The DEWALT DW088K 2 Way Self-Levelling Line Laser is accurate to ±0.3mm/m in levelling applications. Self-levelling up to 4° surface angle with automatic out of level indication. It uses a simple 2 button operation with a low battery indication for ease of use. The built-in magnetic pivot bracket mounts easily on metal surfaces, whilst the over moulded housing and thick glass protects the tool and helps maintain calibration under jobsite conditions. The included kit box helps to protect the unit and helps maintain calibration when stored in gang box. Supplied with: 1 x Wall Mount Bracket, 1 x Heavy-Duty Carry Case and 3 x AA Batteries. DW088K: Laser ONLY.DW088KD: Laser & Detector.The DEWALT DW088K 2 Way Self-Levelling Line Laser is supplied with: 1 x Wall Mount Bracket1 x Heavy-Duty Carry Case3 x AA Batteries
The DEWALT DCE088D1G Self-Levelling Green Cross Line Laser projects bright crossing horizontal and vertical lines. It has a variable blink sequence for manual mode and a full-time pulse mode, for use with detector whilst maintaining full brightness for visibility. The laser is fitted with a locking pendulum to help prevent damage to internal components. The integrated magnetic, pivoting base has a 1/4in thread. IP65 rated, against projected water and dust damage. Supplied with: 1 x 10.8 Volt 2.0Ah Li-Ion Battery.1 x Charger.1 x Kitbox. Specification Laser Class: 2, Level Accuracy: ±3mm@10m.Self-Levelling Range: 4°.Visibility Outdoor/Indoor: 30m (60m with detector).Thread: 1/4in.
Denso tape is a cold applied tape which remains plastic over a wide temperature range. The tape is non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis, salts and micro-organisms and highly impermeable to water, water vapour and gases. Application:Used for the protection of buried or exposed pipes, rods, cables, valves and metal fittings from corrosion. Composition:Made from non-woven synthetic fibre fabric, which impregnated and coated with a neutral compound based on saturated petroleum hydrocarbons and inert siliceous fillers. Specifications:Breaking strength: 200 N/50mm minimum. Elongation at break: 10%. Breakdown voltage: 16kVTemperature range for application: -5°C to 45°C. Temperature range for service: 55°C maximum. Thickness: 1.15mm.DENTAPE75MM Denso Tape has the following dimensions:Width: 75mm. Length: 10m.
Denso tape is a cold applied tape which remains plastic over a wide temperature range. The tape is non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis, salts and micro-organisms and highly impermeable to water, water vapour and gases. Application:Used for the protection of buried or exposed pipes, rods, cables, valves and metal fittings from corrosion. Composition:Made from non-woven synthetic fibre fabric, which impregnated and coated with a neutral compound based on saturated petroleum hydrocarbons and inert siliceous fillers. Specifications:Breaking strength: 200 N/50mm minimum. Elongation at break: 10%. Breakdown voltage: 16kVTemperature range for application: -5°C to 45°C. Temperature range for service: 55°C maximum. Thickness: 1.15mm.DENTAPE50MM Denso Tape has the following dimensions:Width: 50mm. Length: 10m.
Denso tape is a cold applied tape which remains plastic over a wide temperature range. The tape is non-hardening and non-cracking. It is highly resistant to mineral acids, alkalis, salts and micro-organisms and highly impermeable to water, water vapour and gases. Application:Used for the protection of buried or exposed pipes, rods, cables, valves and metal fittings from corrosion. Composition:Made from non-woven synthetic fibre fabric, which impregnated and coated with a neutral compound based on saturated petroleum hydrocarbons and inert siliceous fillers. Specifications:Breaking strength: 200 N/50mm minimum. Elongation at break: 10%. Breakdown voltage: 16kVTemperature range for application: -5°C to 45°C. Temperature range for service: 55°C maximum. Thickness: 1.15mm.DENTAPE100MM Denso Tape has the following dimensions:Width: 100mm. Length: 10m.
Denso Flashing Tape Primer is a brush applied solvent-based primer, used for priming surfaces prior to the application of Denso Flashing Tape. Composition: Solution of oxidised bitumen in aromatic hydrocarbon solvent.Cleaning solvent: White spirit. Specifications:Drying time: 20 - 30 minutes. Covering capacity: 7 - 8m² per litre. Application temperature: 0°C to 55°C. Solids content: 58% of weight. Volume: 1 litre.
