JG Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread appliance, such as a tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x union nut flexi hose is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread appliance, such as a tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x union nut flexi hose is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
JG Speedfit radiator outlet plate allows 10mm pipes to be dropped down from above pipe runs to relevant radiator positions. This means all pipework is concealed within the wall and behind the radiator.The JG Speedfit radiator outlet plate creates a neat outlet for 10mm supply pipes to a radiator. To be used with single gang 25mm steel KO boxes to BS4662, fitted with rubber grommet.
Radiator outlet plate for 10mm pipe Ideal to mount within a standard 15mm single gang stainless steel KO box
Rubber grommet
Compatible with plastic or copper pipe (inserts required)
Suitable for central heating systems
John Guest push-fit unequal straight connector metric to imperial fitting converts imperial pipework to metric sizes. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Engineered to the highest quality, the fitting is suitable for foodstuff, potable liquids and inert gases. In accordance with the British Beer & Pub Association Code of Practice, fittings can also be used with N2/CO2 and mixed gas dispense lines, as well as air, pneumatic and vacuum applications. All John Guest fittings are manufactured and assembled in the UK.
Food grade material suitable for foodstuff, potable liquids, inert gases, air, pneumatic and vacuum
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Compatible with LLDPE or soft metal pipe/tubing
JG Speedfit slip connector push-fit fitting used to easily and quickly repair damaged pipe with a slip end connection for flexible adjustment. Simply push the push-fit fitting fully onto plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit slip connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (not suitable for central heating systems)
JG Speedfit plastic back plate elbow push-fit fitting and wall plate fixing for the quick and secure installation of FBSP type 90° connection. Simply push the push-fit fitting onto plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit plastic back plate elbow push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water use only (Max 65 °C)
JG Speedfit conversion connector push-fit fitting that enables imperial and metric pipes to be connected by converting the pipe size from metric to imperial. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (not suitable for central heating systems)
The JG Speedfit plug is for plugging unused ports on a Speedfit push-fit fitting. Designed, manufactured and assembled in the UK.
Compatible with Speedfit fittings only
Suitable for hot and cold water and central heating systems
The JG Speedfit plug is for plugging unused ports on a Speedfit push-fit fitting. Designed, manufactured and assembled in the UK.
Compatible with Speedfit fittings only
Suitable for hot and cold water and central heating systems
The JG Speedfit plug is for plugging unused ports on a Speedfit push-fit fitting. Designed, manufactured and assembled in the UK.
Compatible with Speedfit fittings only
Suitable for hot and cold water and central heating systems
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a minimum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for cold water use only
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a minimum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for cold water use only
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a minimum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for cold water use only
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit bent tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point (horizontal pipe runs). The tap connector comes complete with brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit bent tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit and hand-tighten connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit and hand-tighten connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit and hand-tighten connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit stem tee push-fit fitting for the connection of plastic or copper pipes. The stem tee joins two equal sized pipes with a spigot end for connecting a reduced sized Speedfit push-fit fitting, forming a swivel type connection. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit stem tee is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fittingis up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
