevent debris and hair from clogging the drain, while still allowing water to flow through freely. The grid has small holes or perforations that allow the water to pass through, while trapping any debris or hair on the surface.
The McAlpine STWGR-CP 1½" Shower Grid is a high-quality component that is designed to be durable and long-lasting. It is easy to install and maintain, and it is compatible with a wide range of shower systems.
・ Available in White, Chrome Plated or Gold Plated Plastic
The McAlpine STW80-TUBE is a dip tube designed to be used with the McAlpine STW range of 1½" shower traps. The dip tube is designed to fit inside the trap and extends down into the water, ensuring that any debris or waste is trapped and prevented from entering the drainage system.
The dip tube is made from high-quality materials and is designed to be durable and long-lasting. It is easy to install and can be fitted quickly and easily into the McAlpine STW range of shower traps.
When installing the McAlpine STW80-TUBE dip tube, it is important to ensure that it is securely fitted and positioned correctly inside the trap. The dip tube should be regularly cleaned and maintained to ensure that it continues to function effectively.
Overall, the McAlpine STW80-TUBE dip tube is a simple and effective solution for preventing debris and waste from entering the drainage system. Its compatibility with the McAlpine STW range of shower traps makes it a popular choice among plumbers and DIY enthusiasts who are looking for a reliable and efficient shower trap solution.
・ Available for 19mm, 50mm and 80mm Shower Traps
・ Suitable of use with STW range of 1½" Shower Traps
・ Full range of spare parts and accessories are available on The Plumbers Mate
The McAlpine WP3T is a white PVC plug designed for use in plumbing systems, specifically for 1 1/2" waste pipes or other plumbing fixtures. Like the McAlpine WP3, the WP3T plug is made from high-quality PVC material that is durable, resistant to corrosion and damage from chemicals.
The main difference between the WP3T and the WP3 is that the WP3T plug has a triangular shape at the end. This design allows the plug to fit more securely into pipes or fixtures with a slight triangular taper, providing a more effective seal and preventing any leaks or smells from escaping the pipe or fixture.
The WP3T plug is easy to install and remove, making it a convenient solution for plumbing maintenance and repairs. It is designed for use with McAlpine products, but can also be used with other compatible plumbing systems.
Overall, the McAlpine WP3T plug with triangle design is a reliable and effective solution for sealing off waste pipes and other plumbing fixtures. Its durable PVC construction, triangular shape, and easy-to-install design make it a dependable option for preventing leaks and odours in plumbing systems.
・ Available in 1½"and 1¾"
・ Available with or without triangle
・ Manufactured in White PVC
The McAlpine WP2H is a white plastic plug with a rubber seal and handle designed for use in plumbing systems. Like the WP2 plug, it is designed to fit into the end of a waste pipe or other plumbing fixture to prevent the flow of water or other fluids.
The WP2H plug is made from high-quality plastic material that is resistant to corrosion and damage from chemicals. The rubber seal provides a watertight and secure fit, preventing any leaks or smells from escaping the pipe or fixture. The handle on the plug allows for easier installation and removal of the plug, making it a convenient solution for plumbing maintenance and repairs.
The WP2H plug has a larger diameter than the WP1 plug, making it suitable for use in larger pipes or fixtures. It also has a more secure fit than the WP1 plug, making it ideal for use in applications where there is a risk of high pressure or force on the plug.
The WP2H plug is designed for use with McAlpine products, but can also be used with other compatible plumbing systems. It is easy to install and remove with the handle, making it a convenient solution for plumbing maintenance and repairs.
Overall, the McAlpine WP2H plug with rubber seal and handle is a reliable and effective solution for sealing off waste pipes and other plumbing fixtures. Its durable plastic construction, watertight rubber seal, and convenient handle make it a dependable option for preventing leaks and odours in plumbing systems.
・ Available in 1½"and 1¾"
・ Available with or without triangle
・ Manufactured in white polypropylene
The McAlpine WP1 is a white plastic plug with a rubber seal designed for use in plumbing systems. It is designed to fit into the end of a waste pipe or other plumbing fixture to prevent water or other fluids from flowing through the pipe or fixture.
