The Makita DTW450 1/2in Impact Wrench has a compact, lightweight design and a powerful 4 pole motor. Fitted with a forward and reverse rocker switch trigger. The body features rubber joint construction for minimum battery failure. Fitted with an ergonomic soft grip, ideal for prolonged use and less user fatigue. There is also an LED job light with afterglow for working in dark spaces. Comes as a Bare Unit, No Battery or Charger Specification Bit Holder: 1/2in SquareNo Load Speed: 1,600/min.Impact Rate: 2,200/bpmMax. Torque: 440NmWeight: 3.4kg All vibration figures quoted are Tri-axial to EN60745 2006. Noise Sound Pressure: 94 dB(A).Noise Sound Power: 105 dB(A).Noise K Factor: 3 dB(A).Vibration: Fastening Bolt: 19 m/sec².Vibration K Factor: 1.5 m/sec².
The Makita DTW190 LXT Impact Wrench features an 1/2 inch square drive shank that takes standard impact sockets. Offers forward/reverse rotation with a variable speed control trigger for increased control. The ergonomically designed handle with rubberised soft grip fits your hand perfectly to provide maximum control and comfort. Equipped with Battery protection circuit which is designed to protect the battery from damages due to overdischarge, high temperature or overload current. Comes as a Bare Unit, No Battery or Charger. Specification: Bit Holder: 1/2in SquareNo Load Speed: 0-2,3000/min.Impacts Per Min: 0-3,000/bpmMax. Torque: 190NmCapacity: Bolt: Standard M8-M16, High Tensile M8-M12Weight: 1.7kg
The Makita DTW1001 Brushless 3/4in Impact Wrench offers an extra high tightening torque of 1000Nm thanks to its high-powered, brushless motor and newly designed impact mechanism. It is equipped with twin LED job lights with pre-glow and afterglow function for working in dark areas and 3-stage impact power selection. This reduces fault tightening, you can suit the material of the workpiece or the screw at a push of a button. Comes as a Bare Unit, No Battery or Charger. Specification: Bit Holder: 3/4in SquareNo Load Speed: 900/1,000/0-1,800/min.Impact Rate: 0-1,800/0-2,000/0-2,200/bpmMax. Fastening Torque: 1,050NmNut Busting Torque: 1,700NmCapacity: Standard Bolt M12-M30, High Tensile Bolt M10-M24
The Makita DTM51ZJX7 Multi-Tool is supplied with: 1 x Adaptor, 1 x Segment Saw Blade, 5 x 60 Grit Abrasive Paper, 5 x 80 Grit Abrasive Paper, 5 x 120 Grit Abrasive Paper, 5 x 180 Grit Abrasive Paper, 1 x Sanding Pad and 1 x MAKPAC case. Bare Unit, No Battery or Charger Supplied
The Makita DTD157 LXT Impact Driver has a powerful brushless motor and electronic 2-speed impact power selection. Variable speed is controlled via a trigger. It also has an assist mode for controlled screwdriving. Fitted with an ergonomically designed high comfort grip. There is also an electric brake and an LED job light. Supplied as a Bare Unit - No Battery or Charger. Specification: Driving Shank: 6.35mm (1/4in)No Load Speed: 0-1,300/0-3,000/min.Impact Rate: 0-2,000/0-4,100/bpmMax. Fastening Torque: 140NmCapacity: Bolt: Standard M5-M14, High Tensile M5-M12Machine Screw: M4-M8Coarse Thread: 22-90mmWeight: 1.2kg
The Makita DTD153 Brushless Impact Driver is fitted with an energy efficient brushless motor that uses less energy and provides a longer run time. Speed is controlled via the variable speed trigger and features forward/reverse rotation. Fitted with a one touch sliding chuck for easy bit installation and removal. Its ergonomically designed soft grip handle increases comfort and reduces fatigue. Other features include a built-in twin job light and belt clip. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 0-3,400/min.Impact Rate: 0-3,600/bpmMax. Torque: 170NmCapacity: Machine Screw M4-M8, Standard Bolt M5-M16, High Tensile Bolt M5-M14Coarse Thread Length Capacity: 22-125mmWeight: 1.3kg
The Makita DST221 LXT Stapler has a machined aluminium magazine that provides precision and durability to ensure smooth staple loading and feeding, also allowing for the use of commercial staples. There is a useful window for a clear view of the remaining staples. Fitted with a single trigger switch and a rubberised soft grip for increased comfort and control. 4-stage depth control for precise staple driving. Comes as a Bare Unit, No Battery or Charger. Specification: Staple Length/Gauge: 0.6 x 1.2mmMagazine Capacity: 98Staple Range: 10, 13, 16, 19 and 22mmStaple Width: 10mmWeight 2.1kg
The Makita DST112 10mm Cordless Stapler is fitted with an ergonomically designed handle and rubberised soft grip providing more comfort and control, while minimising hand fatigue. With a compact, lightweight design with a plastic magazine case with a staple window to check remaining staples. Offers both sequential and bump firing with a trigger lock to prevent fatigue during long work periods. For increased safety it is fitted with an anti-dry-fire mechanism and an LED job light for illuminating dark work spaces. Comes as a Bare Unit, No Battery or Charger. Specification: Staple Magazine Capacity: 150.Staple Range: 7-10mm.Staple Length/Gauge: 0.5 x 0.7mm.Staple Width: 10mm.Weight: 1.8kg.
