Stanley Tucson Cargo Shorts are constructed from a durable poly/cotton rip-stop fabric and have a variety of pockets, including easy-entry front and back pockets, a cargo side pocket and a ruler pocket. They have an angled centre back belt loop for ease of threading plus a hammer loop.1 x Pair of Stanley Tucson Cargo Shorts, Charcoal Grey, Waist 36in
Focus High Performance LED Torches are manufactured from anodised aluminium, these torches are lightweight, strong, durable and reliable. Designed for rugged outdoor activities, such as camping, hiking, fishing and similar activities. Each torch is fitted with a high performance LED with three output modes and focus control that provides both a spot and flood function, allowing the light to be adjusted from a tight spot beam to a wide flood light to suit the job in hand. All these great features provide reliability, versatility and long running times.This compact lightweight torch features a 100 lumen output LED with three operating modes of High, Low & Strobe. Focus control allows the light to be adjusted from a tight spot beam to a flood light to suit the job in hand. The torch has a run time of up to three hours and is water and dust proof to IP54. This style of torch is often favoured by service engineers, car mechanics and by the electrical, gas and water industries where information such as meter readings need to be taken in restricted areas. The pen style pocket clip makes it easy to keep in your pocket so that it is always at hand and ready for use. Supplied complete with three AAA cell alkaline batteries. ; 100 Lumen high-performance LED50M beam distanceFocus control 3 output modes High, Low & StrobeUp to 3 hours run timeAnodised aluminium bodyTail-cap switch Pocket clipDust proof and water proof to IP542 x AAA alkaline batteries includedTorch size: 140 x 16/13.5mmWeight: 31g Exc. batteriesOutput: High 100 Lumens Low 30 LumensRun time: High - 1.5 Hours Low - 3 Hours Impact resistant from 1 metre
This Faithfull flexible scraper is ideal for removing soft carpet adhesive residues, paint, silicone joints and for many other scraping applications. Compatible with many multi-function oscillating power tools.
Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in stock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefully Wear goggles to guard against flying chips or dust Inspect the condition of the wheel frequently Adjust the guard to deflect sparks and dust Maintain the revs and let the wheel do the work1 x Faithfull Depressed Centre Metal Grinding Disc 125 x 6.5 x 22.23mm
JG Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread appliance, such as a tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release.
The JG Speedfit x union nut flexi hose is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
An alternative to hard piping to a tap or fixture
Flexible design makes installation hassle free
Safe flame-free installation, with no hot works, glue or flux
Braided stainless steel outer layer protects the internal feed from damage
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (6 Bar @ 65 °C)
The Knipex 08-26 Series Needle Nose Combination Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from high-grade tool steel that has been forged and oil-hardened, multiple times. Chrome plated finish. The jaw features gripping surfaces with a special convex contour on one side for secure gripping of flat parts. A milled groove in the gripping area permits small parts such as nails, pins and bolts to be held and pulled. With cutting edges for soft, medium-hard and hard wire. Fitted with a high leverage joint for easy cutting. Ideal for working in confined areas thanks to their slim head design and pointed jaws (anti-twist).
The Knipex 88 01 Series Alligator® Water Pump Pliers with dipped PVC handles and a box joint design prevents slipping from the workpiece. The gripping surfaces have special hardened teeth to approx. 61 HRC offering high wear resistance and stable gripping. They are made from chrome vanadium electric steel, that has been oil-hardened. They offer more output and comfort compared to conventional water pump pliers of the same length and have a 9-notch adjustment positioning for 30 % more gripping capacity. The slim design of the head and joint area provide good access to the work piece and self-locking on pipes and nuts means no slipping on the work piece and low hand force required. Alligator® water pump pliers have a robust construction, insensitive to dirt. Particularly suitable for outdoor work. The guard prevents operators fingers being pinched. Specification Capacity: 88 01 180: Hex: 36mm, Pipe: 42mm.88 01 250: Hex: 46mm, Pipe: 50mm.88 01 300: Hex: 60mm, Pipe: 70mm.88 01 400: Hex: 95mm, Pipe: 90mm.Knipex 88 01 180 Alligator® Water Pump Pliers PVC Grip Length 180mm (7in).Capacity: 30mm.
ROCOL SAPPHIRE® Premier Lubricating Grease is a high-performance, fully synthetic multipurpose grease, designed for all types of antifriction bearings operating in extreme conditions. Fortified with PTFE. Ideal for high speed applications such as fan and motor bearings, or used as an electrical contact grease. It is compatible with most plastics and rubbers. Temperature range of -50°C to +200°C
A hardened and tempered parallel pin punch, which is used for removing pins in parallel holes. The pin should be first started with a hand or taper punch to avoid damage to the point of the parallel punch.Size 8mm (5/16 in).
