The McAlpine VSG1T6WH Valve Shower Gully is a plumbing fitting that is designed to provide a secure and efficient drainage solution for a shower area. It features a removable tile grid for easy cleaning and maintenance and a 1½" horizontal outlet for connection to a waste pipe.
The Valve Shower Gully is made from high-quality materials and is designed to meet all relevant plumbing standards. It can be installed in a range of applications, including domestic and commercial shower areas.
The removable tile grid feature of the McAlpine VSG1T6WH Valve Shower Gully makes it easy to clean and maintain. The grid can be easily removed for cleaning, ensuring that the gully remains free from debris and blockages.
The 1½" horizontal outlet of the McAlpine VSG1T6WH Valve Shower Gully ensures a secure and leak-free connection to a waste pipe. The horizontal outlet design is particularly suitable for installations where space is limited, as it allows for a more compact installation.
Overall, the McAlpine VSG1T6WH Valve Shower Gully is a reliable and effective plumbing fitting that is designed to provide a secure and efficient drainage solution for a shower area. Its removable tile grid makes it easy to clean and maintain, and its 1½" horizontal outlet ensures a secure and leak-free connection to a waste pipe. It is sure to be a valuable addition to any plumbing toolkit.
・ Available with 150mm Polished Stainless Steel or White ABS Tile
・ 1½" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ The valve acts as a non-return valve, the weight of the water discharge will open the valve and it will reseal when the discharge has ceased thus prohibiting foul air from entering the dwelling.
The McAlpine VP1 Ventapipe 25 Air Admittance Valve is a plumbing fitting that is designed to provide a one-way air admittance valve for a drainage system. It features a 1½" BSP threaded outlet and is suitable for use in applications where a mechanical vent pipe cannot be installed.
The Ventapipe 25 is made from high-quality materials and is designed to meet all relevant plumbing standards. It can be installed in a wide range of applications, including domestic and commercial drainage systems.
The one-way air admittance valve feature of the McAlpine VP1 Ventapipe 25 ensures that air can flow into the system to prevent the buildup of negative pressure, but prevents the escape of foul odors and gases into the environment.
The 1½" BSP threaded outlet of the McAlpine VP1 Ventapipe 25 makes it easy to connect to standard plumbing fittings and fixtures, and ensures a secure and leak-free connection.
Overall, the McAlpine VP1 Ventapipe 25 Air Admittance Valve is a reliable and effective plumbing fitting that is designed to provide a one-way air admittance valve for a drainage system. Its 1½" BSP threaded outlet makes it easy to install and connect to standard plumbing fittings and fixtures, and its one-way air admittance valve ensures that foul odors and gases are prevented from escaping into the environment. It is sure to be a valuable addition to any plumbing toolkit.
・ 1½" BSP thread on Outlet
・ A1 rated
・ Air flow capacity of 3 l/s
・ For full information on Air Admittance Valves please see below
The McAlpine V8 Pushfit Overflow Tee is a plumbing fitting designed to provide a connection point for an overflow pipe in a plumbing system. It is designed to be used with standard 21.5mm overflow pipe and features a pushfit connection for easy installation.
The Tee is made from high-quality materials and is designed to provide a secure and leak-free connection between the overflow pipe and the plumbing system. It has been rigorously tested to ensure that it meets all relevant plumbing standards and is suitable for use in a wide range of applications.
The pushfit connection feature of the McAlpine V8 Tee makes it a quick and easy fitting to install. The pushfit mechanism allows the Tee to be inserted directly into the plumbing system without the need for any additional tools or fittings, saving time and effort during installation.
Overall, the McAlpine V8 Pushfit Overflow Tee is a reliable and effective plumbing fitting that is designed to provide a secure and leak-free connection for overflow pipes. Its pushfit connection feature makes it a convenient choice for plumbers and DIY enthusiasts alike, and it is sure to be a valuable addition to any plumbing toolkit.
・ Available in 1¼" and 1½" sizes
The McAlpine V33T-FP Tee Piece is a plumbing fitting designed to connect a flush pipe to a toilet cistern. It features a universal connection at both ends, which allows it to be used with flush pipes that have a diameter of either 19mm or 23mm.
