Senco Finish Pro18 Nailer & Compressor Kit allows the user to just plug in and work, containing all you need to get nailing in minutes. Ideal for applications such as trim, beading, upholstery and mouldings. Comes with: 1 x SENCO Finish Pro 18Mg 18-Gauge Brad Nailer. It has a lightweight magnesium body that is ultra light, and can drive brads from 15-50mm. Has an oil free design, selective trigger, rear exhaust, and rotating belt hook. Reg. Operating Pressure: 4.8-8.3 bar. Air Consumption: 2.4 scfm.Air Inlet: 1/4in NPT.Weight: 1.12kg. 1 x SENCO PC1010 3-litre Compressor 1HP. PC1010 is a compact, ultra-quiet, portable compressor, with a 1HP motor and a 3 litre aluminium tank. Offering portable pneumatic power for a wide-range of applications, including 2nd-fix joinery, upholstery, sheathing, pipe-testing, beading and trim. Air Displacement: 34 Litres/min.Max Air Pressure: 8 bar.Weight: 9.1kg. Together with these you also get a 1/4in recoil hose, all necessary air fittings, safety glasses, manuals, and a variety pack of 18 gauge brad nails. All kit contents come with a 1 Year Warranty.FinishPro18 Nailer & Compressor Kit 1Hp 110 Volt Version
The DEWALT DCN660 XR Brushless Second Fix Nailer with brushless motor technology, offering runtime that cannot be beaten in a compact package. It has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. The mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. For safety the nailer has a trigger and contact trip lock-off and prevents accidental dis-charge of fastener. The tool free stall/jam clearance minimises down time. DCN660P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCN660D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN660N: Bare Unit, No Battery or Charger Supplied. Specification Fires 16 Gauge Nails 32-63mm, Diameter: 1.6mmMagazine Angle: 20°.Magazine Capacity: 110 Nails.Magazine Loading: Rear Load.Trigger Type: Bump & Sequential.Size (LxWxH): 310 x 95 x 305mm.Temperature Range: -20 to 50°C.Weight: 2.7kg.The DEWALT DCN660P2 XR Brushless Second Fix Nailer 18 Volt comes with: 2 x 18 Volt 5.0Ah Li-Ion Batteries. 1 x Multi-Voltage XR Li-Ion Charger.1 x Heavy-Duty Carrying Case.
The high capacity N66C-2-E coil nailer is designed with a tough, resilient housing but uses light weight materials, making this tool ideal for all day use. The fastener depth adjustment gives ultimate control, and the tool is also compatible with both plastic and wire collated nails for maximum flexibility. Specifciation Magazine Capacity: 225 (max).Nail Length: N Series: 32-64mm.Nail Diameter: N Series: 2.03-2.5mm.Nail Head: 4.5mm.Operating Pressure: 70-120 PSI, 4.8-8.3 Bar.Dimensions (LxWxH): 267 x 270 x 118mm.Weight: 1.99kg.
The DEWALT DCN680 Brushless XR 18 Gauge Brad Nailer has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use but durable enough for the work site environment. Mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Fitted with a brushless motor that offers increased runtime and durability. Trigger and contact trip lock-off prevent accidental discharge of fastener. With tool free stall/jam clearance to minimise down time. The depth of drive can be easily adjusted using the thumb wheel depth adjuster. Two modes of operation: Sequential mode allows for precision placement, Bump operating mode provides the user with production speed of up to 4 nails per second. DCN680D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN680N: Bare Unit, No Battery or Charger. Specification Magazine Capacity: 110.Fires: Nails: Length: 15-54mm. Diameter: 1.25mm.Nailer Operating Mode: Bump & Sequential.Magazine Angle: 0°.Weight: 2.4kg.The DEWALT DCN680N Brushless XR 18 Gauge Brad Nailer is supplied as a Bare Unit, NO battery or charger.