The plug is made from durable plastic material, which is resistant to corrosion and damage from most chemicals commonly found in plumbing systems. The rubber seal provides a watertight and secure fit, preventing any leaks or smells from escaping the pipe or fixture.
The WP1 plug is designed for use with McAlpine products, but can also be used with other compatible plumbing systems. It is easy to install and remove, making it a convenient solution for plumbing maintenance and repairs.
Overall, the McAlpine WP1 plug with rubber seal is a simple and effective solution for sealing off waste pipes and other plumbing fixtures. Its durable plastic construction and watertight rubber seal make it a reliable option for preventing leaks and odours in plumbing systems.
・ Nozzle will connect to 1½" Multifit
・ Can accept discharge from a washing or dishwashing machine
・ Manufactured in polypropylene
The McAlpine WC Connector Seal WC-Outlet is a rubber seal designed to create a secure connection between a WC pan outlet and a soil pipe. The seal has a universal design and can be used with most types of WC connector, providing a tight and reliable seal to prevent leaks and odours. The seal is made from high-quality rubber that is resistant to chemicals and temperature changes, ensuring long-lasting performance. The McAlpine WC Connector Seal is easy to install and can help to save time and effort during plumbing installations or repairs.
・ Available in 2 lengths
・ Outlet fits 3½"/90mm inside diameter cast iron soil pipe
・ 97-107mm Inlet suits all pan spigots
・ Independent tests prove conclusively that there is no build-up of sediment in the flex
・ Enables easy installation of WC pans in awkward situations
The McAlpine W9PH-WH is a sink waste designed for use with 1 1/2" center pink sink applications. It features a white finish and a high-quality construction that ensures reliable performance and durability.
The W9PH-WH sink waste is made from polypropylene, a strong and durable material that can withstand the rigors of daily use. Its white finish is designed to complement a wide range of sink styles and decor, making it a versatile choice for many different applications.
This sink waste features a 1 1/2" center outlet and comes complete with a slotted waste plug and chain, allowing for easy and efficient water drainage. It is suitable for use with most standard sinks and meets all relevant plumbing standards, ensuring safe and reliable performance.
Overall, the McAlpine W9PH-WH sink waste is a high-quality plumbing fitting that provides a secure and efficient connection between the sink and waste pipe. Its strong and durable construction, white finish, 1 1/2" center outlet, and included slotted waste plug and chain make it a reliable and efficient choice for many different sink applications.
The McAlpine WPPH-II is a sink waste designed for use with 1 1/2" center pink sink applications. It features an ivory finish and a high-quality construction that ensures reliable performance and durability.
The WPPH-II sink waste is made from polypropylene, a strong and durable material that can withstand the rigors of daily use. Its ivory finish is designed to complement a wide range of sink styles and decor, making it a versatile choice for many different applications.
This sink waste features a 1 1/2" center outlet and comes complete with a slotted waste plug and chain, allowing for easy and efficient water drainage. It is suitable for use with most standard sinks and meets all relevant plumbing standards, ensuring safe and reliable performance.
Overall, the McAlpine WPPH-II sink waste is a high-quality plumbing fitting that provides a secure and efficient connection between the sink and waste pipe. Its strong and durable construction, ivory finish, 1 1/2" center outlet, and included slotted waste plug and chain make it a reliable and efficient choice for many different sink applications.
・ Available in 1½"and 1¾"
・ Available with or without triangle
・ Manufactured in White PVC
The McAlpine W3 1½" Backnut Sink Waste is a plumbing fitting designed for use with sinks, providing a secure and leak-free connection between the sink and the waste pipe. It features an 85mm white plastic flange, a 3½" tail, an unslotted waste design, and a plug.
The W3 Sink Waste is constructed from high-quality materials and meets all relevant plumbing standards, ensuring reliable performance and durability. It is suitable for use in domestic and commercial sink installations.
The 85mm white plastic flange of the McAlpine W3 Sink Waste provides a secure and leak-free connection to the sink, while the 3½" tail is suitable for most waste pipes, allowing for efficient water drainage. The unslotted waste design of the fitting does not include an overflow grid, making it suitable for applications where an overflow grid is not required. The plug is included to allow for easy closure of the waste pipe.