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting. Uses include:Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters. Adheres to:Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics. Specifications: Breaking strength: 4.5 N/mm. Adhesion strength: 4.5 N/mm width. Temperature range for application: 5°C to 40°C. Temperature range for service: 80°C (maximum short term). Thickness: 1.0mm.Colour: grey.DENFTG75MM tape has the following dimensions:Length: 10m. Width: 75mm.
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting. Uses include:Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters. Adheres to:Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics. Specifications: Breaking strength: 4.5 N/mm. Adhesion strength: 4.5 N/mm width. Temperature range for application: 5°C to 40°C. Temperature range for service: 80°C (maximum short term). Thickness: 1.0mm.Colour: grey.DENFTG225MM tape has the following dimensions:Length: 10m. Width: 255mm.
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting. Uses include:Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters. Adheres to:Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics. Specifications: Breaking strength: 4.5 N/mm. Adhesion strength: 4.5 N/mm width. Temperature range for application: 5°C to 40°C. Temperature range for service: 80°C (maximum short term). Thickness: 1.0mm.Colour: grey.DENFTG300MM tape has the following dimensions:Length: 10m. Width: 300mm.
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting. Uses include:Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters. Adheres to:Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics. Specifications: Breaking strength: 4.5 N/mm. Adhesion strength: 4.5 N/mm width. Temperature range for application: 5°C to 40°C. Temperature range for service: 80°C (maximum short term). Thickness: 1.0mm.Colour: grey.DENFTG150MM tape has the following dimensions:Length: 10m. Width: 150mm.
Denso Flashing Tape is a tough but conformable, grey aluminium laminate-coated bitumen adhesive with a high melting point. This new foil laminate gives greater puncture resistance, improved tensile strength, elongation and tear strength. This offers the user a stronger tape that is easier to apply and accommodates the natural movement of joints in service, without the loss of adhesion or splitting. Uses include:Flashing repair and instillation, sealing lead sheeting, replacing lead and repairing valley gutters. Adheres to:Metal, concrete, brick, slate, tile, painted wood, glass and rigid plastics. Specifications: Breaking strength: 4.5 N/mm. Adhesion strength: 4.5 N/mm width. Temperature range for application: 5°C to 40°C. Temperature range for service: 80°C (maximum short term). Thickness: 1.0mm.Colour: grey.DENFTG100MM tape has the following dimensions:Length: 10m. Width: 100mm.
Bulldog's Standard range of tools are designed with the usual attention to detail and strength, but lower in price than other ranges. This taper mouth shovel is forged from one piece of steel to give maximum strength. It has an unvarnished hardwood shaft, which is strong and durable, and a T handle. Its taper blade makes breaking into aggregate easier every time. It is ideal for shovelling out or back filling trenches. The BUL5TM2T has the following specifications:Head size number: 2Head dimensions: 315 x 250mm (12.1/2 x 10in)Handle length: 711mm (28in)
A solid forged, taper mouth shovel that is ideal for trench work, concrete mixing and general shovelling. It has an unvarnished hardwood handle with a metal YD hilt with a wooden cross dowel for added comfort. Size: No.2.Blade: 310 x 250mm (12 x 10in).
A heavy-duty all steel taper mouth contractors shovel. Solid forged blade and socket correctly tempered for strength. It has a metal YD handle with wooden cross dowel. Size: No.2.Blade: 310 x 250mm (12 x 10in).
The Bostitch F33PTSM-E framing nailer features a short magazine for ease of use in tight spaces and has a Dial a Depth function. The paper tape nails are compatible with pazlode (IM350) framer. The powerful engine is capable of driving stick nails upto 90mm in length, whilst the lightweight magnesium body makes it comfortable to use all day long. It has CE compliant sequential trip fitted, for safer working on-site, a No-mar tip to prevent wood bruising and an adjustable exhaust to direct air away from workpiece and operator. Ideal for: Cases, Roof Trusses, Stud Walls and Timber Framing. Uses PT Fastner range. Specification Magazine Capacity: 50 (max).Nail Length: PT Series/WW 33º Series: 50-90mm Nails.Nail Diameter: PT Series/WW 33º Series: 2.5-3.3mm.Operating Pressure: 70-120 PSI, 4.8-8.3 Bar.Collation Angle: 33°.Weight: 3.5kg.
The Broadfix Levelling Shims have been manufactured with a high percentage of post-consumer recycled material. As they are made from plastic they will not swell, shrink or rot, they are completely waterproof. Capable of withstanding higher compressive loads than traditional timber levelling shims. This also makes them more economical. They are colour coded depending on size, for easy identification.This Broadfix Levelling Shim ;Mixed Set contains four of the most popular shim styles: 30 x Standard U Shims 101 x 43mm. 70 x Small U Shims 55 x 43mm. 15 x Precision Wedge Shim 78 x 45mm. 45 x Flat Packers 100 x 28mm.