The Tee Piece is made from high-quality materials and is designed to provide a secure and leak-free connection between the flush pipe and the cistern. It has been rigorously tested to ensure that it meets all relevant plumbing standards and is suitable for use in a wide range of applications.
The universal connection feature of the McAlpine V33T-FP Tee Piece makes it a versatile and flexible choice for plumbers and DIY enthusiasts alike. It means that it can be used with a range of different flush pipe sizes, which can be particularly useful when working with older plumbing systems that may have non-standard pipe sizes.
Overall, the McAlpine V33T-FP Tee Piece is a reliable and effective plumbing fitting that is designed to provide a secure and leak-free connection between a toilet cistern and a flush pipe. Its universal connection feature makes it a versatile choice for a wide range of applications, and it is sure to be a valuable addition to any plumber's toolkit.
・ Not suitable for use with high level cisterns as installation into external flush pipe would cause malfunction of the syphonic flushing action
The McAlpine V33S-22 is a Tee Piece plumbing fitting with a 1½" BSP (British Standard Pipe) nut, a 1½" BSP thread, and a 19/23mm universal connection. The BSP nut and thread connections are commonly used in plumbing systems in the UK and other countries that follow the BSP standard. The universal connection allows for compatibility with a range of pipe sizes, making it a versatile fitting for waste water systems. The Tee Piece shape allows for a branch connection to be made off a main pipe or for two pipes to be connected at a right angle.
・ Not suitable for use with high level cisterns as installation into external flush pipe would cause malfunction of the syphonic flushing action
The McAlpine V24L is a 1 1/4" x 1 1/4" x 3/4" Surefit Swept Tee with a 19mm pushfit connection. It is a plumbing fitting designed for use in waste water systems. The swept tee allows for a smooth and gradual change in direction, reducing the risk of blockages or restrictions in the flow of waste water. The 19mm pushfit connection allows for easy installation and disconnection without the need for additional tools or fittings.
・ Available in 2 sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine 1 1/2" X 1 1/2" X 3/4" Surefit Swept Tee With 19Mm Pushfit Branch (V23L) is a plumbing fitting used for connecting pipes of different sizes and configurations. The tee is made of durable materials and features a swept design that reduces the likelihood of blockages and promotes efficient flow through the plumbing system.
The tee has a 1 1/2" inlet and two outlets, one with a 1 1/2" diameter and the other with a 3/4" diameter. The 3/4" outlet features a pushfit branch that can be connected to a 19mm pipe without the need for additional tools or fittings. The Surefit design of the tee ensures a secure and leak-free connection with compatible pipes and fittings.
Overall, the McAlpine V23L Surefit Swept Tee is a reliable and efficient plumbing component that can be used in a variety of applications, including in domestic and commercial plumbing systems.
・ Available in 2 sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine 1 1/2" x 1 1/4" Surefit Swept Tee V21L is a plumbing fitting designed for use in domestic and commercial drainage systems. The tee fitting is made of durable materials and is designed to provide a secure, leak-proof connection between pipes.
The "Surefit" feature of the tee fitting refers to McAlpine's patented design which allows for easy and secure connection of pipes. The tee fitting has a swept design which helps to prevent blockages and improve the flow of waste water through the drainage system.
The V21L model is specifically designed for use with 1 1/2" and 1 1/4" diameter pipes. The tee fitting can be used to create a T-junction in a drainage system, allowing for the connection of multiple pipes. The tee fitting is suitable for use with a range of materials including PVC, ABS, and copper pipes.
The McAlpine 1 1/2" x 1 1/4" Surefit Swept Tee V21L is a reliable and durable plumbing fitting that is ideal for use in a range of drainage systems. The tee fitting's patented design and swept features help to improve the flow of waste water, while the Surefit connection ensures a secure and leak-proof connection between pipes.
・ Available in 3 sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine 1 1/2" Surefit Swept Tee V1L is a plumbing fitting designed for use in domestic and commercial drainage systems. The tee fitting is made of durable materials and is designed to provide a secure, leak-proof connection between pipes.
The "Surefit" feature of the tee fitting refers to McAlpine's patented design which allows for easy and secure connection of pipes. The tee fitting has a swept design which helps to prevent blockages and improve the flow of waste water through the drainage system.
