ABUS 130/180 high security hasp and staple made from tough whiteheart malleable iron which resists physical attack and a through hardened steel staple to fit 11mm Ø shackle padlocks. Ideal for use with ABUS 37/60 Granit padlock : CEN grade 4 security. Including coach bolts and backing plates for additional security. Where to use it: Securing sizeable objects (storerooms, containers, lorries) Securing objects with a high risk of theft Suitable for doors closing flush, i.e. door leaf and door frame are level Specification. Shackle Bore: 13.3mm.Length: 180mm.Width: 78mm.Security Rating: 10.
The ABUS 55 Series Brass Padlocks have inner components made from non-corrosive materials. Pin tumbler cylinder with anti-pick mushroom pins which resists picking, a hardened steel shackle which resists hacksaw attacks and is double bolted 30mm and above for increased shackle strength. Long shackle (HB) version available.This ABUS 55/50 Brass Padlock has the following specification: ABUS Security Level: 5.Keyed Alike Key Reference: 5502. Shackle Width: 25mm.Shackle Height: 24mm.Shackle Diameter: 7mm. Overall Width: 48mm.Overall Height: 68mm.Overall Depth: 14mm.
The ABUS 65 Series Marine Brass Padlocks have a body made from solid brass and a stainless steel shackle. The inner components are made from non-corrosive materials. Pin tumbler cylinder with anti-pick mushroom keys offers greater protection against manipulation. The padlock locks automatically, it does not require a key. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required.This ABUS 65IB/30 Brass Marine Padlock has the following specification: ABUS Security Level: 4.Keyed Alike Key Reference: 6304. Shackle Width: 32mm.Shackle Height: 32mm.Shackle Diameter: 8mm. Overall Width: 16mm.Overall Height: 17.5mm.Overall Depth: 5mm.
The Henry Squire SS50 50mm Hi-Security closed shackle combination padlock is purpose designed for extra-high security performance and extreme resistance against the threat of a sustained attack, with the added convenience of ‘no keys to lose’. These padlocks have a unique electrophoretic finish and body cover for excellent corrosion resistance, the range performs in even the harshest environments (200 hour salt spray tested). They are constructed of a solid hardened steel lock body and hardened boron alloy steel shackle - with a protective lock body cover. They operate using a fully recodable five-wheel dial with 10 digits - from zero to nine which offers over 100,000 code combinations. These padlocks are simple to recode and can be coded 'alike' so one code opens several locks, which makes them ideal for multi-users operating in high security or commercial environments. Ideal for securing commercial buildings, gates, warehouses, lorries, perimeter gates, trailers and high security doors. Body Width: 50mm.Body Thickness: 26mm.Shackle Diameter: 10mm.Vertical Shackle Clearance: 16mm.Horizontial Shackle Clearance: 15mm. CRIMESTOPPERS supported.
The Master Lock ProSeries® Weather Tough® Padlocks is designed to endure the toughest security applications by providing extra protection against corrosion, abuse and attack. They have tough boron alloy shackles, dual ball bearing locking mechanisms for maximum pry resistance and layered laminated steel cores for strength. Ideal for harsh outdoor conditions, the Weather Tough® xenoy outer casing delivers excellent weather resilience, protecting the lock from water, ice, dirt and grime. The precision pin cylinder delivers optimal pick resistance and is protected by a snap-on cap. All Master Lock Pro Series™ Padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: gates, sheds, storage units, fences, containers and chains.This Master Lock ProSeries® Weather Tough® Padlock has a precision 5-pin cylinder and the following specifications: Body Width: 60mmShackle Thickness: 9mmShackle Width x Height: 35 x 23mmType: Keyed Alike, Key Retaining
The ABUS 83WP Series Weatherproof Padlocks have a shackle and body made of hardened steel with NANO PROCTECT™ coating for increased corrosion resistance. Fitted with a durable weather cover that has drainage channels to protect the cylinder against water and dirt. Fitted with a 6-pin tumbler cylinder that features anti-pick mushroom pins, rust-free components and a patented pinning window. The padlock is fitted with a patented 'Z-Bar', can be adjusted to operate key retaining or non-key retaining, automatic locking or key to lock. Can be made to sample key or master-keyed on request.This ABUS 83WP/63 Extreme Weatherproof Padlock is supplied carded and has the following specification: ABUS Security Level: 9. Shackle Width: 25mm.Shackle Height: 35mm.Shackle Diameter: 11mm. Overall Width: 60mm.Overall Height: 106mm.Overall Depth: 30mm.
