The DEWALT DCF900 XR High Torque Impact Wrench has an efficient brushless motor delivers high performance, extends tool life and allows for much shorter design. Its variable trigger provides complete control over all applications.The compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specifications: Bit Holder: 1/2in Square Drive.No Load Speed: 0-2,300/min.Impact Rate: 18,000/bpm.Max. Torque: 1,396Nm, Breakaway Torque: 1,898Nm.Weight: 2.8kg (without battery).The DEWALT DCF900N XR Brushless 1/2in High Torque Impact Wrench comes as a bare unit, NO battery or charger supplied.
The Irwin Torx insert screwdriver bits are engineered for use in hand-driving applications or with power tools. They are designed for use in an insert holder with C-clip for retaining ring notch. They are compact and versatile with a 1/4 inch hex body and made from high grade S2 steel.The Irwin Screwdriver Torx bits come in a pack of 10 with the following dimensions: T15 x 25mm.
These DEWALT HCS Jigsaw Blades are made from High Carbon Steel (HCS) and have been engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics.These DEWALT DT2053 (T101BR) HCS Downcutter Blades are ideal for splinter free cuts in laminates. Suitable for woods, plywood, chipboard, fibre board up to 40mm thick.
The DEWALT DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. DCG405P2: 2 x 18 Volt 5.0Ah Li-ion BatteriesDCG405N: Bare Unit, No Battery or Charger Specification: No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 1.75kg.The DEWALT DCG405N XR Brushless Grinder is supplied as a bare unit, no battery or charger supplied.
The Original and best, Brummer Wood Filler is ideal for repairing furniture, doors, skirting boards and wooden floors, as well as picture frames and mouldings. Highly versatile, it can be used outside if varnished or painted over and mixed with other Brummer wood filler colours. It can be drilled and sanded just like wood itself, or stained with a proprietary stain to achieve any desired shade. Heat proof (up to 90 degreeC), works equally well on most metals and can be used under nearly all types of decorative finish including polish, lacquer, varnish and paint. Available in small (250g) and medium (700g) sizes, in a range of popular wood shades to complement the finishes used to enhance the beauty of natural wood.
The DeWalt Elite Series Carbide SDS and 7pc Drill Bit Set is ideal for drilling holes in concrete. High speed blasting strengthens the bit to reduce the risk of breakage.The 4 cutter carbide head provides maximum performance. Sizes: 5-12mm.
Stanley Tools FatMax® Hard Shell Tactical Knee Pads have a semi-rigid construction that offers improved protection. Each knee pad is fitted with a single neoprene strap for a comfortable, secure fit. With a thick layer of EVA high-density foam padding and high memory gel for maximum comfort and a long product life. The outer 1680 denier fabric provides added strength and abrasion resistance. Ideal for protecting the knees when participating in framing, carpentry, automotive, general construction work, as well as flooring and carpeting.
Stanley SharpShooter Type G heavy-duty staples. Also known as Type: 4, 11 or 140. Fits Stanley: 69-809, FMHT0-74997, TR60, TR100 series, TR200 series, TRE500 series, PHT150 and G11.1 x Pack of 1000 Stanley TRA708T Heavy-Duty Staples 12mm
The Stanley Tools Leather Nail & Hammer Pouch has multiple, easy access pockets and holders for quick access on the job. Fitted with a metal hammer loop that is a comfortable reach. Made from professional, high grade leather (suede) with rivet reinforced stress points and a wide belt slot.
Rustins Quick Dry Step & Tile Paint is a high-performance interior and exterior gloss paint for tiles, concrete and bricks. It is quick drying, hard-wearing and weather-resistant. Not recommended for use on glazed or quarry tiles. To apply, use a good quality brush. 2 coats are usually sufficient. Sand lightly between coats if needed. Do not apply outdoors if rain is imminent, and do not use below 10°C. Drying time: Approx 4-8 hoursRecoat: 6-8 hoursCoverage: 14m²/LSpecification: Colour: RedSize: 2.5 Litre
A manually adjustable general purpose Block plane. Ideal for model makers, craft applications and light-duty jobs. Cutter Width: 35 mm (1.3/8in).Length: 140 mm (5.1/2in).
These Stanley Long Nose Pliers are made from drop-forged steel for high strength and durability. The handles are made from polypropylene with TPR overlay. Their zone configuration provides added power, comfort and control. Size: 200mm.
High leverage compound cutting action snips made from forged alloy steel. Chrome Molybdenum construction with serrated cutting edge to prevent slippage when cutting. The one handed automatic latch releases with the squeeze of the handles which are bi-material for extra comfort and grip. These snips cut up to 18 gauge steel and are suitable for cutting aluminium, sheet uPVC, wire mesh, leather, copper and plastic. 1 x Stanley Green Aviation Snip Right Cut 250mm (10in)
Stanley Club Hammer with a fibreglass core for greater strength and longer durability. The shaft is covered by an ergonomic, anti-slip, bi-material handle. It has a drop forged alloy steel head with polished faces and chamfered edges. The head and handle have a reinforced connection, held by a 2-component epoxy resin adhesive.1 x Stanley Fibreglass Club Hammer 1.0kg (2.1/4lb)
The Stanley FatMax® VDE Insulated Voltage Tester has an insulated plastic handle for complete safety. Its blade is made from chrome vanadium steel for long life. Tip: Parallel 3 x 65mm.
The Stanley FatMax® Fixed Blade Folding Knife has an ergonomic design for comfortable, extended, heavy-duty use. Its soft hand grip and thumb pad ensure comfort and control, whilst its belt clip enables convenient knife transport. The knife has a metal body for added durability. It has an in-built tape cutter for opening boxes without damaging the contents. The knife has a quick blade change mechanism and on board blade storage for convenient and quick blade replacement. Length: 170mm.
