The Wiha Double Open-End Spanner Set, 12 Piece, is made from high-quality, chrome vanadium steel with a corrosion-resistant and easy-to-clean surface. The design enables high leverage without force, making it easy to open any fastening. With 15 degree jaw positioning, the double open-end spanners are perfect for working in confined spaces. They are also excellently suited for tightening screws and nuts. Conforms to DIN 3110. This 12 Piece set is supplied in a practical holder. The holder can be opened with just one hand in order to remove the right size from it. Its non-slip surface helps to ensure a strong hold even in oily or wet work situations. Contains the following sizes: 6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 4 x 27, 25 x 28 & 30 x 32mm.
The Teng Tools 3 piece pry bar set is ideal for levering, positioning and aligning jobs. The bar's roll heads ensure excellent leverage, whilst their pointed taper end can be used for lining up. Supplied in storage tray. Contents: 1 x 12in Roll/Heel Bar.1 x 16in Roll/Heel Bar.1 x 20in Roll/Heel Bar. Specification Dimensions: 560 x 110 x 40mm.Weight: 1.6kg.
A professional 3/8 in drive regular 6 point AF socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. This socket has a stepped collar on the shank and is of the hexagonal variety.Manufactured from chrome vanadium steel with a satin finish.Size: 5/8 AF.Overall length. 29mm
This Blue Spot socket set contains 11 useful 1/4 inch square drive sockets which are made from chrome vanadium steel and which have a deep reach for better access. The set contains the following sizes:4, 4.5, 5, 6, 7, 8 ,9, 10, 11, 12 and 13mm. Supplied with a storage rack.
A double ended ring spanner designed, manufactured and tested in accordance with ISO 9002. Different size bi-hexagonal openings at each end. Double curved 75° high angle. Manufactured from chrome vanadium steel with a satin finish. DIN 838.Size. 30 x 32mm.Length. 362mm.
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 3/16 x 1/4 Whitworth Length 100mm (4 in)
A professional 1/2in square drive Torx bit socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Overall Length: 55 mm.Size TPX30
This Teng Tools ratcheting combination spanner combines an open ended spanner with a 72-tooth 12-point ring ratchet. The ratchet has a 'flip reverse' feature, which switches the direction of the ratchet, and it is offset at a 13° angle for ease of access. Both ends are of the same size. The spanner is made from chrome vanadium steel for strength and durability, and has an attractive satin finish.The TEN600514R Ratchet Combination Spanner has the following specifications:Size: 14mm. Length: 191mm.
A professional 3/8 in drive regular 6 point AF socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. This socket has a stepped collar on the shank and is of the hexagonal variety.Manufactured from chrome vanadium steel with a satin finish.Size: 13/16 AFOverall length. 29mm
A professional matt chromed 1/4in square drive socket, produced in accordance with ISO 9000 and AS954 specifications, for increased torque and reduced risk of rounding fasteners. This hexagonal socket has a relatively short depth and a stepped collar on the shank. Overall Length: 24mm.Size. 13mm
This Teng Tools professional hexagonal 1/2in square drive socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and to reduce the risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish.The TENM1205196 1/2inch square drive socket has the following specifications:Size: 19mm.Length 38mm.
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. They are size marked for easy identification. These regular 6-point deep impact metric sockets have a 3/4 inch square drive and have a locking pin and retaining ring facility.The TEN940636 Impact Socket has the following specifications: Length: 95mm.Size: 36mm.
This Stanley module contains 10 Offset Double Ring Spanners. Each spanner has anti-slip jaws, Maxi-Drive profile and a matt chrome finish. The set contains the following sizes: 6x7, 8x9, 10x12, 11x13, 12x14, 14x15, 16x17, 18x19, 21x23 and 22x24mm Designed to fit the Stanley roller cabinet range.
The Bahco S103 103 piece socket & spanner set contains a variety of popular sizes in a handy carry case, with easy identification sizes printed on the tray. Contents: 17 x 1/2in Square Drive Sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 24, 27, 30, 32 and 34mm. 6 x 1/2in Square Drive Deep Sockets: 10, 13, 16, 17, 18 and 19mm. 12 x 1/4in Square Drive Sockets: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11 and 13mm. 6 x 1/4in Square Drive Deep Sockets: 7, 8, 9, 10, 11, 12, and 13mm. 2 x 1/2in Spark Plug Sockets: 16 and 21mm. 3 x 1/4in Phillips Bits: PH1, PH2 and PH3. 3 x 1/4in Pozidriv Bits: PZ1, PZ2, and PZ3. 9 x 1/4in TORX Bits: 6, 8, 9, 10, 15, 20, 25, 30 and 40. 6 x 1/4in Hex Bits: 3, 4, 5, 6, 7 and 8. 3 x 5/16in TORX Bits: 45, 50 and 55. 2 x Bit Holder: 1/4 and 1/2in. 2 x Universal Joint: 1/4 and 1/2in. 3 x Extension Bar: 1/4in: 100mm, 1/2in: 125 and 250mm. 2 x Ratchet: 1/4in 150mm, 1/2in: 250mm. 2 x Screwdriver Reversible Ratchet: 1/4in: 150mm, 1/2in: 250mm. 1 x 1/4in Bit Ratchet. 1 x 1/4in Square Bit Adaptor. 1 x 1/4in Hex Magnetic Extension Bar. 13 x Metric Spanner: 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18 and 19mm. 9 x Hex Keys: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10.
A professional, S2, 1/2in drive hexagon bit socket produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Manufactured from chrome vanadium steel with a satin finish. Overall Length: 55mm.Size 17mm
The Teng Tools Deep Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 19mmLength: 78mm
The Norbar NorTronic® is an electronic torque and angle wrench capable of measuring, displaying, storing, and transmitting test results as well as receiving configuration settings from TDS (Torque Data Systems PC Software) via a USB or wireless interface. It has two identical colour display positions at 90° to each other. This enables the user to see a display when the tool is operated in either the vertical or horizontal plane. It also gives visual, audible, and physical indication via vibration that the target torque setting has been reached. Drive: 1/2in. Capacity: 5 - 50Nm.
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 5/8 x 11/16 WhitworthLength 150mm (6 in)
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 1/8 x 3/16 WhitworthLength 100mm (4 in)
