Master Lock classic brass padlocks are a tough and reliable security solution. The solid brass body has a modern diamond shaped design and a brushed finish. The extensive range of brass padlock options means there is a Master Lock brass padlock for just about any need. Each padlock has a solid body, steel shackle and single locking lever. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Gates, containers, storage units and sheds.The Master Lock 120EURD has the following specifications: 20mm solid brass padlock - 11mm steel shackle, 4mm diameter - 3-pins cylinder
The Master Lock Excell™ Laminated Steel Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel, and dual ball bearing locking mechanisms for maximum pry resistance. The laminated steel padlocks are built for strength, with stainless steel and zinc outer components for exceptional weather resistance. They have either a precision 4-pin or 5-pin cylinder and recessed rivets that are chisel resistant. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains.The Master Lock M1EURDLH has the following specifications: 45mm Excell™ laminated steel padlock - 51mm Octagonal boron carbide long shackle, 8mm diameter - 4-pin tumbler cylinder - dual ball bearing locking
The Master Lock Aluminium Black Vinyl Cover padlocks are a tough and dependable security solution. With a modern black vinyl finish to the body, they are an appealing solution for day-to-day reliability. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) are also available. Padlocks are available with 3-pin and 4-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. The black vinyl cover also helps protect surfaces from scratching. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested uses: Lockers, trunks, cupboards and sheds.The Master Lock 9140EURDBLK has the following specifications: 40mm aluminum padlock with black vinyl cover - 21mm hardened steel shackle, 6mm diameter - 4-pins
The Master Lock Aluminium Black Vinyl Cover padlocks are a tough and dependable security solution. With a modern black vinyl finish to the body, they are an appealing solution for day-to-day reliability. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) are also available. Padlocks are available with 3-pin and 4-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. The black vinyl cover also helps protect surfaces from scratching. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested uses: Lockers, trunks, cupboards and sheds.The Master Lock 9130EURDBLK has the following specifications: 30mm aluminium with black vinyl cover padlock - 18mm hardened steel shackle, 5mm diameter - 4-pins
The Master Lock S2394 Universal Mini Circuit Breaker Lockout Device locks virtually all miniature ISO/DIN pin-out circuit breakers throughout the world. The patented device features a thumb turn dial screw for easy attachment, no tools required. Device attaches to circuit breaker and makes dial inaccessible in the locked position to prevent removal. Padlock can be applied horizontally or vertically and design allows device to be mounted side-by-side on adjacent breakers. Device works with all American Lock® and Master Lock® safety padlocks and lockout hasps (does not include ALO80 or ALO802).
The Masterlock Zenex™ Lockout non-conductive padlocks have dielectric protection and are non-sparking, with either a composite nylon, hardened steel or stainless steel shackle. They are the optimal safety padlock, designed exclusively for a Lockout/Tagout system. They are durable, standardised, substantial and identifiable for OSHA 1910.147 compliance. The lockout padlock has a Zenex™, UV stable composite body and 6mm diameter composite nylon or 4.76mm stainless steel shackle, it is corrosion and chemical resistant and can withstand temperatures ranging from -57 ° C to +177 ° C. The body sides and faces can be laser-engraved for permanent identification. Includes 'Danger' and 'Property of' padlock labels. Key retaining, supplied with a single key.Stainless steel shackle
The Master Lock Lockout Gate Valve Cover has Zenex™ composite body, which withstands chemicals and extreme temperatures ranging from -57 ° C to +177 ° C. The cover completely surrounds the valve handle to prevent accidental operation. The unique patented rotating design allows for easier installation in confined spaces and insulated pipes. The Centre knockout can be removed for rising stem gate valves. Device can be locked with up to 2 padlocks. 'Danger DO NOT OPERATE' label supplied.Can lock valve sizes 50-125mm (2-5 in).
