The Rustins Quick Dry Small Job Paint has been designed specifically for small painting projects. A water-based, hard-wearing paint for interior and exterior use that is touch dry in approximately 30 minutes. Suitable for use on wood and metal. A 250ml tin will cover approximately 3.25m² Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes the paint ideal to use on children's toys and furniture.The Rustins Quick Dry Small Job Paint has the following specification: Finish: SatinColour: Oxford BlueSize: 250ml
The Rustins Quick Dry Small Job Paint has been designed specifically for small painting projects. A water-based, hard-wearing paint for interior and exterior use that is touch dry in approximately 30 minutes. Suitable for use on wood and metal. A 250ml tin will cover approximately 3.25m² Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes the paint ideal to use on children's toys and furniture.The Rustins Quick Dry Small Job Paint has the following specification: Finish: SatinColour: PoppySize: 250ml
The Rustins Quick Dry Small Job Paint has been designed specifically for small painting projects. A water-based, hard-wearing paint for interior and exterior use that is touch dry in approximately 30 minutes. Suitable for use on wood and metal. A 250ml tin will cover approximately 3.25m² Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes the paint ideal to use on children's toys and furniture.The Rustins Quick Dry Small Job Paint has the following specification: Finish: SatinColour: WhiteSize: 250ml
Rustins Quick Dry Stain Block & Multi Surface Primer is a water based, Matt white stain blocker for interior and exterior use, with excellent adhesion to wood, plaster and previously painted surfaces. It will seal all stains that may bleed through and discolour paint. As a primer, it provides excellent adhesion to ceramic tiles, glass, and melamine. When dry, it can be painted with any type of paint and undercoat. It can be applied over asphalt, bitumen, crayon, creosote, graffiti, nicotine, rust, soot, tannin and water stains.Size: 1 Litre.
Rustins Quick Dry Stain Block & Multi Surface Primer is a water based, Matt white stain blocker for interior and exterior use, with excellent adhesion to wood, plaster and previously painted surfaces. It will seal all stains that may bleed through and discolour paint. As a primer, it provides excellent adhesion to ceramic tiles, glass, and melamine. When dry, it can be painted with any type of paint and undercoat. It can be applied over asphalt, bitumen, crayon, creosote, graffiti, nicotine, rust, soot, tannin and water stains.Size: 250ml.
Rustins Quick Dry Stain Block & Multi Surface Primer is a water based, Matt white stain blocker for interior and exterior use, with excellent adhesion to wood, plaster and previously painted surfaces. It will seal all stains that may bleed through and discolour paint. As a primer, it provides excellent adhesion to ceramic tiles, glass, and melamine. When dry, it can be painted with any type of paint and undercoat. It can be applied over asphalt, bitumen, crayon, creosote, graffiti, nicotine, rust, soot, tannin and water stains.Size: 500ml.
Rustins Quick Dry Step & Tile Paint is a high-performance interior and exterior gloss paint for tiles, concrete and bricks. It is quick drying, hard-wearing and weather-resistant. Not recommended for use on glazed or quarry tiles. To apply, use a good quality brush. 2 coats are usually sufficient. Sand lightly between coats if needed. Do not apply outdoors if rain is imminent, and do not use below 10°C. Drying time: Approx 4-8 hoursRecoat: 6-8 hoursCoverage: 14m²/LSpecifications:Colour: Black.Size: 1 Litre.
Rustins Quick Dry Step & Tile Paint is a high-performance interior and exterior gloss paint for tiles, concrete and bricks. It is quick drying, hard-wearing and weather-resistant. Not recommended for use on glazed or quarry tiles. To apply, use a good quality brush. 2 coats are usually sufficient. Sand lightly between coats if needed. Do not apply outdoors if rain is imminent, and do not use below 10°C. Drying time: Approx 4-8 hoursRecoat: 6-8 hoursCoverage: 14m²/LSpecifications:Colour: Black.Size: 250ml.