The V1L model is specifically designed for use with 1 1/2" diameter pipes. The tee fitting can be used to create a T-junction in a drainage system, allowing for the connection of multiple pipes. The tee fitting is suitable for use with a range of materials including PVC, ABS, and copper pipes.
The McAlpine 1 1/2" Surefit Swept Tee V1L is a reliable and durable plumbing fitting that is ideal for use in a range of drainage systems. The tee fitting's patented design and swept features help to improve the flow of waste water, while the Surefit connection ensures a secure and leak-proof connection between pipes.
・ Available in 3 sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine USG3WH is an untrapped gully designed for use in wet room areas and showers. It has a 1½" horizontal outlet and comes with a clamp ring and cover plate for secure installation. The untrapped design means that it does not have a water trap, which allows odors and gases from the drainage system to enter the room. Therefore, proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
The clamp ring and cover plate are designed to provide a secure and stable installation, while also allowing for easy access to the waste trap below. The cover plate is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity.
The 1½" horizontal outlet is suitable for standard 1½" pipework, making the McAlpine USG3WH compatible with a variety of drainage systems. The horizontal outlet allows for easy installation and connection to existing pipework.
Overall, the McAlpine USG3WH is a reliable and efficient plumbing fixture that is designed to provide effective drainage for wet room areas and showers. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 1½" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG3T6SS Untrapped Gully is a plumbing fixture that includes a tile/grating with a removable grid and a 1½" horizontal outlet. It is designed to be used as a floor gully in wet room areas or shower areas.
The gully is untrapped, which means that it does not include a water trap to prevent odors and gases from the drainage system from entering the room. As a result, proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
The tile/grating with a removable grid is designed to provide a stable and secure base for the gully while allowing for easy access to the waste trap below. The tile/grating is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity.
The 1½" horizontal outlet allows for easy connection to standard 1½" pipework, making the McAlpine USG3T6SS suitable for a variety of drainage systems.
Overall, the McAlpine USG3T6SS Untrapped Gully, Tile/Grating with Removable Grid, 1½" Horizontal Outlet is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. It is similar to the McAlpine USG3-T150SS, but with a different code, indicating a different cover and grating. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
The McAlpine USG3-T150SS Untrapped Gully is a plumbing fixture that includes a tile/grating with a removable grid and a 1½" horizontal outlet. It is designed to be used as a floor gully in wet room areas or shower areas.
The gully is untrapped, which means that it does not include a water trap to prevent odors and gases from the drainage system from entering the room. As a result, proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
The tile/grating with a removable grid is designed to provide a stable and secure base for the gully while allowing for easy access to the waste trap below. The tile/grating is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity.
The 1½" horizontal outlet allows for easy connection to standard 1½" pipework, making the McAlpine USG3-T150SS suitable for a variety of drainage systems.
Overall, the McAlpine USG3-T150SS Untrapped Gully, Tile/Grating with Removable Grid, 1½" Horizontal Outlet is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The T150SS in the product code indicates that it includes a stainless steel lid. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
The McAlpine USG3SS-SL-NSC is a plumbing fixture that includes an untrapped gully, clamp ring, cover plate, and a 1½" horizontal outlet. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The 1½" horizontal outlet allows for easy connection to standard 1½" pipework, making the McAlpine USG3SS-SL-NSC suitable for a variety of drainage systems.
The clamp ring and cover plate provide a secure and stable installation of the gully. The cover plate is removable, making cleaning and maintenance of the gully easy and efficient.
Overall, the McAlpine USG3SS-SL-NSC Untrapped Gully, Clamp Ring and Cover Plate, 1½" Horizontal Outlet is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The SL in the product code indicates that it includes a stainless steel lid, and the NSC indicates that it is non-vented, which means that it does not have a venting pipe attached to it for the purpose of relieving air pressure in the drainage system. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 1½" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2WH is a plumbing fixture that includes an untrapped gully, clamp ring, cover plate, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The clamp ring and cover plate provide a secure and stable installation of the gully. The cover plate is removable, making cleaning and maintenance of the gully easy and efficient.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2WH suitable for a variety of drainage systems.