The Bahco MTS Reversible Magnetic Tip Auto Pocket Tape has a non-reflective, nylon coated, stainless steel blade, with easy-to-read high contrast metric and imperial graduations on both sides of the blade. Its edges have been purposely deburred to help prevent the paint/coating from peeling with time and use. The stainless steel blade is 100% corrosion resistant and can be completely immersed in water for extended periods of time to no ill effect. Fitted with a magnetic, zero end hook, ideal for working with metal. Its bi-material case is made from impact resistant ABS plastic with an integrated belt clip. The automatic locking system makes it easier to use, the blade stays out until the retraction button is activated. This Bahco MTS Reversible Magnetic Tip Auto Pocket Tape has the following dimensions: Blade Length: 8m/26ftBlade Width: 25mm
The Bahco MTS Reversible Magnetic Tip Auto Pocket Tape has a non-reflective, nylon coated, stainless steel blade, with easy-to-read high contrast metric and imperial graduations on both sides of the blade. Its edges have been purposely deburred to help prevent the paint/coating from peeling with time and use. The stainless steel blade is 100% corrosion resistant and can be completely immersed in water for extended periods of time to no ill effect. Fitted with a magnetic, zero end hook, ideal for working with metal. Its bi-material case is made from impact resistant ABS plastic with an integrated belt clip. The automatic locking system makes it easier to use, the blade stays out until the retraction button is activated. This Bahco MTS Reversible Magnetic Tip Auto Pocket Tape has the following dimensions: Blade Length: 5m/16ftBlade Width: 25mm
The Bahco LTS Open Reel Fibreglass Tape has a nylon coated fibreglass blade that shows both metric and imperial graduations. The blade can withstand a pulling force of around 500kg. Debris can be easily washed from the blade. The Bahco LTS-50-E Open Reel Fibreglass Tape has both metric and imperial graduations. Blade Length: 50m/165ft Blade Width: 13mmAccuracy: EC Class II
The Bahco LTS Open Reel Fibreglass Tape has a nylon coated fibreglass blade that shows both metric and imperial graduations. The blade can withstand a pulling force of around 500kg. Debris can be easily washed from the blade. The Bahco LTS-30-E Open Reel Fibreglass Tape has both metric and imperial graduations. Blade Length: 30m/100ftBlade Width: 13mmAccuracy: EC Class II
The Bahco LTS Open Reel Fibreglass Tape has a nylon coated fibreglass blade that shows both metric and imperial graduations. The blade can withstand a pulling force of around 500kg. Debris can be easily washed from the blade. The Bahco LTS-100-E Open Reel Fibreglass Tape has both metric and imperial graduations. Blade Length: 100m/330ftBlade Width: 13mmAccuracy: EC Class II
This Bahco chalk line set contains the following: Chalk line (30 metres);Blue chalk (227g)Line level. This Bahco chalk line has a long line of mixed orange nylon and cotton. It has a breaking strain of 16kg and a high chalk retention in the cotton. It can hold 50g of chalk, allowing a long life between refills and has a 3 times rewind speed compared to other chalk lines. In addition, it features a claw and hook end, and an integrated belt clip. The specially shaped end means the line can be supported, allowing it be used as a plumb bob.
The Bahco 466 series levels have a unique design on the radius, end caps, fastening pins and convex radius. They have two vertical (plumb) vials and one horizontal vial, with an accuracy of 0.5 mm /m. The thick 1.7mm profile construction will not twist and it has a V groove at the bottom making these levels ideal for use on pipes. Machined surface on top and bottom. Anti-shock rubber end caps.Laser edged centre zero measuring scale along the edge. Anodised finish. 2 hand holes. (only 1 on 400mm).Length 600mm
The Bahco 466 series levels have a unique design on the radius, end caps, fastening pins and convex radius. They have two vertical (plumb) vials and one horizontal vial, with an accuracy of 0.5 mm /m. The thick 1.7mm profile construction will not twist and it has a V groove at the bottom making these levels ideal for use on pipes. Machined surface on top and bottom. Anti-shock rubber end caps.Laser edged centre zero measuring scale along the edge. Anodised finish. 2 hand holes. (only 1 on 400mm).The Bahco 466-400 Box Level has an anodised finished aluminium level with shock absorbing end caps and large vials thats provide ease of use. It offers permanent precision of ± 0.5 mm per metre. Machined surfaces and 'V' groove base, and a thick shaped profile. It also has laser marked measuring scale (for indication purposes only). Length: 400mm.Weight: 520g.
