The Roughneck E-Z Read® Tape Measure is a premium grade product designed with the professional in mind. The outer casing is manufactured from a non-slip, shockproof rubber and is further complimented with a strong metal belt clip and powerful blade brake. The rustproof blade is nylon coated for maximum durability, with metric and imperial graduations and is fitted with a 3 rivet reinforced end hook. E-Z Read® blades, where every 1/8in is marked for easy reading, stud marking every 16in and truss marking every 40cm.This Roughneck E-Z Read® Tape Measure has metric and imperial graduations. Blade Length: 3m/10ftBlade Width: 16mm
The Ridgid CL-100 Micro Self-Levelling Cross Line Laser has a 360° swivel base and provides instant projection of super-bright vertical and horizontal lines. Its outer casing is IP54 rated, meaning it is protected against splash and dust damage. Uses single knob operation, making it very easy to use and allowing rapid levelling and alignment. Supplied with: 1 x Elevating Tripod, 1 x Laser Enhancing Glasses and 1 x Plastic Carrying Case. Specification Level Accuracy: 2mm @10m.Self-Levelling Range:±6°.Working Range: 30m.Power: 3 x AA Batteries 1.5V (Supplied).Tripod Thread: 1/4in.Laser: Class 2.Weight: 0.50kg.
Electrician's fish tape. Pulls cables through conduit.Durable plastic container. Side handle with brake.Made from flexible sprung steel. Length 50ft.Width 3.2mm.Thickness 1.6mm.
A single ended triangular saw file, single cut. For general saw sharpening and for sharpening dovetail and other fine toothed saws.Size 150mm (6in)Side 9/32inTanged
A single ended triangular saw file, single cut. For general saw sharpening and for sharpening dovetail and other fine toothed saws.Size 100mm (4in)Side 3/16inTanged
For filing all types of handsaws with 60° angle teeth.Straight set edges for filing gullets between saw teeth.Single Cut.Size 200mm (8in)Side 19/32inTanged.
For filing all types of handsaws with 60° angle teeth.Straight set edges for filing gullets between saw teeth.Single Cut. Size 150mm (6in)Side 15/32in.Tanged
For filing all types of handsaws with 60° angle teeth.Straight set edges for filing gullets between saw teeth.Single cut.Tanged Size 100mm (4in)Side 11/32in.
The Monument 339C Mains Water Tapered Stopcock Key is used primarily for turning on and off external 1/2 5/8 and 3/4in Crutch stopcocks which can be difficult to reach. The turning handle has one chisel end for lifting covers and has a painted finish.
Markal Dura-Ink are permanent, smear and water resistant heavy-duty felt tip markers with versatile bullet (15 and 55) and chisel tips (25), and are used in a wide variety of industrial applications. They mark on variety of surfaces inculding metal, wood, plastic, glass, rubber, cardboard, paper etc.Tub of 20
The Moore & Wright Engineer's Levels have a precision ground cast base with a V-groove for location on cylindrical work. Each level is fitted with a main, cross and plumb vial and the main vial is protected by a rotating shroud. The solution in the vials maintains colour and fluidity under all workshop conditions and the main vial has a sensitivity of 1 minute.The Moore & Wright ELS Engineer's Levels have the following specification: Length: 165mm (6.5in).Width: 34mm (1.34in).Height: 46mm (1.81in).Resolution: 0.3mm per metre (0.0035in per foot).
The Moore & Wright Engineer's Levels have a precision ground cast base with a V-groove for location on cylindrical work. Each level is fitted with a main, cross and plumb vial and the main vial is protected by a rotating shroud. The solution in the vials maintains colour and fluidity under all workshop conditions and the main vial has a sensitivity of 1 minute.The Moore & Wright ELM Engineer's Levels has the following specification: Length: 300mm (12in).Width: 36mm (1.42in).Height: 58mm (2.28in).Resoultion: 0.3mm per metre (0.0035in per foot).