Makita DSS501Z LXT Circular Saw with a compact, lightweight design for high manoeuvrability and easy handling. Its enhanced motor delivers a smooth, powerful cutting performance. A double safety trigger and electronic brake provide increased user safety. Its rubberised soft grip handle provides increased comfort. The rear and front handle are positioned in line with the saw cut line, so little effort is required when guiding the saw through the material being cut. A built-in blow-off nozzle keeps the cutting line free of debris. There is also an LED job light to help you see your cutting line and a removable dust nozzle. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 3,600/min.Depth of Cut: @90°: 51mm, @45º: 35mmBlade: 136 x 20mm BoreWeight: 2.4kg
The Makita DRV250Z Brushless LXT Rivet Gun offers high-speed tightening. It has a handy, rivet holding mechanism, so the rivet is held in place and will not drop out even when the tool is directed downward. It has an electric brake for increased safety and an LED job light, ideal for illuminating the work surface when working in darker spaces. Fitted with a transparent container for spent mandrels. Compatible with various sizes of blind rivets. Supplied with a wide range of nose pieces and jaw pushers for tightening various sizes of blind rivets. Comes as a Bare Unit, No Battery or Charger. Specification: Rivet Diameter: 4.8-6.4mmStroke: 30mmPulling Force: 20 kNWeight: 2.4kg
The Makita DRV150Z LXT Brushless Rivet Gun offers high-speed tightening. It has a handy, rivet holding mechanism, so the rivet is held in place and will not drop out even when the tool is directed downward. It has an electric brake for increased safety and an LED job light, ideal for illuminating the work surface when working in darker spaces. Fitted with a transparent container for spent mandrels. Compatible with various sizes of blind rivets. Supplied with a wide range of nose pieces and jaw pushers for tightening various sizes of blind rivets. Comes as a Bare Unit, No Battery or Charger. Specification: Rivet Diameter: 2.4-4.8mmStroke: 25mmPulling Force: 10 kNWeight: 1.9kg
The Makita DRT50 Brushless LXT Router/Trimmer has been engineered for a full range of cabinetry and woodworking applications. Fitted with a variable speed control dial, to match the speed to the application; electronic speed control, to maintain constant speed under load and soft start feature for smoother start-ups. It has an aluminium housing and base for increased durability and accuracy. The smooth fine depth adjustment system provides more precise settings and there is a shaft lock for easy installation and removal of trimmer bit. Supplied with: 1 x Trimmer Guide, 1 x Laminate Trimmer Base, 1 x Straight Guide, 1 x 10mm Template Guide Bush, 2 x Collet Cones: 6.35mm, 8mm, 1 x Trimmer Base Dust Nozzle and 2 x Hex Wrenches. Comes as a Bare Unit, No Battery or Charger. Specification: Collet Chuck Capacity: 6mm(1/4in) or 8mm (3/8in)No Load Speed: 10,000-30,000/min.Plunge Capacity (Trimmer Base): 0-40mmOverall Length: 226mmWeight: 2.1kg
The Makita DPO600 Brushless Random Orbit Polisher has 2-modes of operation: Normal Mode: orbital action with forced rotation of the pad for rough polishing such as surface treatment; Finishing Mode: orbital action with free rotation of the pad for fine polishing. Whilst the soft start feature provides increased safety and control. There is also a lock-on function and ergonomic soft grip for reduced fatigue during long periods of operation. The tool can be rested upside down without damaging the workpiece, thanks to elastomer bumpers. Comes as a Bare Unit, No Battery or Charger. Specification: Oscillating Speed (Normal/Finishing Mode): 0-6,800/0-5,200/min.Strokes Per Minute (Normal/Finishing Mode): 0-13,600/0-10,400/spmOrbit Diameter: 5.5mmMax. Polishing Pad Diameter: 150mmWeight: 3.1kg