The Senco SFW05-C Pneumatic Semi Pro Fine Wire Stapler delivers excellent performance for a variety of fine wire stapling applications. With a robust all-metal cylinder and ergonomic design , this tool works all day, every day and won't snag or scuff fabric, giving you increased productivity with less downtime. It drives staples with a crown width of 9.5mm and in lengths from 6mm-16mm. Ideal for upholstery, furniture assembly, cabinets, vinyl, interior trim and beading. Comes with a 1 Year Warranty. Requires a 1/4in tailpiece. Specification: Magazine Capacity: 100Fires: Staples: 6-16mmOperating Pressure : 5.2-6.9 barAir Consumption : 27 l/min.Actuation: Trigger FireDimensions (LxWxH): 229 x 45 x 163mmWeight: 0.9kg
The Bostitch MCN150-E Strap Shot Metal Connecting Nailer is incredibly lightweight and simple to use and maintain. Compact metal connecting nailer with Sequential Trip Trigger, adjustable exhaust. It is designed to allow access to even the tightest corners, and the innovative exposed-tip design positions the fastener directly into the connector plates holes for faster and more accurate positioning than ever before. The award winning StrapShot MCN150-E is the most advanced pneumatic positive placement nailer on the market. The compact StrapShot is designed to work where other nailerscan't, allowing access to even the tightest corners, and the innovative exposed-tip design positions the fastener directly into the connector plates holes for faster and more accurate positioning than ever before. Ideal for Joist Hangers, roof trusses, metal connectors and other manufacturing uses. This nail gun uses the 3.75 x 38 mm PT MCN Galvanised Nails. Specification Magazine Capacity: 29 (max).Nail Head: 7.2mm.Nail Length: 38mm. Nail Diameter: 3.3-3.8mm.Operating Pressure: 70-120 PSI, 4.1-8.4 Bar.Air Consumption Per Shot: 5.6 bar 1.9 Litre.Weight: 1.95kg.
The Rapid Airtac PS141 is one of the Pro range of pneumatic staplers, compact and lightweight ideal for DIY and the professional user. Easy to use, applications include upholstery, padding and all kinds of fabric fixing. It has a long nose for precise work with a no-mar pad to protect surfaces and a flat front for easy access in difficult areas. The 360° adjustable air-system ensures you never get exhaust-air in your face. The quick load magazine system ensures you can reload consumables quickly and easily when needed. It is a lightweight, long lasting die cast aluminium stapler with a grip-friendly handle for best comfort. It comes in a hard plastic case including oil pot, hex wrenches, safety glasses and 300 No 12. staples with a 10mm leg length. There is no limitation in fire rate and all are covered by a 2 year guarantee. Compatible with Rapid No. 12 staples 6-16mm. Specification Trigger Type: Contact Actuation Trigger.Operating Pressure: 5-7 Bar.Air Consumption: 0.26 – 0.29 Litre.Fires: Rapid No. 12 Staples 6-16mm.Fastener Capacity: 150 staples.Nose Length: 22mm.Nailing Distance: To Wall: 14mm.
Bostitch CPACK30 is a fully assembled air line hose on a swivelling hose reel, supplied with 6.3mm FPT (female pipe thread) plug and a 6.3mm FPT (female pipe thread) socket. Length: 12.5mm hose x 30 metres.PS Max: 15 Bar, 214psi.
Bahco BP825 Reversible Air Drill has a composit housing and rubber grip handle for optimal user comfort. Also has a removable, adjustable second handle. The forward/reverse lever allows for a quick and easy change of direction. The air exhaust in the handle allows for a clean and pleasent operation. Also has a quick chuck, to allow for quick bit changes. Air inlet BSP: 1/4in.Chuck Size: 13mm.Speed: 450rpm.Air consumption at free speed: 105l/min.Recommended hose size: 10mm.Weight: 1.35kg. Sound pressure level: 88 dBA.Vibration level: 2.5m/s.
The Bostitch 21684B-E wide crown stapler is a professional grade headless pinner with a small compact design for better access to the workspace, variable power control and a secondary safety trigger. Suitable for furniture manufacture, ideal for moulding and trim work. Weight 0.83 kg Dimensions: Length 221 mm × Width 150 mm × Height 40 mm Staple Length 4 mm (min) - 16 mm (max) Diameter 0.5 mm (min) - 1 mm (max) Magazine Capacity 125 (max) Operating Pressure PSI 80 - 120 BAR 4.9 - 8.4 Air Consumption Ltr.per shot @ 5.6 bar 0.17 Noise LPA 1sd 64.4 LWA 1sd 74.0 LPA 1s, 1m 61.0 Vibration m/s2
The Bostitch F33PTSM-E framing nailer features a short magazine for ease of use in tight spaces and has a Dial a Depth function. The paper tape nails are compatible with pazlode (IM350) framer. The powerful engine is capable of driving stick nails upto 90mm in length, whilst the lightweight magnesium body makes it comfortable to use all day long. It has CE compliant sequential trip fitted, for safer working on-site, a No-mar tip to prevent wood bruising and an adjustable exhaust to direct air away from workpiece and operator. Ideal for: Cases, Roof Trusses, Stud Walls and Timber Framing. Uses PT Fastner range. Specification Magazine Capacity: 50 (max).Nail Length: PT Series/WW 33º Series: 50-90mm Nails.Nail Diameter: PT Series/WW 33º Series: 2.5-3.3mm.Operating Pressure: 70-120 PSI, 4.8-8.3 Bar.Collation Angle: 33°.Weight: 3.5kg.
