The Makita GA012GD201 XGT 40Vmax BL Paddle Switch Grinder comes with the following: 2 x 40V 2.5Ah Li-ion XGT 40Vmax Batteries.1 x DC40RA XGT 40Vmax Battery Charger.1 x Side Handle.1 x Lock Nut Wrench.1 x A-80640 Grinding Wheel 115 x 6mm.1 x Type 4 MAKPAC Carry Case.
The Makita GA005GZ XGT 40Vmax BL Grindercomes with the following: 1 x Side Handle.1 x Lock Nut Wrench.1 x A-80656 Grinding Wheel 125 x 6mm. NO battery or charger supplied.
The Makita GA005GD201 XGT 40Vmax BL Grindercomes with the following: 2 x 40V 2.5Ah Li-ion XGT 40Vmax Batteries.1 x DC40RA XGT 40Vmax Battery Charger.1 x Side Handle.1 x Lock Nut Wrench.1 x A-80656 Grinding Wheel 125 x 6mm.1 x Type 4 MAKPAC Carry Case.
The Makita GA004GD201 XGT 40Vmax BL Angle Grinder is supplied with: 2 x 40V 2.5Ah Li-ion XGT 40Vmax Batteries.1 x DC40RA XGT 40Vmax Battery Charger.1 x Side Handle.1 x Lock Nut Wrench.1 x A-80640 Grinding Wheel 115 x 6mm.1 x ADP10 XGT to LXT Charger Adaptor.1 x Type 4 MAKPAC Carry Case.
The Makita FN001G XGT 40Vmax BL Brad Nailer for finishing work. Fitted with a brushless, maintenance-free and long-life motor. Its slim nose enables you to drive nails securely into groove of narrow baseboard. Whilst its compact, lightweight design increases manoeuvrability. It also features a built-in LED light with pre-glow and afterglow functions illuminates the work area. XPT (Extreme Protection Technology) provides improved dust and water resistance for operation in harsh job site conditions. The battery protection circuit protects against overloading, over-discharging and over-heating. Supplied with: 2 x 40V 2.5Ah Li-ion XGT 40Vmax Batteries.1 x DC40RA XGT 40Vmax Battery Charger.1 x Belt Hook.1 x Nose Adaptor S.1 x Hex Wrench.1 x Type 3 MAKPAC Carry Case. Specifications: Nail Length: 15, 20, 25, 30, 35, 40mm.Fastener Gauge: 18 Ga.Fastener Magazine Capacity: 100.Weight: 2.0kg.
The Makita EBH253L Petrol Line Trimmer has a MM4 4 stroke engine for low noise and clean exhaust emission. Electronic ignition provides faster start up. For comfort and easy handling, it has an ergonomic loop handle. Specifications: Engine Type: 4-Stroke, 24.5cc.Line Cutting Speed: 0-4,600/0-6,000/min.Cutting Width: 40cm.Fuel Tank Capacity: 0.5 litre.Weight: 5.9kg.
The Makita DUR369LZ LXT Line Trimmercomes as a Bare Unit, NO battery or charger. Supplied with: 1 x Shoulder Strap.1 x Band Assembly.1 x Plastic Blade 255mm.1 x Trimmer Head Cover.1 x 95-M10L Trimmer Head 2.4mm.1 x Socket Wrench 17mm.1x Hex Wrench 4mm.1 x Accessory Bag.1 x Cutter Blade 255mm.
The Makita DUR369LPG2 LXT Line Trimmer is supplied with: 1 x Shoulder Strap.1 x Band Assembly.1 x Plastic Blade 255mm.1 x Trimmer Head Cover.1 x 95-M10L Trimmer Head 2.4mm.1 x Socket Wrench 17mm.1x Hex Wrench 4mm.1 x Accessory Bag.1 x Cutter Blade 255mm.2 x 18V 6.0Ah Li-ion Batteries.1 x 14.4/18V DC18RD LXT Twin Port Battery Charger.
The Makita DUR369APG2 LXT BL Brush Cutter comes as a Bare Unit, NO battery or charger. Supplied with: 1 x Band Assembly.1 x Plastic Blade 255mm.1 x Trimmer Head Cover.1 x 95-M10L Trimmer Head 2.4mm.1 x Socket Wrench 17mm.1x Hex Wrench 4mm.1 x Accessory Bag.1 x Cutter Blade 255mm.