UNION's basic range of ESSENTIAL products are uncomplicated products which provide true value for money without compromising everyday performance and quality. The ESSENTIAL 3 Lever Mortice Deadlocks can be installed in many UK mortices without the need for additional carpentry or spoiling the edge of the door. The 12.5mm deadbolt can be locked or unlocked by key from either side and provides secure positive deadlocking. The deadlock has a single piece forend with matching strike.Forend finish: Polished brass.Case size: 79mm x 72mm.Backset: 58mm. This is the measurement from the edge of the door to the centre of the keyhole.
The Yale PM562 British Standard 5 lever mortice deadlocks offer a very high level of security and are suitable for use on external timber doors. The deadbolt is locked or unlocked by key from either side. The PM562 series lock are recommended by insurance companies, kitemarked to BS3621: 2007 and has been approved by the police Secured by Design initiative. These deadlocks also have a 20mm anti-saw deadbolt, an anti-drill case and have a 15 year guarantee. A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.The Yale Locks YALPM562PB30 PM562 Hi-Security BS 5 Lever Mortice Dead Lock 68mm 3 inch comes in the following:Finish: Polished BrassCase Size: 81mm x 89mm (3 inch)Backset: 57mm This is the measurement from the edge of the door to the centre of the keyhole.
The Yale 706 nightlatch is a traditional style nightlatch with classic styling. The deadlocking snib function enables the latch to be held back or deadlocked internally. The nightlatch is key operated from the outside and has a knob handle for operation from inside. The 706 nightlatch has a 40mm backset, this is the measurement from the edge of the door to the centre of the keyhole. Locks with a 40mm backset are normally used where there is restricted space, such as on a narrow glass panelled door. Case Finish: Electro Nickle Brass.Cylinder Finish: Polished Brass. Supplied with 1109 external cylinder.
The Union 3G114 C-Series BS 5 Lever Mortice Deadlocks are suitable for use on timber doors hinged on the left or right with the keys being suitable for use on doors up to 50mm thick. The lock has a deadbolt operation and is locked or unlocked by key from either side. It has force resistant, anti drill, anti-pick and anti-saw security features and is available with square forend and striking plate with a 20mm bolt throw. The 3G114 mortice deadlocks are supplied with one plain escutcheon and one escutcheon with a cover plate, finished to match the faceplate/strike. The 3G114 series locks are recommended by insurance companies, kitemarked to BS3621: 2007 and has been approved by the police Secured by Design initiative. Case: Silver powder coatBox Strike Assembly: Painted to match forendDeadbolt: Brass, with hardened steel rollersKeys supplied: Standard differ supplied with 2 keys. For locks to pass please specify number of keys required.Key Blank Number: B-K722Cut Key Number: B-5LCNB Not suitable for master keyingRebate Kit: B-3G114R (13mm, 19mm and 25mm) EN1634-1 assessed for use on 60 minute timber fire doors A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Visi packed.Forend Finish: Brass Case Size: 80mm x 77mm (3 in) Backset: 53mm This is the measurement from the edge of the door to the centre of the keyhole.
The ABUS E60 Euro profile double cylinders are suitable for wooden, aluminium & most PVCu doors. They have a precision, mushroom pin and paracentric keyway which offers comprehensive anti-pick protection, also they have a hardened steel anti-drill spring & pin protection with 8 anti-drill pins in every keyway. For emergency and convenience the outside key can operate the lock with an internal key in place. How to measure a Euro Profile Cylinder: A Distance from internal end of cylinder to centre of camB Distance from external end of cylinder to centre of cam
950 Series Steel-o-Flex locks made with 25mm hardened steel shells and high tensile cable. ABUS PLUS disc cylinder offers maximum precision for securing against intelligent attempts to break open. 250,000 different key variations. The through hardened steel construction resists physical attack and the PVC sheathing prevents damage to the bicycle paintwork. Ideal for securing cycles with a high risk of theft. Sold Secure. Where to use it: Offering two-wheelers a high level of security against theft How it works: Lock two-wheeler to a fixed object (e.g. lamppost, road sign, fence) Technology: Hardened overlapping steel jacket envelops a strong steel cable - double security Strong PVC sheathing provides prevents damage to the bicycle paintwork Quality automatic locking ABUS cylinder lock with hardened steel protection to protect against drilling and pulling attacks. Length: 100cm.