The ABUS 65 Series Brass Padlocks have a solid brass body and a hardened steel shackle with NANO PROTECT™ coating. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. Automatic locking mechanism. Sizes 20-25mm are ideal for securing valuables / goods of lesser value or at a low risk of theft. Such as bags, suitcases, jewellery boxes, cash boxes, etc. Sizes 30-60mm are ideal for securing valuables / goods of medium value or at an average risk of theft. Such as chains, doors, gates, cupboards, lockers, toolboxes, cellar windows, sheds, switchboards, etc.This ABUS 65/40HB40 Brass Padlock is supplied carded and has the following specification: ABUS Security Level: 5. Shackle Width: 22mm.Shackle Height: 40mm.Shackle Diameter: 6mm. Overall Width: 40mm.Overall Height: 77mm.Overall Depth: 15mm.
This Master Lock Excell™ Laminated Stainless Steel Padlock has the following specification: Body Width: 44mmShackle Height: 38mmShackle Thickness: 8mmShackle: Open
The ABUS 65 Series Brass Padlocks have a solid brass body and a hardened steel shackle with NANO PROTECT™ coating. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. Automatic locking mechanism. Sizes 20-25mm are ideal for securing valuables / goods of lesser value or at a low risk of theft. Such as bags, suitcases, jewellery boxes, cash boxes, etc. Sizes 30-60mm are ideal for securing valuables / goods of medium value or at an average risk of theft. Such as chains, doors, gates, cupboards, lockers, toolboxes, cellar windows, sheds, switchboards, etc.This ABUS 65/50 Brass Padlock has the following specification: ABUS Security Level: 6.Keyed Alike Key Reference: 6506. Shackle Width: 28mm.Shackle Height: 29mm.Shackle Diameter: 7mm. Overall Width: 50mm.Overall Height: 77mm.Overall Depth: 18mm. The cylinder can be re-keyed to match an existing key (Keyed Alike).
The ABUS 85 Series Brass Padlocks have a soild brass lock body and high quality, rust-free inner components. Fitted with a hardened steel shackle; double bolted with NANO PROTECT™ shackle coating, 30mm and above. The precision pin cylinder features anti-pick mushroom pins and a paracentric keyway for increased protection against manipulation. Automatic locking, the padlock can be locked with a key, just push down the shackle. Ideal for securing a wide range of objects. Sizes 20-40mm: for securing valuables/goods of medium value or at an average risk of theft. Sizes 50-70mm: for securing valuables/goods of greater value or at a high risk of theft.This ABUS 85/50 Brass Padlock has the following specification: ABUS Security Level: 7.Keyed Alike Key Reference: 2745. Shackle Width: 29mm.Shackle Height: 28mm.Shackle Diameter: 8mm. Overall Width: 50mm.Overall Height: 77mm.Overall Depth: 17mm.
The ABUS 85 Series Brass Padlocks have a soild brass lock body and high quality, rust-free inner components. Fitted with a hardened steel shackle; double bolted with NANO PROTECT™ shackle coating, 30mm and above. The precision pin cylinder features anti-pick mushroom pins and a paracentric keyway for increased protection against manipulation. Automatic locking, the padlock can be locked with a key, just push down the shackle. Ideal for securing a wide range of objects. Sizes 20-40mm: for securing valuables/goods of medium value or at an average risk of theft. Sizes 50-70mm: for securing valuables/goods of greater value or at a high risk of theft.This ABUS 85/50 Brass Padlock has the following specification: ABUS Security Level: 7.Keyed Alike Key Reference: 270. Shackle Width: 29mm.Shackle Height: 28mm.Shackle Diameter: 8mm. Overall Width: 50mm.Overall Height: 77mm.Overall Depth: 17mm.
