Rustins Quick-Drying All Surface All Purpose (ASAP) Paint is a water based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. ASAP has a low odour and does not require any priming. It is suitable for use on wood, metal, plastic, galvanised steel, uPVC, lead, glass, tiles, plaster, mdf, masonry and melamine.This Rustins ASAP Paint has the following specification: Colour: Red.Size: 250ml.
Rustins Quick-Drying All Surface All Purpose (ASAP) Paint is a water based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. ASAP has a low odour and does not require any priming. It is suitable for use on wood, metal, plastic, galvanised steel, uPVC, lead, glass, tiles, plaster, mdf, masonry and melamine.This Rustins ASAP Paint has the following specification: Colour: Cream.Size: 500ml.
Rustins Quick-Drying All Surface All Purpose (ASAP) Paint is a water based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. ASAP has a low odour and does not require any priming. It is suitable for use on wood, metal, plastic, galvanised steel, uPVC, lead, glass, tiles, plaster, mdf, masonry and melamine.This Rustins ASAP Paint has the following specifications: Colour: Grey.Size: 1 Litre.
Rustins Quick-Drying All Surface All Purpose (ASAP) Paint is a water based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. ASAP has a low odour and does not require any priming. It is suitable for use on wood, metal, plastic, galvanised steel, uPVC, lead, glass, tiles, plaster, mdf, masonry and melamine.This Rustins ASAP Paint has the following specification: Colour: Black.Size: 250ml.
Blackfriar Anti-Rust Primer Quick Drying is an all-in-one primer and undercoat that is the perfect preparation for Blackfriar Metal Paint. It’s easy to apply and provides excellent protection against rust, making it ideal for factory maintenance, including plant and machinery, and for use at home on your car, bicycles, garden furniture, gates, railings and garage doors etc. Application method; brush or roller. Coverage: 14m²/L/Coat.Touch Dry: 2-4 hours.Hard Dry: 3 days.Recoatable: 16 hours.The Blackfriar BKFARP250 Anti-Rust Primer Quick Drying comes in the following:Size: 250ml.
The Ronseal Anti Condensation Paint adds a layer of insulation to help prevent condensation which leads to mould. Once it’s dry that’s it, job done. Unless you want to add some colour. Then you can paint over it any colour your want. It’ll still give the same anti-condensation protection. BEFORE YOU START Make sure the room is above 10°c. Open your doors and windows for ventilation and put down dust sheets to protect anything you don't want to get paint on. Preparation: Remove any wallpaper and get rid of any loose paint or plaster by giving it a quick sand. Make sure the area you're painting is clean and dry. If you've got mould, get rid of it with our 3in1 Mould Killer. Cover any damp stains with our One Coat Damp Seal. USING YOUR ANTI-CONDENSATION PAINT Give it a really good stir. Then use a roller or brush to put it on. Don't brush or roller it out too thinly. After 4 hours put another generous coat on. It'll be touch dry in 1-2 hours. If you want to paint over it, let it dry for 4 hours. Usage Areas: All indoor walls and ceilings.Compatibility: Bare and previously painted walls and ceilings.Clean Up: Clean all brushes in warm, soapy water. Coverage: 6m² per Litre.Ronseal RSLACPWM750 Anti Condensation Paint Colour: White.Finish: Matt.Size: 750ml.
Rustins Aluminium Paint is an alkyd based oil paint which can be applied over existing paints and is ideal for use on wood and metal. Particularly good for protecting exterior steelwork. Made with leafing grade aluminium for extra water-resistance. Heat resistant up to 105°C. One coat is usually sufficient. A second coat may be applied if required. Touch dry in approximately 4 hours, depending on temperature and humidity and a second coat may be applied after 12-16 hours if required. 13m²/L/coat, depending on the absorbency of the surface. May be applied over solvent-based paint.Rustins Aluminium Paint. Size: 500ml
Zinsser ALLCOAT® Exterior is the best performance all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a Vapour permeable, low maintenance water-shedding coating, re-coatable in 1 hour. ALLCOAT® Exterior contains a biocide to protect the dried coating against fungal degradation. Designed for all exterior surfaces, ALLCOAT® Exterior is ideal for new or previously painted wood, UPVC, galvanising, metals, cladding, weathered bitumen, stucco, brick, stone, cured concrete and more. ALLCOAT® Exterior is self-priming and will bond to existing glossy paints without sanding. For most jobs, there is no need to purchase a separate primer. After removing existing mould and mildew, two coats of ALLCOAT® Exterior will ensure that any exterior looks bright and beautiful for years. Zinsser ALLCOAT® Exterior gives excellent resistance against: Cracking, blistering and flaking.Rain and severe weather. Features:Long lasting finish.Easy to apply.Excellent colour retention.Multi-surface application. Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre- 1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding. New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting.This Zinsser ALLCOAT® Exterior has the following specification: Size: 2.5 LitreColour: Black Application Shake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017in tip and high-medium (2000-2500 PSI) pressure. Apply when air and surface temperatures are between 10°-32°C and humidity is less than 85%. Avoid painting in direct sunlight and maintain a wet edge to avoid lapping.