The Makita DPJ180 LXT Biscuit Jointer has a compact, lightweight design with an easy-to-grip slim motor housing. Fitted with an angle adjustable fence that has positive stops at 0º, 45º and 90º. There are also 6 preset cutting depths. The anti-restart function and electronic current limiter, both with a warning lamp, provide additional safety. A shaft lock provides easy blade change. The dust nozzle is rotatable for easy connection to dust extraction. Comes as a Bare Unit, No Battery or Charger. Specification: No Load Speed: 6,500/min.Blade: Diameter 100mm, Thickness 4mmHole Diameter: 22mmWeight 2.8kg
The Makita DPB182 LXT Band Saw has a highly rigid aluminium structure that offers stable cutting. With easy blade track adjustment, simply by turning the screw. Ideal for cutting conduit, copper pipe, threaded rod, angle iron and channel. Tool-less blade change for easy blade change and less downtime. Compact and lightweight design allows for excellent manoeuvrability in horizontal and overhead applications. Its easy grip handle is covered with an anti-slip elastomer surface. A wheel cover encloses the blade outside the cutting area making the saw suitable for one-handed operation. Equipped with Battery Protection Circuit: designed to protect the battery from damages due to over-discharge, high temperature or overload current. There is also an LED job light, ideal for working in dark areas. Comes as a Bare Unit, No Battery or Charger. Specification: Blade Speed: 0-3.2m/sec.Capacity: Round Pipe 64mm, Square Pipe 64mm²Blade Length x Width: 835 x 13mm
The Makita DMR203 Bluetooth® Jobsite Speaker runs on both an AC adaptor and Makita Li-ion batteries. True Wireless Stereo (TWS) technology allows the user to wirelessly pair two DMR203 speakers via Bluetooth® to enjoy a deep, rich and powerful stereo sound. There are six selectable sound modes to suit the music genre and the My Equaliser (MY EQ) mode enables the user to independently adjust treble, midrange and bass for a desired sound quality. TWS technology also allows up to ten DMR203 speakers to be paired and connected to one mobile device to play the same sound simultaneously. Equipped with Bluetooth® Version 5.0 Class 2, to wirelessly connect to your mobile device for playing music with a range up to 10m. A colour LCD panel shows song title, artist name etc. It has an IP65 rated dust and showerproof construction. The storage compartment allows you to charge your mobile device while being stored. The speaker has a flat anti-slip top surface and its elastomer bumpers protect against rough handling on a jobsite. Supplied with a carry handle for easy transport. Not compatible with G-Series Battery, NiCAD or NiMH Batteries. Comes as a Bare Unit, No Battery or Charger. Specification: Range: FM 87.5-108MHz, AM 522-1629kHzBattery Type: Lithium-ionBattery Range: 10.8-18VWeight: 3.4kg
The Makita DMP180Z LXT Cordless Inflator comes as a bare unit, NO battery or charger. Supplied with: 1 x British Adaptor, 1 x Swim Ring Adaptor, 1 x French Adaptor, 1 x Ball Adaptor.
The Makita DMP180RT1J LXT Cordless Inflator is supplied with: 1 x 18V 5.0Ah Li-ion Battery, 1 x Sports Ball Needle Adaptor, 1 x Tapered Adaptor, 1 x English Valve Adaptor, 1 x American Valve Adaptor, 1 x French Valve Adaptor, 1 x Charger and 1 x MAKPAC Type 2 Connector Case.