The Rapid Airtac PS141 is one of the Pro range of pneumatic staplers, compact and lightweight ideal for DIY and the professional user. Easy to use, applications include upholstery, padding and all kinds of fabric fixing. It has a long nose for precise work with a no-mar pad to protect surfaces and a flat front for easy access in difficult areas. The 360° adjustable air-system ensures you never get exhaust-air in your face. The quick load magazine system ensures you can reload consumables quickly and easily when needed. It is a lightweight, long lasting die cast aluminium stapler with a grip-friendly handle for best comfort. It comes in a hard plastic case including oil pot, hex wrenches, safety glasses and 300 No 12. staples with a 10mm leg length. There is no limitation in fire rate and all are covered by a 2 year guarantee. Compatible with Rapid No. 12 staples 6-16mm. Specification Trigger Type: Contact Actuation Trigger.Operating Pressure: 5-7 Bar.Air Consumption: 0.26 – 0.29 Litre.Fires: Rapid No. 12 Staples 6-16mm.Fastener Capacity: 150 staples.Nose Length: 22mm.Nailing Distance: To Wall: 14mm.
Designed for Tradesmen, this Stanley bevel edged wood chisel has a ground finished, hardened and tempered alloy steel blade, with a one piece, solid impact resistant blue polypropylene plastic handle.The blade is lacquered for rust prevention.Set of 3.Sizes: 12, 18 and 25mm.
The Sievert 8708 Hot Air Burner has been designed for shrinking and paint stripping. It produces a powerful, wind stable hot-air stream. For use with the 253501, 253511 and 253547 Powerjet. Diameter: 38mm.
The Metabo SSW 18 LTX 300 BL Brushless Impact Wrench is a high torque machine with low kickback torque. Automatic Power Shift (APS) supports working with self-tapping screws: automatic torque reduction after drilling to prevent overtightening. The unique Metabo brushless motor provides quick work progress and the highest efficiency for any application. Its robust die-cast aluminium gear housing provides optimum heat dissipation and durability. With 12-speed/torque levels for a wide range of applications. There is also an integrated work light for illumination of the work area and a handy belt hook can be fixed either on the right or left side. Ultra-M technology: highest performance, gentle charging and 3-years of warranty on the battery pack. Bare Unit - No Battery or Charger supplied. Specification: Bit Holder: 1/2in Male SquareNo Load Speed: 0-2,650/min.Impact Rate: 3,750/bpmMax. Torque: 300Nm, 12 SettingsMax. Loosening Torque: 480NmMax. Bolt Diameter: M18
Flexovit hook & loop sanding discs are tough and durable, with heavy paper backing for longer life, are ideal for general purpose sanding and stock removal. The tough and sharp High Performance Aluminium Oxide combined with a heavy paper backing makes this product extremely durable and long lasting. Hook & loop backing allows quick and easy disc changing to fit most brands of electric sanders. Suitable for use on wood, paint and metal. Size: 150mm. 6 holes.Packed in 6s
The Sievert HP Hose Assembly comes supplied complete with a connection nipple. It is suitable for use with Promatic Pro 86 and Pro 88 torch handles.Size 10 metre
Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 52 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 Inch (11.1mm).BAH383411152C 11152 32-210 mm 1/2 Inch (11.1mm).BAH383416152 16152 32-210 mm 5/8 Inch (15.4mm).
Bahco 3802 HSS Power Blade is a high speed steel powersaw blade designed for cutting almost any material. Suitable for use on modern machines with a high degree of control.Size 300mm (12 in) x 25mm (1 in) x 10 tpi
The CorePlus Hard Tile Turbo Diamond Blade has an ultra-thin, continuous PleXXus Turbo rim segment for precision chip-free porcelain tile cutting.A precision-engineered, high-grade steel reinforced core centre prevents de-tensioning. There is a high concentration of premium-grade diamond within the bond. The bonded cutting edge also helps to prevent the diamond from getting glazed over in use.Manufactured to EN 13236 quality standard.The CorePlus HT115 Hard Tile Turbo Diamond Blade has the following specification: Diameter: 115mmBore: 22.23mmSegment Height: 10mmSegment Width: 1.2mm
The ALM Manufacturing RY124 Spool & Line 1.5mm x 6m is suitable for the following Ryobi ONE+ Models: 18 Volt: OLT1831, P2000, P2001, P2002, P2003, P2004, P2005, P2006, P2200, RLT1830Li. 24 Volt: RY24000, RY24020, RY24021, RY24200. 40 Volt: RY40200, RY40210A. It compares to: 310917001, 3110382G, 333038AG, AC14RSL, AC14RSLA, 211-515, AC14RL3, AC14RL5, RAC124, RAC125. Line Diameter: 1.5mm.Line Length: 6m. Manufactured in the UK.
