JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further
fittings.
Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution.
Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
•Compact and space saving solution for centralizing system pipework
•Stem connection versions available to allow for manifold grouping
•Instant push-fit connection
•Install and demount in seconds without tools
•Safe flame-free installation, with no hot works, glue or flux
•5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex
•Grip & Seal collet with stainless steel teeth and main O-Ring seal
•Non-toxic, resists corrosion and no scale build-up
•Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe
•Suitable for hot, cold and central heating applications
JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further
fittings.
Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution.
Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
•Compact and space saving solution for centralizing system pipework
•Stem connection versions available to allow for manifold grouping
•Instant push-fit connection
•Install and demount in seconds without tools
•Safe flame-free installation, with no hot works, glue or flux
•5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex
•Grip & Seal collet with stainless steel teeth and main O-Ring seal
•Non-toxic, resists corrosion and no scale build-up
•Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe
•Suitable for hot, cold and central heating applications
JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further
fittings.
Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution.
Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
•Compact and space saving solution for centralizing system pipework
•Stem connection versions available to allow for manifold grouping
•Instant push-fit connection
•Install and demount in seconds without tools
•Safe flame-free installation, with no hot works, glue or flux
•5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex
•Grip & Seal collet with stainless steel teeth and main O-Ring seal
•Non-toxic, resists corrosion and no scale build-up
•Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe
•Suitable for hot, cold and central heating applications
Connects a supply to a tap or other fixture or appliance
JG Speedfit union nut flexi hose with service valve (braided) for the connection of pipe to a male thread appliance, such as a tap. The valve enables the flow of water to an appliance to be isolated in the event of an emergency or for maintenance work using a tamperproof _ turn screwdriver slot. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit union nut flexi hose with service valve (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Features and benefits
An alternative to hard piping to a tap or fixture
Integral service valve for isolation with an easy to operate handle
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
Plugs a connection port on a Speedfit fitting
The JG Speedfit plug is for plugging unused ports on a Speedfit push-fit fitting. Designed, manufactured and assembled in the UK.
The McAlpine Multifit Swept Tee 1.1/2" V1M-BL is a type of plumbing fitting used in waste pipe systems. It is designed to provide a smooth and uninterrupted flow of waste water and other liquids through the system.
The swept tee fitting has a 1.1/2" diameter, which makes it compatible with standard plumbing installations. It features a compression joint, which ensures a secure and tight fit without the need for special tools or adhesives.
The McAlpine Multifit Swept Tee 1.1/2" V1M is made from high-quality materials, ensuring its durability and resistance to wear and tear. It is a reliable and efficient solution for waste pipe systems, and its compact size and simple design make it a popular choice for both residential and commercial applications.
Overall, the McAlpine Multifit Swept Tee 1.1/2" V1M is a practical and reliable solution for waste pipe systems, providing a smooth and uninterrupted flow of waste water and other liquids. Its compression joint makes installation easy, and its high-quality materials ensure long-lasting performance. Colour: Black
_ Available in 1.25", 1.5", and 2" sizes
_ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe
The McAlpine MultiFit Reducer 1.1/2 X 1.1/4 ST28M-BL is a plumbing fitting used to connect two different sizes of pipes. This reducer is designed for use with plastic pipes and features a push-fit design, which means that it can be easily and quickly installed without the need for special tools or equipment.
The 1.1/2 X 1.1/4 size of this reducer means that it is designed to connect a 1.1/2" pipe to a 1.1/4" pipe. This can be useful in situations where two different sizes of pipes need to be connected, such as when installing a new plumbing system or making repairs to an existing system.
The McAlpine MultiFit Reducer 1.1/2 X 1.1/4 ST28M is made from high-quality materials, which ensures its durability and resistance to wear and tear. It is part of McAlpine's MultiFit range of fittings, which are designed to be compatible with plastic pipes.
Overall, the McAlpine MultiFit Reducer 1.1/2 X 1.1/4 ST28M is a reliable and efficient plumbing fitting that provides a secure and leak-free connection between two different sizes of plastic pipes. Its high-quality materials and push-fit design make it a popular choice for a wide range of plumbing applications.