The Makita DML806 LXT LED Li-ion Torch has three light modes: 360° lantern, 180° lantern, or flashlight. The 180°-360° lantern lighting allows the user to select between the entire work area or specific task illumination. It has a compact, ergonomic design with a metal hang hook, it swivels 360° and folds away for easy storage. The rubberised soft grip provides increased comfort on the job. Specification: Max. Light Output: Flashlight 90 lumens, 180° Lantern 310 lumens, 360° Lantern 620 lumensRun Time with 18V 5.0Ah Li-ion Battery: Flashlight 59 hours, 180° 21 hours, 360° 11 hoursWeight: 1.1kg
The Makita DLX2372TJ Twin Pack contains the following: 1 x 18V DHR242 SDS Plus Hammer Drill has an efficient brushless DC motor that provides higher productivity and a slide chuck for quick and easy SDS Plus bit changes. It offers 3 modes of operation: rotation and hammering, hammering only and rotation only. The unique joint construction suppresses the transmission of vibration to the battery terminals, minimising battery failures. No Load Speed: 0-950/min.Impact Rate: 0-4,700/bpmImpact Energy: 2 joulesCapacity: Concrete 24mm, Steel 13mm, Wood 27mm 1 x 18V DTW300 Brushless LXT Impact Wrench for use in automotive, installation and fabrication trades. Precise fastening control is achieved through the 4-speed power selection switch. Three forward and three reverse rotation auto-stop modes offer increased efficiency when the fastener is adequately loosened. The full-speed mode function reduces the trigger pull to reach full speed. Bit Holder: 12.7mm (1/2in)No Load Speed: 0-1,000/0-1,800/0-3,200/min.Impact Rate: 0-1,800/0-2,600/0-3,400/bpmMax. Torque: Fastening 330Nm, Nut Busting 580NmCapacity: High Tensile Bolt M10-M16, Standard Bolt M10-M20Weight: 1.5kg 1 x 14.4-18V DC18RC Compact Li-ion Charger has a built-in cooling fan system that blows cool air into the battery, keeping the battery cool during the charging process. This helps to extend the overall battery life and accelerate the charging process. With 3 active charging colours to help identify when the battery is charged, and to what level. Also supplied with: 2 x 18V BL1850 5.0Ah Li-ion Batteries and 1 x Type 4 MAKPAC Connector Case.
The Makita DLX2180TJ Brushless Twin Pack, contains the following: 1 x 18 Volt DHP484 Brushless Combi Drill is fitted with a powerful brushless motor, for increased runtime and power. It has an all metal gear construction with aluminium gear housing and 2 mechanical gears. Speed is controlled via the variable speed trigger and features forward/reverse rotation. The top back of the handle is ergonomically contoured and widened to perfectly fit the users hand. No Load Speed: 0-500/0-2,000/min.Blows Per Minute: 0-7,500/0-30,000/bpm.Torque Settings: 21 + drill.Max Torque Soft/Hard: 30/54Nm.Capacity: Wood: 38mm, Masonry: 13mm, Steel: 13mm.Weight: 1.8kg. 1 x 18 Volt DTD153 Brushless Impact Driver is fitted with an energy efficient brushless motor that uses less energy and provides a longer run time. Speed is controlled via the variable speed trigger and features forward/reverse rotation. Fitted with a one touch sliding chuck for easy bit installation and removal. Its ergonomically designed soft grip handle increases comfort and reduces fatigue. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-3,400/min.Impact Rate: 0-3,600/bpm.Max Torque: 170Nm.Capacity: Machine Screw: M4-M8, Standard Bolt: M5-M16, High Tensile Bolt: M5-M12Coarse Thread Length Capacity: 22-125mm. 1 x 14.4-18 Volt DC18RC Compact Li-ion Charger has a built-in cooling fan system that blows cool air into the battery, which keeps the battery cool during the charging process. This helps to extend the overall battery life and accelerate the charging process. Has 3 active charging colours to help identify when the battery is charged, and to what level. Also supplied with 2 x 18 Volt 5.0Ah Li-ion Batteries and 1 x Type 3 MAKPAC Connector Case.