Overall, the McAlpine USG2WH Untrapped Gully, Clamp Ring and Cover Plate, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2T6WH is a plumbing fixture that includes an untrapped gully with a 2" vertical outlet. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The 2" vertical outlet allows for easy connection to standard 2" pipework, making the McAlpine USG2T6WH suitable for a variety of drainage systems.
Overall, the McAlpine USG2T6WH Untrapped Gully with 2" Vertical Outlet is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
The McAlpine USG2T6SS is a plumbing fixture that includes an untrapped gully, a tile/grating with a removable grid, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The tile/grating with a removable grid provides a stylish and functional finish to the gully. The removable grid makes cleaning and maintenance of the gully easy and efficient.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2T6SS suitable for a variety of drainage systems.
Overall, the McAlpine USG2T6SS Untrapped Gully, Tile/Grating with Removable Grid, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The inclusion of the tile/grating with a removable grid provides a stylish and functional finish to the gully, while the socket reducer allows for easy connection to a variety of pipework. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with Polished Stainless Steel Tile with or without securing screws
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2-T150SS is a plumbing fixture that includes an untrapped gully, a tile/grating with a removable grid, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The tile/grating with a removable grid provides a stylish and functional finish to the gully. The removable grid makes cleaning and maintenance of the gully easy and efficient.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2-T150SS suitable for a variety of drainage systems.
Overall, the McAlpine USG2-T150SS Untrapped Gully, Tile/Grating with Removable Grid, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The inclusion of the tile/grating with a removable grid provides a stylish and functional finish to the gully, while the socket reducer allows for easy connection to a variety of pipework. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with Polished Stainless Steel Tile with or without securing screws
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2SS-SL-NSC is a plumbing fixture that includes an untrapped gully, a clamp ring, a cover plate, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The clamp ring and cover plate are designed to provide a secure and easy-to-install solution for covering the gully. The clamp ring ensures a tight fit between the gully and the cover plate, while the cover plate is designed to be easily removed for cleaning and maintenance.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2SS-SL-NSC suitable for a variety of drainage systems.
Overall, the McAlpine USG2SS-SL-NSC Untrapped Gully, Clamp Ring and Cover Plate, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The inclusion of the socket reducer allows for easy connection to a variety of pipework, making it a versatile solution for a range of plumbing applications. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2-R125SS is a plumbing fixture that is designed to be used as a floor gully in wet room areas or shower areas. It features an untrapped gully with a 2" vertical outlet, making it suitable for use with standard 2" pipework.
The gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
One of the key features of the McAlpine USG2-R125SS is that it is untrapped, meaning that there is no water trap or seal built into the fixture. While this can increase the risk of unpleasant odors and gases from the drainage system entering the room, it can also make it easier to maintain and clean the gully.
The 2" vertical outlet on the gully is designed to be compatible with standard plumbing fittings and pipework, allowing for easy installation and connection to the existing drainage system.
The McAlpine USG2-R125SS is suitable for use with tiled or concrete floors and can be used in both residential and commercial settings. It is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas.
Overall, the McAlpine Untrapped Gully With 2" Vertical Outlet USG2-R125SS is a high-quality plumbing fixture that is designed to provide efficient and reliable drainage for wet room areas or shower areas.
The McAlpine USG1WH-NSC is a plumbing fixture that includes an untrapped gully, a clamp ring, and a cover plate. It is designed for use with pumped waste systems in situations where gravity drainage is not possible.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage. It is designed to be used as a floor gully in wet room areas or shower areas where waste needs to be pumped out.
The gully features a 22mm horizontal plain outlet that is designed to be compatible with standard plumbing fittings and pipework. The absence of a water trap or seal in the gully means that odors and gases from the drainage system can enter the room, so it is important to ensure proper ventilation is in place.
The clamp ring and cover plate are designed to provide a secure and easy-to-install solution for covering the gully. The clamp ring ensures a tight fit between the gully and the cover plate, while the cover plate is designed to be easily removed for cleaning and maintenance.
The McAlpine USG1WH-NSC is designed for use with pumped waste systems, which use a pump to move wastewater from the gully to a higher drainage point where it can be discharged by gravity. This makes it an ideal solution for situations where traditional gravity drainage is not possible, such as in basements or other areas below ground level.