_ Available in 1.25", 1.5", and 2" sizes
_ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
_ Manufactured in Polypropylene
The McAlpine MultiFit Straight Connector 1.1/4" S28M-BL is a plumbing fitting used to connect two pipes together. Specifically, it is designed to connect two pipes with a 1.1/4" diameter using a compression fitting. The "Multifit" designation indicates that the fitting can be used with either male or female pipe ends.
The S28M-BL part of the name likely refers to the specific model or part number of the connector. McAlpine is a UK-based company that produces a wide range of plumbing products, including waste pipes, traps, and connectors like the MultiFit Straight Connector. Colour: Black
_ Available in 1.25", 1.5", and 2" sizes
_ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe
The McAlpine M/Fit 90 Deg Bend 1.1/4" Ms4-BL is a plumbing fitting used for redirecting the flow of water or waste through a plumbing system. The bend is made of durable and lightweight material, making it easy to handle and install. The fitting is designed with a multifit connection, which means it can fit a range of different pipe sizes and types, including copper, plastic, and lead pipes. The 90-degree bend allows for a smooth change in direction of the plumbing system, reducing the risk of blockages or leaks. This McAlpine M/Fit 90 Deg Bend 1.1/4" Ms4-BL is a high-quality plumbing fitting designed for use in a variety of domestic and commercial plumbing applications.
_ Available in 1.25", 1.5", and 2" sizes
_ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020, copper pipe and lead pipe
Introducing the McAlpine 1.5" Stainless Steel Flange Shower Waste with 60mm x 70mm Tail CSWU3P – Superior Quality and Functionality for Your Shower Drainage!
Upgrade your shower with the McAlpine CSWU3P, a top-of-the-line 1.5" Stainless Steel Flange Shower Waste featuring a 60mm x 70mm Tail. Meticulously crafted for both durability and optimal drainage performance, this shower waste ensures efficient water flow while adding a touch of quality to your bathroom.
Key Features:
Stainless Steel Flange: The CSWU3P boasts a stainless steel flange, providing a durable and corrosion-resistant solution for your shower drainage. This premium material not only ensures longevity but also adds a touch of sophistication to your bathroom decor.
1.5" Size: With a 1.5" size, this shower waste offers ample capacity for efficient water drainage. The carefully chosen size facilitates quick and effective drainage, preventing water buildup and maintaining a clean and hygienic shower space.
60mm x 70mm Tail: The CSWU3P features a 60mm x 70mm tail, providing a versatile and adaptable solution for different shower setups. This tail size ensures compatibility with various plumbing configurations, making it suitable for both new installations and replacements.
Efficient Drainage Performance: The design of the CSWU3P prioritizes efficient water flow, preventing clogs and facilitating swift drainage. This feature ensures that your shower waste functions optimally, reducing the risk of standing water and potential issues.
Durable Construction: Crafted from high-quality stainless steel, the CSWU3P guarantees durability and longevity. The robust construction resists corrosion, providing a reliable solution that stands up to the rigors of daily shower use.
Effortless Installation: Designed for user-friendly installation, the McAlpine CSWU3P simplifies the process, saving you time and effort. Whether you're a professional installer or a DIY enthusiast, the straightforward assembly ensures a hassle-free shower waste installation.
Upgrade your shower with the McAlpine 1.5" Stainless Steel Flange Shower Waste with 60mm x 70mm Tail CSWU3P – where quality meets functionality. Trust McAlpine to deliver top-notch solutions that not only enhance the efficiency of your shower but also provide a durable and stylish component for years to come. Elevate your shower experience with the CSWU3P, setting a new standard in shower waste excellence.