The Makita DLX2145TJ LXT Twin Pack, contains the following: 1 x 18 Volt DHP458 LXT Combi Drill is an extremely compact tool with an overall length of only 225mm, the shortest in its class. It has enhanced dust and drip-proof performance for use in outdoor applications or harsh environments. The machine has a battery fuel gauge and a metal gear box for long life. It has two variable speeds, an electronic brake and an adjustable side handle for extra control during use. No Load Speed: 0-400/0-2,000/min.Blows per Minute: 0-6,000/0-30,000/bpm.Max Torque: 44/88Nm.Torque Settings: 21 + drill.Capacity: Wood: 65mm, Masonry: 16mm, Steel: 13mmWeight: 2.2kg. 1 x 18 Volt DTD152Z LXT Impact Driver has a compact design with an overall length of only 137mm. Although small it is packed with all metal gears and mechanical 2-speed control. The variable speed control trigger with forward/reverse rotation provides control, even in tough applications. It also has a soft grip handle that has been designed to maximise thrust right to the bit. With an electric brake for increased user safety and bright twin LED job lights for working in dark conditions. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-2,900/min.Impact Rate: 0-3,500/bpm.Max Torque: 165Nm.Capacity: Machine Screw: M4-M8, Standard Bolt: M5-M16, High Tensile Bolt: M5-M12Coarse Thread Length Capacity: 22-125mm. 1 x 14.4-18 Volt DC18RC Compact Li-Ion Charger has a built-in cooling fan system that blows cool air into the battery, which keeps the battery cool during the charging process. This helps to extend the overall battery life and accelerate the charging process. Has 3 active charging colours to help identify when the battery is charged, and to what level. Also supplied with 2 x 18 Volt BL1850 5.0Ah Li-Ion Batteries and 1 x Type 3 MAKPAC Connector Case.
The Makita DLX2137PTJ LXT Twin Pack contains the following: 1 x 18V DHP482 LXT Combi Drill is a compact and precise power tool for the professional or DIY enthusiast. It features an all-metal gear construction for extra high transmission durability. It also features an electric brake and variable speed control trigger. Extremely comfortable to use with its ergonomic soft grip handle and lightweight design. Chuck: 13mm KeylessNo Load Speed: 0-600/0-1,900/min.Impact Rate: 0-9,000/0-28,500/bpmMax. Torque: 62Nm, Settings: 21 + DrillCapacity: Concrete 13mm, Metal 13mm, Wood 38mmScrew Capacity: Machine Screw 6mm, Wood Screw 10 x 90mm 1 x 36V (2x18V) DHR263 Rotary SDS Hammer Drill offers 3-modes of operation: rotary only, hammer only and rotary hammer. It has a compact design that maintains easy handling and high manoeuvrability. No Load Speed: 0-1,200/min.Impact Rate: 0-4,800/bpmCapacity: Concrete 26mm, Steel 13mm, Wood 32mmWeight: 4.7kg 1 x 14.4-18V DC18RD Twin Port Charger is able to charge two Makita slide style Li-ion and NiMH batteries (with adaptor) at the same time, as fast as DC18RC charges one battery. It has a full charge sound alert and LED charging display. An electronic current limiter provides overload protection. Also supplied with: 4 x 18V 5.0Ah Li-ion Batteries, 1 x Type 3 MAKPAC Carry Case and 1 x Type 4 MAKPAC Carry Case.
The Makita DLX2131TJ Twin Pack contains the following: 1 x 18V DHP482 LXT Combi Drill is a compact and precise power tool for the professional or DIY enthusiast. It features an all-metal gear construction for extra high transmission durability. It also features an electric brake and variable speed control trigger. Extremely comfortable to use with its ergonomic, soft grip handle and lightweight design. Chuck: 13mm KeylessNo Load Speed: 0-600/0-1,900/min.Impact Rate: 0-9,000/0-28,500/bpmMax. Torque: 62Nm, Settings: 21 + DrillCapacity: Concrete 13mm, Metal 13mm, Wood 38mmScrew Capacity: Machine Screw 6mm, Wood Screw 10 x 90mm 1 x 18V DTD152 LXT Impact Driver with a compact design, all-metal gears and mechanical 2-speed control. The variable speed control trigger with forward/reverse rotation provides control, even in tough applications. It also has a soft grip handle that has been designed to maximise thrust right to the bit. With an electric brake for increased user safety and bright twin LED job lights for working in dark conditions. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-2,900/min.Impact Rate: 0-3,500/bpmMax. Torque: 165NmCapacity: Machine Screw M4-M8, Standard Bolt M5-M16, High Tensile Bolt M5-M12Coarse Thread Length Capacity: 22-125mm Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x 18V DC18RC Compact Charger and 1 x Type 3 MAKPAC Connector Case.
