The Panasonic EYC954B32 Battery & Charger Kit contains the following: 2 x 18V 3.0Ah Li-ion Batteries. 1 x 14.4V-28.8V EY0L82B31 Universal Charger, suitable for charging all types of Panasonic 14.4V-28.8V Li-ion batteries. This 'Quick Charger' has a charging time of 15-90 minutes, depending on the specific battery voltage and capacity. An LED display allows you to monitor the operational status of the charger and the charge state of the battery.
The Panasonic EYC242 Twin Pack contains the following: 1 x 18V EY79A3 Smart Brushless Combi Drill drills holes easily with grip torque control, ensuring good progress, even under heavy load. The drill adjusts automatically between a fast rotation speed for lighter work and higher torque whenever the load increases. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed: 20-530/70-1,800/min.Torque Settings: 18Torque: Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Bit Holder: 1/2in Square Drive with Ball DetentNo Load Speed: 0-1,000/0-1,500/0-2,500/min.Impact Rate: 0-1,900/0-2,900/0-3,600/bpmMax. Torque: 280NmTensile Bolt Capacity: Standard M6-M16, High M6-M12 Also supplied with: 2 x 18V 3.0Ah Li-ion Batteries, 1 x EY0L82B31 Universal Li-ion Charger 14.4V-28.8V and 1 x T-Loc Carry Case.
The Panasonic EYC242LJ2G31 Twin Pack contains the following: 1 x 18V EY79A3 Smart Brushless Combi Drill drills holes easily with grip torque control, ensuring good progress, even under heavy load. The drill adjusts automatically between a fast rotation speed for lighter work and higher torque whenever the load increases. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed: 20-530/70-1,800/min.Torque Settings: 18Torque: Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Bit Holder: 1/2in Square Drive with Ball DetentNo Load Speed: 0-1,000/0-1,500/0-2,500/min.Impact Rate: 0-1,900/0-2,900/0-3,600/bpmMax. Torque: 280NmTensile Bolt Capacity: Standard M6-M16, High M6-M12 Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x EY0L82B31 Universal Li-ion Charger 14.4V-28.8V and 1 x T-Loc Carry Case.
The Panasonic EYC241PN2G3 Twin Pack contains the following: 1 x 18V EY79A3 Smart Brushless Combi Drill Driver. Automatically adjusts the speed of the drill to the torque being exerted, for optimum efficiency. Tough-Tool IP rated against dirt and dust ingress encountered on site. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed: 20-530/70-1,800/min.Torque Settings: 18Torque: Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm 1 x 18V EY76A1 Smart Brushless Impact Driver with DASH mode, this allows the unit to instantly reach full speed. It has an ultra-compact body design with increased impact protection as well as an ergonomic soft grip for user comfort. Fitted with a one-touch bit holder with a tapering collar design that makes accessory changing quick and simple. Chuck: 6.35mm (1/4in)No Load Speed: 0-950/0-1,450/0-2,800/min.Impact Rate: 0-1,800/0-2,500/0-3,100/min.Torque: 26/150/170NmCapacity: Tensile Bolt: Standard M6-M16, High M6-M12 Also supplied with: 2 x 18V 3.0Ah Li-ion Batteries, 1 x Charger and 1 x Systainer Case.
The Panasonic EYC232LJ Twin Pack contains the following: 1 x 18V EY74A3 Smart Brushless Drill Driver automatically adjusts between a fast rotation speed for lighter work and higher torque whenever the load increases. This enables appropriate torque and rotation for any task. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. Chuck: 13mm KeylessNo Load Speed: 20-530/70-1,800/min.Max. Torque: 50Nm, 18 Settings 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Also supplied with: 2 x 18V 3.0Ah Li-ion Batteries, 1 x Charger and 1 x Systainer Case.
The Panasonic EYC232LJ Twin Pack contains the following: 1 x 18V EY74A3 Smart Brushless Drill Driver automatically adjusts between a fast rotation speed for lighter work and higher torque whenever the load increases. This enables appropriate torque and rotation for any task. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. Chuck: 13mm KeylessNo Load Speed: 20-530/70-1,800/min.Max. Torque: 50Nm, 18 Settings 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x Charger and 1 x Systainer Case.
The Panasonic EYC231PN Twin Pack contains the following: 1 x 18V EY74A3 Smart Brushless Drill Driver automatically adjusts between a fast rotation speed for lighter work and higher torque whenever the load increases. This enables appropriate torque and rotation for any task. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. Chuck: 13mm KeylessNo Load Speed: 20-530/70-1,800/min.Max. Torque: 50Nm, 18 Settings 1 x 18V EY76A1 Smart Brushless Impact Driver with DASH mode, this allows the unit to instantly reach full speed. It has an ultra-compact body design with increased impact protection as well as an ergonomic soft grip for user comfort. Fitted with a one touch bit holder with a tapering collar design that makes accessory changing quick and simple. Chuck: 6.35mm (1/4in)No Load Speed: 0-950/0-1,450/0-2,800/min.Impact Rate: 0-1,800/0-2,500/0-3,100/min.Torque: 26/150/170NmCapacity: Tensile Bolt: Standard M6-M16, High M6-M12 Also supplied with: 2 x 18V Li-ion Batteries, 1 x Charger and 1 x Systainer Case.