1.5” Shower Waste: 60mm Stainless Steel Flange x 70mm Tail: Backnut Model
1.5” BSP
60mm Stainless Steel flange
White Plastic Backnut
70mm Tail
The polished stainless steel flange eliminates the problem of chrome plating deterioration
Manufactured in Polypropylene
Introducing the McAlpine 1.25" Combined Waste & Overflow for Vanity Basin with Nut & Bolt Connection FVW1P – Seamless Functionality and Durability for Your Vanity Basin!
Upgrade your vanity basin with the McAlpine FVW1P, an innovative 1.25" Combined Waste & Overflow featuring a reliable Nut & Bolt Connection. Meticulously crafted for both efficiency and durability, this combined waste and overflow system ensures optimal water drainage and overflow prevention, setting a new standard for functionality in your bathroom.
Key Features:
Combined Waste & Overflow: The FVW1P ingeniously combines waste and overflow functions into a single, efficient unit. This integrated design streamlines your vanity basin plumbing, ensuring both reliable water drainage and overflow prevention with a single, cohesive solution.
1.25" Size: With a 1.25" size, this combined waste and overflow system provides ample capacity for efficient water flow in your vanity basin. The carefully chosen size facilitates quick drainage, preventing water buildup and maintaining a clean and hygienic basin space.
Nut & Bolt Connection: The Nut & Bolt Connection ensures a secure and durable attachment, guaranteeing stability and reliability for your vanity basin. This robust connection method adds an extra layer of durability, providing peace of mind and long-lasting performance.
Durable Construction: Crafted from high-quality materials, the FVW1P guarantees durability and longevity. The robust construction is resistant to corrosion and wear, providing a dependable solution that withstands the demands of daily use in your bathroom.
Effortless Installation: Designed for user-friendly installation, the McAlpine FVW1P simplifies the process, saving you time and effort. Whether you're a professional plumber or a DIY enthusiast, the straightforward assembly with the Nut & Bolt Connection ensures a hassle-free experience.
Upgrade your vanity basin with the McAlpine 1.25" Combined Waste & Overflow with Nut & Bolt Connection FVW1P – where seamless functionality meets durability. Trust McAlpine to deliver top-notch solutions that not only enhance the efficiency of your basin but also provide a durable and reliable component for years to come. Elevate your bathroom experience with the FVW1P, setting a new standard in combined waste and overflow excellence.
1.25” Combined Waste and Overflow for Vanity Basin: 60mm Stainless Steel Flange: Compression Connection to Flexible Tube: Chrome Plated Overflow Grid: Plug and Chrome Plated Chain
1.25” BSP
Chrome Plated Plastic overflow grid
Black PVC plug and CP chain
Nut and bolt overflow connection and compression connection for flexible tube
60mm Stainless Steel flange
Flexible overflow tube has OD of 25mm
For use with vanity basins
Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
The polished stainless steel flange eliminates the problem of chrome plating deterioration
Manufactured in Polypropylene
Introducing the McAlpine 10" Chrome Plated Chain with 2 Triangles, Stay, and Nut CH10 – Timeless Style and Durability for Your Basin!
Upgrade the look of your basin with the McAlpine CH10, a classic 10" Chrome Plated Chain accompanied by 2 Triangles, Stay, and Nut. Meticulously designed for both functionality and aesthetics, this basin accessory not only adds a touch of timeless style to your bathroom but also ensures durability with its high-quality construction.
Key Features:
Chrome Plated Elegance: The CH10 boasts a chrome-plated finish, adding a touch of timeless elegance to your basin. The polished exterior not only enhances the aesthetics of your bathroom but also ensures durability, resisting corrosion and maintaining its luster over time.
10" Chain Length: The 10" chain provides a classic and versatile length for your basin plug or stopper. This length allows for easy and secure operation, ensuring your basin functions smoothly while adding a stylish detail to the overall design.
Two Triangles, Stay, and Nut: The inclusion of two triangles, a stay, and a nut complements the chain, creating a complete and functional set. These components contribute to the secure and reliable operation of your basin plug or stopper, ensuring long-lasting performance.
Durable Construction: Crafted from high-quality materials, the McAlpine CH10 guarantees durability and longevity. The robust construction of the chain, triangles, stay, and nut ensures a reliable solution that stands up to the rigors of daily basin use.