The Makita DUR369APG2 LXT BL Brush Cutter is supplied with: 1 x Band Assembly.1 x Plastic Blade 255mm.1 x Trimmer Head Cover.1 x 95-M10L Trimmer Head 2.4mm.1 x Socket Wrench 17mm.1x Hex Wrench 4mm.1 x Accessory Bag.1 x Cutter Blade 255mm.2 x 18V 6.0Ah Li-ion Batteries.1 x 14.4/18V DC18RD LXT Twin Port Battery Charger.
Makita DUC254Z BL LXT Chainsaw comes with a high chain speed for pruning and carving. Equipped with a maintenance-free brushless motor. A torque boost mode enables the cutting of thick branches by temporarily boosting current limiter. Its lightweight and design with top handle makes it easy to use. The battery protection system automatically shuts off power when the battery level is low. Only approved for commercial users with special training. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Bar Length: 25cm.Chain Speed: 24m/s.Chain: Gauge: 0.043in.Chain Pitch: 3/8in.Chain Oil Tank: 0.14 litre.
Makita DUB187 LXT BL Blower Vacuum with variable speed control by trigger plus Cruise control. Easy to operate with a single action lever for blower/vacuum mode selection. There is also a lock-on button for continuous operation. Its lightweight design incorporates two casters for easy manoeuvring. The soft grip provides increased comfort on the job.A battery protection system automatically shuts off power when the battery level is low. Comes as a Bare Unit, NO battery or charger supplied. Specifications: No Load Speed: 9,000-13,500/min.Max. Air Velocity: 64 m/s.Air Volume: 4.2 m³/min.Max. Sealed Suction: 33 mbar.Weight: 3.3kg.
Makita DTR181 LXT Rebar Tying Tool for tying underfloor heating cables and rebars. Its also compatible with thick rebars (D22 x D25). Easy-to-use, single-handed operation allows positioning of rebars. Tie wire reel can be replaced simply by opening the reel cover. Fitted with a brushless motor which is maintenance-free and provides long-life. A battery protection system automatically shuts off power when the battery level is low. With XPT (Extreme Protection Technology), engineered for improved dust and water resistance for operation in harsh job site conditions. Comes as a Bare Unit, NO battery or charger supplied.
Makita DTR180 LXT Rebar Tying Tool produced for rebars and underfloor heating cables. Easy-to-use, single-handed operation allows positioning of rebars. The strength of tying can be adjusted between 1 and 6, depending on the material. Fitted with a brushless motor which is maintenance-free and provides long-life. A battery protection system automatically shuts off power when the battery level is low. With XPT (Extreme Protection Technology), engineered for improved dust and water resistance for operation in harsh job site conditions. Comes as a Bare Unit, NO battery or charger supplied.
Makita DSC102 LXT Threaded Rod Cutter provides for spark-free and neat cutting of steel rods. Generates burr-free cuts allow for easy nut tightening. Fitted with a brushless motor maintenance-free and provides long motor life. A battery protection system automatically shuts off power when the battery level is low. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Cutting Capacity: Mild Steel (up to 400N/mm²): M6 - M10 mm.Stainless Steel (up to 600N/mm²): M6 - M8 mm.
The Makita DPT353RTJ LXT Pin Nailer is supplied with: 2 x 18V 5.0Ah Li-ion Batteries.1 x DC18RC LXT Li-ion Battery Charger.1 x Truss Head Screw.1 x Belt Hook.1 x Nose Adaptor.1 x Hex Wrench.1 x MAKPAC Type 2 Case.
Makita DPB180 LXT Portable Band Saw for spark-free cutting of metal. This lightweight saw is easily portable, ideal for cutting pipes and fibre-reinforced hoses. A variable speed control dial enables you to match the speed to the application. Whilst the electronic current limiter provides overload protection. Fitted with an ergonomically designed handle, the rubber coating on the handle ensures a firm working grip. Bumpers protects the tool body when putting down on the floor. A battery protection system automatically shuts off power when the battery level is low. It also features an LED job light, ideal when working in dark spaces. Supplied with: 1 x Hex Key, 2 x 18V 5.0Ah Li-ion Batteries, 1 x 7.2-18V DC18RC LXT Li-ion Battery Charger and 1 x Carry Case. Specifications: No Load Speed: 1.4 - 2.7m/s.Cutting Capacity: Mild Steel (up to 400N/mm²):120 x 120mm.Max. Log Diameter:120mm.Blade Dimensions: 13 x 0.5 x 1140mm.
