The Makita D-40559 SDS Max Chisel Set is designed for use with SDS Max Hammer Drills. The chisels are extremely resistant to wear and deformation. Ideal for demolition, removing render, lifting floor tiles etc. Supplied in a durable aluminium carry case with the following: 2 x Bull Points: 300, 400mm2 x Cold Chisels: 300, 400mm
The Makita D-30667 Bit Set Counter Display contains 12 x D-30667 Bit Sets, 31 Piece. 31 Piece D-30667 Bit Set supplied in a handy-sized plastic case with a belt clip. Contains: 7 x 25mm Phillips Bits: PH1(x2), PH2(x4) and PH38 x 25mm Pozidriv Bits: PZ1(x2), PZ2(x5) and PZ312 x 25mm TORX Bits: TX10(x2), TX15(x2), TX20(x2), TX25(x3), TX30(x2) and TX403 x 25mm Slotted Bits: 4, 5.5 and 6.5mm1 x Quick-Release Bit Holder
Makita 17 piece SDS Plus Drill Bit Set provides a good cutting performance for concrete, demolition, render, chasing and fixings. Contains the following: 12 x SDS Plus Chisel Bits: 5 x 110, 5.5 x 110, 6 x 110, 6 x 160, 7 x 160, 8 x 110, 8 x 160, 8 x 210, 10 x 110, 10 x 160, 10 x 210, 14 x 260mm 2 x Bull Points: 140, 260mm 2 x Cold Chisels: 20 x 140, 20 x 250mm 1 x Scaling Chisel: 40 x 250mm
The Makita D-08757 4 Piece SDS-Plus Chisel Assortment contains a selection suitable for concrete, demolition, render and chasing applications. These cold chisels have been forged and tempered for increased durability. Supplied in a carry case, allowing you keep all your cold chisels together and prevent unnecessary damage. Contains: 2 x 250mm Bull Point Cold Chisels.1 x 250mm Flat Cold Chisel.
The Makita CLX228AJ 12Vmax CXT Twin Pack contains the following: 1 x 12V HP333D 12Vmax CXT Combi Drill with 2 mechanical gears and a variable speed control trigger with both forward and reverse rotation. Fitted with an ergonomic soft grip and keyless chuck. For added user safety there is an electric brake. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. No Load Speed: 0-450/0-1,700/min.Impact Rate: 0-6,750/0-25,500/bpmMax. Torque: 30Nm, Settings: 20 + DrillDrilling Capacity: Wood 21mm, Steel 10mm, Masonry 8mmWeight: 1.2kg 1 x 12V TD110D 12Vmax CXT Impact Driver features increased motor power for higher application speed and max. tightening torque. Variable speed trigger with forward/reverse operation for increased control. Fitted with an ergonomic soft grip and an LED job light. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,600/min.Impact Rate: 0-3,500/bpmMax Torque: 110NmCapacity: Bolt: Standard M5-M12, High Tensile M5-M10Coarse Thread Length Capacity: 22-90mmWeight: 1.2kg 1 x 12V DC10WD 12Vmax Standard Charger with charging status indicator and multi-contact slide type terminal. It has a compact, lightweight design that can also be wall mounted if desired. Also Supplied with: 2 x 12V 2.0Ah Li-ion Batteries and 1 x Type 4 MAKPAC Connector Case.
The Makita CLX224AJ 12Vmax CXT Twin Pack contains the following: 1 x 12V DF333D 12Vmax CXT Drill Driver with 2 mechanical gears and a variable speed control trigger. Fitted with an ergonomic soft grip and keyless chuck. For added user safety there is an electric brake. Chuck: 0.8-10mm KeylessNo Load Speed: 0-450/0-1,700/min.Max. Torque: 30Nm, Settings: 20 + DrillDrilling Capacity: Wood 21mm, Steel 10mmWeight: 1.2kg 1 x 12V TD110D 12Vmax CXT Impact Driver features increased motor power for higher application speed and max. tightening torque. Variable speed trigger with forward/reverse operation for increased control. Fitted with an ergonomic soft grip and an LED job light. Equipped with a battery protection circuit: designed to protect the battery from damages due to overdischarge, high temperature or overload current. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,600/min.Impact Rate: 0-3,500/bpmMax Torque: 110NmCapacity: Bolt: Standard M5-M12, High Tensile M5-M10Coarse Thread Length Capacity: 22-90mmWeight: 1.2kg 1 x 12V DC10WD 12Vmax Standard Charger with charging status indicator and multi-contact slide type terminal. It has a compact, lightweight design that can also be wall mounted if desired. Also Supplied with: 2 x 12V 2.0Ah Li-ion Batteries and 1 x Type 1 MAKPAC Connector Case.