Effortless Installation: Designed for user-friendly installation, the McAlpine CH10 simplifies the process, saving you time and effort. Whether you're a professional plumber or a DIY enthusiast, the straightforward assembly ensures a hassle-free experience.
Upgrade your basin with the McAlpine 10" Chrome Plated Chain with 2 Triangles, Stay, and Nut CH10 – where timeless style meets durability. Trust McAlpine to deliver top-notch solutions that not only enhance the functionality of your basin but also provide a durable and stylish accessory for years to come. Elevate your basin experience with the CH10, setting a new standard in basin accessory excellence.
CP Chain and 2 Triangles, Stay and Nut
10_ Chrome Plated Chain and 2 Triangles, Stay and Nut
Introducing the McAlpine Stainless Steel Dome Plastic Basin Waste with Chrome Plated 1.25" Spring Loaded Mushroom CWP60-SSP – Unparalleled Elegance and Functionality for Your Basin!
Elevate your basin experience with the McAlpine CWP60-SSP, a sophisticated Stainless Steel Dome Plastic Basin Waste featuring a Chrome Plated 1.25" Spring Loaded Mushroom. Meticulously crafted for both style and efficiency, this basin waste not only adds a touch of luxury to your bathroom but also ensures reliable water drainage with a secure and spring-loaded mechanism.
Key Features:
Chrome Plated Elegance: The CWP60-SSP stands out with a chrome-plated finish, adding a touch of sophistication to your basin. The polished exterior not only enhances the aesthetics of your bathroom but also ensures durability, resisting corrosion and maintaining its luster over time.
Spring Loaded Mushroom Design: Featuring a 1.25" spring-loaded mushroom design, this basin waste provides secure and reliable water drainage. The spring-loaded mechanism ensures efficient operation, allowing you to control the basin waste effortlessly for a seamless user experience.
Stainless Steel Dome: The stainless steel dome adds a layer of durability and robustness to the basin waste. Crafted from high-quality materials, the dome ensures longevity and resilience, making it a reliable component for your daily basin use.
Optimal 1.25" Size: With a 1.25" size, the CWP60-SSP offers optimal water drainage for your basin. The carefully chosen size facilitates efficient water flow, preventing any potential water buildup and maintaining a clean and hygienic basin space.
Effortless Installation: Designed for user-friendly installation, the McAlpine CWP60-SSP simplifies the process, saving you time and effort. Whether you're a professional plumber or a DIY enthusiast, the straightforward assembly ensures a hassle-free experience.
Upgrade your basin with the McAlpine Stainless Steel Dome Plastic Basin Waste with Chrome Plated 1.25" Spring Loaded Mushroom CWP60-SSP – where elegance meets efficiency. Trust McAlpine to deliver top-notch solutions that not only enhance the functionality of your basin but also provide a durable and stylish component for years to come. Elevate your basin experience with the CWP60-SSP, setting a new standard in basin waste excellence.
1.25” x 60mm polished stainless steel flange with spring loaded mushroom plug
Available with Chrome Plated Brass, Matt Black Brass, or White Plastic Body
Suitable for basins with or without overflow
1.25” BSP thread
Polished Stainless Steel or Matt Black Mushroom Plug
Centre pin dry fixing connection for a quick and simple installation.
Supplied with plastic spacer for use with unslotted basins
Introducing the McAlpine Bath Clicker Waste with 58mm Tail CBW70-CLK – Effortless Elegance and Efficient Water Drainage for Your Bath!
Upgrade your bath experience with the McAlpine CBW70-CLK, a sophisticated Bath Clicker Waste featuring a 58mm Tail. Designed for seamless operation and lasting durability, this bath waste not only adds a touch of elegance to your bathroom but also ensures efficient water drainage with a simple click.
Key Features:
Clicker Waste Convenience: The CBW70-CLK boasts a user-friendly clicker waste design, providing effortless control over your bath's drainage. A simple click mechanism allows you to open or close the waste with ease, streamlining your bath experience.
