These Faithfull vitrified grinding wheels are suitable for use on most types of bench grinders. For tungsten carbide and non ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes: 31.75mm 19.05mm 15.88mm 12.77mm
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 20mm x 31.75mmGrit: 60Bond Hardness: NM/S: 35Max R.P.M: 3,350
The Faithfull CHUCKMAX is a SDS Max to SDS Plus Adaptor with a 225mm overall length. It enables the use of SDS Plus shanked drill accessories with an SDS Max machine.
Faithfull heavy-Duty keyed chuck for use on both Rotary and Impact drills. Fitted with an anti-thrust bearing to increase the amount of grip and to prevent slipping when under load. Designed in accordance to DIN 6349The FAICHUCK12 comes complete with key and adaptor for use with SDS and SDS Plus machines.When used with SDS machines, the drill MUST NOT be used in hammer mode1/2in x 20 UNF thread. Capacity 13mmComplete with chuck key.
The Makita 194385-5 Plunge Saw Clamp Set has been designed for use with the Makita SP6000 Plunge Saw. These clamps are mainly used when using the saw in conjunction with a guide rail. They hold the guide rail/material securely in place.
This Faithfull SDS Plus Chuck Adaptor allows drill chucks to be used with SDS and SDS Plus machines. It converts SDS to 1/2in - 20UNF. Please note: Drill MUST NOT be used in hammer mode when using this adaptor.
The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.The HSS Drill Bits in this seven piece set are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Contents. 1.6 mm (1/16in) Drill.2.4 mm (3/32in) Drill.3.2 mm (1/8in) Drill.4.0 mm (5/32in) Drill.4.8 mm (3/16in) Drill.5.6 mm (7/32in) Drill.6.3 mm (1/4in) Drill.With collets.
The Faithfull Vitrified grinding wheels are suitable for use on most types of bench grinder. White wheels are ideal for the general purpose grinding of ferrous metals but they are particularly suited for the sharpening of cutting tools such as chisels and plane irons. These wheels help keep your tools cooler to avoid overheating and weakening the cutting edge. Supplied with bore reducing bushes and will fit bench grindersThe Faithfull FAIGW20025WG is a 200mm x 25mm vitrified grinding wheel suitable for use on most types of bench grinders. The general purpose grinding wheel can also be used for normal grinding of ferrous metals.The Faithfull FAIGW20025WG is supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:31.75mm19.05mm15.88mm12.77mm
Keyless chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use, this chuck can be operated by hand for fast bit changes. The all steel construction provides a long working life making this chuck ideal for use on professional hammer drills. The chuck also features a non-slip locking system for impact drilling and holesaw applications1/2in x 20 UNF thread.Heavy-duty all steel constructionJaw locking system for hammer use
These Faithfull vitrified grinding wheels are suitable for use on most types of bench grinders. For tungsten carbide and non ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes: 31.75mm 19.05mm 15.88mm 12.77mm
This Evolution Short Broaching Cutter Kit is supplied in a handy plastic sotrage case. Contains: 6 x Long (50mm) Broaching Cutters: 12, 14, 16, 18, 20, 22mm1 x Pilot Pin
The Bosch GFA 18-M Professional FlexiClick Metal Chuck Attachment. Robust full metal design. A 'One-Click' interface ensures a tight fix to the machine at a glance. Compatible with GSR 18 V-FC2.
Faithfull recess cutters are designed for use in conjunction with a Faithfull tungsten carbide tipped circular cutter (FAISDSBOXCUT) to form recesses for electrical back boxes. The cutter box should be used with hammer action only and rotation stop must be engaged. These products are only suitable for small 2kg SDS Plus machines with a ‘Roto Stop’ feature (not suitable for 5kg machines).This square cutter is designed to form single electrical back boxes. Size: 77 x 77mm.
The DEWALT DT70761 Mixed Drill & Bit Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x Extreme Bits: 4 x 75, 5 x 85, 6 x 100(x2), 7 x 100, 8 x 120mm(x2) 21 x HSS-G Drill Bits: 1, 1.5, 2, 2.5, 3, 3.2, 3.3, 3.5, 4, 4.2, 4.5, 4.8, 5, 5.5, 6, 6.5, 7, 7.5, 8, 10, 12mm 5 x 25mm Phillips Bits: PH1, PH2(x3), PH35 x 25mm Pozidriv Bits: PZ1, PZ2(x3), PZ329 x 25mm TORX Bits: T15, T20(x22), T25(x4), T30, T40 1 x 50mm Phillips Bit: PH21 x 50mm Pozidriv Bit: PZ21 x 50mm TORX Bit: T20 1 x Magnetic Bit Holder1 x Magnetic Drive Guide
Metabo 86 Piece Bit Set, made from chrome-vanadium-steel (S2-Quality), and featuring colour ring coding for quick and easy identification. Supplied in a high quality, robust storage box with unique Metabo design. Contains: 14 x HSS TiN Drill Bits: 1.5 (2), 2 (2), 2.5, 3 (2), 3.5, 4, 4.5, 5, 5.5, 6, and 6.5mm. 7 x CT-Masonry Drill Bits: 4, 5, 6 (2), 7, 8 and 10mm. 5 x Wood Drill Bits: 4, 5, 6, 8, and 10mm. 4 x Flat Wood Drill Bits: 12, 16, 20, and 25mm. 7 x 25mm Phillips Bits: PH0, PH1 (2), PH2 (2), and PH3 (2). 7 x 25mm Pozidriv Bits: PZ0, PZ1 (2), PZ2 (2), and PZ3 (2). 5 x 25mm Hex Bits: H3, H4, H5 (2), and H6. 6 x 25mm Slotted Bits: SL3, S4 (2), S6 (2), and S7. 7 x 25mm Torx Bits: TX10, TX15 (2), TX20 (2), TX25 and TX30. 3 x 50mm Phillips Bits: PH1, PH2, and PH3. 3 x 50mm Pozidriv Bits: PZ1, PZ2, and PZ3. 2 x 50mm Pozidriv Bits: TX15 and TX20. 8 x Sockets: 5, 6, 7, 8, 9, 10, 11, and 12mm. 4 x Depth Stops: 3, 5, 8, and 10mm. 1 x Wood Countersink. 1 x Magnetic Bit Holder. 1 x Ø-Gauge. 1 x Hexagon Spanner.