Overall, the McAlpine W3 1½" Backnut Sink Waste is a reliable and efficient plumbing fitting that provides a secure and leak-free connection between the sink and the waste pipe. Its high-quality construction, 85mm white plastic flange, 3½" tail, unslotted waste design, and plug make it easy to install and maintain, and ensure reliable performance and durability. It is a valuable addition to any plumbing toolkit.
・ Unslotted
・ 1½" BSP
・ 85mm flange
・ 3½" Tail
・ White Plastic Backnut
The McAlpine VSG52WH Two-Piece Valve Shower Gully is a plumbing fitting designed to provide a secure and efficient drainage solution for shower areas. It features a two-piece design consisting of a white plastic clamp ring and cover plate, and a removable grid with a 1½" horizontal outlet for connection to a waste pipe.
The Valve Shower Gully is constructed from high-quality materials and meets all relevant plumbing standards, ensuring reliable performance and durability. It is suitable for a variety of applications, including domestic and commercial shower areas.
The removable grid of the McAlpine VSG52WH Two-Piece Valve Shower Gully can be easily removed for cleaning and maintenance, helping to prevent blockages and ensuring efficient drainage. The white plastic clamp ring and cover plate provide a neat and attractive finish that blends seamlessly with the shower area.
The 1½" horizontal outlet of the McAlpine VSG52WH Two-Piece Valve Shower Gully ensures a secure and leak-free connection to a waste pipe. The horizontal outlet design is particularly suitable for installations where space is limited, allowing for a more compact installation.
Overall, the McAlpine VSG52WH Two-Piece Valve Shower Gully is a reliable and efficient plumbing fitting that provides a secure and efficient drainage solution for shower areas. Its removable grid, white plastic clamp ring and cover plate, and 1½" horizontal outlet make it easy to install, clean, and maintain. It is a valuable addition to any plumbing toolkit.
・ Available with a White Plastic Cover Plate with or without securing screws
・ 1½" BS EN 1329-1:2020 Solvent Weld Horizontal Outlet
・ Tiled/Stone floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ The valve acts as a non-return valve, the weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling.
The McAlpine VSG1T6SS Valve Shower Gully is a plumbing fitting that is designed to provide a secure and efficient drainage solution for a shower area. It features a removable tile grid for easy cleaning and maintenance and a 1½" horizontal outlet for connection to a waste pipe.
The Valve Shower Gully is made from high-quality materials and is designed to meet all relevant plumbing standards. It can be installed in a range of applications, including domestic and commercial shower areas.
The removable tile grid feature of the McAlpine VSG1T6SS Valve Shower Gully makes it easy to clean and maintain. The grid can be easily removed for cleaning, ensuring that the gully remains free from debris and blockages.
The 1½" horizontal outlet of the McAlpine VSG1T6SS Valve Shower Gully ensures a secure and leak-free connection to a waste pipe. The horizontal outlet design is particularly suitable for installations where space is limited, as it allows for a more compact installation.
Overall, the McAlpine VSG1T6SS Valve Shower Gully is a reliable and effective plumbing fitting that is designed to provide a secure and efficient drainage solution for a shower area. Its removable tile grid makes it easy to clean and maintain, and its 1½" horizontal outlet ensures a secure and leak-free connection to a waste pipe. It is sure to be a valuable addition to any plumbing toolkit.
・ Available with 150mm Polished Stainless Steel or White ABS Tile
・ 1½" BS EN 1329-1:2020 Solvent Weld Horizontal Outlet
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ The valve acts as a non-return valve, the weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling.
The McAlpine USG2SS-SL-SC is a plumbing fixture that includes an untrapped gully, a clamp ring, a cover plate, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The clamp ring and cover plate are designed to provide a secure and easy-to-install solution for covering the gully. The clamp ring ensures a tight fit between the gully and the cover plate, while the cover plate is designed to be easily removed for cleaning and maintenance.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2SS-SL-SC suitable for a variety of drainage systems.