The ABUS Silver Rock™ 5 Padlock has a stable lock body made from zinc with a brushed stainless steel look. Fitted with a high-security, heavy zinc shackle and a blue plastic bumper for protection against scratching of protected surfaces. For increased protection there is a precision 5-pin cylinder with paracentric key profile and a Nano Protect™ bolt. They provide security for items/goods of medium value or where there is an average risk of theft. Suitable for securing doors, gates, cupboards, lockers, toolboxes, basement windows, sheds, switch boxes etc.This ABUS Silver Rock™ 5 Padlock has the following specification: Overall Width: 42.4mmOverall Height: 65mmOverall Depth: 20mm Shackle Height: 40mmShackle Width: 22mmShackle Diameter: 6.5mm Pack Size: 1Keyed Alike No.: 6404
Master Lock classic brass padlocks are a tough and reliable security solution. The solid brass body has a modern diamond shaped design and a brushed finish. The extensive range of brass padlock options means there is a Master Lock brass padlock for just about any need. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) is also available. Padlocks are available with 4-pin, 5-pin or 6-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Gates, containers, storage units and sheds.The Master Lock 150EURDLJ has the following specifications: 50mm solid brass padlock - 64mm hardened steel extra long shackle, 7mm diameter. - 5-pins
The ABUS 158 Series Combination Padlock with a solid die-cast zinc body and a hardened steel shackle. 3-digit (40mm), 4-digit (50mm), or 5-digit (65mm) resettable combination where you can set your own PIN. Ideal for medium security requirements where convenience of use is a high priority (e.g. schools, companies).The ABUS 158/50HB50 Long Shackle Combination Padlock has the following specification: Overall Width: 51mmShackle Diameter: 8mmShackle Clearance: Horizontal: 25mm, Vertical: 57mm.Overall Height: 120mm.Overall Body Thickness: 23mm.
The Henry Squire Lion Range pin tumbler padlocks with stainless steel springs throughout and extra thick cases of solid brass. They have a thicker body section than the Leopard Range with a larger shackle diameter and more key differs, offering a higher level of security. Suitable for indoor and outdoor use. Hardened steel shackles on padlocks 25-60mm, and the 5 pin versions offer 1,500 key variations. Keyed alike available to order. CRIMESTOPPERS endorsed.Designed for areas where there is a medium risk of theft. Ideal for Cupboards, Sheds, Gates, etc.Squire Security Rating 8 (Based on a Rating of 1-15).Overall Width: 60mm.Overall Height: 88.5mm.Overall Thickness: 18.6mm.Shackle Diameter: 9.5mm.Vertical Shackle Clearance: 35.5mm.Horizontal Shackle Clearance: 33.5mm.Hardened Steel Shackle.1500 Key Variations.
The Henry Squire Lion Range pin tumbler padlocks with stainless steel springs throughout and extra thick cases of solid brass. They have a thicker body section than the Leopard Range with a larger shackle diameter and more key differs, offering a higher level of security. Suitable for indoor and outdoor use. Hardened steel shackles on padlocks 25-60mm, and the 5 pin versions offer 1,500 key variations. Keyed alike available to order. CRIMESTOPPERS endorsed.Designed for areas where there is a low to medium risk of theft. Ideal for Toolboxes, Lockers, Cupboards, Sheds, Gates, Greenhouses, etc. Squire Security Rating 5 (Based on a Rating of 1-15). Overall Width: 39.5mm.Overall Height: 62.9mm.Overall Thickness: 14mm. Shackle Diameter: 6mm.Vertical Shackle Clearance: 21.1mm.Horizontal Shackle Clearance: 22.5mm. Hardened Steel Shackle.1500 Key Variations.