The ABUS 80TI Series TITALIUM™ Padlocks are the flagship of the TITALIUM™ family of padlocks. They make an impression with both their looks and technical properties. They have a solid lock body made from TITALIUM™ aluminium alloy, a mixture of materials is created that is extremely durable and lightweight. It has a 6-pin precision cylinder with paracentric keyway giving protection against both forced or manipulative break-ins. A chrome plated cylinder core and double bolted hardened steel shackle with NANO PROTECT™ shackle coating assures security and high corrosion resistance. Suitable for securing goods/valuables of higher value or at a high risk of theft. Ideal for doors, gates, cupboards, lockers, tool boxes, etc.This ABUS 84TI/50 TITALIUM™ Padlock has the following specification: ABUS Security Level: 8. Shackle Width: 25mm.Shackle Height: 35mm.Shackle Diameter: 10mm. Overall Width: 50mm.Overall Height: 93mm.Overall Depth: 23mm.
The ABUS 85 Series Brass Padlocks have a soild brass lock body and high quality, rust-free inner components. Fitted with a hardened steel shackle; double bolted with NANO PROTECT™ shackle coating, 30mm and above. The precision pin cylinder features anti-pick mushroom pins and a paracentric keyway for increased protection against manipulation. Automatic locking, the padlock can be locked with a key, just push down the shackle. Ideal for securing a wide range of objects. Sizes 20-40mm: for securing valuables/goods of medium value or at an average risk of theft. Sizes 50-70mm: for securing valuables/goods of greater value or at a high risk of theft.This ABUS 85/40HB63 Brass Padlock is supplied carded and has the following specification: ABUS Security Level: 6. Shackle Width: 23mm.Shackle Height: 63mm.Shackle Diameter: 6mm. Overall Width: 40mm.Overall Height: 102mm.Overall Depth: 15mm.
The ABUS GRANIT™ Plus Padlocks offer the highest protection against manipulation. The cylinder is inserted from the top offering optimum drill and pull resistance. The body and shackle are both made from hardened alloy steel with a cataphoretic coating and rust free components which give 40 years of corrosion protection. All GRANIT™ padlocks endure a -40° freeze and impact test, and are bolt cutter, drill and saw resistant. Ideal for securing valuables/goods of great value or at a very high risk of theft, warehouses, factory gates, containers and lorries. Meets special requirements of insurance companies.This ABUS Granit™ Plus Padlock has an open type shackle and is supplied with 2 keys, 1 has an LED light. RK: cylinder can be re-keyed to match an existing ABUS-Plus key. Specification Pull Resistance: 8 Tonne.ABUS Security Level: 10. Shackle Width: 29mm.Shackle Height: 35mm.Shackle Diameter: 14mm. Overall Width: 77mm.Overall Height: 103mm.Overall Depth: 37mm.
Henry Squire Solid Hardened Steel Padlock combines compact design with market leading product performance in the 50mm version, while the 65mm are tested to the highest CEN grades 5 & 6. All models are designed to resist the harshest of attack, these locks function reliably in the worst weather conditions. Hardened Boron alloy steel shackles. Re-keyable 6-pin tumbler in both 50mm & 65mm versions giving over 250,000 key differs. The 50mm is version also available with a 5-pin tumbler. Available open and closed shackle. Keyed alike and masterkeyed available to order. CEN rated Now available in customer focused packaging: ‘@Work @Home @Leisure’ CRIMESTOPPERS supportedThe Henry Squire SS50S Stronghold Solid Steel Padlock 50mm Keyed Alike has a 6 pin tumbler and offers upto 260,000 different key variations. It has a secuirty rating of CEN 4. Specification Body Width: 50.0mm.Body Thickness: 26.0mm.Shackle Diameter: 10.0mm.Vertical Shackle Clearance: 26.0mm.Horizontal Shackle Clearance: 22.0mm.
The Squire Warrior High-Security Padlocks are made from armoured steel. Constructed for extreme durability outdoors, these heavy-duty padlocks are designed for securing garages, site equipment, vans, perimeter gates, storage areas and numerous other commercial applications. The padlocks have die cast internal mechanisms which are protected by the hardened armoured steel exterior. This provides excellent resistance to attack, which is further assisted by the use of hardened boron alloy for the shackles. The bodies are covered in a tactile, weather resistant jacket. These combination padlocks are re-codeable and uses a patented mechanism which provides 100,000 variations on the 5-wheel models (65mm) and 10,000 variations on the 4-wheel models ( 45mm and 55mm). CRIMESTOPPERS supported.Specifications: Type: Long shackle.Size: 65mm.