Ronseal All Surface Primer & Undercoat Exterior prepares almost any surface in your home in just one coat. Helps paint to stick. Hides bold colours and dark marks. Ideal for use on wood, metal, kitchen and bathroom tiles, brick, stone, MDF, plastic, glass and more.
The Ronseal Anti Mould Paint protects walls and ceilings from mould growth for up to 6 Years. The paint's advanced encapsulated biocide technology is specifically designed to actively prevent all common types of mould (including black mould) from building up on the paint surface in areas of high condensation and humidity such as kitchens and bathrooms. Specification Areas of use: Interior walls. Coverage: 13m2 covered per litre.Number of coats: 2.Drying time: 2 hours.Ronseal RSLQDAMAWM 6 Year Anti Mould Paint comes in the following: Colour: White.Finish: Matt.Size: 400ml.Application: Aerosol. Our 6 year Anti-Mould Aerosol only takes 10 minutes to dry and gets into all those hard to reach places and once the last coat is dry, thats it! Your paint will stay mould free for up to 6 years.
Zinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job. Bulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money. Application information: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.The Zinsser BE1231L Bulls Eye 1-2-3 is supplied in the following: Container type: Tin. Volume: 1 Litre.
Zinsser's Bulls Eye® 1-2-3 is a universal interior and exterior, water-based, primer-sealer. It offers low odour application, quick drying convenience and excellent adhesion to glossy surfaces. Bulls Eye® 1-2-3 effectively primes and seals a wide variety of interior and exterior surfaces. A ‘bond coat’ primer that’s great for hard-to-stick surfaces, it offers excellent adhesion without sanding. Bulls Eye® 1-2-3 also prevents rust formation when applied over clean ferrous metal such as iron and steel. It is mould and mildew-resistant, making it ideal for high-humidity areas such as bathrooms and laundry rooms. It offers effective resistance to the formation of mould and mildew on the underside and surface of the primer film, prolonging the life of the paint job. Bulls Eye® 1-2-3 is great for blocking stains. It permanently and completely seals graffiti, grease spots, tar and asphalt – inside and out. It is rust inhibitive and ideal for new metal. It resists flash rusting in its 'wet' state and provides rust resistance for the life of the coating. It dries to a smooth, tight, water-resistant film that is perfect for painting iron railings, steel doors, metal panels, duct work, galvanised gutters – any interior or exterior metal surface. Bulls Eye® 1-2-3 is white in colour and can be applied via air sprayer, brush, conventional spray, pad or roller. It has a quick 35 minute drying time and 1 hour dry time and can be tinted towards the colour of your topcoat (mid-tone colours only) to eliminate the need for one coat of paint – saving both time and money. Application information: 10m² per Litre. Touch dry: 35 minutes. Hard dry: 7 days. Recoatable: 1 hour.The Zinsser BE12325L Bulls Eye 1-2-3 is supplied in the following: Container type: Tin. Volume: 2.5 Litres.
Hammerite Direct To Rust Metal Paint can be painted directly onto rusty surfaces and, thanks to its special 3 in 1 formula, there is no need to use a primer or undercoat - saving you precious time! Hammerite forms a superior barrier that not only seals out moisture, but also gives long lasting protection, both inside and outside. Touch dry in an hour, Hammerite is corrosion resistant and is suitable for use on a wide range of exterior metal including gates, railings, drainpipes, guttering and garden furniture. Protects for up to 8 years.This Hammerite Direct to Rust Metal Paint has the following specifications: Finish: Smooth.Colour: Silver.Size: 750ml.