Overall, the McAlpine USG2SS-SL-SC Untrapped Gully, Clamp Ring and Cover Plate, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The inclusion of the socket reducer allows for easy connection to a variety of pipework, making it a versatile solution for a range of plumbing applications. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2SS is a plumbing fixture that includes an untrapped gully, a clamp ring, a cover plate, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas and features a 2" vertical outlet.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. The absence of a water trap or seal in the gully means that odors and gases from the drainage system can enter the room, so it is important to ensure proper ventilation is in place.
The clamp ring and cover plate are designed to provide a secure and easy-to-install solution for covering the gully. The clamp ring ensures a tight fit between the gully and the cover plate, while the cover plate is designed to be easily removed for cleaning and maintenance.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2SS suitable for a variety of drainage systems.
Overall, the McAlpine USG2SS Untrapped Gully, Clamp Ring and Cover Plate, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The inclusion of the socket reducer allows for easy connection to a variety of pipework, making it a versatile solution for a range of plumbing applications. However, the absence of a water trap or seal in the gully means that proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine UPSW-3-22MM is a pumped shower waste outlet designed for use in situations where gravity-fed waste systems are not practical. It features a 70mm chrome plated brass flange with top access and a 22mm plain tail outlet.
Like the UPSW-3, this outlet is ideal for use in situations where the waste outlet is located below the level of the waste pipe, such as basement showers. The built-in pump helps to move water from the shower to the waste pipe, ensuring efficient and effective drainage.
The 70mm chrome plated brass flange provides a durable and stylish finish that is suitable for use in a wide range of shower systems. The top access design allows for easy cleaning and maintenance, while the 22mm plain tail outlet makes it easy to connect the pumped shower waste outlet to the waste pipe.
The UPSW-3-22MM is designed for easy installation and is suitable for use with a range of waste pipe materials. It is a reliable and effective solution for situations where a gravity-fed waste system is not possible.
Overall, the McAlpine UPSW-3-22MM is a practical and efficient solution for drainage needs in shower systems. Its built-in pump ensures efficient and effective drainage, while its 70mm chrome plated brass flange provides a durable and stylish finish. The top access design allows for easy cleaning and maintenance, and the 22mm plain tail outlet makes installation easy and ensures a secure connection to the waste pipe.
・ Available with 70mm or 85mm Chrome Plated Brass flange
・ 22mm plain tail outlet
・ Top access for easy cleaning
・ Fits 52mm waste hole
・ For use with pumped waste where normal gravity discharge is not possible
The McAlpine UPSW-2 is a pumped shower waste outlet designed to provide efficient drainage for shower systems. It features a 70mm chrome plated brass flange with top access and a 15mm plain tail outlet.
The pumped shower waste outlet is designed to be used in situations where a gravity-fed waste system is not possible, such as in basement showers or areas where the waste outlet is located below the level of the waste pipe. The UPSW-2 features a built-in pump that helps to move water from the shower to the waste pipe, ensuring efficient and effective drainage.
The 70mm chrome plated brass flange provides a durable and stylish finish, and is suitable for use in a wide range of shower systems. The top access design allows for easy cleaning and maintenance, and the 15mm plain tail outlet makes it easy to connect the pumped shower waste outlet to the waste pipe.
The pumped shower waste outlet is designed for easy installation, and is suitable for use with a range of waste pipe materials. It is a reliable and effective solution for situations where a gravity-fed waste system is not possible.
Overall, the McAlpine UPSW-2 is a practical and efficient solution for drainage needs in shower systems. Its built-in pump ensures efficient and effective drainage, while its 70mm chrome plated brass flange provides a durable and stylish finish. The top access design allows for easy cleaning and maintenance, and the 15mm plain tail outlet makes installation easy and ensures a secure connection to the waste pipe.
・ Available with 70mm or 85mm Chrome Plated Brass flange
・ 15mm plain tail outlet
・ Top access for easy cleaning
・ Fits 52mm waste hole
・ For use with pumped waste where normal gravity discharge is not possible
The McAlpine TSG-Innercup is a replacement inner cup for the McAlpine TSG1 waste valve. The TSG1 waste valve is a self-sealing waste valve that prevents foul odours and insects from entering the room via the waste pipe. The inner cup is a crucial component of the waste valve, as it forms a tight seal around the waste pipe and prevents any leakage.