Rustins Quick Dry Step & Tile Paint is a high-performance interior and exterior gloss paint for tiles, concrete and bricks. It is quick drying, hard-wearing and weather-resistant. Not recommended for use on glazed or quarry tiles. To apply, use a good quality brush. 2 coats are usually sufficient. Sand lightly between coats if needed. Do not apply outdoors if rain is imminent, and do not use below 10°C. Drying time: Approx 4-8 hoursRecoat: 6-8 hoursCoverage: 14m²/LSpecifications:Colour: Black.Size: 500ml.
Rustins Quick Dry Step & Tile Paint is a high-performance interior and exterior gloss paint for tiles, concrete and bricks. It is quick drying, hard-wearing and weather-resistant. Not recommended for use on glazed or quarry tiles. To apply, use a good quality brush. 2 coats are usually sufficient. Sand lightly between coats if needed. Do not apply outdoors if rain is imminent, and do not use below 10°C. Drying time: Approx 4-8 hoursRecoat: 6-8 hoursCoverage: 14m²/LSpecifications:Colour: RedSize: 1 Litre
Rustins Quick Dry Step & Tile Paint is a high-performance interior and exterior gloss paint for tiles, concrete and bricks. It is quick drying, hard-wearing and weather-resistant. Not recommended for use on glazed or quarry tiles. To apply, use a good quality brush. 2 coats are usually sufficient. Sand lightly between coats if needed. Do not apply outdoors if rain is imminent, and do not use below 10°C. Drying time: Approx 4-8 hoursRecoat: 6-8 hoursCoverage: 14m²/LSpecification: Colour: RedSize: 2.5 Litre
Rustins Quick Dry Step & Tile Paint is a high-performance interior and exterior gloss paint for tiles, concrete and bricks. It is quick drying, hard-wearing and weather-resistant. Not recommended for use on glazed or quarry tiles. To apply, use a good quality brush. 2 coats are usually sufficient. Sand lightly between coats if needed. Do not apply outdoors if rain is imminent, and do not use below 10°C. Drying time: Approx 4-8 hoursRecoat: 6-8 hoursCoverage: 14m²/LSpecifications:Colour: Red.Size: 250ml.
Rustins Quick Dry Step & Tile Paint is a high-performance interior and exterior gloss paint for tiles, concrete and bricks. It is quick drying, hard-wearing and weather-resistant. Not recommended for use on glazed or quarry tiles. To apply, use a good quality brush. 2 coats are usually sufficient. Sand lightly between coats if needed. Do not apply outdoors if rain is imminent, and do not use below 10°C. Drying time: Approx 4-8 hoursRecoat: 6-8 hoursCoverage: 14m²/LSpecifications:Colour: Red.Size: 500ml.
Rustins Quick Dry White Satin Paint is a hard-wearing, water-based paint suitable for interior and exterior use. Use on bare wood, hardboard, MDF, plaster, brickwork and cement. Excellent covering power. Low odour. Brushes can be cleaned with water.Rustins Quick Dry White Satin Paint. Size: 250ml
Rustins Quick Dry White Satin Paint is a hard-wearing, water-based paint suitable for interior and exterior use. Use on bare wood, hardboard, MDF, plaster, brickwork and cement. Excellent covering power. Low odour. Brushes can be cleaned with water.Rustins Quick Dry White Satin Paint. Size: 500ml
Rustins Quick Drying MDF Primer is a grey, water-based primer for all interior and exterior surfaces. It has a high opacity with low odour. Suitable for use on hardboard and wood. Sizes available are 250ml and 500ml.1 x Rustins Quick Drying MDF Grey Primer 250ml
Rustins Quick Drying MDF Primer is a grey, water-based primer for all interior and exterior surfaces. It has a high opacity with low odour. Suitable for use on hardboard and wood. Sizes available are 250ml and 500ml.1 x Rustins Quick Drying MDF Grey Primer 500ml
Rustins Quick Dry MDF Sealer is a quick drying, clear sealer that allows the application of both paints or varnishes, unlike white MDF sealers which can only be painted. Touch dry in 30 minutes and can be re-coated in 2 hours. Clean brushes in water. Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes it ideal to use on children's toys.Rustins Quick Dry MDF Sealer Clear. Size: 1 Litre.