Overall, the McAlpine USG1WH-NSC Untrapped Gully, Clamp Ring and Cover Plate, 22mm Horizontal Plain Outlet for use with pumped waste is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas in situations where traditional gravity drainage is not possible.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 22mm Horizontal Plain Outlet for use with pumped waste
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ Overall height 44.5mm
The McAlpine USG1T6WH is a plumbing fixture designed to be used as a floor gully for draining wastewater from shower areas, wet rooms, or other similar spaces. It is made of high-quality, durable materials that are resistant to corrosion and chemical damage.
The gully features a 22mm horizontal plain outlet, which allows for easy and efficient drainage of wastewater. The outlet is designed to be compatible with standard plumbing fittings and pipework.
One of the key features of the McAlpine USG1T6WH is that it is untrapped. This means that there is no water trap or seal built into the fixture. While this can increase the risk of unpleasant odors and gases from the drainage system entering the room, it can also make it easier to maintain and clean the gully.
The McAlpine USG1T6WH is designed to be installed into a pre-formed floor, and it comes with a removable grate for easy access to the waste trap below. It is suitable for use with tiled or concrete floors, and it can be used in both residential and commercial settings.
Overall, the McAlpine Untrapped Gully with 22mm Horizontal Plain Outlet USG1T6WH is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas.
The McAlpine USG1-T150SS is an untrapped gully designed for use with pumped waste systems. It features a tile/grating with removable grid for easy access and cleaning. The gully has a 22mm horizontal plain outlet and is made of stainless steel for durability and corrosion resistance. The "T150" in the product code refers to the size of the tile/grating, which measures 150mm x 150mm. The gully is suitable for use in wet rooms, shower areas, and other locations where water needs to be drained away.
・ Available with Polished Stainless Steel Tile with or without securing screws
・ 22mm Horizontal Plain Outlet for use with pumped waste
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ Overall height 44.5mm
The McAlpine USG1SS is an untrapped gully designed for use with pumped waste systems. It features a 22mm horizontal plain outlet that is designed to be connected to a waste pipe using standard plumbing techniques.
The gully includes a clamp ring and cover plate that are designed to securely hold the waste pipe in place, ensuring a leak-free connection. This helps to prevent any wastewater from escaping and causing damage to surrounding areas.
The USG1SS is untrapped, which means that it does not include a water trap. This makes it ideal for use in pumped waste systems, where the pump is used to create enough pressure to force the wastewater through the pipe without the need for a water trap.
The gully also features a durable stainless steel construction, which makes it suitable for use in a variety of different weather conditions. The stainless steel construction also ensures that the gully is resistant to rust and corrosion, providing long-lasting durability and performance.
Overall, the McAlpine USG1SS is a reliable and effective solution for untrapped gully needs in pumped waste systems. Its 22mm horizontal plain outlet makes it easy to connect to a waste pipe, while its clamp ring and cover plate ensure a secure and leak-free connection. The gully's durable stainless steel construction ensures long-lasting durability and performance.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 22mm Horizontal Plain Outlet for use with pumped waste
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
・ Overall height 44.5mm
The McAlpine UPSW-2-22MM is a pumped shower waste outlet designed for efficient drainage of shower systems. It features a 70mm chrome plated brass flange with top access and a 22mm plain tail outlet.
The pumped shower waste outlet is ideal for use in situations where gravity-fed waste systems are not feasible, such as basement showers or areas where the waste outlet is located below the level of the waste pipe. The UPSW-2-22MM features a built-in pump that helps to move water from the shower to the waste pipe, ensuring efficient and effective drainage.
The 70mm chrome plated brass flange provides a durable and stylish finish that is suitable for use in a wide range of shower systems. The top access design allows for easy cleaning and maintenance, and the 22mm plain tail outlet makes it easy to connect the pumped shower waste outlet to the waste pipe.
The pumped shower waste outlet is designed for easy installation and is suitable for use with a range of waste pipe materials. It is a reliable and effective solution for situations where a gravity-fed waste system is not possible.
Overall, the McAlpine UPSW-2-22MM is a practical and efficient solution for drainage needs in shower systems. Its built-in pump ensures efficient and effective drainage, while its 70mm chrome plated brass flange provides a durable and stylish finish. The top access design allows for easy cleaning and maintenance, and the 22mm plain tail outlet makes installation easy and ensures a secure connection to the waste pipe.