Over time, the inner cup may become worn or damaged, which can compromise the effectiveness of the waste valve. The McAlpine TSG-Innercup is designed to be a direct replacement for the original inner cup, ensuring that the waste valve continues to operate at peak performance.
The TSG-Innercup is made from a durable, high-quality rubber material that is designed to withstand the harsh conditions of plumbing systems. It is easy to install and can be done with minimal tools and experience.
If you have a McAlpine TSG1 waste valve installed in your plumbing system and notice any signs of leakage or odours, it may be time to replace the inner cup. The TSG-Innercup is a reliable replacement option that can help extend the life of your waste valve and prevent costly repairs down the line.
McAlpine White Plastic Cover Plate & Insert Tube For Gully Tsg50Wcover+Tube is a product manufactured by McAlpine, a leading supplier of plumbing and drainage products in the UK.
This product is designed for use with McAlpine TSG50 Trapped Gullies, which are commonly used in commercial and industrial drainage systems. The cover plate and insert tube are used to provide a clean and hygienic finish to the gully, and to prevent debris from entering the drain.
The cover plate is made from white plastic and is designed to fit over the top of the gully. It has a diameter of 160mm and is secured in place using screws. The insert tube is also made from white plastic and is designed to fit inside the gully to provide additional protection against debris.
Overall, McAlpine White Plastic Cover Plate & Insert Tube For Gully Tsg50Wcover+Tube is a durable and reliable product that is designed to ensure the smooth operation of commercial and industrial drainage systems.
The McAlpine TSG50-ANTI/LIG is a type of trapped gully used in plumbing and drainage systems. It has a 50mm water seal, which helps to prevent foul odors and gases from entering the building. The gully features a clamp ring and cover plate design, which provides a secure and watertight seal.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, allowing it to be connected to a range of piping systems. The horizontal outlet is designed for easy connection to a waste pipe, while the socket reducer provides a secure connection to the main drainage system.
The TSG50-ANTI/LIG is specifically designed to prevent the ingress of insects and other small creatures into the plumbing system. It features an anti-ligature design, which makes it difficult for objects or materials to be attached to the gully, reducing the risk of blockages and maintaining the integrity of the plumbing system.
Overall, the McAlpine TSG50-ANTI/LIG is a practical and reliable trapped gully that provides excellent performance and helps to maintain the health and safety of the building's occupants by preventing the ingress of foul odors, gases, and insects. Its anti-ligature design makes it particularly useful in environments where this is a concern, such as hospitals, mental health facilities, and other public buildings.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG2WH-NSC is another type of trapped gully used in plumbing and drainage systems. It has a 75mm water seal, which helps to prevent foul odors and gases from entering the building. The gully features a clamp ring and cover plate design, which provides a secure and watertight seal.
The gully has a vertical solvent spigot outlet with a diameter of 110mm or 2", which allows it to be connected to a range of piping systems. The spigot outlet is designed for easy installation and a secure fit with solvent weld joints.
Overall, the McAlpine TSG2WH-NSC is a reliable and easy-to-install trapped gully that is suitable for a variety of plumbing and drainage applications.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 75mm Water Seal
・ 110mm Vertical Outlet
・ Supplied with110mm x 2" BS EN 1329-1:2000 solvent spigot outlet
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine 1 1/2" Multifit Loose Nut T8M is a plumbing component designed for use in waste pipe systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The loose nut is made from high-quality materials, ensuring durability and longevity. It features a Multifit design, which is compatible with a wide range of plumbing systems. The nut is designed to securely connect to a 1 1/2" waste pipe, providing a tight and leak-free fit.
The McAlpine 1 1/2" Multifit Loose Nut T8M is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in waste pipe systems for sinks, baths, showers, and other plumbing fixtures.
The loose nut is designed for easy installation and can be tightened by hand or with a wrench. It provides a secure and watertight seal, ensuring that waste water is properly managed and discharged. The nut is compatible with a wide range of pipe materials, including copper, lead, iron, PVC, and polypropylene.