The ABUS 158 Series Combination Padlock with a solid die-cast zinc body and a hardened steel shackle. Weather resistant. 4-digit (50mm), or 5-digit (65mm) resettable combination where you can set your own PIN. Ideal for medium security requirements where convenience of use is a high priority (e.g. schools, companies).The ABUS 158CS/65 Closed Shackle Combination Padlock ;has the following specification: Overall Width: 65mmShackle Diameter: 10mmShackle Clearance: Horizontal: 27mm, Vertical: 40mm.Overall Height: 116mm.Overall Body Thickness: 26mm.
The Master Lock Excell™ Stainless Steel Discus Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel. Offering optimum weather resistance with the additional security of a shrouded shackle, which is much tougher to pull/pry open. They have a precision 4-pin cylinder and are supplied with a Lifetime Warranty against mechanical failure. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains.The Master Lock M40EURT has the following specifications: 2 x 70mm Excell™ stainless steel discus padlocks - Shrouded octagonal boron carbide shackle, 10mm diameter - 4-pin tumbler cylinder - keyed alike
The Master Lock Excell™ Laminated Steel Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel, and dual ball bearing locking mechanisms for maximum pry resistance. The laminated steel padlocks are built for strength, with stainless steel and zinc outer components for exceptional weather resistance. They have either a precision 4-pin or 5-pin cylinder and recessed rivets that are chisel resistant. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains.The Master Lock M1EURT has the following specifications: 2 x 45mm Excell™ laminated steel padlocks - Octagonal boron carbide shackle, 8mm diameter - 4-pin tumbler cylinder - dual ball bearing locking - keyed alike
The Master Lock Excell™ Brass Finish Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel, and dual ball bearing locking mechanisms for maximum pry resistance. Theses padlocks are built for strength and are made from laminated steel with zinc outer components and a brass finish for weather resistance. They have either a precision 4-pin or 5-pin cylinder and recessed rivets that are chisel resistant. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: Gates, sheds, storage units, fences, containers and chains.The Master Lock Excell™ Brass Finish Padlock has the following specifications: Size: 45mm.Octagonal Boron Carbide Shackle: 8mm Diameter.Tumbler Cylinder: 4-pin with dual ball bearing locking.
The Master Lock Aluminium Black Vinyl Cover padlocks are a tough and dependable security solution. With a modern black vinyl finish to the body, they are an appealing solution for day-to-day reliability. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) are also available. Padlocks are available with 3-pin and 4-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. The black vinyl cover also helps protect surfaces from scratching. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested uses: Lockers, trunks, cupboards and sheds.The Master Lock 9140EURDBLKLF has the following specifications: 40mm aluminium with black vinyl cover padlock - 38mm long hardened steel shackle, 6mm diameter - 4-pins
The Master Lock Excell™ Resettable Combination Padlock features a 58mm wide shrouded solid brass body for superior corrosion resistance and a 28mm octagonal boron carbide shackle with shrouded feature for maximum cut resistance. A shackle seal and dial dust cover help protect internal components and dials from dirt and corrosion, for trouble-free operation. The set-your-own combination feature offers convenience and security with 10,000 possible combinations, no reset tool required. Large ergonomic dials with exclusive blind dial feature, permit operation with gloves, in low light or complete darkness. The deadlocking mechanism protects against prying, shimming and rap attacks. Specification: Body Width: 58mmShackle Clearance (WxH): 24 x 28mmShackle Diameter: 9mm
The Master Lock Excell™ Stainless Steel Discus Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel. Offering optimum weather resistance with the additional security of a shrouded shackle, which is much tougher to pull/pry open. They have a precision 4-pin cylinder and are supplied with a Lifetime Warranty against mechanical failure. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains.Specifications:80mm Excell™ stainless steel discus padlock - Shrouded octagonal boron carbide shackle, 12mm diameter - 4-pin tumbler cylinder
The DEFENDER range of Brass Padlocks give protection against an opportunist attack. The range includes sizes from 20mm to 60mm with standard clearance shackles and a 40mm long shackle version. 30mm and upwards have Double Locking Hardened Steel Shackles. 40mm and upwards have 5-pin Cylinders. Comes complete with 2 keys and a 2 year guarantee. 1 x DEFENDER by SQUIRE Brass Padlock 40mm
The ABUS 65 Series Marine Brass Padlocks have a body made from solid brass and a stainless steel shackle. The inner components are made from non-corrosive materials. Pin tumbler cylinder with anti-pick mushroom keys offers greater protection against manipulation. The padlock locks automatically, it does not require a key. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required.This ABUS 65IB/40 Brass Marine Padlock is supplied carded and has the following specification: ABUS Security Level: 5. Shackle Width: 22mm.Shackle Height: 22.5mm.Shackle Diameter: 6.5mm. Overall Width: 40mm.Overall Height: 62mm.Overall Depth: 15mm.