The Bostitch CPACK15 Combo Pack comes with everything you need to hook a Bostitch Pneumatic tool to a compressor. Contains: 1 x 15.5mm x 15m Air Hose.1 x Pipe Thread Seal Tape.1 x Bottle of Pneumatic Tool Oil.1 x 6.3mm Female Pipe Thread Plug (FPT)1 x 6.3mm Male Pipe Thread Plug (MPT)1 x 6.3mm Female Pipe Thread Socket (FPT)1 x 6.3mm Male Pipe Thread Socket (MPT)1 x Blow Gun. Max Operating Pressure: 150 PSI, 10.5 Bar.
This latest evolution of the best selling N88WW framer brings even more power to job with a 5% increase in driving power together with a weight reduction. The waisted body design gives a much improved sightline to the tool nose. The handle has been lowered to improve balance and comfort in use; along with other design improvements these features will keep this tool firmly at no 1 in the pneumatic framing market. Its use of 28 degree wire collated nails keeps consumable costs to a minimum. Use for all your framing and first fix applications. Specification Magazine Capacity: 90 (max).Nail Range: 50-90mm First Fix NailsOperating Pressure: 70-120 PSI, 4.8-8.3 Bar.Driving Power: 1050 inch/lbs.Weight: 3.5kg.
Senco SC65 Pneumatic Semi Pro Coil Nailer offers rapid nailing in a whole range of applications. It has an ergonomic magnesium housing designed with comfortable rubber grip for great working experience, and the multi-directional exhaust deflector deflects air away from operator for comfort. A no-mark pad protects the work surface and the restrictive trigger ensures precise operating, as does the depth of drive adjustment. The high capacity, easy to load magazine and quick clear jam release ensure downtime is kept to a minimum. The tool drives 15° collated wire and plastic collated coil nails from 32mm to 65mm in length, and 2.3 to 2.9mm diameter. Ideal for wall sheathing/siding, timber frame construction, fencing , sub-flooring, boarding and other wooden assembly work . Comes with a 1 Year Warranty. Requires: 1/4in tailpiece.Operating Pressure: 4.9-8.3 bar.Air Consumption: 220 l/min.Magazine capacity: 250-275.Collation angle: 15°.Fastener length: 32-65mm.Length: 304mm.Width: 128mm.Height: 300mm.Weight: 2.49kg.
The Tacwise DGN50V Pneumatic Brad Nailer fires 18 gauge brad nails 20-50mm in length. Accurate and reliable, it features an adjustable depth control and quick release nose gate. Ideal for furniture, exhibitions, window beading and moulding, picture and mirror frames, door frames and many more applications. Specification Magazine Cpacity: 100 Brads.Staple Type: 18G & 180 20-50mm.Operating Pressure: 60-100 PSI, 86 dBA.Weight: 1.2kg.
Senco PC1010 is a compact, ultra-quiet, portable compressor, with a 0.5HP motor and a 3 litre aluminium tank. Offering portable pneumatic power for a wide-range of applications, including 2nd-fix joinery, upholstery, sheathing, pipe-testing, beading and trim. With its low-noise oil-less motor it is even ideal in domestic situations. Comes with a comfort grip handle, and is designed not to roll about in the back of the van. The SENCO PC1010 comes in either 110v or 230v. Comes with a 1 Year Warranty. Specification Air Displacement: 34 Litres/min.Max. Air Pressure: 8 barHorsepower: 0.5hpSCFM: 90 psi: 0.7Pump Up-Time: 0-120 psi: 128 secondsRecovery Time: 90-120 psi: 35 secondsMax. Pressure: 125 psiTank Capacity: 3.8 LitresWeight: 9.1kgSenco PC1010 Compressor 0.5 HP 230 Volt Version.
The Porta-Nails Angled Nailer has a lightweight, durable design. To guarantee that the nails are set properly each time, the ratcheting ram allows for single or multi-hits. The multi-hit function helps to minimise fatigue whilst providing greater impact. Interchangeable shoe attachments (not included) provide multiple flooring options. The nailer is supplied with:Extension handle.Mallet.Angled shoe for 5/8in - 33/32in tongue and groove flooring.Wrenches.Rugged carry case. Specification Fastener capacity: 100 x 16 Gauge 'T' Cleats.Operating pressure: Manual.Dimensions: 387 x 457 x 76mm.Weight: 3.63kg.The 40225 Vertical Nailing Shoe is suitable for the 402A Angled Nailer.