Overall, the McAlpine 1 1/2" Multifit Loose Nut T8M is a reliable and effective plumbing component that provides a secure and efficient solution for connecting waste pipes to plumbing systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine 1 1/2" BSP Compression Nut T8B is a plumbing component designed for use in waste pipe systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The compression nut is made from high-quality materials, ensuring durability and longevity. It features a standard BSP thread and compression fitting, which is compatible with a wide range of plumbing systems. The nut is designed to securely connect to a 1 1/2" waste pipe, providing a tight and leak-free fit.
The McAlpine 1 1/2" BSP Compression Nut T8B is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in waste pipe systems for sinks, baths, showers, and other plumbing fixtures.
The compression fitting of the nut is designed for easy installation and can be tightened by hand or with a wrench. It provides a secure and watertight seal, ensuring that waste water is properly managed and discharged. The nut is compatible with a wide range of pipe materials, including copper, lead, iron, PVC, and polypropylene.
Overall, the McAlpine 1 1/2" BSP Compression Nut T8B is a reliable and effective plumbing component that provides a secure and efficient solution for connecting waste pipes to plumbing systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼", 1½", and 2" sizes
The McAlpine T5 Pushfit 90° Knuckle Overflow Bend x BSP Coupling Nut is a plumbing component designed for use in overflow systems. It is specifically designed and manufactured by McAlpine, a leading manufacturer of plumbing products.
The overflow bend is made from high-quality materials, ensuring durability and longevity. It features a 90° knuckle bend design, which provides a smooth and efficient flow of excess water in overflow systems. The pushfit mechanism makes it easy to install and requires no special tools or equipment.
The BSP coupling nut allows for easy and secure connection to the overflow pipe. It features a standard BSP thread, which is compatible with a wide range of plumbing systems.
The McAlpine T5 Pushfit 90° Knuckle Overflow Bend x BSP Coupling Nut is suitable for use in a wide range of plumbing applications, including in domestic, commercial, and industrial settings. It is ideal for use in overflow systems for sinks, baths, and other plumbing fixtures.
The pushfit mechanism of the overflow bend allows for easy and secure installation, ensuring a tight and leak-free fit. The 90° knuckle bend design provides a smooth flow of excess water, preventing any potential damage to plumbing fixtures and ensuring optimal performance of the overflow system.
Overall, the McAlpine T5 Pushfit 90° Knuckle Overflow Bend x BSP Coupling Nut is a reliable and effective plumbing component that provides a secure and efficient solution for managing excess water in overflow systems. It is easy to install, durable, and designed to withstand the rigors of plumbing environments.
・ Available in 1¼" and 1½" sizes
The McAlpine T22L is a 1 1/2-inch extension piece fitting that is used to extend the length of a pipe. The T22L is part of the Multifit range of plumbing fittings and pipes made by McAlpine.
The T22L extension piece features a push-fit connection on both ends, which allows for quick and easy installation. The connector is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to create a watertight seal between the two pipes.
The T22L extension piece is designed to be used with both plastic and copper pipes, and is suitable for use in a range of plumbing applications, including domestic and commercial installations. It's important to note that the T22L extension piece is designed specifically for use with the McAlpine Multifit system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T22L extension piece is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety.
・ Available in 1¼" and 1½" sizes
・ Overall Height is 7"
・ Effective length 5"
・ Available longer or shorter on application
The McAlpine 1 3/4" X 1 1/2" Bsp Female X Bsp Male Coupling T12B is a plumbing fitting used to connect two pipes of different sizes. It has a female end with a 1 3/4" BSP (British Standard Pipe) thread and a male end with a 1 1/2" BSP thread. This coupling is made of durable and corrosion-resistant materials to ensure long-lasting performance in plumbing systems. It is easy to install and provides a secure, leak-free connection between pipes. This coupling can be used in various plumbing applications, such as in water supply systems, heating systems, and waste systems.
・ Available in 9 sizes
・ Waste Outlet Reducer
The McAlpine STWGR-WH is a 1½" shower grid that is designed to be used with McAlpine shower traps. It is made from high-quality materials and has a durable construction that is designed to withstand regular use.
The shower grid is designed to prevent debris from entering the drainage system while allowing water to flow through freely. It features a white finish that is both stylish and easy to clean, and its simple design makes it easy to install and maintain.