This Ronseal Ultimate Protection Decking Paint has the following specification: Colour: CharcoalSize: 2.5 litre Ronseal Ultimate Protection Decking Paint rescues tired decks. It fills cracks, locks down splinters and covers grey wood, whilst providing long-lasting, all-weather protection. Available in a range of colours.
The PlastiKote Fast Dry Enamel Aerosol is a superior quality paint and comes in a handy 100ml spray that is ideal for small project or craft uses. Fast Dry Enamel is non-fading, long-lasting paint which is safe to use on children's toys and furniture. Suitable for use on cardboard, ceramic, glass, metal, paper, plastic and wood. Available in 37 superb colours, please note that the cap is not a true representation of the finish.Colour: Black.Finish. Matt.
Hammerite No.1 Rust Beater provides a high build finish to heavily pitted areas of rust and prevents new rust forming. Compatible with most topcoats, this Rust Beater kills rusts, primes and undercoats in one. It is corrosion resistant and suitbale for ferrous metals. Can be applied via brush or roller, and directly to rust. Touch dry in 2 hours.HMMNO1DB250 No.1 Rust Beater has the following specifications:Colour: Dark Brown.Size: 250ml.
Blackfriar Chalkboard Paint produces a chalkboard surface with a durable matt black finish. It resists ghosting allowing for clear, legible chalk writing. Ideal for creating new or renovating old chalkboards. Application method: brush and spray. Coverage: 14m²/L/CoatTouch Dry: 16 hoursHard Dry: 16 hoursRe-coatable: 16 hoursThe Blackfriars BKFBBP250 Chalkboard Paint comes in the following:Size: 250ml
PlastiKote metallic spray paint is ideal for small decorative and craft projects and is perfect for adding a special touch around the festive season. The paint creates a deep, rich metallic finish and is suitable for indoor and outdoor use. Suitable for: papier mache, stone, terracotta, wicker and wood. Drying time: Touch dry in 5-10 minutes, thoroughly dry in 25-35 minutes. Coverage: approximately 2.23m² per 400ml.This PlastiKote Metallic Spray Paint has the following specifications: Colour: Rose Gold.Pack Size: 400ml.
PlastiKote metallic spray paint is ideal for small decorative and craft projects and is perfect for adding a special touch around the festive season. The paint creates a deep, rich metallic finish and is suitable for indoor and outdoor use. Suitable for: papier mache, stone, terracotta, wicker and wood. Drying time: Touch dry in 5-10 minutes, thoroughly dry in 25-35 minutes. Coverage: approximately 2.23m² per 400ml.This PlastiKote Metallic Spray Paint has the following specifications: Colour: Graphite.Pack Size: 400ml.
PlastiKote Fast Dry Enamel Paint is a superior quality brush-on paint that comes in a handy 59ml bottle and is ideal for small project or craft uses. Fast Dry Enamel is a non-fading, long-lasting paint which is safe to use on children’s toys and furniture. Suitable for use on cardboard, ceramic, glass, metal, paper, plastic, wicker and wood.Colour: Hot Pink.
The PlastiKote Fast Dry Enamel Aerosol is a superior quality paint and comes in a handy 100ml spray that is ideal for small project or craft uses. Fast Dry Enamel is non-fading, long-lasting paint which is safe to use on children's toys and furniture. Suitable for use on cardboard, ceramic, glass, metal, paper, plastic and wood. Available in 37 superb colours, please note that the cap is not a true representation of the finish.Colour: Aubergine.
Rustins Quick Dry Step & Tile Paint is a high-performance interior and exterior gloss paint for tiles, concrete and bricks. It is quick drying, hard-wearing and weather-resistant. Not recommended for use on glazed or quarry tiles. To apply, use a good quality brush. 2 coats are usually sufficient. Sand lightly between coats if needed. Do not apply outdoors if rain is imminent, and do not use below 10°C. Drying time: Approx 4-8 hoursRecoat: 6-8 hoursCoverage: 14m²/LSpecifications:Colour: Black.Size: 500ml.
The Rustins Quick Dry Small Job Paint has been designed specifically for small painting projects. A water-based, hard-wearing paint for interior and exterior use that is touch dry in approximately 30 minutes. Suitable for use on wood and metal. A 250ml tin will cover approximately 3.25m² Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3, which makes the paint ideal to use on children's toys and furniture.The Rustins Quick Dry Small Job Paint has the following specification: Finish: SatinColour: ButtercupSize: 250ml
