Rustins quick dry primer and undercoat can be used as a primer on new and bare wood, MDF, plaster, brickwork and cement. Used as an undercoat on primed or painted surfaces and may be overcoated with water or solvent based finishing paints. Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes it ideal to use on children's toys.Rustins Quick Dry Primer & Undercoat White.Size: 2.5 Litre.
Rustins Quick-Drying All Surface All Purpose (ASAP) Paint is a water based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. ASAP has a low odour and does not require any priming. It is suitable for use on wood, metal, plastic, galvanised steel, uPVC, lead, glass, tiles, plaster, mdf, masonry and melamine.This Rustins ASAP Paint has the following specifications: Colour: Grey.Size: 250ml.
PlastiKote Chalk Spray is a chalk-effect spray for decoration, furnishing, design, restoration or interior fittings. Can be used on virtually any surface, especially on wooden furniture. Creates an ultra-matt finish. It has a water-based formula that is environmentally friendly and is odour free. Suitable for interior and exterior use. The product can be sanded and washed back from 10 minutes after application to create a rustic look. PlastiKote gold and silver leaf paints can also be used underneath the chalk spray to create wonderful furniture effects. Coverage: Up to 1.4m² per 400ml1 x PlastiKote Chalk Finish Spray Vintage White 400ml
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Protects for up to 8 years.This Hammerite Direct to Rust Metal Paint has the following specifications: Finish: Smooth.Colour: Green.Size: 750ml.
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long-lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. The paint has a subtle hammered effect with a metallic sheen. Protects for up to 8 years.This Hammerite ;Direct to Rust Metal Paint ;has the following specification: Finish: Hammered.Colour: Black.Size: 250ml.
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Protects for up to 8 years.This Hammerite Direct to Rust Metal Paint has the following specifications: Finish: Smooth.Colour: Wild Thyme.Size: 750ml.
This Ronseal Ultimate Protection Decking Stain has the following specification: Colour: CharcoalSize: 2.5 litre Ronseal Ultimate Protection Decking Stain will keep your deck protected from the weather and everyday wear and tear. It looks great all year round, with added slip resistance. It lasts twice as long as a standard decking stain. Available in a range of colours.
The Rustins Quick Dry Small Job Paint has been designed specifically for small painting projects. A water-based, hard-wearing paint for interior and exterior use that is touch dry in approximately 30 minutes. Suitable for use on wood and metal. A 250ml tin will cover approximately 3.25m² Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes the paint ideal to use on children's toys and furniture.The Rustins Quick Dry Small Job Paint has the following specification: Finish: SatinColour: ChocolateSize: 250ml
Rustins Metal Lacquer is used to prevent discolouration caused by oxidisation and tarnishing. It leaves a colourless film that does not yellow or craze on ageing as cellulose lacquers do. Has excellent adhesion on chrome, brass, copper and silver. Size: 125ml
Blackfriar Quick Drying Acrylic Primer Undercoat is ideal for use inside and outside the home. It dries quickly, so you can apply a second coat after just 4 hours, enabling you to finish the whole job in one day. It is suitable for bare woodwork, hardboard, masonry, dry plaster and cement. Application method: Brush or spray. Coverage: 14m²/L/CoatTouch Dry: 1-2 hoursHard Dry: 3 daysRecoatable: 4 hoursBlackfriar Quick Drying Acrylic Primer Undercoat Colour: Grey.Size: 500ml.
The PlastiKote Metal Paint Hammer Spray Paint offers a decorative, hammered effect finish, which can be used on most surfaces to achieve a metal-like effect. Hammer is fast drying and protects against corrosion. It is quick and easy to use and is rust resistant. Suitable for: masonry, metal, plaster and wood. Drying time: 30 minutes. Coverage: Approximately 2.23m² per tin.PKT2215 Metal hammer paint has the following specifications: Colour: Black. Pack size: 400ml.
The PlastiKote Garden Colours Spray Paint has an eco-friendly water-based (90% less solvents) formula with fast drying technology. It can be used on wood, plastic, stone and brick. Ideal for small garden furniture, planters, gates and garden ornaments.1 x PlastiKote Garden Colours Spray Paint Lavender 400ml
PlastiKote Fast Dry Enamel Paint is a superior quality brush-on paint that comes in a handy 59ml bottle and is ideal for small project or craft uses. Fast Dry Enamel is a non-fading, long-lasting paint which is safe to use on children’s toys and furniture. Suitable for use on cardboard, ceramic, glass, metal, paper, plastic, wicker and wood.Colour: Silver Aluminium.
The PlastiKote Fast Dry Enamel Aerosol is a superior quality paint and comes in a handy 100ml spray that is ideal for small project or craft uses. Fast Dry Enamel is non-fading, long-lasting paint which is safe to use on children's toys and furniture. Suitable for use on cardboard, ceramic, glass, metal, paper, plastic and wood. Available in 37 superb colours, please note that the cap is not a true representation of the finish.Colour: Aluminium.
