BT13 Series 18 gauge brown Brad nails for use with the Bostitch brad nailer. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 19mm.Colour : Brown.Pack : Clam pack of 1000.
The DEWALT 16 Gauge Galvanised 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailer, ensuring fewer jamming or fitment issues. DEWALT nails are made from inspected high quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining.These DEWALT DNBA1644GZ 16 Gauge 20° Finish Nails have the following specification: Length: 44mm.Type: 20° Angled Nails.Finish: Galvanised.Gauge: 1.6 (16GA).Box Quantity: 2500.
These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and flooring contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins.1 x Pack of 5000 DEWALT DSTSX12Z 18G Galvanised Staples 12mm
These 23 gauge mini pins are headless fine wire pins that are indispensible for fine molding and trim work. As the pins are completely headless , the wood closes over them after driving eliminating the need for time consuming fillingThey are also excellent for temporary tacking whilst glue dries, as they can be removed with little damage to the work.For use with the Bostitch headless pinner.Length: 30mmSKU: 106300SE Finish: STANOX (Copperwash)Description: Mini Pin 30mm StanoxQty per box: 10000 Suits: TU216-2330 Tacker
High carbon Zinc Dichromate HCFN finish nail 15 gauge. For use with Bostitch concrete block nailer.20mmGauge/Diameter (mm) 15 GA Box 3000High Carbon Zinc Dichromate Suits: SB-HC50FN
These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and flooring contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins.1 x Pack of 5000 DEWALT DSTSX30Z 18G Galvanised Staples 30mm
Senco DuraSpin® Collated Decking screws with a green Weatherex coating. Square No.2 drive, coarse thread. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Decking Screws with Weatherex coating. Size: 4.2 x 65mm.
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 35 SKU BT13350GA Finish GALV Description MINIBRADS 35 GALVA 5M Qty per box 5000
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 30 SKU BT1330GA Finish GALV Description MINIBRADS 30 GALVA 5M Qty per box 5000
Senco DuraSpin® Collated Screws for Fermacell board to wood applications. Phillips No.2 drive, black phosphate finish, coarse thread, small head with countersink nibs. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines. Size: 3.9 x 30mm.
Bostitch FAC Series Flat Angle Coil Pattern Ring Coil Nails are designed for high volume operation. The coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them used in the pallet and crate, fencing, garden furniture and the construction industries. To Suit: N71C-1-E, N75C-2-E, N80CB-1ML, N89C-1P-E, N89C-2K-E All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation Angle Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Finish: Bright.Size: 3.1 x 75mm.Boz quantity: 5,400.
Senco DuraSpin® Collated Screws for Drywall to Wood applications. Phillips No.2 drive, black phosphate finish, coarse thread, bugle head. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Screws for Drywall to Wood. Size: 3.9 x 45mm.
Senco DuraSpin® Self-Drill Collated Screws for drywall to light steel applications. Phillips No.2 drive, phosphate zinc finish, fine-thread. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Screws for Drywall to Light Steel. Size: 3.9 x 35mm.
Senco DuraSpin® Collated screws for Drywall to Heavy Steel applications. Phillips No.2 drive, clear zinc finish, fine-thread. 50 screws per strip. CE-marked (EN14592). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Screws for Drywall to Heavy Steel. Size: 3.5 x 25mm.
Senco DuraSpin® Self-Drill Collated Screws for drywall to light steel applications. Phillips No.2 drive, phosphate zinc finish, fine-thread. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Screws for Drywall to Light Steel. Size: 3.9 x 25mm.
These DEWALT 9G G12 Galvanised Staples are designed to be used with the DCFS950 Fencing Stapler. G12 galvanised for outdoor durability.Pack of 960 DEWALT DFS9200B1G 9G G12 Galvanised Staples 50mm