Optimal 58mm Tail Size: With a 58mm tail, this bath waste ensures optimal water drainage from your bath. The size is carefully crafted to facilitate efficient water flow, preventing any potential standing water issues and maintaining a clean and hygienic bathing space.
Sleek and Elegant Design: Elevate the aesthetics of your bathroom with the CBW70-CLK's sleek and elegant design. The polished finish and refined appearance add a touch of sophistication to your bath area, creating a visual focal point in your bathroom decor.
Durable Construction: Crafted from high-quality materials, this bath clicker waste guarantees durability and longevity. The robust construction ensures resistance to corrosion and wear, providing a reliable solution that stands up to the demands of daily bath use.
Effortless Installation: Designed for user-friendly installation, the McAlpine CBW70-CLK simplifies the process, saving you time and effort. Whether you're a professional plumber or a DIY enthusiast, the straightforward assembly ensures a hassle-free experience.
Upgrade your bath space with the McAlpine Bath Clicker Waste with 58mm Tail CBW70-CLK – where elegance meets efficiency. Trust McAlpine to deliver top-notch solutions that not only enhance the functionality of your bath but also provide a durable and stylish component for years to come. Elevate your bath experience with the CBW70-CLK, setting a new standard in bath waste excellence.
1.5” Chrome Plated Brass Bath Waste – Backnut Model: 70mm Flange with Spring-Loaded Mushroom Plug
Available in 2 Tail lengths
1.5” BSP
Spring loaded mushroom plug
Chrome Plated Brass Backnut
70mm flange
Manufactured in Chrome Plated Brass
Introducing the McAlpine 2" BSP Compression Nut Z8B – Unmatched Quality and Precision for Reliable Plumbing Connections!
Enhance your plumbing projects with the McAlpine Z8B, a high-performance 2" BSP Compression Nut designed to provide unparalleled reliability and ease of installation. Meticulously crafted with precision engineering, this compression nut ensures a secure and leak-free connection for your plumbing systems.
Key Features:
Generous Size: With a 2" BSP size, the Z8B offers a generous diameter to accommodate a variety of plumbing applications. Whether you're working on commercial installations or residential projects, this compression nut provides the ideal fit for your needs.
Compression Technology: The Z8B is equipped with advanced compression technology, ensuring a tight and secure connection. This innovative feature minimizes the risk of leaks, providing peace of mind and reliability for your plumbing installations.
Durable Construction: Crafted from high-quality materials, this compression nut guarantees durability and longevity. The robust construction ensures resistance to corrosion and wear, making it a dependable component that withstands the challenges of everyday use.
Versatile Application: The Z8B's compatibility with 2" BSP ensures versatility in various plumbing setups. From connecting pipes to securing fittings, this compression nut adapts effortlessly, making it an essential tool for professional plumbers and DIY enthusiasts alike.
Easy Installation: Designed with user convenience in mind, the McAlpine Z8B simplifies the installation process. Whether you're an experienced plumber or tackling a DIY project, the straightforward assembly ensures a hassle-free experience, saving you time and effort.
Upgrade your plumbing connections with the McAlpine 2" BSP Compression Nut Z8B – where quality meets precision. Trust McAlpine to deliver top-notch solutions that not only ensure leak-free connections but also provide a durable and reliable component for all your plumbing needs. Elevate your plumbing game with the Z8B, setting a new standard in compression nut excellence.
BSP Compression Nut
Available in 1.25”, 1.5”, and 2_ sizes
Manufactured in Polypropylene
Introducing the McAlpine 80mm Water Seal Resealing Shower Trap with Multifit Outlet STW12-R – Unrivaled Innovation for a Leak-Free and Hygienic Shower Experience!