The ABUS 65 Series Brass Padlocks have a solid brass body and a hardened steel shackle with NANO PROTECT™ coating. The inner components are made from non-corrosive materials. The precision pin cylinder has mushroom counter pins with the paracentric key-way offering greater protection against manipulation. Automatic locking mechanism. Sizes 20-25mm are ideal for securing valuables / goods of lesser value or at a low risk of theft. Such as bags, suitcases, jewellery boxes, cash boxes, etc. Sizes 30-60mm are ideal for securing valuables / goods of medium value or at an average risk of theft. Such as chains, doors, gates, cupboards, lockers, toolboxes, cellar windows, sheds, switchboards, etc.This ABUS 65/60 Brass Padlock is supplied carded and has the following specification: ABUS Security Level: 6. Shackle Width: 33mm.Shackle Height: 35mm.Shackle Diameter: 10mm. Overall Width: 60mm.Overall Height: 97mm.Overall Depth: 19mm.
The DEFENDER Range of Combination products are based on the design to offer protection at an affordable cost. Bodies are made of die-cast material. Combinations are resettable and allow protection without the need to carry a key, so overcome the issue of lost keys. 40mm version utilises a 4-wheel mechanism which provides 10,000 differs, the smaller versions have 3-wheels giving 1,000 differs. Available in 3 sizes designed to be used on luggage, toolboxes and lockers. Comes complete with a 2 year guarantee.1 x DEFENDER by SQUIRE Black Diecast Combination Padlock 40mm
The Henry Squire WS75S Stronghold Container Block Lock is a high security container lock with tamper proof technology, purpose designed for extreme resistance against the threat of a sustained attack. It has a 80mm solid hardened steel lock body with a electrophoretic finish for excellent anticorrosion resistance, even in challenging weather conditions. The 12mm diameter hardened boron alloy steel shackle rotates for extra antisaw protection and ultimate security performance. Easy to operate, the rekeyable 6 pin, antibump, tumbler locking mechanism features antipick technology and offers over 260,000 key variations. Specification Body width: 80mm.Body thickness: 25mm.Shackle diameter: 12mm.Vertical shackle clearance: 14mm.Horizontal shackle clearance: 27mm.Overall height: 65mm.Shackle material: Boron steel.Mechanism: 6 pin tumbler.Body material: Solid hardened steel.Security rating: CEN grade 4. CRIMESTOPPERS endorsed.Henry Squire WS75S Stronghold Container Block Lock 80mm
The Henry Squire Lion Range pin tumbler padlocks with stainless steel springs throughout and extra thick cases of solid brass. They have a thicker body section than the Leopard Range with a larger shackle diameter and more key differs, offering a higher level of security. Suitable for indoor and outdoor use. Hardened steel shackles on padlocks 25-60mm, and the 5 pin versions offer 1,500 key variations. Keyed alike available to order. CRIMESTOPPERS endorsed.Designed for areas where there is a low risk of theft, to secure low value items. Ideal for Toolboxes, Lockers, Cupboards, etc. Squire Security Rating 3 (Based on a Rating of 1-15). Overall Width: 31.5mm.Overall Height: 55.4mm.Overall Thickness: 13mm. Shackle Diameter: 5.5mm.Vertical Shackle Clearance: 19.5mm.Horizontal Shackle Clearance: 16.5mm. Hardened Steel Shackle.230 Key Variations.
