Senco 34° angled collated brad nails with a sharp chisel point, smooth shank, D-head and Galvanised finish.Senco Chisel Smooth Brad Nails Galvanised Size: 15G x 64mm.
The DEWALT 16 Gauge Stainless Steel 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailer, ensuring fewer jamming or fitment issues. Manufactured from high quality stainless steel for a high resistance to rust. DEWALT nails are made from inspected high quality steel to ensure reliability in performance.These DEWALT DNBA1638SZ 16 Gauge 20° Finish Nails have the following specification: Length: 38mm.Type: 20° Angled Nails.Finish: Stainless Steel.Gauge: 1.6 (16GA).Box Quantity: 2500.
Senco DuraSpin® Collated Screws for Drywall to Wood applications. Phillips No.2 drive, black phosphate finish, coarse thread, bugle head. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Screws for Drywall to Wood. Size: 3.9 x 45mm.
Senco 34° angled collated brad nails with a sharp chisel point, smooth shank, D-head and Galvanised finish.Senco Chisel Smooth Brad Nails Galvanised Size: 15G x 44mm.
These 23 gauge mini pins are headless fine wire pins that are indispensible for fine molding and trim work. As the pins are completely headless , the wood closes over them after driving eliminating the need for time consuming fillingThey are also excellent for temporary tacking whilst glue dries, as they can be removed with little damage to the work.For use with the Bostitch headless pinner.Length 12 SKU 1061200SE Finish STANOX (Copperwash)Description Mini Pin 12mm Stanox 20m Qty per box 20000 Suits: TU216-2330 Tacker
Bostitch Stanox staples are also known as 84 series. For use with TU-216-84-E or other tools using 84 gauge.Wire gauge 0.5 mm x 1mm, 12.3mm crown staple with 14mm leg length.
The DEWALT 16 Gauge Galvanised 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailer, ensuring fewer jamming or fitment issues. DEWALT nails are made from inspected high quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining.These DEWALT DNBA1632GZ 16 Gauge 20° Finish Nails have the following specification: Length: 32mm.Type: 20° Angled Nails.Finish: Galvanised.Gauge: 1.6 (16GA).Box Quantity: 2500.
The DEWALT 16 Gauge Galvanised 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailer, ensuring fewer jamming or fitment issues. DEWALT nails are made from inspected high quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining.These DEWALT DNBA1663GZ 16 Gauge 20° Finish Nails have the following specification: Length: 63mm.Type: 20° Angled Nails.Finish: Galvanised.Gauge: 1.6 (16GA).Box Quantity: 2500.
These 23 gauge mini pins are headless fine wire pins that are indispensible for fine molding and trim work. As the pins are completely headless , the wood closes over them after driving eliminating the need for time consuming fillingThey are also excellent for temporary tacking whilst glue dries, as they can be removed with little damage to the work.For use with the Bostitch headless pinner.Length 18 SKU 1061800SE Finish STANOX (Copperwash)Description Mini Pin 18mm Stanox 20m Qty per box 20000 Suits: TU216-2330 Tacker
Senco DuraSpin® Self-Drill Collated Screws for drywall to light steel applications. Phillips No.2 drive, phosphate zinc finish, fine-thread. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Screws for Drywall to Light Steel. Size: 3.9 x 35mm.
These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and flooring contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins.1 x Pack of 5000 DEWALT DSTSX15Z 18G Galvanised Staples 15mm
These DEWALT 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Available in packs of 2500 and 5000.1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 50mm
Senco 34° angled collated brad nails with a sharp chisel point, smooth shank, D-head and Galvanised finish.Senco Chisel Smooth Brad Nails Galvanised Size: 15G x 32mm.
Bostitch Stanox staples are also known as 84 series. For use with TU-216-84-E or other tools using 84 gauge.Wire gauge 0.5 mm x 1mm, 12.3 mm crown staple with 12 mm leg length.
Packs of 2000 Round head nails. These plastic collated stick nails traditionally have a full round head, while only giving marginally better holding power to clipped head nails, they are preferred by the construction industry. Collation is angled at 21° to accommodate the overlapping heads. Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 2.8 Length 50 21° Collation AngleProfile RING Finish BRIGHT Description RH STICK 2.80-50 RING 2M Qty per box 2000 Will Fit F21PL-E, N79RH-2
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 50 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers.Length : 50 mm.Pack : Box of 2500.