Rustins Quick Dry MDF Sealer is a quick drying, clear sealer that allows the application of both paints or varnishes, unlike white MDF sealers which can only be painted. Touch dry in 30 minutes and can be re-coated in 2 hours. Clean brushes in water. Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes it ideal to use on children's toys.Rustins Quick Dry MDF Sealer Clear. Size: 2.5 Litre.
Rustins Quick Dry MDF Sealer is a quick drying, clear sealer that allows the application of both paints or varnishes, unlike white MDF sealers which can only be painted. Touch dry in 30 minutes and can be re-coated in 2 hours. Clean brushes in water. Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes it ideal to use on children's toys.Rustins Quick Dry MDF Sealer Clear. Size: 250 ml.
Rustins Quick Dry MDF Sealer is a quick drying, clear sealer that allows the application of both paints or varnishes, unlike white MDF sealers which can only be painted. Touch dry in 30 minutes and can be re-coated in 2 hours. Clean brushes in water. Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes it ideal to use on children's toys.Rustins Quick Dry MDF Sealer Clear. Size: 500 ml.
Rustins new formula Metal Paint is a low VOC paint for use on both bare and galvanised metal. It can be applied directly without the use of a primer and is suitable for indoor and outdoor use. Containing anti-corrosion additives the paint has a low odour and dries to a smooth satin finish in just 2 hours. Brushes can be cleaned with water.This Rustins Quick Dry Metal Paint has a smooth satin finish. Colour: BlackSize: 1L
Rustins new formula Metal Paint is a low VOC paint for use on both bare and galvanised metal. It can be applied directly without the use of a primer and is suitable for indoor and outdoor use. Containing anti-corrosion additives the paint has a low odour and dries to a smooth satin finish in just 2 hours. Brushes can be cleaned with water.This Rustins Quick Dry Metal Paint has a smooth satin finish. Colour: WhiteSize: 250ml
Rustins Quick Drying Black Paint gives a tough and durable finish, high quality water based paint. Produces a matt finish on wood and metal. Suitable for interior and exterior use with low VOC. Clean brushes in soap and water.Rustins Satin Black Paint Quick Drying. Size: 1 Litre.
Rustins Quick Drying Black Paint gives a tough and durable finish, high quality water based paint. Produces a matt finish on wood and metal. Suitable for interior and exterior use with low VOC. Clean brushes in soap and water.Rustins Satin Black Paint Quick Drying. Size: 2.5 Litre.
Rustins Quick Drying Black Paint gives a tough and durable finish, high quality water based paint. Produces a matt finish on wood and metal. Suitable for interior and exterior use with low VOC. Clean brushes in soap and water.Rustins Satin Black Paint Quick Drying. Size: 250 ml.
Rustins Quick Drying Black Paint gives a tough and durable finish, high quality water based paint. Produces a matt finish on wood and metal. Suitable for interior and exterior use with low VOC. Clean brushes in soap and water.Rustins Satin Black Paint Quick Drying. Size: 500 ml.
