Bondloc B270 Studlock is a permanent green coloured general-purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1in, sealing against leakage and corrosion. It is chemical-resistant, resisting fuels, lubricants and most industrial liquids and gases. It eliminates double nutting and/or welding of critical assemblies. It also permits reduced casting thickness and ultimate lightness, reduced assembly stress and eliminates cracked castings due to interference fit stresses. Specifications: Resin: DimethacrylateColour: GreenFixture Speed No Activator: 10 min.Fixture Speed With Activator: 5 min. Viscosity: 500 cpsGap fill: 0.25mmFlash Point: >100°CShelf Life: minimum 12 monthSpecific Gravity: 1.06.Max Operating Temperature: -55°C to +180°C Cured Performance: Full Cure Time: 12 hours.Cure Time with good % of final strength: 2 hoursTypical Breakaway Strength DIN : 40 Nm (25/55)Typical Prevailing Strength DIN : 55 Nm (45/70)Typical Breakaway ISO 10964: 26 Nm (16/36)Typical Prevailing ISO 10964: 36 Nm (22/50)Bondloc Studlock High Strength Threadlocker Size: 50ml.
Bondloc B243 is an Anaerobic formulation designed to be used on parts in an as received condition, such as those with protective films (oils) etc. Oil tolerant B243 is designed for direct application onto as received parts where a light oily film exists or where surrounding parts contamination is a problem in maintenance. Specifications: Resin: Mod MethacrylateColour: Blue ThixotropicCure speed: <15 mins @ 20°CViscosity: 1200-1800 thixotropicGap fill: 0.1mmFlash Point: >85°CShelf life: 12 months @ 20°CSpecific gravity: 1.04Max. Operating Temperature: -53°C to + 150°C Cured Performance: Full Cure Time: 24 hoursTypical Breakaway Strength: 12 N/mm²Typical Prevailing Strength: 8-10N/mm²Bondloc Nutlock Medium Strength Threadlocker Size: 10ml.
The Rapid Automotive Rivets are supplied in 4 different colours to match the licence number plates on cars, vans, trailers and motorbikes. They are made from high grade aluminium to ensure a secure fix. Each pack contains 32 coloured rivets (8 each of blue, yellow, black and white) and a drill bit. Suitable for use with the RP10, RP40, RP60 and RP100 riveters.Specifications:Size: 4.8 x 16mm.Grip range: 9-12mm.Pack: Blister of 32.
Monument automatic pipe cutter is ideal for cutting copper pipe in confined spaces. A tough ABS housing covers the steel mechanism which takes any strain. Easy to use it cuts once the gate of the tool is closed over the pipe. Cuts in two directions. To ensure long life, occasionally dis-assemble the tool and clean away flux residues and other dirt. NOT for use on stainless steel. Replacement Wheel Number MONW15PC.Monument Automatic Copper Pipe Cutter. Size: 15 mm. Ratchet handle available (Code:- MON15R.)
Rustins Quick-Drying All Surface All Purpose (ASAP) Paint is a water based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. ASAP has a low odour and does not require any priming. It is suitable for use on wood, metal, plastic, galvanised steel, uPVC, lead, glass, tiles, plaster, mdf, masonry and melamine.This Rustins ASAP Paint has the following specification: Colour: White.Size: 500ml.
Rustins Quick-Drying All Surface All Purpose (ASAP) Paint is a water based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. ASAP has a low odour and does not require any priming. It is suitable for use on wood, metal, plastic, galvanised steel, uPVC, lead, glass, tiles, plaster, mdf, masonry and melamine.This Rustins ASAP Paint has the following specifications: Colour: Grey.Size: 500ml.
The DEWALT Apprentice Hiker Boots have nubuck and full grain leather uppers which are hard-wearing with antibacterial insole with dual density seat. They are fitted with a steel toecap that has been tested to 200 joules. The sole is chemical and oil resistant and is made from EVA rubber. Available in Wheat or Brown. EN Test: CE EN ISO 20345-2011.Safety Rating: SB.Slip Rating: SRA.The DEWALT Apprentice Nubuck Hiker Boots have the following specification: Colour: Brown.Size: UK 12 Euro 46.