・ Available with 70mm or 85mm Chrome Plated Brass flange
・ 22mm plain tail outlet
・ Top access for easy cleaning
・ Fits 52mm waste hole
・ For use with pumped waste where normal gravity discharge is not possible
The McAlpine TWLFCV is a screened breather, filter, and frost cover designed to prevent debris, insects, and frost from entering the waste system through the open end of a pipe. It features a compression joint that allows it to be easily connected to a waste pipe.
The TWLFCV is designed to fit onto the open end of a waste pipe and prevent debris, insects, and frost from entering the system. The screened breather allows air to flow freely into the system, preventing the buildup of pressure that can cause damage to the pipes. The filter prevents larger debris from entering the system, reducing the risk of blockages and other issues.
The frost cover helps to protect the system from damage caused by freezing temperatures, by preventing water from entering the system and expanding when it freezes. This helps to prevent pipes from bursting and other damage that can occur during freezing conditions.
The compression joint on the TWLFCV makes it easy to install and remove, allowing for quick and easy maintenance of the waste system. The joint ensures a secure and leak-free connection to the waste pipe, helping to prevent leaks and other issues that can occur with poorly connected components.
Overall, the McAlpine TWLFCV is a reliable and effective solution for preventing debris, insects, and frost from entering a waste system. Its screened breather and filter help to maintain airflow and prevent blockages, while its frost cover helps to protect the system from damage caused by freezing temperatures. The compression joint makes installation and maintenance quick and easy, ensuring a secure and leak-free connection to the waste pipe.
・ Available in 1¼" and 1½" sizes
The McAlpine TUN-3CP is a plumbing component that is designed to provide a solution for the discharge of water from a washing machine or dishwasher. Specifically, it is a one-piece side inlet Tun Dish with a ¾" inlet and a 19/23mm universal outlet, finished in chrome.
The Tun Dish is a shallow plastic container that is placed under a washing machine or dishwasher to collect any water that may leak or overflow from the appliance. The one-piece design of the TUN-3CP with a side inlet makes it easy to install, and it is suitable for use in tight spaces where access may be limited.
The ¾" inlet is designed to connect to a standard washing machine or dishwasher hose, while the 19/23mm universal outlet is designed to connect to a wide range of waste pipes. This allows for easy connection to the existing waste system.
The McAlpine TUN-3CP is finished in chrome, giving it a modern and stylish appearance. It is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TUN-3CP provides a simple and effective solution for the discharge of water from washing machines and dishwashers, and is easy to install and maintain, especially in tight spaces where access may be limited. The chrome finish also adds a stylish touch to any kitchen or utility room.
・ Available in White or Chrome Plated Plastic
The McAlpine TUN-3 is a plumbing component that is designed to provide a solution for the discharge of water from a washing machine or dishwasher. Specifically, it is a one-piece side inlet Tun Dish with a ¾" inlet and a 19/23mm universal outlet.
The Tun Dish is a shallow plastic container that is placed under a washing machine or dishwasher to collect any water that may leak or overflow from the appliance. The one-piece design of the TUN-3 with a side inlet makes it easy to install, and it is suitable for use in tight spaces where access may be limited.
The ¾" inlet is designed to connect to a standard washing machine or dishwasher hose, while the 19/23mm universal outlet is designed to connect to a wide range of waste pipes. This allows for easy connection to the existing waste system.
The McAlpine TUN-3 is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TUN-3 provides a simple and effective solution for the discharge of water from washing machines and dishwashers, and is easy to install and maintain, especially in tight spaces where access may be limited.
・ Available in White or Chrome Plated Plastic
The McAlpine TUN-1 is a plumbing component designed to provide a solution for the discharge of water from a washing machine or dishwasher. Specifically, it is a 1½" Tun Dish with a ¾" Pushfit Outlet.
The Tun Dish is a shallow plastic container that is placed under a washing machine or dishwasher to collect any water that may leak or overflow from the appliance. The 1½" size of the dish is a standard size for waste pipes, which allows for easy connection to the existing waste system.
The ¾" Pushfit Outlet is designed to connect to a flexible waste pipe, which is then connected to the main waste system. This connection is designed to be easy to install and remove, allowing for easy maintenance and cleaning.