The Stanley FatMax® Thru tang bevel edge chisels have an ergonomic handle design incorporating a shatterproof polymer handle. The ergonomic soft grip longer handle is useful for maximum control, feels good in the hand and is comfortable in all applications. The friction welded bolster also gives strength and durability. The steel striking cap can be struck with a steel hammer for increased cutting force and the body resists most solvents. The ISO Standard Blade is made from high quality ball bearing grade steel EN31 and is fully ground and finished for ultimate sharpness and the full length blade guard provides added safety. This FatMax chisel range has a superior design - 50% stronger handle (than the old Dyna Grip Pro Chisel on side impact test) for extra reassurance and durability. The quality chrome alloy (ball bearing grade) steel provides superior edge retentionThe Stanley STA 0-16-259 FatMax® Thru Tang Chisel is 20mm (13/16 inch) in width and 135mm in length
These Stanley End Cutter Pliers are made from drop forged steel for high strength and durability. The handles are made from polypropylene with TPR overlay. Their zone configuration provides added power, comfort and control. Size: 150mm.
The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.1 x Stanley DynaGrip™ Bevel Edge Chisel With Strike Cap 18mm (3/4in)
The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.1 x Stanley DynaGrip™ Bevel Edge Chisel With Strike Cap 16mm (5/8in)
The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. With a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.1 x Stanley DynaGrip™ Bevel Edge Chisel With Strike Cap 12mm (1/2in)
The DEWALT Torsion Pozi Bits have a hardened core for extra strength and durability. They have a flexible torsion zone absorbs torque peaks and reduces breakage (Torsion bits only). The design features extra grip ribs that grip the screw and reduce slipping (specific bits only). They are tough quality, professional screwdriver bits.DEWALT DT7211 Torsion Bits PZ1 25mm Pack of 5
This combination square has a 300mm/12in rule with class 2 accuracy and is coated to resist rust. With metric and imperial graduations.It has a die-cast metal body, heavy-duty screw and regulated vial to ensure accuracy. With high quality brass nut and scriber fittings for long life.Size: 300mm/12in.
The Stanley Curved Jaw Mole Grips are ideal for gripping pipes or hexagon nuts. The forged and machined jaws offer maximum durability and there is also a built-in wire cutter. The body is chrome plated to resist corrosion and the knurled screw at the base of the handle adjusts the clamping pressure and the non-pinching pull jaw release lever improves safety and ease of opening.These Stanley Tools Curved Jaw Locking Pliers have the following specification: Length: 229mm (9in).
The Stanley Tools ControlGrip™ Diagonal Cutting Pliers are made from forged carbon steel with an induction hardened blade and tempered jaws for long life. Precision milled cutting edges and pivot for smooth opening and closing of the jaws. All exposed steel surfaces have been sanded and are protected against corrosion. With a bi-material, ergonomically designed handle that is easy to hold, even with oily hands.1 x Stanley Tools ControlGrip™ Diagonal Cutting Pliers 200mm.
Rustins Quick-Drying All Surface All Purpose (ASAP) Paint is a water based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. ASAP has a low odour and does not require any priming. It is suitable for use on wood, metal, plastic, galvanised steel, uPVC, lead, glass, tiles, plaster, mdf, masonry and melamine.This Rustins ASAP Paint has the following specification: Colour: Cream.Size: 250ml.
Shock-resistant plastic moulded stock with accurately machined face.Hardened blued steel sliding blade.Chrome plated metal locking lever to secure blade.Used for accurately transferring angles from one piece of work to the other.Hardened and tempered blade with blued finish. Sliding blade can be locked into position by means of a plated lever. Size. 9in.
The DEWALT Krypton PU Sports Safety Trainers have a lightweight PU moulded upper with a comfort insole, padded tongue and collar for increased all day comfort. Has a 200 Joule steel toecap, with a composite midsole for underfoot protection. Also has a Phylon/rubber outsole. EN Test: CE EN ISO 20345-2011.Safety Rating: SBP.Slip Rating: SRA.1 x Pair of DEWALT Krypton PU Sports Safety Trainers UK 6 Euro 39
The Faithfull Carpenters Hammer with precision ground and hardened curved claws to withstand the most heavy nail pulling. The securely fitted steel shaft providing maximum leverage. Each hammer is individually tested for weight tolerance, steel ingredients, crack testing, measured hardness, manufacturing processes, heat treatment and overall dimensions and is manufactured in accordance to BS876. Features: Hardened and heat-treated head. Precision ground striking face. Sturdy claw for nail pulling. Tubular steel shaft. Rubber non-slip handle grip.Weight: 570g (1 1/4 lb)
Recoil inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa.They reduce thread wear and are interchangeable with other brands of inserts or tooling.Size. 7mm x 1.0Length. 1 1/2 x Diameter.
Bathroom / Toilet Extractor Fan with over-run timer
_Mains 230/240V AC. Extractor fan suitable for small bathroom situation.
_Timer over-run continues to run fan after room light is switched off (permanent live required)
_22 litres per second / 80 cubic metres per hour extract rate. 15 watts power consumption.
_Sound output 48dB(A) @ 3m. IP22
_156mm wide x 156mm high x 48mm deep. 99mm spigot that extends for 53mm
Hozelock End Plug is made from high-quality, UV stable plastic. Used to cap off or close the ends of Ø13mm supply tube. In winter it can be flipped open to allow the system to drain, in order to prevent frost damage.Pack of 12 Hozelock 7031 End Plugs 13mm.
