The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 20mm x 31.75mmGrit: 60Bond Hardness: NM/S: 35Max R.P.M: 3,350
Faithfull recess cutters are designed for use in conjunction with a Faithfull tungsten carbide tipped circular cutter (FAISDSBOXCUT) to form recesses for electrical back boxes. The cutter box should be used with hammer action only and rotation stop must be engaged. These products are only suitable for small 2kg SDS Plus machines with a ‘Roto Stop’ feature (not suitable for 5kg machines).This rectangular cutter is designed to form recesses for double electrical back boxes. Size: 77 x 154mm
The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.The HSS Drill Bits in this seven piece set are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Contents. 1.6 mm (1/16in) Drill.2.4 mm (3/32in) Drill.3.2 mm (1/8in) Drill.4.0 mm (5/32in) Drill.4.8 mm (3/16in) Drill.5.6 mm (7/32in) Drill.6.3 mm (1/4in) Drill.With collets.
A boxed selection of thirty six grinding wheels of assorted sizes and grits with a 1/4inch shank to suit most electrical and cordless drills. They are ideal for sharpening and grinding steel, and the pack contains six each of the following. 77 mm Dia. X 12 mm Fine50 mm Dia X 12 mm Fine37 mm Dia X 24 mm Fine65 mm Dia X 6 mm Coarse50 mm Dia X 6 mm Fine15 mm Dia X 24 mm Coarse SAFETY TIPFaithfull grinding wheels are for use in power or cordless drills only and are not suitable for use in die grinder or high speed air tools.
The Faithfull CHUCKMAX is a SDS Max to SDS Plus Adaptor with a 225mm overall length. It enables the use of SDS Plus shanked drill accessories with an SDS Max machine.
The Faithfull Wheel Dresser has been designed for dressing, truing, sharpening and removing glaze from solid abrasive grinding wheels. Heat treated body with powder coated finish. Cast iron handle ergonomically designed for a comfortable grip. Cutters have star shaped teeth that expose new grains and thus provide a fresh surface on the wheels. Suitable for wheels up to 20in
The Faithfull right angle drill attachment may be used with either a cordless or electric powered drill when drilling or screwdriving where access is restricted. Ideal for use in between joists when running cables or pipe work or for working inside confined spaces such as kitchen cabinets. The drive is fitted with a ball bearing shaft support for a long working life and a 10mm (3/8in) keyless chuck for ease of use. Attaches into any 10mm (3/8in) and larger electric or air drill chuck. Overall dimensionsL150mm x D100m x W60mm
Faithfull recess cutters are designed for use in conjunction with a Faithfull tungsten carbide tipped circular cutter (FAISDSBOXCUT) to form recesses for electrical back boxes. The cutter box should be used with hammer action only and rotation stop must be engaged. These products are only suitable for small 2kg SDS Plus machines with a ‘Roto Stop’ feature (not suitable for 5kg machines).This square cutter is designed to form single electrical back boxes. Size: 77 x 77mm.
This Faithfull SDS Plus Chuck Adaptor allows drill chucks to be used with SDS and SDS Plus machines. It converts SDS to 1/2in - 20UNF. Please note: Drill MUST NOT be used in hammer mode when using this adaptor.
The Faithfull Vitrified grinding wheels are suitable for use on most types of bench grinder. White wheels are ideal for the general purpose grinding of ferrous metals but they are particularly suited for the sharpening of cutting tools such as chisels and plane irons. These wheels help keep your tools cooler to avoid overheating and weakening the cutting edge. Supplied with bore reducing bushes and will fit bench grindersThe Faithfull FAIGW20025WG is a 200mm x 25mm vitrified grinding wheel suitable for use on most types of bench grinders. The general purpose grinding wheel can also be used for normal grinding of ferrous metals.The Faithfull FAIGW20025WG is supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:31.75mm19.05mm15.88mm12.77mm
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 25mm x 31.75mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 3,350
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 25mm x 31.75mmGrit: 60Bond Hardness: NM/S: 35Max R.P.M: 3,350
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 20mm x 31.75mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 3,350
These Faithfull vitrified grinding wheels are suitable for use on most types of bench grinders. For tungsten carbide and non ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes: 31.75mm 19.05mm 15.88mm 12.77mm
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 20mm x 31.75mmGrit: 36Bond Hardness: MM/S: 35Max R.P.M: 3,350
The Faithfull Vitrified grinding wheels are suitable for use on most types of bench grinder. White wheels are ideal for the general purpose grinding of ferrous metals but they are particularly suited for the sharpening of cutting tools such as chisels and plane irons. These wheels help keep your tools cooler to avoid overheating and weakening the cutting edge. Supplied with bore reducing bushes and will fit bench grindersThe Faithfull FAIGW15020WG is a 150mm x 20mm wheel and is supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:31.75mm19.05mm15.88mm12.77mm
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 150mm x 20mm x 31.75mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 4,500
These Faithfull vitrified grinding wheels are suitable for use on most types of bench grinders. For tungsten carbide and non ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes: 31.75mm 19.05mm 15.88mm 12.77mm
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 150mm x 20mm x 31.75mmGrit: 60Bond Hardness: NM/S: 35Max R.P.M: 4,500
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 150mm x 16mm x 19.05mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 4,500
These Faithfull vitrified grinding wheels are suitable for use on most types of bench grinders. For tungsten carbide and non ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes: 31.75mm 19.05mm 15.88mm 12.77mm
