Rustins Quick Drying MDF Primer is a grey, water-based primer for all interior and exterior surfaces. It has a high opacity with low odour. Suitable for use on hardboard and wood. Sizes available are 250ml and 500ml.1 x Rustins Quick Drying MDF Grey Primer 500ml
Rustins Gloss Paint is a water-based hard-wearing paint for interior and exterior use. It is suitable for use on wood and metal and conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3. Touch dry in approximately 30 minutes.This Rustins Quick Dry Gloss has the following specifications: Colour: BlackSize: 250ml
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Protects for up to 8 years.This Hammerite Direct to Rust Metal Paint has the following specifications: Finish: Smooth.Colour: ;Black.Size: 5 Litre.
The PlastiKote Industrial Metal Primer Sprays increase the life and durability of metal surfaces. They seal out moisture and inhibit rust formation. Metal Primers protect and seal all bare surfaces without the need for sanding. Quick drying. Drying time: touch dry in 20-40 minutes, thoroughly dry in 2 - 4 hours.Coverage: approximately 2.23m².PKT779 Industrial Primer has the following specifications:Colour: Red Oxide. Pack size: 500ml.
Blackfriar Wood Primer provides the perfect foundation to painted surfaces. Its special solvent based formulation makes easy work of new and stripped surfaces, enabling you to overcoat with ease. Perfect for the pre-decoration of soft and hard woods. For interior and exterior use. Application method: brush, roller and spray. Coverage: 14m²/L/CoatTouch Dry: 2-4 hoursHard Dry: 3 daysRecoatable: 16 hoursThe Blackfriar BKFWPW250 Wood Primer comes in the following:Colour: White.Size: 250ml.
PlastiKote Fluorescents ensure instant visibility and are ideal for identification and safety as well as decorative and craft projects. They can be used on both interior and exterior surfaces and on a wide range of materials. They are quick and easy to use and fast drying. Suitable for: concrete, fabric, glass, metal, plaster and wood. Drying time: touch dry in 15 - 20 minutes, thoroughly dry in 25 - 35 minutes. Coverage: approximately 2.23m² per tin.Colour: Fluorescent Green.Size: 400ml.
PlastiKote Trade Radiator Spray Paint is a fast-drying acrylic lacquer for decorating radiators and heating pipes. Trade functional sprays are ideal for every professional builder, tradesman or painter/decorator. Specification: Coverage: 1-1.75m²Touch Dry: 10 minutesThis PlastiKote Trade Radiator Spray Paint has the following specification: Finish/Colour: Satin White Size: 400mlCoverage: 1-1.75m²Touch Dry: 10 minutes
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Protects for up to 8 years.This Hammerite Direct to Rust Metal Paint has the following specifications: Finish: Smooth.Colour: Red.Size: 750ml.
The PlastiKote Twist & Spray Premium Satin Paint gives an enhanced, consistent coverage. The easy spray technology provides added control to make spray painting easier, faster and cleaner. Each coat is ultra-smooth, providing flawless coverage that dries quickly to a tough, durable finish. The paint can be recoated at anytime for simple, faster project completion. The can's large, comfortable finger pad requires 33% less finger pressure than other spray paint cans, and the twist and lock mechanism means there is no separate top to remove or replace after use. Its cap and button design shields the finger from paint for a cleaner spray painting process. Suitable for: wood, metal, plastic, stone, wicker and crafts. Drying Time: touch dry in 30-50 minutesCoverage: 2.23m² per canThis PlastiKote Twist & Spray has the following specifications: Finish: SatinColour: PistachioSize: 400ml
The PlastiKote Metal Protekt can be used on both interior and exterior surfaces and gives long-lasting protection against rust and corrosion. Available in different colour finishes, Metal Protekt is ideal for giving a splash of colour to wrought iron gates or garden furniture and many other decorative projects. It is quick and easy to use and fast drying. Drying time: touch dry in 10-20 minutes, thoroughly dry in 30-40 minutes. Coverage: approximately 2.23m² per tin.PKT1299 Metal Protekt has the following specifications:Colour: Aluminium. Pack size: 400ml.
PlastiKote Trade Metal Spray Paint & Primer is an advanced spray lacquer that combines primer and paint in one product. Suitable for metal surfaces. Trade functional sprays are ideal for every professional builder, tradesman or painter/decorator. Specification: Coverage: 1-1.75m²Touch Dry: 40-60 minutesThis PlastiKote Trade Metal Spray Paint & Primer has the following specification: Finish/Colour: Matt BlackSize: 400mlCoverage: 1-1.75m²Touch Dry: 40-60 minutes
PlastiKote Trade Cold Zinc Spray Primer has a zinc based formula, based on epoxy ester for treating galvanised and untreated steel. Offers excellent cathodic corrosion prevention. Great for covering spot welding and heat-resistant up to 350°C. Trade Functional Sprays are ideal for every professional builder, tradesman or painter/decorator. Specification: Coverage: 1-1.75m²Touch Dry: 20-30 minutes
Rustins Quick Dry Masonry Paint is a high quality, acrylic paint which is suitable for dry exterior masonry surfaces. To apply, use a large brush and apply evenly. The surface area must be clean, dry, free from dust and other contaminants likely to affect adhesion. No primer is required if fresh mortar has been applied to pointing. Do not use on damp surfaces. One coat is usually sufficient. Drying time: approx 30 mins, depending on temperature and humidity.Re-coat: 4 hours.Coverage: 14m² per 1 litre.Colour: Matt Cream.Size: 500ml.