Faithfull Anti-Slip Tape provides a safe, slip-resistant surface on stair treads, walkways and ramps. Long-lasting abrasive particles are adhered to a self-adhesive waterproof PVC backing. It is suitable for marine, industrial and domestic use.This Faithfull Anti-Slip Tape has the following specification: Colour: Black/YellowWidth: 50mmLength: 5m
Do you have problem steps, decking areas or pathways around the house where people can lose their footing? Areas like these can be particularly dangerous for the elderly, disabled or children, leading to serious injuries in some cases, if no action is taken. Self-adhesive, easily applied, can be used indoors or outdoors.Quick and cost effective.Can be applied to a multitude of surfaces.Available in black/yellow or clear. RECOMMENDED USES: Steps, patios, garage floors, decking areas, emergency staircases, apartment staircases and access ramps.Size 50mm x 18mColour: Black.
Do you have problem steps, decking areas or pathways around the house where people can lose their footing? Areas like these can be particularly dangerous for the elderly, disabled or children, leading to serious injuries in some cases, if no action is taken. - Self-adhesive, easily applied, can be used indoors or outdoors- Quick and cost effective- Can be applied to a multitude of surfaces- Available in black, yellow or clear
ROCOL ANTI-SEIZE Compound is copper based, lead free formulation, and used to prevent seizure and galling of all threaded and static fasteners. Lubricates, protects and eases dismantling, effective even in the most aggressive environments, insoluble in water. Ideal for furnaces, exhaust systems, dockside and oil rig applications. Temperature range -10°C to +1,100°C.1 x ROCOL ANTI-SEIZE Compound Tin 500g
Blackfriar Anti-Rust Primer Quick Drying is an all-in-one primer and undercoat that is the perfect preparation for Blackfriar Metal Paint. It’s easy to apply and provides excellent protection against rust, making it ideal for factory maintenance, including plant and machinery, and for use at home on your car, bicycles, garden furniture, gates, railings and garage doors etc. Application method; brush or roller. Coverage: 14m²/L/Coat.Touch Dry: 2-4 hours.Hard Dry: 3 days.Recoatable: 16 hours.Blackfriar Anti-Rust Primer Quick Drying Size: 500ml.
Scan Anti-Impact Gloves offer maximum hand protection in a range of environments. They are highly tear and cut resistant whilst providing excellent grip. They have a rubber coated palm for abrasion resistance and a high-grade cut 5 resistant HPPE liner for cut protection. The foam latex pads offer anti-impact metacarpal protection. Ideal for use in construction, mechanical, tools, auto assembly, timber and glass cutting processes. Conform to EN 420 and EN 388 Standards. Abrasion Performance Index (1-4): 3Blade Cut Performance Index (1-5): 5Tear Performance Index (1-4): 4Puncture Performance Index (1-4): 21 x Pair of Scan Anti-Impact Latex Cut 5 Gloves - Extra Large (Size 10)
These Forgefix Annular Ring Shank Nails are ideal for where strength and holding power are of primary importance. The rings on the shank of the nail are sloped in a conical shape to ensure clean insertion but are then extremely difficult to release. They are suitable for both soft and hard wood. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:Used where permanent holding is preferred such as flooring applications.Annular Ring Shank Nail Bright 65mm Bag Weight 500g
Medium flexibility grinder pads are recommended for 60+ finer grits. The unique flexibility and durability make these our best selling pad. This range can be considered for universal use. Made in Great BritainTo suit. 100 mm Mini Grinders.Thread. M10 x 1.50.Abrasive Disc Size 100 mm x 16 mm (4 in)Machine Fitted.New Makita Pin Spanner - Green
Softer flexibility grinder pads are recommended for 80+ finer grits. ISO 15636 quality standard featuring excellence, resilience and high resistance to distortion making them the worlds ultimate. This range is better suited for use on curved surfaces and edges.Made in Great BritainThead size M14 x 2.0
Medium flexibility grinder pads are recommended for 60+ finer grits. The unique flexibility and durability make these our best selling pad. This range can be considered for universal use. Made in Great BritainType. 90-UTo suit. 100 mm Mini Grinders.Thread. 3/8 x 24 UNF. Abrasive Disc Size. 100 mm x 16 mm (4in). Machines Fitted:- Atlas Copco.Cp9110/854E (Later models Desoutter 308, 355, 370, Myton). Pin spanner - Green
Rustins Aluminium Wood Primer is an oil based primer, but contains aluminium pigment which provides better water-resistance. Applied directly to bare wood, it seals the surface and provides adhesion for subsequent coats of paint. Suitable for exterior use.Rustins Aluminium Wood Primer.Size: 500 ml.