The McAlpine SWHF5-WH is a high flow shower waste that is designed to efficiently remove water from shower trays. This shower waste features a 110mm white plastic plain cover flange and a 56mm tail, with a top access design and a backnut model for easy installation and maintenance.
The SWHF5-WH has a high flow design that ensures water is quickly and effectively removed from the shower tray, reducing the risk of blockages and overflows. The 110mm white plastic plain cover flange provides a sleek and modern finish, while also providing a reliable seal against the shower tray.
The 56mm tail of the SWHF5-WH is designed to connect easily to standard UK plumbing, making installation quick and hassle-free. The top access design of the shower waste also makes it easy to clean and maintain, with a simple and easy-to-remove cover.
The McAlpine SWHF5-WH is a versatile and reliable shower waste that can be used in conjunction with a wide range of shower tray designs. Its high-quality construction and effective water removal make it a popular choice among plumbing professionals, while its stylish white plastic plain cover flange ensures a modern and sophisticated finish to any bathroom.
Overall, the McAlpine SWHF5-WH high flow shower waste is a dependable and efficient solution for removing water from the shower tray. Its easy installation, simple maintenance, and sleek design make it a popular choice among homeowners and plumbing professionals alike.
・ Available in 1¼" and 1½" sizes
・ 56mm Tail available in white or Chrome Plated Plastic
・ 110mm Plain White Cover Flange
・ White plastic Backnut
・ Top access for easy cleaning
The McAlpine Coupling 1.1/4 Mxf X 3" S12A-3" is a plumbing fitting used to connect a 1.1/4 inch male pipe thread to a 3 inch solvent weld pipe. The "Mxf" in the description refers to the fact that one end of the coupling has a male pipe thread, while the other end is designed to fit inside a 3 inch solvent weld pipe.
The coupling is made by McAlpine, a UK-based manufacturer of plumbing and drainage products. The "S12A" in the description refers to the specific model of the coupling.
Overall, this coupling is useful for connecting pipes of different sizes together securely, ensuring a leak-free connection.
・ Available in 1¼", 1½", and 2" sizes
・ Available in 1", 2" and 3" lengths
・ Ideal for extending height of a trap
・ Manufactured in Polypropylene
The McAlpine UPSW-1 is a pumped shower waste outlet designed to provide efficient drainage for shower systems. It features a 70mm polished stainless steel flange with a plastic strainer grid, and a 15mm 'O' ring pushfit outlet.
The pumped shower waste outlet is designed to be used in situations where a gravity-fed waste system is not possible, such as in basement showers or areas where the waste outlet is located below the level of the waste pipe. The UPSW-1 features a built-in pump that helps to move water from the shower to the waste pipe, ensuring efficient and effective drainage.
The 70mm polished stainless steel flange provides a durable and stylish finish, and is suitable for use in a wide range of shower systems. The plastic strainer grid helps to prevent debris and other materials from entering the waste system, reducing the risk of blockages and other issues.
The 15mm 'O' ring pushfit outlet makes it easy to connect the pumped shower waste outlet to the waste pipe, ensuring a secure and leak-free connection. The outlet is designed for easy installation, and is suitable for use with a range of waste pipe materials.
Overall, the McAlpine UPSW-1 is a reliable and effective solution for situations where a gravity-fed waste system is not possible. Its built-in pump helps to ensure efficient and effective drainage, while its 70mm polished stainless steel flange and plastic strainer grid provide a durable and stylish finish. The 15mm 'O' ring pushfit outlet makes installation easy and ensures a secure and leak-free connection to the waste pipe.
・ 70mm polished Stainless Steel flange
・ Plastic strainer grid
・ 15mm 'O' ring pushfit outlet
・ Top access for easy cleaning
・ Fits 52mm waste hole
The Purdy Marathon Roller Sleeve is made with an exclusive blend of nylon and polyester. Designed to withstand wear and tear. Provides a smooth finish and even coverage, even after 40 hours of continual use. Doesn’t leave traces of lint. If consistency is key, this is the sleeve for you.Suitable for all latex and oil based paints. For flat, eggshell and satin finishes. Specifications: Material: Nylon/ Polyester knitted cover.Size: 228mm (9in).Pile Height: 19mm (3/4in).Core: 44mm (1.3/4in).
The Purdy Syntox Angled Woodcare Brush 50mm (2in) gives a superior, ultra-smooth finish on wood which is so glossy and shiny it looks polished. The bristles are designed to mimic natural ox-hair brushes so have the same benefits but last five-times longer. It works best with stains, varnishes, oils or anything to leave a clear finish as well as water and solvent-based finishes. Specifications:Material: Chinex & Nylon blend synthetic filaments.Handle: Thin Rattail.Ferrule: Round edge. Care Instructions:Remove excess paint with the Purdy Brush and Roller Cleaner before rinsing your brushes in cleaning liquid.