Finish nails and brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank, ensuring that their holding power is enhanced. Applications include partition walls, shop and bar fitting, light framing and timber construction and most second fit applications. For use with N62FN-1, N62FNB-E & N62FNK-2 models. Note: This nail will also fit the N60FN and the N59FNK models. Applications - Partition walls, shop and bar fitting, light framing and timber construction and most second fit applications. 25° collation angleType - 15 gauge angled finish nail.Finish - Galvanised.Length - 57mm.QTY - Box 3655.
These 23 gauge mini pins are headless fine wire pins that are indispensible for fine molding and trim work. As the pins are completely headless , the wood closes over them after driving eliminating the need for time consuming fillingThey are also excellent for temporary tacking whilst glue dries, as they can be removed with little damage to the work.For use with the Bostitch headless pinner.Length: 30mmSKU: 106300SE Finish: STANOX (Copperwash)Description: Mini Pin 30mm StanoxQty per box: 10000 Suits: TU216-2330 Tacker
Senco DuraSpin® Self-Drill Collated Screws for drywall to light steel applications. Phillips No.2 drive, phosphate zinc finish, fine-thread. 50 screws per strip. CE-marked (EN145566). Suitable for both cordless and mains operated machines.Senco DuraSpin® Collated Screws for Drywall to Light Steel. Size: 3.9 x 25mm.
These DEWALT narrow crown galvanised staples are compatible with the DEWALT DCN681 and DCN682 plus other brand SX staplers. Suitable for woodworkers, carpenters, cabinet shops, shop fitting and flooring contractors, upholsters, landscapers and builders. A staple crown has more surface area, sinks solidly and resists shoot-through. Two legs give superior holding power over pins.1 x Pack of 5000 DEWALT DSTSX35Z 18G Galvanised Staples 35mm
Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries. All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation angle Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. For use with: N57C-1CE heavy-duty Coil Nailer N58C-1-E Coil Nailer N58C-1-E Coil Nailer N66C-2-E Coil NailerNail Finish: Bright.Size: 2.1 x 25mm.Box quantity: 31,500.
These DEWALT 9G G12 Galvanised Staples are designed to be used with the DCFS950 Fencing Stapler. G12 galvanised for outdoor durability.Pack of 960 DEWALT DFS9200B1G 9G G12 Galvanised Staples 50mm
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Brad nails for Bostitch models BT200K-2 and SB1850BN nailers. Both 15 to 50 mm maximum. Gauge/Diameter (mm) 18 GA Length 40 SKU BT1340GA Finish GALV Description MINIBRADS 40 GALVA 5M Qty per box 5000
The DEWALT 16 Gauge Stainless Steel 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailer, ensuring fewer jamming or fitment issues. Manufactured from high quality stainless steel for a high resistance to rust. DEWALT nails are made from inspected high quality steel to ensure reliability in performance.These DEWALT DNBA1650SZ 16 Gauge 20° Finish Nails have the following specification: Length: 50mm.Type: 20° Angled Nails.Finish: Stainless Steel.Gauge: 1.6 (16GA).Box Quantity: 2500.
Finish nails and brads have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank, ensuring that their holding power is enhanced. Applications include partition walls, shop and bar fitting, light framing and timber construction and most second fit applications. For use with N62FN-1, N62FNB-E & N62FNK-2 models. Note: This nail will also fit the N60FN and the N59FNK models. Applications - Partition walls, shop and bar fitting, light framing and timber construction and most second fit applications. 25° collation angleType - 15 gauge angled finish nailFinish - GalvanisedLength - 38mmQTY - Box 3655
BT Series galvanised 18 gauge Brad fasteners for use with the Bostitch Finish Bradders. Joined with an adhesive coating that holds the brads together. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Gauge/Diameter (mm) 18 GA Length 25 SKU BT1325GA Finish GALV Description MINIBRADS 15 GALVA 5M Qty per box 5000
Bostitch PT-MC Series Fasteners (PT-MC375SP38G) MCN Galvanised nails. This type of collation is ideal in construction environments where work can be kept free of collation debris. Diameter: 3.75mmHead: 7.2mmLength: 38mm Profile: TwistRing shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Finish : GalvanisedGalvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Collation angle: 33° Collation type: PapertapeBox of 4,000 Note: MCN nails are only for use with MCN Tip.