The ABUS 70IB Series Marine grade padlocks have a solid brass body sealed in a protective vinyl cover with drainage channels to protect the cylinder against water and dirt. The shock absorbing vinyl casing prevents damage to polished surfaces. They have a precision pin tumbler cylinder with a stainless steel shackle and rust-free internal components, for medium security requirements in severe weather and environmental conditions, ideal for securing to vehicles and boats. The inside parts are made of 100% rust-proof materials and have drainage grooves to carry off penetrating water. They also feature a double bolted shackle and a self locking cylinder. Codes ending LSC indicate a long shackle. Keyed alike available.This ABUS 70IB/45 Aqua Safe Brass Padlock is supplied carded and has the following specification: ABUS Security Level: 5. Shackle Width: 20mm.Shackle Height: 24mm.Shackle Diameter: 8mm. Overall Width: 49mm.Overall Height: 68mm.Overall Depth: 28mm.
The ABUS 70IB Series Marine grade padlocks have a solid brass body sealed in a protective vinyl cover with drainage channels to protect the cylinder against water and dirt. The shock absorbing vinyl casing prevents damage to polished surfaces. They have a precision pin tumbler cylinder with a stainless steel shackle and rust-free internal components, for medium security requirements in severe weather and environmental conditions, ideal for securing to vehicles and boats. The inside parts are made of 100% rust-proof materials and have drainage grooves to carry off penetrating water. They also feature a double bolted shackle and a self locking cylinder. Codes ending LSC indicate a long shackle. Keyed alike available.This ABUS 70IB/50 Aqua Safe Brass Padlock is supplied carded and has the following specification: ABUS Security Level: 6. Shackle Width: 23.5mm.Shackle Height: 26.5mm.Shackle Diameter: 9mm. Overall Width: 55mm.Overall Height: 76mm.Overall Depth: 31mm.
All Master Lock hardened steel chains with square links for better resistance to cutting. Vinyl cover prevents the chain from scratching your equipment. Ideal for securing residential gates, industrial/commercial units, gates, fences and garden furniture.Size: 1m x 10mm.
The Henry Squire CP Combination Padlock deliver heavy-duty security and there are no keys to lose. The die cast alloy lock body has a dual compound protective cover for high corrosion resistance and excellent weather protection. All locks can be coded and re-coded as required and they can be coded alike, so one code opens several locks. The combination wheels are spaced comfortably apart, making them easier to use, with push button operation. The recodable mechanism offers 10,000 possible combinations on the 4-wheel and 100,000 possible combinations on the 5-wheel, making it very difficult to pick. It comes with a 10 Year Guarantee. CRIMESTOPPERS endorsed.The Henry Squire CP50/1.5 38mm Long Shackle Combination Padlock 50mm has a 4-wheel re-codeable combination offering upto 10,000 combinations and is supplied with code changing instructions inside the pack. Squire Security Rating 7 (Based on a Rating of 1-15). Specification Body Width: 50.0mm.Body Thickness: 26.0mm.Shackle Diameter: 8mm.Verticle Shackle Clearance: 38.1mm.Horizontal Shackle Clearance: 22.6mm.
The ABUS 64TI Series TITALIUM™ Padlocks are ideal for medium to high risk of theft, recommended for a wide range of security requirements. All models in this series have a paracentric keyway and chrome plated cylinder cores. Hardened steel shackle, 30mm and above, with NANO PROTECT™ shackle coating which assures security and high corrosion resistance. TITALIUM™ is based on a special aluminium alloy, a mixture of materials is created that is extremely durable and lightweight; similar to the process used in aircraft construction. Compared to classic brass padlocks, the locks in the TITALIUM™ series are around 30% lighter but feature the same level of security making them excellent value for money. Sizes: 20 to 25mm, ideal for securing bags, suitcases, jewel cases, tool boxes, etc. Sizes 30mm and up, ideal for securing valuables/goods of medium value or at a an average risk of theft.This ABUS 64TI/25 TITALIUM™ Padlock is supplied carded and has the following specification: ABUS Security Level: 3. Shackle Width: 13mm.Shackle Height: 13.5mm.Shackle Diameter: 4mm. Overall Width: 24.5mm.Overall Height: 42mm.Overall Depth: 12mm.