This Faithfull Roofing Square is designed to provide carpenters with a quick and accurate way to mark out for many building projects and is widely used when constructing roof rafters. It is manufactured from aluminium and has graduations marked with degree measurements, which helps to simplify material layout and timber cutting. Quick, accurate and able to calculate hips, valleys and angles on roofs making it a truly flexible square.
The Stanley STA005928 Aluminium Pole Utility Sander with a heavy-duty ribbed aluminium body which stays flat and rigid, and with a bi-material handle. Has an efficient clamp design to hold paper or screen firmly in place; accepts most sandpaper and sanding screens.
Set of 2 Master Lock solid aluminium combination padlocks which are a tough and dependable security solution. With a modern design and variety of colours (yellow, pink, blue and green), they are an appealing solution for day-to-day reliability. Each padlock has a solid body and steel shackle. 3-digit resettable, no reset key is needed to change the combination. All Master Lock padlocks are supplied with a Lifetime Warranty against mechanical failure.
The Faithfull All-steel Square Mouth Shovel. Solid manganese steel forged blade and socket correctly tempered for strength. Powder coated for rust prevention. A tubular shaft is welded to the socket for a strong smooth join. The shaft is fitted with a metal YD hilt with a wooden cross dowel for added comfort.Exceeds BS standard by at least 50%. Size: No.2.Blade: 300 x 250mm (12 x 10in).Shaft: 700mm (28in).
The Faithfull Round Mouth Shovel made from manganese steel for strength, and epoxy coated for rust prevention. The solid forged blade and socket are correctly tempered for strength and a tubular shaft is welded to the socket for a strong smooth join. Fitted with an MYD hilt with a wooden cross dowel for added comfort. Size: No.2. Specifications:Manufactured to BS3388: 2004.Tested to Rockwell hardness 42.50HRC.Load tested to 75KG.
The DEFENDER range of Covered Laminated Padlocks provide both security and weather protection. The padlocks use a 5-pin cylinder to provide extra key security, plus a hardened steel shackle, utilising a double locking mechanism, to provide extra resistance to physical attack. The all-weather covering is designed to be provide protection in areas where the elements are particularly aggressive. Ideal for Sheds and Garages. Currently available in 2 sizes to meet most needs, with option to have Keyed Alike suites for extra convenience. Comes complete with 2 keys and a 2 year guarantee.