The DEFENDER range of Laminated Steel Padlocks provide a higher level of protection than a brass padlock. The padlocks use a 5-pin cylinder to provide extra key security, plus a hardened steel shackle, utilising a double locking mechanism, to provide extra resistance to physical attack. Designed to be used with standard hasps and staples on sheds and garages. Currently available in 2 sizes to meet most needs, with option to have Keyed Alike suites for extra convenience. Comes complete with 2 keys and a 2 year guarantee.1 x DEFENDER by SQUIRE Laminated Steel Padlock 50mm Keyed Alike
100 Series hasp and staple with concealed hinge pin and concealed screw heads, corrosion protected. Only the carded versions include fixings. 100/80 and 100/100 have hardened steel staples. Where to use it: Designed for doors closing flush, i.e. door leaf and door frame are level DG versions: with double joint designed for doors not closing flush, i.e. door leaf and door frame are not level, and corner solutions.Hasp length: 60mmHasp width: 20mmStaple bore dia: 7mm
The ABUS 64TI Series TITALIUM™ Padlocks are ideal for medium to high risk of theft, recommended for a wide range of security requirements. All models in this series have a paracentric keyway and chrome plated cylinder cores. Hardened steel shackle, 30mm and above, with NANO PROTECT™ shackle coating which assures security and high corrosion resistance. TITALIUM™ is based on a special aluminium alloy, a mixture of materials is created that is extremely durable and lightweight; similar to the process used in aircraft construction. Compared to classic brass padlocks, the locks in the TITALIUM™ series are around 30% lighter but feature the same level of security making them excellent value for money. Sizes: 20 to 25mm, ideal for securing bags, suitcases, jewel cases, tool boxes, etc. Sizes 30mm and up, ideal for securing valuables/goods of medium value or at a an average risk of theft.This ABUS 64TI/30HB60 TITALIUM™ Padlock has the following specification: ABUS Security Level: 4. Shackle Width: 16mm.Shackle Height: 60mm.Shackle Diameter: 5mm. Overall Width: 30mm.Overall Height: 93mm.Overall Depth: 13mm.
ABUS 300 Series locking bolt, all steel construction, hardened steel bolt with hidden screws and corrosion protected. Where to use: Ideal for securing sheds, garages and gates.ABUS 300/120 Locking Bolt Specification Shackle Bore: 10.5mm.Length: 120mm.Width: 46mm.
The ABUS 65 Series Master Keyed Padlocks have a body made from solid brass, hardened steel shackle and hardened steel alloy shackle. The inner components are made from non-corrosive materials. The tumbler cylinder with anti-pick mushroom pin offers greater protection against manipulation. They are suitable for low to medium security requirements and are also suitable where a strong requirement for service performance and longevity is required. The padlock locking is automatic, it does not require a key Master keyed facility available, whereby a number of padlocks can be opened with a common key.This ABUS 65/40 Brass Padlock has the following specification: Shackle Width: 22mm.Shackle Height: 22.5mm.Shackle Diameter: 6.5mm. Overall Width: 40mm.Overall Height: 62mm.Overall Depth: 15mm.
The ABUS 64TI Series TITALIUM™ Padlocks are ideal for medium to high risk of theft, recommended for a wide range of security requirements. All models in this series have a paracentric keyway and chrome plated cylinder cores. Hardened steel shackle, 30mm and above, with NANO PROTECT™ shackle coating which assures security and high corrosion resistance. TITALIUM™ is based on a special aluminium alloy, a mixture of materials is created that is extremely durable and lightweight; similar to the process used in aircraft construction. Compared to classic brass padlocks, the locks in the TITALIUM™ series are around 30% lighter but feature the same level of security making them excellent value for money. Sizes: 20 to 25mm, ideal for securing bags, suitcases, jewel cases, tool boxes, etc. Sizes 30mm and up, ideal for securing valuables/goods of medium value or at a an average risk of theft.This ABUS 64TI/45 TITALIUM™ Padlock is supplied carded has the following specification: ABUS Security Level: 5. Shackle Width: 25mm.Shackle Height: 24mm.Shackle Diameter: 7mm. Overall Width: 45mm.Overall Height: 68mm.Overall Depth: 15mm.
The ABUS T65AL Series Coloured Padlocks have a precision extruded, cut and drilled pure aluminium body which is light and strong, through hardened shackle, zinc plated brass lock mechanism which prevents chemical corrosion and a rust-free, 5-pin tumbler mechanism. The padlock's coloured coating is a special formula which allows you to write your name or other information using coloured pens or permanent markers. Specifiation ABUS Security Level: 5. Shackle Width: 22mm.Shackle Height: 22.5mm.Shackle Diameter: 6.5mm. Overall Width: 40mm.Overall Height: 62mm.Overall Depth: 15mm.1 x ABUS T65AL/40mm My Lock Aluminium Padlock Yellow Keyed Alike Key Reference: 6401.