The ABUS E60 Euro profile double cylinders are suitable for wooden, aluminium & most PVCu doors. They have a precision, mushroom pin and paracentric keyway which offers comprehensive anti-pick protection, also they have a hardened steel anti-drill spring & pin protection with 8 anti-drill pins in every keyway. For emergency and convenience the outside key can operate the lock with an internal key in place. How to measure a Euro Profile Cylinder: A Distance from internal end of cylinder to centre of camB Distance from external end of cylinder to centre of cam
The ABUS 55 Series Brass Padlocks have inner components made from non-corrosive materials. Pin tumbler cylinder with anti-pick mushroom pins which resists picking, a hardened steel shackle which resists hacksaw attacks and is double bolted 30mm and above for increased shackle strength. Long shackle (HB) version available.This ABUS 55/50 Brass Padlock has the following specification: ABUS Security Level: 5. Shackle Width: 25mm.Shackle Height: 24mm.Shackle Diameter: 7mm. Overall Width: 48mm.Overall Height: 68mm.Overall Depth: 14mm.
The DEFENDER range of Brass Padlocks give protection against an opportunist attack. The range includes sizes from 20mm to 60mm with standard clearance shackles and a 40mm long shackle version. 30mm and upwards have Double Locking Hardened Steel Shackles. 40mm and upwards have 5-pin Cylinders. All sizes are available with a Keyed Alike option for extra convenience. Comes complete with 2 keys and a 2 year guarantee.1 x DEFENDER by SQUIRE Brass Padlock 60mm
The Union 2134E British Standard 5 lever mortice deadlocks are ideal for external timber doors hinged on the left or right with the keys being suitable for doors up to 54mm thick. The deadbolt is locked or unlocked by the key from either side, and a 20mm deadbolt for secure positive deadlocking and additional resistance against attack. 2134E features an anti-pick, anti-saw and anti-drill security, Chamfered bolt design that increases the performance of the lock under side load testing. The chamfer of the bolt also makes drilling attack more difficult, Supplied with covered escutcheon to match forend. The 2134E series locks are recommended by insurance companies, kitemarked to BS3621: 2007(British Standard) and has been approved by the police Secured by Design initiative. They are also covered by a 15 Year guarantee. Deadbolt Brass, with hardened steel rollersRebate Kit 2954 (13mm, 19mm or 25mm)Supplied with 3 steel nickel plated keysKey Blank Number KB430 A deadlock has a single deadbolt which is locked or unlocked and locked by means of a key from either side, whereas, a sashlock has both a deadbolt and a latch which is operated from either side by a lever handles. The security level of mortice deadlocks or sashlocks ranges from 2-5 levers. The higher the number of levers the more secure the lock is.Forend Finish: Brass (Striking Plate Finished to match forend) Case Size: 79.5mm x 71.5mm (3 in) Backset: 57.5mm This is the measurement from the edge of the door to the centre of the keyhole. Pack Type: Visi Pack
The Union StrongBOLT Mortice Bathroom Locks feature an easily reversible radius latch that uses the unique UNION SwitchLatch technology, meaning that the latch can be reversed without the need for tools. The anti-rattle adjustable strike enables on site fine tuning. The plastic splinter guard and radius inner forend allows easy installation and a professional finish. The lock has a chamfered bolt design to increase its performance under side load testing and makes drilling attack more difficult. Anti-pick and keyhole protection prevents forced entry by picking, and hardened steel pins provide resistance to attack from sawing. The 14mm deadbolt provides secure positive deadlocking and additional resistance against attack. It can be locked or unlocked by the cylinder from either sideThe Union Mortice Bathroom locks can be installed in the many UK mortices without the need for additional carpentry or spoiling the edge of the door.Forend finish: Stainless steel.Case size: 81 x 109.6mm. Backset: 57mm. This is the measurement from the edge of the door to the centre of the keyhole.Centre: 57mm. This is the measurement from the centre of the follower, which operates the handles, to the centre of the keyhole.