80mm Water Seal Resealing Shower Trap with Multifit Outlet
Available in White or Chrome Plated Plastic, or Chrome Plated Brass
Suitable for shower trays with a 50mm waste hole
80mm Water Seal
1.5” Outlet
Waste grid and dip tube removable to facilitate easy cleaning
Flow rate 56 l/min when tested under a constant 120mm head of water in accordance with clause 5 of BS EN 274-2:2002
Overall Height 154mm your shower with the McAlpine STW12-R, a cutting-edge Water Seal Resealing Shower Trap designed to set a new standard in reliability and hygiene. Meticulously crafted with precision engineering, this shower trap not only ensures a leak-free environment but also prioritizes your well-being with its innovative design.
Key Features:
Resealing Technology: Experience unmatched hygiene and odor control with the STW12-R's advanced resealing technology. This innovative feature prevents foul odors and sewer gases from entering your bathroom, ensuring a fresh and pleasant shower environment every time.
80mm Water Seal: The STW12-R boasts an impressive 80mm water seal, providing an extra layer of protection against potential leaks and odors. This robust water seal, combined with the resealing technology, guarantees a secure and sanitary shower experience for you and your family.
Multifit Outlet Versatility: With a Multifit Outlet, the STW12-R adapts to various plumbing configurations effortlessly. This versatile feature ensures compatibility with different pipe types, making it an ideal choice for both new installations and replacements.
Durable Construction: Crafted from high-quality materials, this shower trap ensures durability and long-lasting performance. The robust construction resists corrosion, providing a reliable solution that stands up to the rigors of daily shower use.
Easy Installation: Designed for user-friendly installation, the McAlpine STW12-R streamlines the process, saving you time and effort. Whether you're a professional installer or a DIY enthusiast, the straightforward assembly ensures a hassle-free shower trap installation.
Upgrade your shower experience with the McAlpine 80mm Water Seal Resealing Shower Trap – where innovation meets reliability and hygiene. Trust McAlpine to deliver cutting-edge solutions that not only prevent leaks but also prioritize your well-being. Elevate your shower space with the STW12-R, setting a new standard in shower trap excellence.
Introducing the McAlpine 1000mm Channel Drain with Polished Cover Plate CD1000-P – Unleash Elegance and Functionality in Drainage Solutions!
Revolutionize your outdoor drainage with the McAlpine CD1000-P, a state-of-the-art 1000mm Channel Drain designed to blend superior functionality with an aesthetic appeal that elevates your surroundings. Crafted with meticulous attention to detail, this channel drain is the epitome of innovation and style in drainage technology.
Key Features:
Impressive Length: The CD1000-P boasts a generous 1000mm length, providing extensive coverage for efficient water drainage in various spaces. Polished Cover Plate Elegance: Elevate the visual aesthetics of your environment with the polished cover plate of the CD1000-P. The sleek and modern design not only adds a touch of sophistication but also complements the surrounding architecture, making it a standout feature.
Durable Construction: Crafted from high-quality materials, this channel drain guarantees durability and longevity. The robust construction ensures resistance to corrosion and wear, making it a reliable solution that stands up to the challenges of exposure.
Efficient Water Flow: The CD1000-P is engineered with an efficient drainage system to swiftly manage water runoff. Its design prevents pooling, erosion, and potential water damage, providing a solution that not only looks good but performs impeccably.
Easy Installation: Designed with user convenience in mind, the McAlpine CD1000-P ensures a hassle-free installation process. The straightforward assembly saves time and effort, making it an ideal choice for both professional installers and DIY enthusiasts.
Transform your spaces with the McAlpine 1000mm Channel Drain – where form meets function seamlessly. Trust McAlpine to deliver drainage solutions that not only efficiently manage water but also enhance the overall aesthetics of your surroundings. Upgrade to elegance and functionality with McAlpine's CD1000-P, setting a new standard in drainage excellence.
1000mm Channel Drain – Polished.
