The Faithfull right angle drill attachment may be used with either a cordless or electric powered drill when drilling or screwdriving where access is restricted. Ideal for use in between joists when running cables or pipe work or for working inside confined spaces such as kitchen cabinets. The drive is fitted with a ball bearing shaft support for a long working life and a 10mm (3/8in) keyless chuck for ease of use. Attaches into any 10mm (3/8in) and larger electric or air drill chuck. Overall dimensionsL150mm x D100m x W60mm
The DEWALT DEWDT7012QZ keyed chuck can be used for corded and cordless drills and has the following specifications:Chuck capacity: 13mm.Fitment: 1/2 inch x 20 unf.
Plug cutter for cutting plugs in Wood. Made from Tool Steel. Can be used in Snappy Quick chucks or directly in a standard chuck.For cutting 3/8 inch (9.5mm) Plugs.
The Trend SNAP/HKLC/6 Keyless Chuck can be used in quick chucks and impact drivers to hold parallel shank drills bits up to 1/4 inch. Clamping capacity: 0.8 mm (1/32 inch) to 6 mm (1/4 inch). Enhanced gripping power when compared to traditional key type drill chucks. Lightweight with plastic body. Fitted with Snappy shank 1/4 inch hex shank adaptor. Specification Shank Diameter: 1/4in hex. Clamping Capacity: 0.8-6mm (1/32-/14in).
These Faithfull vitrified grinding wheels are suitable for use on most types of bench grinders. For tungsten carbide and non ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes: 31.75mm 19.05mm 15.88mm 12.77mm
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 20mm x 31.75mmGrit: 60Bond Hardness: NM/S: 35Max R.P.M: 3,350
The Faithfull CHUCKMAX is a SDS Max to SDS Plus Adaptor with a 225mm overall length. It enables the use of SDS Plus shanked drill accessories with an SDS Max machine.
Faithfull heavy-Duty keyed chuck for use on both Rotary and Impact drills. Fitted with an anti-thrust bearing to increase the amount of grip and to prevent slipping when under load. Designed in accordance to DIN 6349The FAICHUCK12 comes complete with key and adaptor for use with SDS and SDS Plus machines.When used with SDS machines, the drill MUST NOT be used in hammer mode1/2in x 20 UNF thread. Capacity 13mmComplete with chuck key.
The Makita 194385-5 Plunge Saw Clamp Set has been designed for use with the Makita SP6000 Plunge Saw. These clamps are mainly used when using the saw in conjunction with a guide rail. They hold the guide rail/material securely in place.
This Faithfull SDS Plus Chuck Adaptor allows drill chucks to be used with SDS and SDS Plus machines. It converts SDS to 1/2in - 20UNF. Please note: Drill MUST NOT be used in hammer mode when using this adaptor.
The snappy HSS Drill Bits are gripped by a spring steel collet into Hex Shaft. The Hex shanks snap into the quick chuck.The HSS Drill Bits in this seven piece set are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the Quick Chuck. Contents. 1.6 mm (1/16in) Drill.2.4 mm (3/32in) Drill.3.2 mm (1/8in) Drill.4.0 mm (5/32in) Drill.4.8 mm (3/16in) Drill.5.6 mm (7/32in) Drill.6.3 mm (1/4in) Drill.With collets.
The Faithfull Vitrified grinding wheels are suitable for use on most types of bench grinder. White wheels are ideal for the general purpose grinding of ferrous metals but they are particularly suited for the sharpening of cutting tools such as chisels and plane irons. These wheels help keep your tools cooler to avoid overheating and weakening the cutting edge. Supplied with bore reducing bushes and will fit bench grindersThe Faithfull FAIGW20025WG is a 200mm x 25mm vitrified grinding wheel suitable for use on most types of bench grinders. The general purpose grinding wheel can also be used for normal grinding of ferrous metals.The Faithfull FAIGW20025WG is supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:31.75mm19.05mm15.88mm12.77mm
Keyless chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use, this chuck can be operated by hand for fast bit changes. The all steel construction provides a long working life making this chuck ideal for use on professional hammer drills. The chuck also features a non-slip locking system for impact drilling and holesaw applications1/2in x 20 UNF thread.Heavy-duty all steel constructionJaw locking system for hammer use
These Faithfull vitrified grinding wheels are suitable for use on most types of bench grinders. For tungsten carbide and non ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes: 31.75mm 19.05mm 15.88mm 12.77mm
This Evolution Short Broaching Cutter Kit is supplied in a handy plastic sotrage case. Contains: 6 x Long (50mm) Broaching Cutters: 12, 14, 16, 18, 20, 22mm1 x Pilot Pin
DEWALT DT20560 Impact Rated PVC Pipe Cutter comes with a 1/4in Hex shank so it fits easily to your Impact Driver. The 360° rotating head offers complete flexibility, regardless of which angle your material is. This attachment uses the power and torque from the impact wrench to easily cut through PVC, PEX and Plastic Conduit pipes. With 100x less effort and 6x faster than using a hand pipe cutting tool. Specification: Max. Cutting Capacity: 50mm.
The Bosch GFA 18-M Professional FlexiClick Metal Chuck Attachment. Robust full metal design. A 'One-Click' interface ensures a tight fix to the machine at a glance. Compatible with GSR 18 V-FC2.
Faithfull recess cutters are designed for use in conjunction with a Faithfull tungsten carbide tipped circular cutter (FAISDSBOXCUT) to form recesses for electrical back boxes. The cutter box should be used with hammer action only and rotation stop must be engaged. These products are only suitable for small 2kg SDS Plus machines with a ‘Roto Stop’ feature (not suitable for 5kg machines).This square cutter is designed to form single electrical back boxes. Size: 77 x 77mm.