The McAlpine TUN-1 is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings.
Overall, the McAlpine TUN-1 provides a simple and effective solution for the discharge of water from washing machines and dishwashers, and is easy to install and maintain.
The McAlpine TT10 is a plumbing component that is designed to be used as a water trap for waste pipes, typically in kitchen or utility room applications. Specifically, it is a 75mm water seal running tubular 'P' trap with a 1½" Multifit Outlet and a plain spigot end for connection to a waste disposal unit.
The trap is designed to prevent unpleasant odors from entering a room by trapping a small amount of water in the bend of the 'P' trap. This creates a water seal that prevents sewer gases from entering the room. The 75mm water seal running tubular design of the trap ensures that it can handle high volumes of waste water while maintaining an effective water seal.
The 1½" Multifit Outlet allows for easy and secure connection to a wide range of waste pipes, while the plain spigot end is designed to connect directly to a waste disposal unit. The trap is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability.
Overall, the McAlpine TT10 is a reliable and effective plumbing component that is suitable for use in a wide range of applications, and is easy to install and maintain.
・ 75mm Water Seal
・ 1½" Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Suitable for connection to most waste disposal units
・ Available as Anti-Syphon (Silentrap). Add suffix "V" to product code
・ Manufactured in polypropylene
The McAlpine TSGSSTOP+TUBE is a combined stopper and overflow pipe for use with the McAlpine TSG1 and TSG2 waste valves. The TSGSSTOP+TUBE is designed to prevent the waste pipe from overflowing by diverting excess water into the overflow pipe, which is connected to a drain or other disposal system.
The TSGSSTOP+TUBE includes a stainless steel cover plate and insert tube, which provide a sleek and durable finish to the waste valve. The cover plate is designed to fit over the waste valve and hide any unsightly components, while the insert tube fits inside the waste valve and forms a tight seal around the waste pipe.
The stainless steel construction of the TSGSSTOP+TUBE provides excellent resistance to corrosion and wear, ensuring that the waste valve remains functional and attractive for years to come. The TSGSSTOP+TUBE is also easy to install and can be done with minimal tools and experience.
If you have a McAlpine TSG1 or TSG2 waste valve installed in your plumbing system and want to add a stopper and overflow pipe, the TSGSSTOP+TUBE is an excellent option. It provides reliable overflow protection while adding a stylish and durable finish to the waste valve.
The McAlpine TSGSTOP Stopper is a versatile accessory for use with several McAlpine Trapped Shower Gully Dip Tubes models, including the TSG1, TSG50, TSG52, and TSG2. The stopper is designed to be used with the dip tube to provide a watertight seal that prevents water from flowing down the waste pipe and into the drainage system.
The TSGSTOP Stopper is made from a durable rubber material that is designed to withstand the harsh conditions of plumbing systems. It is easy to install and can be done with minimal tools and experience. The stopper fits snugly into the dip tube, creating a watertight seal that prevents any leakage.
If you have a McAlpine Trapped Shower Gully Dip Tube installed in your plumbing system and need to stop the flow of water, the TSGSTOP Stopper is an excellent option. It is compatible with multiple McAlpine models, making it a versatile accessory to have on hand. Additionally, it is a cost-effective solution that can help prevent costly repairs down the line by ensuring that your plumbing system remains leak-free.
・ When after installation the Gully is not going to be used there is a possibility that the water seal will evaporate. The Stopper when inserted into the Dip Tube will prevent foul air entering the building
・ For use with Trapped Shower Gullies TSG1, TSG50, TSG52 and TSG2 models only, either sheet flooring or tiled floor versions.
The McAlpine White Stainless Steel Sheet Floor To Tiled Floor Gully Conversion Kit Tsgconvss is a product designed to convert a floor gully with a stainless steel sheet finish to a tiled floor gully. The kit includes a gully body, a tile frame, a tile frame seal, and a removable grid. It is made from high-quality stainless steel and is designed for use in wet rooms, shower areas, and other wet environments.
To install the kit, the existing gully body with the stainless steel sheet finish is removed and replaced with the new gully body provided in the kit. The tile frame is then inserted into the new gully body, and the tile frame seal is used to seal the joint between the tile frame and the tiled floor. Finally, the removable grid is inserted into the tile frame.