Polycell Stain Stop is a highly pigmented paint, which permanently prevents existing stains reappearing through paint. It provides one coat coverage over water stains, grease, nicotine, crayons, rust and soot. Suitable for plaster, stone, masonry, plasterboard and wood. Drying time: Surface dry in 2-3 hours.Size: 1 litre.Container type: Tin.
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Supplied as an aerosol for easy application. Protects for up to 5 years.HMMSFGOAERO Direct to Rust Metal Paint has the following specifications:Finish: Smooth.Colour: Gold.Size: 400ml aerosol.
Blackfriar Wood Primer is an aluminium wood primer for hardwoods, which prevents bleed through fresh paintwork. Specifically formulated for painting new or old bare hard or resinous woods. For interior and exterior use. Application method; brush, roller and spray. Coverage: 14m²/L/CoatTouch Dry: 2-4 hoursHard Dry: 3 daysRecoatable: 16 hoursThe Blackfriar BKFWPA250 Aluminium Wood Primer comes in the following:Size: 250ml.
Rustins Quick Dry Small Job Primer & Undercoat is for indoor and outdoor use. Used as a primer, it is suitable for new and bare wood, MDF, plaster, brickwork and cement. It has high opacity and can be used as an undercoat on primed or painted surfaces. This paint may be overcoated with water or solvent based paints. It also conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes it ideal to use on children's toys.Rustins Small Job Primer & Undercoat. Colour: GreySize: 250ml
Rustins Quick Dry White Satin Paint is a hard-wearing, water-based paint suitable for interior and exterior use. Use on bare wood, hardboard, MDF, plaster, brickwork and cement. Excellent covering power. Low odour. Brushes can be cleaned with water.Rustins Quick Dry White Satin Paint. Size: 500ml
Rustins new formula Metal Paint is a low VOC paint for use on both bare and galvanised metal. It can be applied directly without the use of a primer and is suitable for indoor and outdoor use. Containing anti-corrosion additives the paint has a low odour and dries to a smooth satin finish in just 2 hours. Brushes can be cleaned with water.This Rustins Quick Dry Metal Paint has a smooth satin finish. Colour: BlackSize: 250ml
The PlastiKote Twist & Spray Premium Gloss Paint gives an enhanced, consistent coverage. The easy spray technology provides added control to make spray painting easier, faster and cleaner. Each coat is ultra-smooth, providing flawless coverage that dries quickly to a tough, durable finish. The paint can be recoated at anytime for simple, faster project completion. The can's large, comfortable finger pad requires 33% less finger pressure than other spray paint cans, and the twist and lock mechanism means there is no separate top to remove or replace after use. Its cap and button design shields the finger from paint for a cleaner spray painting process. Suitable for: wood, metal, plastic, stone, wicker and crafts. Drying Time: touch dry in 30-50 minutesCoverage: 2.23m² per canThis PlastiKote Twist & Spray has the following specifications: Finish: GlossColour: Smoke InfusionSize: 400ml
The PlastiKote Twist & Spray Premium Matt Paint gives an enhanced, consistent coverage. The easy spray technology provides added control to make spray painting easier, faster and cleaner. Each coat is ultra-smooth, providing flawless coverage that dries quickly to a tough, durable finish. The paint can be recoated at anytime for simple, faster project completion. The can's large, comfortable finger pad requires 33% less finger pressure than other spray paint cans, and the twist and lock mechanism means there is no separate top to remove or replace after use. Its cap and button design shields the finger from paint for a cleaner spray painting process. Suitable for: wood, metal, plastic, stone, wicker and crafts. Drying Time: touch dry in 30-50 minutesCoverage: 2.23m² per canThis PlastiKote Twist & Spray has the following specifications: Finish: MattColour: Antique WhiteSize: 400ml
The PlastiKote Trade Quick Dry Trim Spray Paint is a high-quality paint that is ideal for all window sills and wood trim. It is also the first ever trade quality trim paint in spray form. It has a next gen formulation, meaning the paint can be applied on almost all surfaces. Produces a long-lasting, durable, scratch resistant finish. Comes in 2 white finishes: high gloss and satinwood.This PlastiKote Trade Quick Dry Trim Spray Paint has the following specification: Finish/Colour: Satinwood WhiteSize: 400ml
The PlastiKote Trade Quick Dry Trim Spray Paint is a high-quality paint that is ideal for all window sills and wood trim. It is also the first ever trade quality trim paint in spray form. It has a next gen formulation, meaning the paint can be applied on almost all surfaces. Produces a long-lasting, durable, scratch resistant finish. Comes in 2 white finishes: high gloss and satinwood.This PlastiKote Trade Quick Dry Trim Spray Paint has the following specification: Finish/Colour: High Gloss WhiteSize: 400ml