Available in 6 cover plate lengths from 548mm to 1148mm
Choice of 3 finishes – simple brushed, polished metallic finish or a grid with a brushed finish
Highest quality grade 304 Stainless Steel cover plate
Cover plate reversible to accommodate tiles up to 8mm
Frame height adjustable to suit tiles up to 16mm
Supplied with 50mm water seal trap and adjustable height support legs
Flow Rate 54 litres per minute, calculated under a constant 120mm head of water
Introducing the McAlpine Tubular Swivel Basin Trap - A Smart Solution for Efficient and Stylish Plumbing!
Upgrade your bathroom with the McAlpine Tubular Swivel Basin Trap, a sleek and functional plumbing accessory designed to elevate both form and function. This innovative trap is meticulously crafted to combine modern design with reliable performance, making it an ideal choice for your basin or sink installation.
Key Features:
Swivel Design: The Tubular Swivel Basin Trap features a unique swivel design, allowing for easy adjustment and flexibility during installation. Achieve the perfect alignment with your basin or sink, ensuring a seamless and professional look for your bathroom.
Pipe Connection Compatibility: Designed to accommodate 19/23mm pipes, this basin trap provides versatile connectivity options for various plumbing setups. Its adaptable nature makes it suitable for a range of basin configurations, offering convenience and ease of installation.
Durable Construction: Crafted with durability in mind, the McAlpine Tubular Swivel Basin Trap is made from high-quality materials that resist corrosion and wear. The robust construction ensures longevity, providing you with a reliable solution that withstands the demands of daily use.
Efficient Trapping Mechanism: Say goodbye to unpleasant odors and blockages with the efficient trapping mechanism of this basin trap. It effectively captures debris and prevents sewer gases from entering your living space, maintaining a clean and hygienic environment.
Modern Aesthetics: Beyond its functional benefits, this basin trap adds a touch of modern elegance to your bathroom. The sleek design and polished finish enhance the visual appeal of your plumbing setup, contributing to an overall sophisticated and contemporary look.
Upgrade your bathroom with the McAlpine Tubular Swivel Basin Trap and enjoy the perfect blend of functionality and aesthetics. Invest in a plumbing accessory that not only ensures efficient water flow but also complements your bathroom decor with its stylish design. Make a statement in your space while prioritizing performance with McAlpine.
Tubular Swivel Basin Trap with 19/23mm Pipe Connection
75mm Water Seal Multifit Outlet Tubular Swivel Basin Trap with 19/23mm Pipe Connection
Available in 1.25” and 1.5” sizes
75mm Water Seal
Multifit Compression Outlet suits all plastic, copper and lead pipes
Adjustable Inlet makes trap suitable for all domestic repair, maintenance and improvement work
Connection for 19/23mm pipe to receive the discharge from condensing boiler
Supplied with Blanking Cap
Available as Anti-Syphon (Silentrap). Add suffix “V” to product code.
Manufactured in polypropylene
Conforms to EN 274-1:2002, BS 6798:2014 and Building Regulations Approved Document H
The John guest 3/8Ó OD x 3/8Ó NPT push-to-connect to male valve is manufactured from white polypropylene and equipped with epdm o-rings utilizing John guestÕs push-fit technology to make easy, reliable, leak-free connections. They have been developed to satisfy the compatibility needs for a wide range of applications and can be used on plastic or soft copper tubing. To make a connection, the tube is simply pushed in by hand; the unique John guest collet locking system holds the tubing firmly in place. Disconnection is just as easy and requires no special tools.About this item
John guest push-to-connect technology provides a simple, reliable, leak-free connection
Manufactured from white polypropylene and equipped with EPDM o-rings
Can be used with plastic or soft Copper tubing
Manufactured with FDA compliant materials and NSF 61 and 51 certified
Lead-free, corrosion free, non-toxic, and more chemically resistant than other plastics
Pack of 5
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit reducer push-fit fitting for the connection of plastic or copper pipe. The reduced spigot end allows for two Speedfit push-fit fittings to be joined, creating a swivel type connection while reducing the line size. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.The JG Speedfit reducer push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
John Guest push-fit acetal service valve metric is used to temporarily shut off hot or cold water supply to a drinks dispense fixture or fitting. The ball valve is easily operated with a _ turn screwdriver slot and is also suitable for hot and cold water applications.Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. All John Guest fittings are manufactured and assembled in the UK. Durable acetal copolymer material with nitrile O-rings Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for hot and cold water Compatible with LLDPE or soft metal pipe/tubing