The Bostitch SX1838-E stapler has user-friendly features such as dial-a-depth for quick countersinking adjustments and a selectable trigger system. It will make light work of construction stapling applications. This rugged tool drives staples from 15 to 38 mm length and offers extreme reliability and durability, yet with low maintenance due to the oil free design. Comes complete with 1000 fasteners and carry case. Specification Magazine Capacity: 100 (max).Fires: SX Series: 12-38mm and Crowns: 5.6mm.Operating Pressure: 70-120 PSI, 4.8-8.3 Bar.Dimensions (LxWxH): 235 × 240 × 70mm.Weight: 1.34kg.
The Bostitch TU-216-2330K-E Pneumatic Headless Pinner is a compact 23 gauge headless pinner which is specially designed for fine detail work in the construction industry and industrial use. Benefits include a secondary safety trigger to reduce the risk of accidental start, auto adjusting magazine for varying pin lengths together with a rear exhaust to direct air away from the nose piece. Specification Magazine Capacity: 200 (max).Nail Range: 15-30mm.Nail Diameter: 0.6mm.Operating Pressure: 70-100 PSI, 4.8-7 Bar.Dimensions (LxWxH): 230 x 198 x 40mm.Weight: 0.984kg.
The Bostitch F21PL-E Roundhead & MCN Stick Nailer has a waisted body design to improve sightline and a repositioned handle to give balance and comfort in use. Using 21° plastic collated framing nails hot dip galvanized to 50 microns and specially designed positive placement nails. This tool is perfect for all framing and first fix applications where good corrosion resistance is required and of course anywhere you need to drive a nail through a pre formed hole. Comes complete with two noses, enabling a five second change between modes via the push button depth control button. Perfect for all framing and first fix applications. Specification Magazine Capacity: 50 (max).Nail Length: PL Series: 45-90mm, MCN Series: 38-65mm.Nail Diameter: PL Series: 2.5-3.3, MCN Series: 4-4.1mm.Operating Pressure: 70-120 PSI, 5-8.25 Bar.Collation Angle: 21°.Weight: 3.7kg.
The Rapid PRO BN50 Brad Nailer is a powerful, cordless brad nailer for professionals. The ideal solution for 2nd fix carpentry such as fitting skirting board and trim as well as panelling.Powered by an 18V Li-ion battery, so the user avoids complicated gas-driven solutions, noisy, costly, uncomfortable operation and time consuming maintenance and cleaning. The instant trigger response brings efficiency and reduces the work time. Other features include a push-button, fast opening magazine, fly-wheel drive for high power and reliability and two-step sequential firing for safety.Ideal for tough jobs and demanding environments where performance and reliability are vital.Comes with a 2 year guarantee.Specification:Magazine Capacity: 110 (max.)Fires: 18 Gauge Brad Nails, 25-55mmMax. Fire Rate: 60 Shots/Min.Weight: 4kg
The DEWALT DPN1664PP Pneumatic 16 Gauge Finish Nailer is fitted with a Precision Point™ nose that has a unique contact detect system for reduced marking of work surface. 80% nose tip reduction for improved accuracy and visibility. The selectable trigger system provides sequential or contact operation with an easy depth adjust control for precise countersinking of nails. Also fitted with a tool-free jam release mechanism for easy nail removal. Suitable for the following applications: tongue & groove, panelling, cabinet work, door & window sets, skirting and dado rails, staircases and rails. Specification Magazine Capacity: 110 Nails.Operating Pressure: 4.8-8.3 Bar.Nail Length: 25-64mm.Nail Head Diameter: 1.6 x 2.8mm.Trigger Type: Sequential & Bump.Air Consumption Per Actuation: 1.27 Litre.Length: 302mm.Height: 289mm.Width: 86mm.Weight: 1.7kg.
The DEWALT DCN681 Cordless XR Brushless Stapler has a compact, lightweight design that is easy and comfortable to use but durable enough for a worksite environment. It is fitted with a brushless motor for optimum runtime and performance. Uses mechanical rather than gas operation for low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. The depth of drive can be easily adjusted using the thumb wheel depth adjuster. DCN681D2: 2 x 18 Volt 2.0Ah Li-ion BatteriesDCN681N: Bare Unit, No Battery or Charger Specifcation: Nail Length: 12-38mm.Nail Diameter: 1.25mm (18Ga).Magazine Capacity: 110 Nails.Magazine Angle: 0°.Weight: 2.6kg.The DEWALT DCN681N XR Brushless 18G Narrow Crown Stapler is supplied as a bare unit, no battery or charger.