These Lighthouse high performance Alkaline batteries are designed to offer a high capacity for energy-hungry devices and offer a long storage life of up to five years. Alkaline batteries last longer when used with higher current devices and can, in some cases, out perform Zinc Carbon products by up to six times, they also have less risk of leaking.1 x Pack of 2 Lighthouse Alkaline Batteries C LR14 6200mAh
The Trend AIR STEALTH Half Mask protects the user against airborne particles, oil aerosols, mist, welds and fumes. Fitted with a twin HEPAC pleat encapsulated filter, that provides 99.99% filtration of airborne particles and aerosols at 0.3 micron and above. The exhalation valve is located at the bottom of the face piece, this helps to prevent exhalation fumes steaming or fogging glasses/visors. A protective grill covers 100% of filter surface. Protecting the filter from moisture and particulates, ensuring it performs better in clogging pressure and filtration efficiency. Conforms to half mask standard: BS EN 140Respiratory Protection: BS EN 143 P3(R)Assigned Protection Factor: APF20
The Britool adjustable wrench has a hardened chrome-vanadium steel body and polished chrome faces. The reduced nose thickness allows better access and the round handle design offers better ergonomics. The wrench features right-hand knob rotation and fully tempered and quenched grip. The head of this registered model is tilted at 15° for a 30° deflection angle when flipped. ISO 6787 - DIN 3117.Length: 250mm.Weight: 130g.
These Faithfull basin wrenches have adjustable spring action jaws that maintain an automatic grip on pipe fittings. The forged steel jaws turn 180° for greater flexibility. Essential tool for use on compression fittings, copper or polythene, on basins and baths.1 x Faithfull Adjustable Basin Wrench 6mm - 25mm
The Starrett A2E Arbor is suitable for use with holesaw sizes ranging from 32mm - 210mm diameter. It is fitted with a 6.5mm/1/4 in pilot drill, with set screw in the arbor body allowing easy replacement of the pilot drill. This arbor has This arbor features an extra long pilot drill, suitable for the use with the extended cutting depth of the Fast Cut Multi Purpose Holesaws. Shank Size: 7/16in Hex suitable to fit 1/2in capacity chuck.
The Dormer A190 HSS Jobber Drill Sets features A100 HSS Jobber Drills that are ideal for general machining applications. Supplied in an attractive plastic case. A190 No.18 HSS Drill Set of 29: 1/16 - 1/2in x 64ths.Contains 29 drills. Range of sizes from 1/16th to 1/2in by 64ths,
Dormer A125 HSS Extra Length Drill is a general purpose extra length drill that is ideal for long reach and deep hole applications and capable of drilling up to 10 times its diameter.
A10 Arbor to suit 32mm-210mm Holesaws. Fitted with a 6.5mm/1/4 in pilot drill, with a quick hitch mechanism that enables the user to instantly change holesaws without the use of tools and without removing the arbor from the chuck. Suffix E denotes extra long pilot drill. Shank Size: 8.75mm hex shank suitable to fit a 9.5mm capacity chuck.Complete with 1/4in Pilot Drill - This arbor has a longer pilot drill for use with the Starrett Fast Cutting Holesaws
Dormer A100 Metric HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 5.40mm.Working length: 57mm.Overall length: 93mm.
Dormer A100 series general purpose HSS jobber drills are suitable for use in the majority of general purpose engineering applications. They have good self-centring capability on a wide range of materials and are suitable for both hand and machine use. DIN338RNBS328ISO235Tip diameter: 3/64in.Working length: 16mm.Overall length: 38mm.
Compressed composite wood biscuits for joining. The Faithfull wood biscuits are available in 3 sizes.Also available is a box of 375 assorted biscuits (sizes 0, 10, and 20) which contains a glue bottle and spreader.The Faithfull FAIDOWBIS10 wood biscuits come in a tub of 125, size no. 10. Dimensions: 53mm x 20mm
This Stanley 31 piece set of 1/4in drive bits is supplied in a plastic case and contains: 3 x Phillips Bits: PH1, PH2 & PH33 x Pozi Bits: PZ1, PZ2 & PZ33 x Slotted Bits: 4, 4.5 & 5mm11 x TORX Bits: T10, T15, T20(2), T25(2), T27(2), T30(2) & T405 x TORX Security Bits: T10, T15, T20, T25 & T304 x Hex Bits: 3, 4, 5 & 61 x 1/4in Drive Adaptor Bit1 x 60mm Magnetic Bit Holder