The Makita DMR116 Job Site Radio comes with easy to read digital tuner and LCD display. Runs on both an AC adaptor and Makita Li-ion batteries. Its compact and lightweight design incorporates a carry handle for easy transportation. IP64 rated for water and dust resistance, suitable usage on job sites. There is also an AUX input. Compatible with all Makita 14.4-18V Li-ion batteries and 14.4V/18V G-batteries. Comes as a Bare Unit, No Battery or Charger. Specifications: Frequency Range: AM 522 - 1710 kHz, FM 87.5 - 108 MHz.Battery: Type Lithium-ion, Range 14.4-18V.Weight: 4.1kg.
The Makita DMP181 LXT Inflator for inflating tyres of cars and bicycles, sport balls, and more. With 3 inflation modes (High speed, Low speed or Ball modes). It has a digital pressure gauge with added convenient functions. The machine stops automatically when target pressure is reached. It also remembers the pressure setting last time you power off. Excess air can be released by pressing and holding the air release button. A battery protection circuit protects against overloading, over-discharging and over-heating. Supplied with: 1 x Swim Ring Adaptor, 1 x French Adaptor, 1 x Dunlop Adaptor and 1 x British Adaptor. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Max. Flow Rate: 22 L/min.Max. Pressure: 11.1 bar.Hose Length: 0.65m.
Makita DML808 LXT LED Torch with a single LED provides 190 lumens. 40% higher illuminance than the DML802. Fitted with an ergonomically designed handle, the soft grip provides increased comfort on the job and ensures a firm working grip. A battery protection system automatically shuts off power when the battery level is low. Specifications: Max. Light Output: 190 lumens.LED Wattage: 4.9W.Dimensions: 280 x 79 x 119mm.
The Makita DML801 LXT LED Flashlight has 12 extra bright LED'S providing up to 240 lumens. Its head folds up and down with 7 positive stops and rotates left to right for multiple lighting angles. The rubber coating on the handle ensures a firm working grip. A battery protection system automatically shuts off power when the battery level is low. Can be powered by Makita 14.4V or 18V Li-ion Batteries. Comes as a Bare Unit, NO Battery or Charger Supplied. Specification: Max. Light Output: 120/240 lumens.
The Makita DLX2025T LXT Combo Kit, contains the following: 1 x 18V DHP453 LXT Combi Drill has a single sleeve keyless drill chuck for easy bit installation/removal. The 2-speed gear box features metal gears for increased durability. No Load Speed: 0-400/0-1,300/min.Impact Rate: 0-6,000/0-19,500/bpm.Max. Torque: 42Nm, Settings: 16 + Drill.Capacity: Masonry 13mm, Steel 13mm, Wood 36mm.Weight: 1.7kg. 1 x 18V DHR202 SDS Plus LXT Rotary Hammer Drill is capable of drilling through steel, wood and masonry with ease. The chisel can rotate a full 360° with 40 different locking positions. With 3-modes of operation: Rotary drilling, Hammer drilling or Chiseling. No Load Speed: 0-1,100/min.Impact Rate: 0-4,000/bpm.Impact Energy: 2.0 joules.Capacity: Concrete 20mm, Steel 13mm, Wood 26mm.Weight: 3.2kg. 1 x 14.4-18V DC18RC Compact Li-Ion Charger has a built-in cooling fan system blows cool air into the battery, which keeps the battery cool during the charging process. This helps to extend the overall battery life and accelerate the charging process. Has 3 active charging colours to help identify when the battery is charged, and to what level. Also supplied with 2 x 18V BL1850 5.0Ah Li-Ion Batteries and 1 x Tool Bag.
The Makita DLM481Z Self-Propelled Lawn Mower comes as a bare unit, NO battery or charger. Supplied with: 1 x Mulching Plug.1 x Rod 6mm.1 x Socket Wrench.