Irwin 6X Blue Groove Stubby Wood Bits are ideal for drilling wood and offer 6x faster drilling penetration than a standard flat bit. Their 'Tri-Flute' design allows for faster chip ejection and their full screw tips ensure ease of use and pull through. The cutting spurs produce clean holes with minimal break out and the tapered flute reduces binding. The drill bits are also heat treated for extra durability. Stubby drill bits are 10cm (4in) long, making them ideal for drilling through joists or in enclosed areas. Suitable for holes up to 5cm (2in) deep.Specifications:Diameter: 32mm.Working length: 50mm (2in).Overall length: 100mm (4in).
Rivets are generally acknowledged as the most versatile fastening method available with the benefits of secure fixing from one side. The Faithfull Pop or Blind rivets are manufactured from quality aluminium with a steel pulling mandrel. These rivets are suitable for use with most hand riveters and are RoHS compliant for use in electrical appliances.Type: AluminiumDiameter: 4mmLength: Medium 10mmGrip range: 4-6mmPack qty: 100
UniBond Grout Reviver gives faded and tired-looking grout a new professional finish. It offers triple protection, repels and protects against mould. Ideal for bathrooms and kitchens thanks to its waterproof, durable formula. Suitable for use on fully glazed ceramic and porcelain tiles. Specification: Drying Time: 1 hourColour: White
This IRWIN® Speedhammer Quad Drill Bit has the following specification: Diameter: 5.5mmOverall Length: 160mmWorking Length: 100mm The IRWIN® Speedhammer Quad Drill Bit is ideal for drilling plug and anchor holes in masonry, all types of stone and concrete. Its 4-cutter geometry, drills a more concentric hole for the best fixing retention. The full head carbide tip offers the highest levels of drilling life and durability. A unique bonding system connects the solid carbide head to the 4-flute spiral. This design provides faster, more efficient dust removal. The specially engineered grooves are designed to minimise friction, resulting in increased speed and longer life. Manufactured in Germany with premium steel. Meets PGM standards for drill bits used for anchor fixing.
Paslode Replacement Ni-MH Battery for the 404717 Nickel-Cadmium (Ni-Cd) Impulse battery. Suitable for use with the following Paslode Models: IM350+, IM65, IM65A, IM50 and IM45 GN.
DEWALT 28mm Hex shank 30kg Steel Clay Spade fully hardened steel body delivers increased life and durability. Micro-processor controlled heat treatment for consistently tough, long life chisels.
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus EXTREME 2® Drill Bit has the following dimensions: Diameter: 10mmWorking Length: 550mmOverall Length: 600mmPack Quantity: 1
This Stanley DynaGrip filling knife is suitable for smoothing filler. The high grip contoured handle, which is moulded directly onto the blade for durability, has been designed and tested to ensure comfort and efficiency in use. The blade is made of fully ground flexible stainless steel which makes it strong, easy to clean and rust-free.Blade width: 50mm.
The DEWALT DCH481 XR FlexVolt Brushless SDS Max Hammer produces a performance that rivals corded machines, the brushless motor provides extreme runtime and reduced maintenance. Rotation stop mode for chiselling and impact stop mode for rotary only drilling with dry diamond cores. Ideal for drilling anchors and fixing holes into concrete, brick and masonry up to 40mm in diameter. For increased safety, the anti rotation system detects a loss of tool control, and reacts by instantly cutting the power. It has a compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. Fitted with a bight white LED, with a delay feature for improved visibility. DCH481X2: 2 x 18/54 Volt 9.0/3.0Ah Li-Ion Batteries.DCH481N: Bare Unit, No Battery or Charger. Specification Modes: Rotary Only, SDS Hammer, Chisel Only. No Load Speed: 540/min.Impact Rate: 0-3,150/min with 6.1 Joules.Capacity: Concrete: 40mm, Breakthough: 65mm, Core: 100mm.Weight 5.4kg.The DEWALT DCH481X2 XR FlexVolt Brushless SDS Max Hammer is supplied with: 2 x 18/54 Volt 9.0/3.0Ah Li-Ion Batteries1 x Multi-Position Side Handle1 x Multi Voltage Charger1 x Heavy-Duty Kitbox DEWALT XR FlexVolt batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased runtime.
The RIDGID 560 Top Screw Stand Chain Vice has a handy, portable design with a sturdy cast-iron frame for durability. It is equipped with pipe rest, pipe bender and tool tray. The 1.1/4in pipe for legs and connecting pipe are not supplied. Specification Capacity: 3-125mm (1/8 - 5in).Weight: 11.7kg.