The McAlpine White Stainless Steel Sheet Floor To Tiled Floor Gully Conversion Kit Tsgconvss is a useful product for those who are looking to upgrade their wet room or shower area to a more modern and stylish look. It is easy to install and is made from high-quality materials that are built to last.
・ Conversion Kits enable Gullies except MD100, MD100-3 and FD90 to be converted to different floor finishes
The McAlpine White Plastic Sheet Floor to Tiled Floor Gully Conversion Kit Tsgc is a plumbing product designed to convert a sheet flooring gully into a tiled floor gully. The kit includes a white plastic clamp ring, cover plate, and dip tube, and is designed for use with 50mm water seal trapped gullies.
The conversion kit is designed for use with tiled flooring, which is often used in residential and commercial environments. The dip tube ensures that water is directed into the gully trap, while the white plastic clamp ring and cover plate provide a secure and durable cover for the gully.
The TSGC conversion kit is easy to install and can be used to upgrade existing gullies to accommodate tiled flooring. By using this kit, you can ensure that your drainage system is effective and efficient, while also providing a stylish and durable flooring solution for your residential or commercial environment.
Overall, the McAlpine White Plastic Sheet Floor to Tiled Floor Gully Conversion Kit Tsgc is a reliable and effective product that is designed to convert a sheet flooring gully into a tiled floor gully with a white plastic finish. Its easy installation and durable construction make it an ideal solution for residential and commercial environments where both functionality and style are important.
・ Conversion Kits enable Gullies except MD100, MD100-3 and FD90 to be converted to different floor finishes
The McAlpine Tiled to Sheet Floor Gully Conversion Kit Tsgcontvss-50 is a plumbing product designed to convert a tiled floor gully into a sheet flooring gully. The kit includes a polished stainless steel clamp ring, cover plate, and dip tube, and is designed for use with 50mm water seal trapped gullies.
The conversion kit is designed for use with sheet flooring, which is often used in commercial and industrial environments. The dip tube ensures that water is directed into the gully trap, while the polished stainless steel clamp ring and cover plate provide a secure and durable cover for the gully.
The TSGCONTVSS-50 conversion kit is easy to install and can be used to upgrade existing gullies to accommodate sheet flooring. By using this kit, you can ensure that your drainage system is effective and efficient, while also providing a stylish and durable flooring solution for your commercial or industrial environment.
Overall, the McAlpine Tiled to Sheet Floor Gully Conversion Kit Tsgcontvss-50 is a reliable and effective product that is designed to convert a tiled floor gully into a sheet flooring gully with a polished stainless steel finish. Its easy installation and durable construction make it an ideal solution for commercial and industrial environments where both functionality and style are important.
The McAlpine TSGCONTVSS Conversion Kit is a plumbing product designed to convert any TSG1 or TSG2 gully into a sheet flooring gully. The kit includes a polished stainless steel clamp ring, cover plate, and dip tube.
The conversion kit is designed for use with sheet flooring, which is often used in commercial and industrial environments. The dip tube ensures that water is directed into the gully trap, while the polished stainless steel clamp ring and cover plate provide a secure and durable cover for the gully.
The TSGCONTVSS conversion kit is easy to install and can be used to upgrade existing gullies to accommodate sheet flooring. By using this kit, you can ensure that your drainage system is effective and efficient, while also providing a stylish and durable flooring solution for your commercial or industrial environment.
Overall, the McAlpine TSGCONTVSS Conversion Kit is a reliable and effective product that is designed to convert any TSG1 or TSG2 gully into a sheet flooring gully with a polished stainless steel finish. Its easy installation and durable construction make it an ideal solution for commercial and industrial environments where both functionality and style are important.
・ Conversion Kits enable Gullies except MD100, MD100-3 and FD90 to be converted to different floor finishes
The McAlpine TSG52WH-NSC Two-Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. The clamp ring and cover plate provide a secure and durable cover for the gully.
Overall, the McAlpine TSG52WH-NSC Two-Piece 50mm Water Seal Trapped Gully is a reliable and sturdy product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the clamp ring and cover plate provide a secure and durable cover for the gully. The removable grid allows for easy access to the trap for maintenance, and the 50mm water seal helps to prevent foul odours from escaping through the drain.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