The Panasonic EY Li-ion Battery Pack helps to protect your tool in heavy conditions. The improved design features materials that give reduced internal resistance, allowing a 250% lifespan when compared with an original Li-ion battery. Other features include: an over-discharge prevention sensor (OPS), battery overheat protection sensor, individual battery cell monitoring and heat-resistance layer (HRL) technology. Suitable for the Panasonic EY7881 and EY7880 SDS Rotary Hammers. Use with the EY0L82 or EY0L81 chargers.
The Panasonic EY79A3XT32 Smart Brushless Combi Drill Driver comes as a Bare Unit, No Battery or Charger. Supplied in a handy Systainer Case. The Systainer Case System is widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect the case with any of the other Systainer cased brands.
The Panasonic EY79A3PN2G31 Smart Brushless Combi Drill Driver is supplied with: 2 x 18V 3.0Ah Li-ion Batteries1 x Charger1 x Systainer Case, widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect the case with any of the other Systainer cased brands.
The Panasonic EY79A3LJ2G31 Smart Brushless Combi Drill Driver is supplied with: 2 x 18V 5.0Ah Li-ion Batteries1 x Charger1 x Systainer Case, widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect the case with any of the other Systainer cased brands.
The Panasonic EY75A8LJ2G Impact Wrench is supplied with: 2 x 18V 3.0Ah Li-ion Batteries1 x Charger1 x Systainer Case The Systainer Case System is widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
The Panasonic EY7552XT Impact Wrench comes as a Bare Unit, No Battery or Charger. It is supplied in a handy Systainer Case. The Systainer Case System is widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
The Panasonic EY74A3XT Smart Brushless Drill Driver comes as a Bare Unit, No Battery or Charger. It is supplied in a handy Systainer Case. The Systainer Case System is widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
The Panasonic EY74A3PN Smart Brushless Drill Driver comes with: 2 x 18V 3.0Ah Li-ion Batteries1 x Charger1 x Systainer Case, widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
The Panasonic EY47A1XT32 Folding Reciprocating Saw is supplied as a Bare Unit in a Systainer Case - No Battery or Charger. The Systainer Case System is widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
The Panasonic EY47A1LJ2G31 Folding Reciprocating Saw is supplied with: 1 x 100mm Metal Blade2 x 18V 5.0Ah Li-ion Batteries1 x Charger1 x Systainer Case The Systainer Case is widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
The Panasonic EY46A5XT Brushless Multi-Tool comes as a Bare Unit, No Battery or Charger. It is supplied in a handy Systainer Case. The Systainer Case System is widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
The Panasonic EY46A5PN Brushless Multi-Tool comes with: 1 x Universal 35mm Blade2 x 18V 3.0Ah Li-ion Batteries1 x Charger1 x Systainer Case, widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
The Panasonic EY46A5LJ Brushless Multi-Tool comes with: 1 x Universal 35mm Blade2 x 18V 5.0Ah Li-ion Batteries1 x Charger1 x Systainer Case, widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
The Panasonic EY46A2XT 125mm Grinder comes as a Bare Unit, No Battery or Charger. It is supplied in a handy Systainer Case. The Systainer Case System is widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
The Panasonic EY45A5XT Bandsaw comes as a Bare Unit, No Battery or Charger. It is supplied in a handy Systainer Case. The Systainer Case System is widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
The Panasonic EY45A5LJ2G Bandsaw is supplied with the following: 2 x 18V 5.0Ah Li-ion Batteries1 x Bandsaw Blade1 x Charger1 x Systainer Case The Systainer Case System is widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
The Panasonic EY45A1XT32 Reciprocating Saw comes as a Bare Unit, No Battery or Charger. It is supplied in a handy Systainer Case. The Systainer Case System is widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
The Panasonic EY4550XT Cordless Jigsaw comes as a Bare Unit, No Battery or Charger. It is supplied in a handy Systainer Case. The Systainer Case System is widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
The Panasonic EY4550LJ2G Cordless Jigsaw is supplied with: 1 x Systainer Case2 x 18V 5.0Ah Li-ion Batteries1 x Charger The Systainer Case System is widely used in the power tool industry by Festool, Mafell and other brands, so the tradesman can stack and connect our cases with any of the other Systainer cased brands.