Rustins Quick Dry Step & Tile Paint is a high-performance interior and exterior gloss paint for tiles, concrete and bricks. It is quick drying, hard-wearing and weather-resistant. Not recommended for use on glazed or quarry tiles. To apply, use a good quality brush. 2 coats are usually sufficient. Sand lightly between coats if needed. Do not apply outdoors if rain is imminent, and do not use below 10°C. Drying time: Approx 4-8 hoursRecoat: 6-8 hoursCoverage: 14m²/LSpecifications:Colour: Black.Size: 1 Litre.
Rustins Quick Drying Black Paint gives a tough and durable finish, high quality water based paint. Produces a matt finish on wood and metal. Suitable for interior and exterior use with low VOC. Clean brushes in soap and water.Rustins Matt Paint Black Quick Drying. Size: 1 Litre.
Rustins Quick-Drying All Surface All Purpose (ASAP) Paint is a water based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. ASAP has a low odour and does not require any priming. It is suitable for use on wood, metal, plastic, galvanised steel, uPVC, lead, glass, tiles, plaster, mdf, masonry and melamine.This Rustins ASAP Paint has the following specification: Colour: White.Size: 500ml.
Rustins Quick-Drying All Surface All Purpose (ASAP) Paint is a water based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. ASAP has a low odour and does not require any priming. It is suitable for use on wood, metal, plastic, galvanised steel, uPVC, lead, glass, tiles, plaster, mdf, masonry and melamine.This Rustins ASAP Paint has the following specifications: Colour: Grey.Size: 500ml.
Rustins Quick-Drying All Surface All Purpose (ASAP) Paint is a water based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. ASAP has a low odour and does not require any priming. It is suitable for use on wood, metal, plastic, galvanised steel, uPVC, lead, glass, tiles, plaster, mdf, masonry and melamine.This Rustins ASAP Paint has the following specification: Colour: Black.Size: 500ml.
Blackfriar Anti-Rust Primer Quick Drying is an all-in-one primer and undercoat that is the perfect preparation for Blackfriar Metal Paint. It’s easy to apply and provides excellent protection against rust, making it ideal for factory maintenance, including plant and machinery, and for use at home on your car, bicycles, garden furniture, gates, railings and garage doors etc. Application method; brush or roller. Coverage: 14m²/L/Coat.Touch Dry: 2-4 hours.Hard Dry: 3 days.Recoatable: 16 hours.Blackfriar Anti-Rust Primer Quick Drying Size: 500ml.
Rustins Aluminium Wood Primer is an oil based primer, but contains aluminium pigment which provides better water-resistance. Applied directly to bare wood, it seals the surface and provides adhesion for subsequent coats of paint. Suitable for exterior use.Rustins Aluminium Wood Primer.Size: 500 ml.
Zinsser's B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains. The high adhesion shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. B-I-N® works brilliantly on water stains, mildew stains, nicotine, oil stains, marker pens stains and more. B-I-N® permanently blocks every kind of odour (from smoke and fire damage to odours from pets and nicotine). Its dried film is non-toxic and hypo-allergenic, and it may be used in areas where incidental contact with food items occur. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, conventional sprayer or roller. Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. Application information: Coverage: 12.5m² per litre.Touch dry: 15 minutes.Hard dry: 1 - 3 days.Recoatable: 45 minutes.Zinsser BIN500 is supplied in the following:Container type: Tin.Volume: 500ml.
Zinsser's B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains. The high adhesion shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. B-I-N® works brilliantly on water stains, mildew stains, nicotine, oil stains, marker pens stains and more. B-I-N® permanently blocks every kind of odour (from smoke and fire damage to odours from pets and nicotine). Its dried film is non-toxic and hypo-allergenic, and it may be used in areas where incidental contact with food items occur. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, conventional sprayer or roller. Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. Application information: Coverage: 12.5m² per litre.Touch dry: 15 minutes.Hard dry: 1 - 3 days.Recoatable: 45 minutes.Zinsser BIN1L is supplied in the following:Container type: Tin.Volume: 1 litre.
Zinsser's B-I-N® is the ultimate shellac-based primer, sealer and stain killer. It is perfect for use on interior surfaces and spot priming of exterior surfaces. B-I-N® offers unparalleled adhesion to glossy surfaces – including glass – without the need for scuff sanding and blocks stubborn and persistent stains. The high adhesion shellac formula seals porous surfaces with excellent enamel holdout, even sealing bleeding knots and sap streaks. B-I-N® works brilliantly on water stains, mildew stains, nicotine, oil stains, marker pens stains and more. B-I-N® permanently blocks every kind of odour (from smoke and fire damage to odours from pets and nicotine). Its dried film is non-toxic and hypo-allergenic, and it may be used in areas where incidental contact with food items occur. The primer is white in colour, but can also be tinted to mid-tone colours. It can be applied via an airless sprayer, brush, conventional sprayer or roller. Perfect for interior ceilings, walls, doors and related paintable surfaces and spot priming on exterior metal, trims, PVC and wood. Application information: Coverage: 12.5m² per litre.Touch dry: 15 minutes.Hard dry: 1 - 3 days.Recoatable: 45 minutes.Zinsser BIN400A is supplied in the following:Container type: Aerosol.Volume: 400ml.