Rustins Quick Dry Small Job Primer & Undercoat is for indoor and outdoor use. Used as a primer, it is suitable for new and bare wood, MDF, plaster, brickwork and cement. It has high opacity and can be used as an undercoat on primed or painted surfaces. This paint may be overcoated with water or solvent based paints. It also conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes it ideal to use on children's toys.Rustins Small Job Primer & Undercoat. Colour: GreySize: 250ml
Rustins Quick Dry Small Job Primer & Undercoat is for indoor and outdoor use. Used as a primer, it is suitable for new and bare wood, MDF, plaster, brickwork and cement. It has high opacity and can be used as an undercoat on primed or painted surfaces. This paint may be overcoated with water or solvent based paints. It also conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes it ideal to use on children's toys.Rustins Small Job Primer & Undercoat. Colour: WhiteSize: 250ml
Zinsser's Bulls Eye® 1-2-3 Plus is a universal water-based primer, sealer and stain killer. It is ideal for interior and exterior painting projects. Bulls Eye® 1-2-3 Plus delivers performance benefits normally only associated with solvent-based primers, including exceptional adhesion and stain blocking. It is specially formulated to resist re-wetting, meaning it can block water soluble stains like a solvent-based primer and seal oil-soluble stains, meaning painting projects can be completed with just one primer. Uniquely, it can be applied directly over water and smoke stains. Thanks to Hydro Pliolite® resin, Bulls Eye® 1-2-3 Plus delivers unparalleled adhesion and deals effortlessly with hard to paint interior and exterior substrates such as glossy surfaces, ceramic tiles, galvanised metal, vinyl, hardboard, melamine, varnish, plastic, GRP, UPVC, wood, masonry and more. Bulls Eye® 1-2-3 Plus is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state – and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 Plus is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of your paint job. All of the above benefits combine with ultra low VOC content, a lightning quick drying time of just 30 minutes and a 1 hour recoat time. Bulls Eye® 1-2-3 Plus is white in colour and can be applied via airless sprayer, brush, conventional spray, pad or roller. Application information:Coverage: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.Zinsser BE123P25L Bullseye 1-2-3 Plus is supplied in the following:Container type: Tin. Volume: 2.5 Litres.
Zinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job. Bulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money. Application information: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.The Zinsser BE1231L Bulls Eye 1-2-3 is supplied in the following: Container type: Tin. Volume: 1 Litre.
Zinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job. Bulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money. Application information: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.The Zinsser BE12325L Bulls Eye 1-2-3 is supplied in the following: Container type: Tin. Volume: 2.5 Litres.
Zinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job. Bulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money. Application information: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.The Zinsser BE123500 Bulls Eye 1-2-3 is supplied in the following: Container type: Tin. Volume: 500ml.
Zinsser ALLCOAT® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour. ALLCOAT® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, ALLCOAT® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more. ALLCOAT® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of ALLCOAT® Exterior will ensure that any exterior looks bright and beautiful for years. Zinsser ALLCOAT® Exterior gives excellent resistance against: Cracking, blistering and flaking.Rain and severe weather. Features:Long lasting finish.Easy to apply.Excellent colour retention.Multi-surface application. Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.This Zinsser ALLCOAT® Exterior has the following specification: Size: 1 LitreColour: Black Application Shake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.
Zinsser ALLCOAT® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour. ALLCOAT® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, ALLCOAT® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more. ALLCOAT® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of ALLCOAT® Exterior will ensure that any exterior looks bright and beautiful for years. Zinsser ALLCOAT® Exterior gives excellent resistance against: Cracking, blistering and flaking.Rain and severe weather. Features:Long lasting finish.Easy to apply.Excellent colour retention.Multi-surface application. Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.This Zinsser ALLCOAT® Exterior has the following specification: Size: 2.5 LitreColour: Black Application Shake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.
Zinsser ALLCOAT® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour. ALLCOAT® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, ALLCOAT® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more. ALLCOAT® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of ALLCOAT® Exterior will ensure that any exterior looks bright and beautiful for years. Zinsser ALLCOAT® Exterior gives excellent resistance against: Cracking, blistering and flaking.Rain and severe weather. Features:Long lasting finish.Easy to apply.Excellent colour retention.Multi-surface application. Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.This Zinsser ALLCOAT® Exterior has the following specification: Size: 1 LitreColour: White Application Shake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.