The McAlpine STWGR-WH shower grid is suitable for use in a wide range of shower trays and enclosures, and its versatile design makes it a popular choice among plumbing professionals. It is compatible with McAlpine shower traps and can be used in conjunction with other McAlpine plumbing products to create a complete plumbing system.
Overall, the McAlpine STWGR-WH shower grid is a reliable and effective solution for preventing debris from entering the drainage system in a shower. Its high-quality construction and stylish design make it a popular choice among homeowners and plumbing professionals alike.
・ Available in White, Chrome Plated or Gold Plated Plastic
The McAlpine STW8-95 is a 50mm water seal shower trap with a universal outlet. It is designed to be used in conjunction with standard 1½" UK plumbing and is suitable for use with most shower trays and enclosures.
The water seal on the STW8-95 trap prevents foul odours from escaping from the drainage system, while the universal outlet ensures that it can be connected to a variety of waste pipes. The trap is constructed from high-quality materials to ensure durability and long-lasting performance, and is easy to install.
The STW8-95 shower trap has a low profile design, which makes it ideal for use in shallow shower trays. It also has a removable trap body, which makes it easy to clean and maintain.
Overall, the McAlpine STW8-95 shower trap is a reliable and effective solution for preventing foul odours from escaping from the drainage system. Its universal outlet and low profile design make it a versatile option that can be used in a wide range of shower trays and enclosures.
・ Available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 50mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 95° Bend - BSP coupling nut x 1½" Multifit
The McAlpine STW85WHL is a long waste designed for use with McAlpine STW 1½" shower traps. The waste is constructed from high-quality materials to ensure durability and long-lasting performance.
The STW85WHL waste is designed to fit standard 1½" UK plumbing and is easy to install. It is used with shower traps to prevent debris from entering the drainage system and causing blockages. The long design of the waste allows for greater flexibility in installation, making it ideal for situations where the shower trap is located further away from the waste outlet.
The McAlpine STW85WHL waste is a reliable and cost-effective option for use in shower traps where a longer waste is required. Its sturdy construction ensures that it can withstand regular use without cracking or breaking, while its long design allows for greater flexibility in installation. Overall, the STW85WHL waste is a great choice for anyone looking for an affordable and reliable solution to prevent blockages in their shower drainage system.
・ Available in White Plastic or Chrome Plated Plastic
・ Available in 70 or 85mm sizes
・ Suitable for all 1½" Shower Traps
・ Suit trays with a maximum thickness of 29mm
The McAlpine STW85WH is a standard waste designed for use with McAlpine STW 1½" shower traps. The waste is finished in white to match common bathroom decor, and is constructed from high-quality materials to ensure durability and long-lasting performance.
The STW85WH waste is designed to fit standard 1½" UK plumbing and is easy to install. It is used with shower traps to prevent debris from entering the drainage system and causing blockages. It is important to ensure that the waste is installed correctly and securely to prevent any leaks from occurring.
The McAlpine STW85WH waste is a reliable and cost-effective option for use in shower traps. Its white finish allows it to blend in with most bathroom designs, while its sturdy construction ensures that it can withstand regular use without cracking or breaking. Overall, the STW85WH waste is a great choice for anyone looking for an affordable and reliable solution to prevent blockages in their shower drainage system.
・ Available in White, Chrome Plated or Gold Plated Plastic, or Chrome Plated Brass
・ Available in 70 or 85mm sizes
・ Suitable for all 1½" Shower Traps
・ Suit trays with a maximum thickness of 22mm
The McAlpine STW75-TUBE is a dip tube designed for use with McAlpine STW 75mm shower traps. The dip tube is designed to be installed into the shower trap to extend the depth of the water seal.
The STW75-TUBE is made from high-quality materials and is designed to be durable and long-lasting. It is easy to install and is suitable for use with a variety of plumbing systems.
The dip tube is designed to ensure that the shower trap can effectively trap water and prevent any sewer gases from entering the bathroom. It helps to create a deeper water seal and ensure that the trap remains effective even in high-flow situations.
Overall, the McAlpine STW75-TUBE Dip Tube for Shower Traps is an important component of the shower trap system, ensuring that the trap remains effective at all times and the bathroom remains free from any unwanted sewer gases. It is a great addition to any bathroom using a McAlpine STW 75mm shower trap.