The quick release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.Drill Size.3.6mm. (9/64in).Countersink Size. No.12.
The DEWALT DT70761 Mixed Drill & Bit Set is supplied in a TOUGH CASE+, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x Extreme Bits: 4 x 75, 5 x 85, 6 x 100(x2), 7 x 100, 8 x 120mm(x2) 21 x HSS-G Drill Bits: 1, 1.5, 2, 2.5, 3, 3.2, 3.3, 3.5, 4, 4.2, 4.5, 4.8, 5, 5.5, 6, 6.5, 7, 7.5, 8, 10, 12mm 5 x 25mm Phillips Bits: PH1, PH2(x3), PH35 x 25mm Pozidriv Bits: PZ1, PZ2(x3), PZ329 x 25mm TORX Bits: T15, T20(x22), T25(x4), T30, T40 1 x 50mm Phillips Bit: PH21 x 50mm Pozidriv Bit: PZ21 x 50mm TORX Bit: T20 1 x Magnetic Bit Holder1 x Magnetic Drive Guide
Metabo 86 Piece Bit Set, made from chrome-vanadium-steel (S2-Quality), and featuring colour ring coding for quick and easy identification. Supplied in a high quality, robust storage box with unique Metabo design. Contains: 14 x HSS TiN Drill Bits: 1.5 (2), 2 (2), 2.5, 3 (2), 3.5, 4, 4.5, 5, 5.5, 6, and 6.5mm. 7 x CT-Masonry Drill Bits: 4, 5, 6 (2), 7, 8 and 10mm. 5 x Wood Drill Bits: 4, 5, 6, 8, and 10mm. 4 x Flat Wood Drill Bits: 12, 16, 20, and 25mm. 7 x 25mm Phillips Bits: PH0, PH1 (2), PH2 (2), and PH3 (2). 7 x 25mm Pozidriv Bits: PZ0, PZ1 (2), PZ2 (2), and PZ3 (2). 5 x 25mm Hex Bits: H3, H4, H5 (2), and H6. 6 x 25mm Slotted Bits: SL3, S4 (2), S6 (2), and S7. 7 x 25mm Torx Bits: TX10, TX15 (2), TX20 (2), TX25 and TX30. 3 x 50mm Phillips Bits: PH1, PH2, and PH3. 3 x 50mm Pozidriv Bits: PZ1, PZ2, and PZ3. 2 x 50mm Pozidriv Bits: TX15 and TX20. 8 x Sockets: 5, 6, 7, 8, 9, 10, 11, and 12mm. 4 x Depth Stops: 3, 5, 8, and 10mm. 1 x Wood Countersink. 1 x Magnetic Bit Holder. 1 x Ø-Gauge. 1 x Hexagon Spanner.
The Faithfull Diamond Wheel Dresser has a high quality ‘T’ bar with a multi-point, large 36G diamond surface. Ideal for obtaining a true flat surface on your grinding wheels. The knurled metal handle gives a positive grip when in use Specification: Face Size: 45 x 12mmLength: 115mm
The Faithfull aluminium oxide vitrified grinding wheels are suitable for use on most types of bench grinders and are suitable for normal grinding of ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:Wheel Size: 200mm x 20mm x 31.75mmGrit: 36Bond Hardness: MM/S: 35Max R.P.M: 3,350
The IRWIN Drill Screwdriving Set is supplied in a compact carry case and contains the following: 8 x Metal Drill Bits: 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 6.0mm. 4 x Masonry Drill Bits: 5, 6, 7, 8mm. 5 x Wood Drill Bits: 3.0, 4.0, 5.0, 6.0, 8.0mm. 17 x Screwdriver Bits. 1 x Countersink. 1 x Magnetic Bit Holder.
IRWIN Easy Connect Set for drilling into wood, metal, stone and plastic. Supplied in a tough, durable case. Contains: 3 x Hex Shank Metal Drill Bits: 2, 3, 4mm. 3 x Hex Shank Masonry Drill Bits: 4, 5, 6mm. 2 x Hex Shank Wood Drill Bits: 6, 8mm. 4 x 25mm Phillips Bits: PH1, PH2(x2), PH3.4 x 25mm Pozi Bits: PZ1, PZ2(x2), PZ3.5 x 25mm TORX Bits: T10, T15, T20, T25, T30.4 x 25mm Hex Bits: 3, 4, 5, 6.3 x 25mm Slotted Bits: 4, 5, 6. 3 x 50mm Phillips Bits: PH1, PH2(x2).3 x 50mm Pozi Bits: PZ1, PZ2, PZ3.2 x 50mm Slotted Bits: 4, 6. 1 x Magnetic Bit Holder. 5 x Plastic Wall Plugs 5mm.5 x Screws for Wall Plugs 5mm.
The IRWIN Drill Screwdriving Set is supplied in a compact carry case and contains the following: 9 x Metal Drill Bits: 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0, 6.0mm. 4 x Masonry Drill Bits: 5, 6, 7, 8mm. 5 x Wood Drill Bits: 4, 5, 6, 7, 8mm. 30 x Screwdriver Bits. 3 x Nut Drivers: 8, 10, 13mm. 1 x Countersink. 1 x Magnetic Bit Holder.
Evolution Pressurised Water Bottle for effective dust suppression on any job site. With a robust hand pump for quick and easy water pressure plus a 3m anti-kink water hose with universal hose connector. The large hand pump can be used while wearing gloves and can also be locked down to double up as a carry handle for portability. Its large capacity means less filling and more cutting. An essential accessory to conform to dust suppression regulations. Specification Capacity: 15 litreHose Length: 3mWeight (Empty/Full) 2.5/17.6kg
