This BlueSpot Tools Set includes: 1 x Telescopic Inspection Mirror with 360° rotation for easy adjustment and an all round view. Extends from 195mm to 540mm. 1 x Telescopic Pickup Tool witha high strength magnet for a secure hold. Maximum magnetic lift on the inspection tool: 1.3kg (3lb). The pick up tool extends from 145mm to 560mm.
The BlueSpot 1/4in Torque Wrench is manufactured from chrome vanadium steel for increased durability. Designed to be utilised where fixings are required to be tightened to a predetermined torque load. Please note that there is not a clickable noise when the desired torque has been met. Supplied with a useful storage case. Warning: All torque wrenches must be stored on the lowest torque setting to avoid a set in the spring. Failure to do so can result in a loss of accuracy over time. Specification: Torque Range: 2-24Nm
BlueSpot Flexible Ratchet Spanner with a 180 degree pivoting ratchet ring head. Manufactured from chrome vanadium steel. Heat-treated and nickel-plated for increased durability. Fully polished mirror finish. The 5 degree ratcheting increment makes it ideal for use in tight spaces. 72 teeth.1 x BlueSpot Tools 180 degree Flexible Head Ratchet Spanner 14mm.
The BlueSpot Flexible Ratchet Spanners feature 180° pivoting ratchet ring heads. Manufactured from chrome vanadium steel, heat treated and nickel plated for increased durability. They have a fully polished mirror finish. With 8° ratcheting increments make the set ideal for use in tight spaces.This set contains the following sizes: 8, 10, 12, 13, 14, 15, 17 and 19mm.
The BlueSpot 7 Piece 3/8in Drive Extra Long Spline Socket Bit Set is manufactured from chrome vanadium steel for increased durability. Features an extra long (110mm) shaft for accessing hard to reach areas that conventional bits cannot reach. The set contains the following sizes:M4, M5, M6, M7, M8, M9 and M10
The Bahco BMR240 Magnetic Tray is a rectangular magnetic parts tray with rubber coated magnets for surface protection, and is made from mirror finished stainless steel. It has a protruding plastic lip which means no flat spot is required, and therefore can also store non-magnetic items securely. It can be used as a hanger to easily transport bits from one place to another.
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.Size 3/4 x 7/8 Whitworth Length 180mm (7 in)
Melco Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. The tubular box spanner is manufactured from bright plated steel and is able to accommodate a tommy bar.The Melco TA8 A/F Box Spanner is made with 3mm steel and has the following specification: Size: 9/16 x 5/8in.Length: 125mm (5in).
The Facom 6-point OGV R.LA sockets have a 1/4 inch drive to fit 1/4 inch ratchets. The sockets are long-reach, and their OGV profile allows tightening torque to be applied to the sides, rather than to the angles of the nut/bolt. They are an excellent choice for tightening/loosening harder to reach nuts, bolts and other fasteners. Available in a range of different metric sizes. ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMR13LA Deep Socket has the following specifications:Socket size: 13.0mm.Length: 50.5mm.
The Britool combination spanners (metric) are crafted in chrome vanadium steel and finished in high chrome.The ring spanner end has a 12-point OGV® profile angled at 15° , maximising the contact surface with the nut for a longer lifetime. The open end is angled at 15° from the handle axis.ISO 691 - ISO 1711-1 - ISO 3318 - ISO 7738 - DIN 3113.The Britool BRIE113225B Combination Spanner 30mm has the following dimensions:Size: 30mmLength: 340mmWeight: 495g
These Facom 12-point OGV sockets have a 1/2 inch drive to fit 1/2 inch ratchets. They are high quality and ideal for tightening and loosening bolts, nuts and other fasteners. The sockets are available in a range of metric sizes. Performance: conform to ISO 2725-1, DIN 3124 and NF ISO 2725-1.The FCMS32 socket has the following specifications:Socket size: 32.0mm.Length: 44mm.Weight: 215g.
The Britool 1/2 inch drive 12-point sockets (metric) are crafted from chrome vanadium steel and finished in high chrome. The OGV® profile allows tightening torque to be applied to the sides rather than to the angles of the nut. This product is for manual use only. ISO 2725-1, DIN 3124, ISO 1174-1, ISO 1711-1, ISO 691.The Britool BRIE117058B Socket 12 Point Standard 1/2 inch Drive 15mm has the following dimensions:Size: 15mmLength: 38mmWeight: 54g
This Teng Tools Professional 3/8in drive S2 hex socket bits made from chrome vanadium steel with a satin finish. Overall Length: 49.5mm.The TENM381503 Hex Socket Bit has the following specifications:Overall length: 49.5mm.AF Size: 3mm.
A double ended ring spanner designed, manufactured and tested in accordance with ISO 9002. Different size bi-hexagonal openings at each end. Double curved 75° high angle. Manufactured from chrome vanadium steel with a satin finish. DIN 838.Size.12 x 13mm.Length. 217mm
The Teng Tools Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 11mmLength: 38mm
A slim open ended spanner designed, manufactured and tested in accordance with ISO 9002 with 15° angled heads. Chrome vanadium. Satin finish. DIN3110Size 24 x 27mm.Length 263mm
Teng Tools impact sockets are specifically designed for use with power tools and air tools. Manufactured in chrome molybdenum in accordance with GGG-W-6608, these sockets ensure the highest quality. They are size marked for easy identification. These regular 6-point deep impact metric sockets have a 3/4 inch square drive and have a locking pin and retaining ring facility.The TEN940632 Impact Socket has the following specifications: Length: 95mm.Size: 32mm.
The Teng Tools Deep Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 18mmLength: 78mm
A professional bi-hexagon, AF socket produced in accordance with ISO 9000 and AS5954 specifications for increased torque and reduced risk of rounding fasteners.Manufactured from chrome vanadium steel with a satin finish.1/2 in square drive.Size 7/8 AFLength 40mm
A professional bi-hexagon, AF socket produced in accordance with ISO 9000 and AS5954 specifications for increased torque and reduced risk of rounding fasteners.Manufactured from chrome vanadium steel with a satin finish.1/2 in square drive.Size 1 1/16 AFLength 43mm
The Facom 467B Series Combination Ratcheting Spanners feature a reversible ratchet system incorporated within a compact ring head and a fixed open end. The wrench is angled at 15° and has a fine ratchet system which allows a 5° working arc. The spanners have a satin chrome finish. The ring end features the innovative Ring Stop system that prevents fasteners from going through or slipping off the wrench whist the open end features anti slip jaw design preventing slippage. Compact I-Beam shaft profile ensures comfort and allows the user to apply higher torque for longer periods. These high performance spanners are suitable for aircraft fasteners with an integral reversing lever which avoids any risk of accidental reversal. Manufactured to ISO 1711-1.1 x Facom 467B.17 Anti Slip Combination Ratcheting Spanner 17mm
The Facom 440 OGV® metric combination wrenches combine high mechanical performance with compact design, complying with aeronautical standards. Ring clearance is designed for better access to recessed or closely spaced screws and the 12-point OGV® profile of the 15º angled ring head allows for a high torque without damaging the nut. The wrenches have optimised open end / handle geometry, offering increased accessibility and feature ground contact faces. Finished in satin chrome. Industrial and automotive: Conforms to ISO 691, NF ISO 691, ISO 7738, NF ISO 7738, ISO 3318, NF ISO 3318, ISO 1711-1, NF ISO 1711-1 and NF E74-306.Aerospace : Conforms to SAE AS 954E.The FCM44013 Combination Spanner has the following specifications:Head size: 13mm.Length: 170mm.