The Makita B-53811 Drill & Screwdriver Bit Accessory Set includes a wide variety of the most commonly used power tool accessories within the building industry. It also includes a tic-tac container which can be removed from the case and carried in a pocket for added convenience. Contains: 25 x 25mm PZ2 Bits in a Tic-Tac Tub 7 x 25mm Phillips Bits: PH1(2), PH2(3), PH3(2)15 x Pozi Bits: PZ1(2), PZ2(11), PZ3(2)4 x 25mm Slotted Bits: 4, 4.5, 5, 7mm6 x TORX Bits: TX10, TX15, TX20, TX25, TX30, TX404 x Hex Bits: 4, 5, 6, 7mm 5 x 50mm Phillips Bits: PH1, PH2(3), PH35 x 50mm Pozi Bits: PZ1, PZ2(3), PZ32 x 50mm TORX Bits: TX20, TX30 1 x Magnetic Bit Holder1 x Countersink 2 x Holesaws: 32, 38mm1 x Holesaw Arbor 3 x Nut Drivers: 6, 8, 10mm 2 x Flat Wood Bits: 12, 16mm 6 x HSS drill Bits: 2, 3(2), 4, 5, 6mm 7 x 3-Point Wood Drill Bits: 3(2), 4, 5(2), 6, 8mm 4 x Masonry Drill Bits: 6(2), 7, 8mm
The Makita B-28606-10 Screw Bit Set 37 Piece contains the following: 5 x 25mm Pozidriv Bits: PZ0, PZ1, PZ2 (x2) and PZ3.5 x 25mm Phillips Bits: PH0, PH1, PH2 (x2) and PH3.4 x 25mm Hex Bits: H3, H4, H5 and H6.11 x 25mm Torx Bits: T10, T15(x2), T20(x2), T25(x2), T27, T30(x2) and T40.7 x 25mm Tamper Proof Torx Bits: T10H, T15H, T20H, T25H, T27H, T30H and T40H.4 x Slotted Bits: SL0.5 x 4, SL0.6 x 4.5, SL1.0 x 5.5 and SL1.2 x 6.5.1 x 1/4in Hex Shank 60mm Magnetic Holder.
Makita PCD Circular Saw Blade is designed to cut fibre cement board including Hardie board, Marley weatherboard and compressed concrete, one of the fastest-growing, environmentally friendly materials in the construction industry. Polycrystalline diamond tipped teeth provide increased durability and longer life. Smoother, cleaner and more accurate cutting. Delivers outstanding performance results when compared to a TCT blade or Diamond Continuous blade. Specification: Blade Diameter: 165mmBore: 20mmKerf: 2.1mmRake: 10°Thickness: 1.4mmTooth Count: 4
The Makita Abrasive Chop Saw Wheels offer a superb combination of long life and high cutting speed. Applications include Chop saws, Metal cutting, Fabrication, Sheet metal. Specially designed disc for the Makita range of bench cut-off saws, incorporates carefully selected grit particles and optimum reinforcement. Diemeter: 355mm.Bore: 25.4mm.Thickness: 3mm.
The Makita B-10615 Circular Saw Blade made especially for use with cordless saws. Precision honed tungsten teeth, ideal for fast cuts in mild steel. Specification: Blade Diameter: 136mmBore: 20mmKerf: 1.5mmTeeth: 30TMax. Speed: 4,500/min.
The Makita B-09298 Specialized Plunge Saw Blade designed specifically for use with Plunge type saws. With patented technology dampening vibration. The low vibration blades run truer with less wobble easily plunging into material with little effort. Ideal for all applications in wood. Specification: Blade Diameter: 165mmBore: 20mmKerf: 2.2mmRake: 8ºThickness: 1.6mmTooth Count: 48
The Makita B-08894 Mitre Saw Blade is suitable for use with mains and battery powered mitre saws. The fully hardened and tensioned blades absorb impact whilst remaining flat and true. Made from high-grade tungsten carbide with precision honed tips for extended blade life. The thin kerf provides reduced motor pressure. Ideal for all applications in wood, cross and rip cutting, joinery etc. Specification: Blade Diameter: 190mmBore: 20mmKerf: 2.2mmRake: 5ºThickness: 1.6mmTooth Count: 24
The Makita B-07967 MForce™ Portable Saw Blade has the following specification: Blade Diameter: 190mmBore: 20mmKerf: 2mmRake: 15ºThickness: 1.2mmTooth Count: 12
The Makita B-07901 MForce Portable Saw Blade has the following specification: Blade Diameter: 165mmBore: 20mmKerf: 2mmRake: 15ºThickness: 1.2mmTooth Count: 16
