The Faithfull Button hook-on Grease Nipples are case hardened and zinc plated for corrosion resistance.They conform to DIN 71412 and have a BSP thread. Supplied in packs of 5.Thread: 1/8in BSP
The Lumatic VSLGH Contractors Side Lever Grease Gun is suitable for 400cc cartridge loading or 500cc bulk. Complete with air release valve/European pattern bulk filler nipple, 6 inch rigid tube and 4 jaw hydraulic connector. Capacity: 400cc.
ROCOL MOISTURE GUARD Spray is a thin corrosion preventative film suitable for the temporary protection of components. The flexible film does not chip or crack, does not attract dirt or dust, and protects against condensation attack.1 x ROCOL MOISTURE GUARD Clear Spray 400ml
WD-40® Specialist Contact Cleaner is a fast drying product, that rapidly penetrates into hard to reach areas to clean oil, dirt, flux residue and condensation from sensitive electronics and electrical equipment, without leaving any residue. It is non conductive and safe to use on electrical equipment, components and contacts, plastic and rubber. Smartstraw application: Shake can thoroughly before use. Hold upright, and spray directly onto the tool and component. Size: 400ml
ROCOL WD Spray is a blend of refined mineral oil, designed for use as a multi-purpose product. It displaces water, provides light lubrication, penetrates corroded parts and leaves a light corrosion resistant film. Size: 300ml.
ROCOL SAPPHIRE® Hi-Pressure plain bearing grease has exceptional load carrying capabilities and contains molybdenum disulphide, used for the lubrication of plain bearings and slides. Temperature Range -20° to +150° NLGI No.2. Size: 400g.
The Lumatic Industrial Air Operated Continuous Flow Grease Gun has a unique 360° swivelling head providing ease of use. It has been designed for standard 400g grease cartridges (or 500g bulk fill). Comes with rigid tube, precision connector & UK standard air coupling. Pressure Ratio: 40:1.Recommended Air Pressure: 4-10 Bar.
This Scan spill Kit absorbs acid, solvents and strong chemicals. Absorbs up to 18 Litres. It contains high performance absorbent pads and socks and is ideal for laboratories and workshops. This kit includes 10 high performance absorbent pads (40 x 50 cm), 2 high performance absorbent socks (8 x 120 cm) and 1 disposal bag with tie.
The Scan Hand Sanitiser Gel Dispenser has a 1 litre refillable reservoir. Its press paddle design allows for easy dispensing. Supplied with wall fittings but sanitiser gel is not included.
This Scan Spill kit absorbs oil, fuel and solvents. Absorbs up to 18 litres. The kit contains high performance absorbent pads and socks and is ideal for vehicles and workshops. This kit includes 10 high performance absorbent pads (40 x 50cm), 2 high performance absorbent socks (8 x 120cm) and 1 disposal bag with tie.
This Scan Spill Kit absorbs coolant, oil, water, solvents and non-aggressive fluids. Asorbs up to 18 litres. The kit contains high performance absorbent pads and socks and is ideal in the plumbing trade for boiler leaks etc. This kit includes 10 high performance absorbent pads (40 x 50 cm), 2 high performance absorbent socks (8 x 120 cm) and 1 disposal bag with tie.
ROCOL SAPPHIRE® Aqua 2 Bearing Grease is a soap thickened grease designed to give superior resistance to water washout. Provides exceptional corrosion protection and long term lubrication for bearings operating in water or exposed to continual water washing. Temperature range of - 20°C to + 150°C.
Rocol RTD® Spray is an aerosol applied metal cutting lubricant, consisting of a concentrate of extreme pressure additives. When applied, it supplies a film of metal cutting fluid direct to the cutting zone. Suitable for use during machining operations and in areas where access is difficult. Size: 400ml.
ROCOL RTD® Liquid is a viscous high performance metal cutting lubricant. Containing extreme pressure additives, clinging to the tool and work piece, reducing friction and prolonging tool life. RTD® promotes superior workpiece surface finish on all ferrous and non-ferrous metals.1 x ROCOL RTD® Liquid Bottle 400g
The Faithfull Oil Suction Gun is designed for the easy removal and replacement of oil from sumps, gearboxes and axles on all types of machinery and vehicles. Black finish body with anti-slip bands. Steel body fitted with a 300mm flexible extractor tube to enable easy access to awkward locations. The suction gun is suitable for use with engine, differential and transmission oils. Complete with 300mm flexible extractor tube. Ideal for vehicle and machinery use. Capacity 500 ml (16 fl.oz).
Janitol Plus is a heavy-duty surface degreaser for removing ground-in dirt and burnt-on food deposits. It is a non-caustic, low odour liquid detergent for cleaning any surface without fear of damage. Supplied as a concentrate for diluting to the required strength, it readily mixes with water, has water softening capabilities and is free rinsing.
Standard hydraulic coupler to suit most greasing application, fitted with a spring loaded ball check mechanism to prevent pressure loss and four fully hardened spring steel jaws for a long service life. This product is for use with hand operated grease guns only with a working pressure of up to 6,000psi / 413 bar.Fits Faithfull grease guns FAI GGHD and FAI GGMP and flexible hoses FAI GGHOSE12 and FAI GGHOSE18.Suitable for use hand operated grease guns with a 1/8in BSPT thread and working pressure not exceeding 6,000psi / 413 bar.
Straight hydraulic grease nipple. Manufactured from high quality steel, case hardened and plated ZN3 zinc and clear. Head forms conform to DIN 71412Thread 3/8in UNF.
Straight hydraulic grease nipple. Manufactured from high quality steel, case hardened and plated ZN3 zinc and clear. Head forms conform to DIN 71412Thread 3/8in BSF.
Straight hydraulic grease nipple. Manufactured from high quality steel, case hardened and plated ZN3 zinc and clear. Head forms conform to DIN 71412Thread 5/16in BSF.
The Faithfull Heavy-Duty Piston Siphon Pump is designed to safely dispense liquids from containers ranging from 5L up to 205L drums. It is made from a non-corrosive PE material. Recommended for use with: kerosene, diesel, gasoline, water (not safe to drink), light oils, chemical insecticides, soaps, detergents, mild acids, antifreeze and liquid waxes. Specification: Total Length: 1150mmSuction Tube Length: 850mmDischarge Tube Length: 1200mm approx. Delivery Volume: 20LPM approx.
The Faithfull Straight Grease Nipples are case hardened and zinc plated for corrosion resistance.They conform to DIN 71412 and are available in common threads. Supplied in packs of 5.Thread: 5/16in BSF