The Bahco 466-250 Scaffolders Level has a solid anodised aluminium body with one vertical and one horizontal vial. Its open frame design, makes it easier to handle. With 45° and 30° angles preset for quick angle setting. It has a rare earth magnetic material base and machined surfaces. Offers high precision, ± 0.5 mm per metre accuracy.
The Bahco 466 series levels have a unique design on the radius, end caps, fastening pins and convex radius. They have two vertical (plumb) vials and one horizontal vial, with an accuracy of 0.5 mm /m. The thick 1.7mm profile construction will not twist and it has a V groove at the bottom making these levels ideal for use on pipes. Machined surface on top and bottom. Anti-shock rubber end caps.Laser edged centre zero measuring scale along the edge. Anodised finish. 2 hand holes. (only 1 on 400mm).Length 2000mm
The Bahco 466 series levels have a unique design on the radius, end caps, fastening pins and convex radius. They have two vertical (plumb) vials and one horizontal vial, with an accuracy of 0.5 mm /m. The thick 1.7mm profile construction will not twist and it has a V groove at the bottom making these levels ideal for use on pipes. Machined surface on top and bottom. Anti-shock rubber end caps.Laser edged centre zero measuring scale along the edge. Anodised finish. 2 hand holes. (only 1 on 400mm).Length 1800mm
The Bahco 466 series levels have a unique design on the radius, end caps, fastening pins and convex radius. They have two vertical (plumb) vials and one horizontal vial, with an accuracy of 0.5 mm /m. The thick 1.7mm profile construction will not twist and it has a V groove at the bottom making these levels ideal for use on pipes. Machined surface on top and bottom. Anti-shock rubber end caps.Laser edged centre zero measuring scale along the edge. Anodised finish. 2 hand holes. (only 1 on 400mm).Length 1200mm
The Bahco 466 series levels have a unique design on the radius, end caps, fastening pins and convex radius. They have two vertical (plumb) vials and one horizontal vial, with an accuracy of 0.5 mm /m. The thick 1.7mm profile construction will not twist and it has a V groove at the bottom making these levels ideal for use on pipes. Machined surface on top and bottom. Anti-shock rubber end caps.Laser edged centre zero measuring scale along the edge. Anodised finish. 2 hand holes. (only 1 on 400mm).Length 1000mm
The Bahco 426TOR9 Torpedo Level is made from solid aircraft grade aluminium with 3 vials, plumb, horizontal and 45°. Uses rare earth magnets on its base. With machined surfaces and 'V' groove base for use on pipes. It offers permanent precision of ± 0.5 mm per metre.
The Bahco 416 Series Spirit Levels are made from lightweight aluminium with a 1.4mm wall thickness profile. They have unbreakable vials filled with liquid resistant to UV light and extreme temperatures. Two lines in each side of flat vial for easier use. The set contains the following sizes: 1 x 416-600 Spirit Level 1 Vertical & 1 Horizontal Plumb1 x 416-1200 Spirit Level 1 Vertical & 2 Horizontal Plumb1 x 416-1800 Spirit Level 1 Vertical & 2 Horizontal Plumb Specification: Measuring Accuracy: in the normal position 0.029° = 0.5mm/m, overhead measurement 0.043° = 0.75mm/m
Triangular, with edges tapering towards the point.Surfaces and edges single cut.For sharpening all types of saw with fine cross toothing.Second cut.Width figures indicate the largest width of the file section. Size: 5in.Type: extra slim taper saw file.
Triangular, with edges tapering towards the point.Surfaces and edges single cut.For sharpening all types of saw with fine cross toothing.Second cut.Size: 4in.Type: extra slim taper saw file.
Bahco Slim Taper Saw File, has a triangular shape with edges tapering toward the point. The surfaces and edges single cut. For sharpening all types of saws with fine cross toothing. Available only in second cut. Size: 150mm (6in).Size 150mm (6in).Side: 11/32in. Type: slim taper saw file.
Bahco Slim Taper Saw File, has a triangular shape with edges tapering toward the point. The surfaces and edges single cut. For sharpening all types of saws with fine cross toothing. Available only in second cut. Size: 150mm (6in).Size 125mm (5in).Side: 9/32in. Type: slim taper saw file.