The Marshalltown EzyScreed™ Level is made from lightweight aluminium, with a dual-edge design. The sharp edge of the blade can be used for cutting concrete while the rounded edge can be used for floating. As well as screeding concrete this tool can also be used as a check rod or float. The handle has a built-in level for checking your work. Attach the handle to the bottom side of the screed for double the life.1 x Marshalltown EzyScreed™ Level 2.4m (8ft)
The Marshalltown EzyScreed™ Level is made from lightweight aluminium, with a dual-edge design. The sharp edge of the blade can be used for cutting concrete while the rounded edge can be used for floating. As well as screeding concrete this tool can also be used as a check rod or float. The handle has a built-in level for checking your work. Attach the handle to the bottom side of the screed for double the life.1 x Marshalltown EzyScreed™ Level 1.8m (6ft)
The Marshalltown EzyScreed™ Level is made from lightweight aluminium, with a dual-edge design. The sharp edge of the blade can be used for cutting concrete while the rounded edge can be used for floating. As well as screeding concrete this tool can also be used as a check rod or float. The handle has a built-in level for checking your work. Attach the handle to the bottom side of the screed for double the life.1 x Marshalltown EzyScreed™ Level 1.2m (4ft)
The Lufkin Unilok Pocket Tape has a yellow clad abrasion resistant blade with 2 colour, easy to read markings in metric and imperial graduations. With a self-adjusting end hook. It has a lightweight high strength case with removable belt clip and a toggle lock that holds the blade securely at any length. Built-in shock absorber cushions blade return.This Lufkin YU835CME Unilok Pocket Tape has metric and imperial graduations. Blade Length: 8m/26ftBlade Width: 19mmAccuracy: EC Class II
Lufkin diameter steel tape is graduated in diameter inches on one side permitting direct reading of diameters. The zero falls in same place on each side of blade and has a manual operation, yellow Clad blade. Specification Blade Length: 6ft (72in)Blade Width: 1/4in
The Lufkin Frame Tape has a unique pistol grip compact design with a smooth wind-in mechanism which fits into a tool chest. The steel blade is graduated with both metric and imperial measurements and will not stretch.The Lufkin FT50CME Frame Tape has both metric and imperial measurements. Blade Length: 50m/165ftBlade Width: 13mmAccuracy: EC Class II
The Lufkin Frame Tape has a unique pistol grip compact design with a smooth wind-in mechanism which fits into a tool chest. The steel blade is graduated with both metric and imperial measurements and will not stretch.The Lufkin FT30CME Frame Tape has both metric and imperial measurements. Blade Length: 30m/100ftBlade Width: 13mmAccuracy: EC Class II
The Lufkin Long Fibreglass Dual Sided Tape has an open 4-arm frame design that protects the blade and does not trap dirt in the case. The durable, lightweight Hi-Viz® case design makes it easy to find, handle and rewind. Fitted with a 2-material grip that improves user comfort. The yellow clad fibreglass blade shows both metric and imperial measurements and is impervious to moisture. There is also a folding end hook for true zero measurements.The Lufkin FM030CME Long Fibreglass Dual Sided Tape has both metric and imperial measurements. Blade Length: 30m/100ftBlade Width: 13mmAccuracy: EC Class III
The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction hardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 109mm (4.29 in). Blade length (B): 9mm (0.35 in). Head width (C): 9mm (0.35 in). Head depth (D): 6mm (0.24 in). Tip width: (F): 1.0mm (0.04 in). Cutting capacity: 0.2-1.25mm. Head type: TaperedCutting edge: Micro-bevel. The tapered head is the smallest of the standard cutting heads available. Not only does it taper on both sides, but also the underside is cut away, allowing the operater to gain access into some difficult areas. The Micro-Bevel cut is designed to meet the requirements of the electronic assembly industry. Leads are ‘pinched’, allowing less altitude and a smaller overall surface area. Because of its design, it has a wide cutting range and variety of uses.
The Kuny's fully adjustable braces to fit all sizes, with 52mm (2in) wide elastic material. Nylon stitched for durability and heavy-duty steel fastening clips.Colour = Yellow