The McAlpine STW70SSM is a mushroom flange designed to be used with McAlpine STW 1½" shower traps. It is designed to fit over the waste pipe and provide a decorative finish to the installation.
The mushroom flange is made from high-quality stainless steel and is designed to be durable and long-lasting. It is easy to install and is suitable for use with a variety of plumbing systems.
The STW70SSM is designed to ensure that the shower trap installation looks neat and tidy, with a decorative finish that complements the bathroom decor. It also helps to prevent any potential for leaks around the waste pipe by providing a secure seal.
Overall, the McAlpine STW70SSM Mushroom Flange for STW 1½" Shower Traps is a great addition to any bathroom using a McAlpine STW 1½" shower trap, providing a decorative finish while also ensuring that the installation is secure and free from any leaks.
・ Available in White Plastic or Chrome Plated Stainless Steel
・ Available in 70 or 85mm sizes
The McAlpine STW70CPL is a long waste fitting designed to be used with McAlpine STW 1½" shower traps. It is designed to be installed between the shower tray or bathtub and the waste pipe and connects to the trap using a compression fitting.
The waste fitting is longer than standard fittings, which makes it suitable for use in situations where the waste pipe is positioned further away from the shower or bathtub. It is made from high-quality materials and is designed to be durable and long-lasting. It is easy to install and comes with a removable grid for easy access and cleaning.
The STW70CPL is designed to ensure that water flows away from the shower or bathtub quickly and efficiently, preventing any potential for standing water or blockages in the drain. It is also designed to be compatible with a variety of plumbing systems, making it a versatile solution for most bathrooms.
Overall, the McAlpine STW70CPL Long Waste for STW 1½" Shower Traps is a reliable and efficient solution for ensuring that your shower or bathtub remains free from standing water and blockages, particularly in situations where a longer waste fitting is required. It is a great addition to any bathroom using a McAlpine STW 1½" shower trap.
・ Available in White Plastic or Chrome Plated Plastic
・ Available in 70 or 85mm sizes
・ Suitable for all 1½" Shower Traps
・ Suit trays with a maximum thickness of 29mm
The McAlpine STW6M-95 is a shower trap with a water seal of 50mm, designed to prevent foul odours from entering the bathroom or shower area. It features a universal outlet that can be used with a variety of plumbing systems, making it a versatile solution for most bathrooms.
This trap is designed to be installed beneath a shower tray or bathtub and connects to the waste pipe. It collects water and debris that flows down the drain and prevents any unwanted odours from escaping back up through the pipe.
The STW6M-95 is made from durable materials and is easy to clean and maintain. It is also designed to be simple to install and includes a removable grid for easy access.
Overall, the McAlpine STW6M-95 50mm Water Seal Shower Trap with Universal Outlet is a reliable and efficient solution for ensuring that your shower or bathtub remains free from unpleasant smells, particularly in situations where a larger trap is necessary or when using a shower with a high flow rate.
・ Available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 50mm waste hole
・ 50mm Water Seal
・ 1½" BSP Thread
・ Supplied with 95° Bend - BSP coupling nut x 1½" Multifit
The McAlpine STW5-M is a shower trap with a water seal of 19mm, which helps to prevent foul smells from entering your bathroom or shower area. It features a universal outlet that can be used with a variety of plumbing systems.
This trap is designed to be installed beneath a shower tray or bathtub and connects to the waste pipe. It collects water and debris that flows down the drain and prevents any unwanted odours from escaping back up through the pipe.
The STW5-M is made from durable materials and is easy to clean and maintain. It is also compact in size, making it ideal for use in tight spaces.
Overall, the McAlpine STW5-M 19mm Water Seal Shower Trap with Universal Outlet is a reliable and efficient solution for ensuring that your shower or bathtub remains free from unpleasant smells.
・ Flanges available in White or Chrome Plated Plastic, or Chrome Plated Brass
・ Suitable for shower trays with a 50mm waste hole
・ 19mm Water Seal
・ 1½" BSP Thread
・ 1½" Universal Outlet