The Master Lock Excell™ Laminated Steel Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel, and dual ball bearing locking mechanisms for maximum pry resistance. The laminated steel padlocks are built for strength, with stainless steel and zinc outer components for exceptional weather resistance. They have either a precision 4-pin or 5-pin cylinder and recessed rivets that are chisel resistant. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains.The Master Lock M1EURDLJ has the following specifications: 45mm Excell™ laminated steel padlock - 64mm Octagonal boron carbide extra long shackle, 8mm diameter - 4-pin tumbler cylinder - dual ball bearing locking
Master Lock classic brass padlocks are a tough and reliable security solution. The solid brass body has a modern diamond shaped design and a brushed finish. The extensive range of brass padlock options means there is a Master Lock brass padlock for just about any need. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) is also available. Padlocks are available with 4-pin, 5-pin or 6-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Gates, containers, storage units and sheds.The Master Lock 130EURQNOP has the following specifications: 4 x 30mm solid brass padlocks - 16mm hardened steel shackle, 5mm diameter - 4-pins - keyed alike
The Masterlock Zenex™ Lockout non-conductive padlocks have dielectric protection and are non-sparking, with either a composite nylon, hardened steel or stainless steel shackle. They are the optimal safety padlock, designed exclusively for a Lockout/Tagout system. They are durable, standardised, substantial and identifiable for OSHA 1910.147 compliance. The lockout padlock has a Zenex™, UV stable composite body and 6mm diameter composite nylon or 4.76mm stainless steel shackle, it is corrosion and chemical resistant and can withstand temperatures ranging from -57 ° C to +177 ° C. The body sides and faces can be laser-engraved for permanent identification. Includes 'Danger' and 'Property of' padlock labels. Key retaining, supplied with a single key.Dimensions:Body: 38 x 44mm.Plastic Shackle: 38mm x 20mm clearance.
Master Lock Grip Tight™ circuit breaker lock outs not only have a narrow profile for side-by-side lock out, they also have a secure and simple mounting for a solid lock out. The body is made from hardened steel.
The Master Lock Excell™ Brass Finish Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel, and dual ball bearing locking mechanisms for maximum pry resistance. Theses padlocks are built for strength and are made from laminated steel with zinc outer components and a brass finish for weather resistance. They have either a precision 4-pin or 5-pin cylinder and recessed rivets that are chisel resistant. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: Gates, sheds, storage units, fences, containers and chains.The Master Lock M1BEURDLF has the following specifications: 45mm Excell™ laminated steel padlock with brass finish - 38mm Octagonal boron carbide long shackle, 8mm diameter - 4-pin tumbler cylinder - dual ball bearing locking
The Master Lock 1178D ProSeries® 4 Digit Padlock has a strong and durable die-cast zinc body with octagonal boron carbide alloy shackle gives the lock superior protection against forced removal by cutting. The resettable 4-digit lock has the possibility of over 10,000 combinations and the Deadlocking Mechanism protects against prying, shimming and rap attacks. The combination dials are extremely easy to use thanks to Master Lock's unique blind system, they're easy to turn even when you're using gloves or when light is poor. The lock is extremely sturdy thanks to the shackle seal and combination dial dust cover to protect internal integrity and protect against dirt and debris. Specification Body W x H: 57 x 50mm.Body Thickness: 31mm. Shackle W x H: 24 x 27mm.Shackle Thickness: 10mm.