JG Speedfit cold water service reducing straight connector for the connection of two unequal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service reducing straight connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit cold water service reducing straight connector for the connection of two unequal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. The JG Speedfit cold water service reducing straight connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
John Guest tube cutter is designed for accurately cutting LLDPE tubing up to 22mm. Simply mark where the pipe needs to be cut and then use the handy clamp action to cut a square edge, prefect for pipe insertion into a John Guest fitting. Suitable for sizes up to 22mm
John Guest tube cutter is designed for accurately cutting LLDPE tubing up to 22mm. Simply mark where the pipe needs to be cut and then use the handy clamp action to cut a square edge, prefect for pipe insertion into a John Guest fitting. Suitable for sizes up to 22mm
Always use a JG Speedfit pipe insert when connecting Speedfit pipe to a Speedfit push-fit fitting or when connecting to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK. Enhances sealing for a securer connection Maintains structural integrity of the pipe connection Helps make the pipe more rigid when a side load is applied Suitable for hot and cold water and central heating systems
JG Speedfit cold water service stop end that quickly and easily caps off MDPE pipework at termination points on a temporary or permanent basis. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the JG Speedfit cold water service stop end fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
JG Speedfit cold water service stop end that quickly and easily caps off MDPE pipework at termination points on a temporary or permanent basis. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the JG Speedfit cold water service stop end fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Stainless steel teeth grab ring provides extra grip on the pipe Durable material with high impact resistance Non-toxic and no scale build-up Resists corrosion and biological growth Compatible with MDPE pipes only (inserts required) Suitable for cold water use only
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. SpeedfitÕs extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. ¥ Suitable for hot and cold water services, central heating systems and combi systems ¥ BS EN 7291 parts 1, 2, 3 and S, WRAS approved ¥ Secure and easy demounting without the need for a tool ¥ 50 year guarantee ¥ Minimum operating temperature - 20 ¡C ¥ Maximum operating temperature - 105 ¡C ¥ Maximum operating pressure at minimum temperature - 12 BAR ¥ Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM222222W Warranty (years) 50 Angle (¡) 90 Diameter (mm) 22 Pack Size 1 Fitting Type Elbow Equal or Reducing Equal
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. SpeedfitÕs extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. ¥ Suitable for hot and cold water services, central heating systems and combi systems ¥ BS EN 7291 parts 1, 2, 3 and S, WRAS approved ¥ Secure and easy demounting without the need for a tool ¥ 50 year guarantee ¥ Minimum operating temperature - 20 ¡C ¥ Maximum operating temperature - 105 ¡C ¥ Maximum operating pressure at minimum temperature - 12 BAR ¥ Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM222222W Warranty (years) 50 Angle (¡) 90 Diameter (mm) 22 Pack Size 1 Fitting Type Elbow Equal or Reducing Equal
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. SpeedfitÕs extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. ¥ Suitable for hot and cold water services, central heating systems and combi systems ¥ BS EN 7291 parts 1, 2, 3 and S, WRAS approved ¥ Secure and easy demounting without the need for a tool ¥ 50 year guarantee ¥ Minimum operating temperature - 20 ¡C ¥ Maximum operating temperature - 105 ¡C ¥ Maximum operating pressure at minimum temperature - 12 BAR ¥ Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM222222W Warranty (years) 50 Angle (¡) 90 Diameter (mm) 22 Pack Size 1 Fitting Type Elbow Equal or Reducing Equal
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90¡ bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit equal elbow push-fit fitting for the connection of equal sized plastic or copper pipe to form a 90¡ bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit equal elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit reducing elbow push-fit fitting for the connection of unequal sized plastic or copper pipe to form a 90¡ bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit reducing elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit and hand-tighten connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