The Makita DLM481CT2 Self-Propelled Lawn Mower is supplied with: 1 x Mulching Plug.1 x Rod 6mm.1 x Socket Wrench.2 x 18V 5.0Ah Li-ion Batteries.1 x DC18SH LXT Dual Port Battery Charger.
The Makita DLM330Z LXT Lawnmower comes as a bare unit, NO battery or charger.DLM330 is optimal in places where you need the ability to turn in small radius. The Plastic cutting deck allows for lightweight design to increase maneuverability in turns, preparation, storage and more. 3 in 1 (Cutting / Collecting / Mulching) usaSupplied with:1 x Blade 330mm x 2 Tooth.1 x Wrench.User benefits
Soft start for smooth start-ups
Low noise level suitable for use in residential areas and public spaces
Compact storage of grass catcher allows for space-saving vertical storage
Electric brake for maximum productivity and increased operator safety
Battery protection circuit protects against overloading, over-discharging and over-heating
2-tooth blade for both cutting and mulching
3 in 1 (Mowing / Grass collecting / Mulching)
Plastic cutting deck allows for lightweight design to increase manoeuvrability in turns, preparation, storage and more
The Makita DKT360 LXT Kettle is powered by 2 x 18V Li-ion batteries in series (NOT supplied).Ideal for boiling water in location without AC power.Equipped with an anti-spill lock button to minimise accidental spilling of hot water. It also features auto shut-off after boiling with a warning buzzer. Comes as a Bare Unit, NO Battery or Charger supplied. Specification: Capacity: 800ml.
The Makita DK0176G205 40Vmax Twin Pack contains the following: 1 x 40V HP001G XGT 40Vmax Brushless Combi Drill with 2 mechanical gears, trigger controlled variable speed, and both forward and reverse rotation. A digital display provides visual confirmation of the selected torque. Provides excellent performance in continuous heavy-duty applications. Active Feedback Sensing Technology (AFT): Shuts down the tool if the rotation speed suddenly slows down. Chuck: 13mm Keyless.No Load Speed: 0-650/0-2,600/min.Impact Rate: 0-9,750/0-39,000/bpm.Torque: 68Nm/140Nm, Settings: 21/41.Capacity: Concrete/Metal 20mm, Wood 76mm.Weight: 3.0kg. 1 x 40V TD003G XGT 40Vmax Brushless Impact Driver with 4 modes of impact power selection:Max./ Hard/ Med./ Soft for bolt) and 1 T-mode for thin metal only. The rubber grip on the handle ensures a good working grip. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-3,700/3,200/2,100/1,100/min.Impact Rate: 0-4,100/3,600/2,600/1,400/bpm.Max. Torque: 210/170/50/20Nm.Tightening Capacity: Standard BoltM5 - M16. Also supplied with 2 x 40V 2.5Ah Li-ion XGT 40Vmax Batteries, 1 x DC40RA XGT® Fast Li-ion Charger 240V and1 x Type 3 MAKPAC Connector Case.
The Makita DJS161RTJ LXT Metal Shear is supplied with: 2 x 18V 5.0Ah Li-ion Batteries.1 x DC18RC LXT Li-ion Battery Charger.1 x Hex Wrench.1 x MAKPAC Type 2 Case.
The Makita DHP481 LXT Combi Drill has a brushless BLDC motor enabling up to twice the run-time of traditional motors. Extreme protection technology (XPT), protects the motor from dust, debris and liquids, providing optimal performance in extreme conditions. Fitted with a soft grip handle and a twin LED job light with afterglow.Comes as a Bare Unit, NO battery or charger supplied. Specifications: Chuck: 13mm Keyless.No Load Speed: 0-500/0-2,100/min.Impact Rate: 0-8,250/0-31,500/bpm.Max. Torque: 60Nm, Settings: 21 + Drill.Capacity: Concrete 16mm, Metal 13mm, Wood 76mm.
The Makita DFR551RTJ LXT Auto Feed Screwdriver is supplied with: 2 x 18V 5.0Ah Li-ion Batteries.1 x DC18RC LXT Li-ion Battery Charger.1 x Truss Head Screw.1 x Belt Hook.1 x MAKPAC Type 3 Case.