The Faithfull Diamond Wheel Dresser has a high quality ‘T’ bar with a multi-point, large 36G diamond surface. Ideal for obtaining a true flat surface on your grinding wheels. The knurled metal handle gives a positive grip when in use Specification: Face Size: 45 x 12mmLength: 115mm
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 20mm x 31.75mmGrit: 36Bond Hardness: MM/S: 35Max R.P.M: 3,350
The IRWIN Drill Screwdriving Set is supplied in a compact carry case and contains the following: 8 x Metal Drill Bits: 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0mm. 4 x Masonry Drill Bits: 5, 6, 7, 8mm. 5 x Wood Drill Bits: 3.0, 4.0, 5.0, 6.0, 8.0mm. 17 x Screwdriver Bits. 1 x Countersink. 1 x Magnetic Bit Holder.
IRWIN Easy Connect Set for drilling into wood, metal, stone and plastic. Supplied in a tough, durable case. Contains: 3 x Hex Shank Metal Drill Bits: 2, 3, 4mm. 3 x Hex Shank Masonry Drill Bits: 4, 5, 6mm. 2 x Hex Shank Wood Drill Bits: 6, 8mm. 4 x 25mm Phillips Bits: PH1, PH2(x2), PH3.4 x 25mm Pozi Bits: PZ1, PZ2(x2), PZ3.5 x 25mm TORX Bits: T10, T15, T20, T25, T30.4 x 25mm Hex Bits: 3, 4, 5, 6.3 x 25mm Slotted Bits: 4, 5, 6. 3 x 50mm Phillips Bits: PH1, PH2(x2).3 x 50mm Pozi Bits: PZ1, PZ2, PZ3.2 x 50mm Slotted Bits: 4, 6. 1 x Magnetic Bit Holder. 5 x Plastic Wall Plugs 5mm.5 x Screws for Wall Plugs 5mm.
Bosch GTA 6000 Professional Saw Stand for GTS 10 XC Professional Table Saw. Easy to store, quick to set up, and simple to transport for convenient work on the go. It has a lockable folding mechanism for increased safety during use. Specifications: Length of Work Bench: 750mm.Height of Work Bench: 602mm.Dimensions of Folded Table: 735 x 865 x 170mm.
SUPRA precision industrial keyless chucks are specifically designed for high accuracy. A self tightening feature produces significantly higher gripping force to resist tool shank slippage. Taper mount for use on machine tools.
Bosch FSN RA 32 Professional Guide Rail for accurate hole layouts when building furniture. It offers extensive functionality in addition to its standard feature set due to its 32mm hole spacing layout. Delivering precise guidance, constructed from high-quality materials and is perfectly compatible with all related power tools. Complete control during operation is made possible by its easily replaceable, non-slip rubber stripes and splinter protection, resulting in a clean cutting edge. This guide rail is intended for guided cuts and routing in 32mm hole system applications. It is compatible with all Bosch Professional GKS G-model circular saws, all GKT Professional plunge saws, as well as selected GST Professional jigsaws and GOF Professional routers with an adapter.
The HSS drill bits are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the quick chuck. The hex collar is supplied in the sets to enable drills to be removed with two spanners.7 piece drill set.1.5, 2, 2.5, 3, 4, 5 and 6mm.Supplied in a storage tube.
These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.Drill Size. 2.0 mm (5/64in).Screw Size. No.6.
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 25mm x 31.75mmGrit: 36Bond Hardness: MM/S: 35Max R.P.M: 3,350
Faithfull single point diamond grinding wheel dresser that can be used to accurately shape and clean the cutting face of vitrified bench grinder wheels. When used regularly, this tool will maintain the cutting surface of a grinding wheel, helping to ensure that precision cutting tools are honed and sharpened correctly for optimum performance. The dresser is manufactured from a hardened and tempered polished steel handle and fitted with a diamond tip. Regular truing and dressing of vitrified grinding wheels removes worn abrasives and waste materials that have become embedded into the grinding wheel. This restores the cutting face for optimum performance and helps to minimise vibration. Single point diamond dressing tools are suitable for use on most surface, cylindrical and internal grinding applications.Tip: 0.50 Carat Diamond.Suitable for bench grinding wheels of 150mm to 250 mm diameter.
These spring loaded drill bit guides are self centring and are used for accurate drilling of holes for fittings such as hinges to ensure exact alignment. They can be easily dismantled for cleaning and are supplied with a HSS Drill Bit.Drill Size. 2.75 mm (7/64in).Screw Size. No. 8
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 25mm x 31.75mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 3,350
The Faithfull Wheel Dresser has been designed for dressing, truing, sharpening and removing glaze from solid abrasive grinding wheels. Heat treated body with powder coated finish. Cast iron handle ergonomically designed for a comfortable grip. Cutters have star shaped teeth that expose new grains and thus provide a fresh surface on the wheels. Suitable for wheels up to 20in