The Stabila LAR 160 Rotation Laser has a high levelling accuracy of ± 0.1mm/m, fast self-levelling within 20 seconds. Fully automatic with four laser functions: horizontal and vertical rotation, plumb line function and right angle (90°) in vertical operation. Easy to use, via three control buttons: on/off, tilt mode and manual mode. Covered with a shock-absorbent soft grip casing that provides protection against impacts whilst the stable housing cover protects the laser optics. Dustproof and waterproof to IP65. With two integrated 5/8in threads in the housing, for horizontal and vertical tripod use. Supplied with: 1 x BST-S Construction Tripod, 1 x NL Levelling Rod, 1 x REC 160 RG Receiver, 1 x Laser Goggles, 1 x Target Plate, 2 x D 1.5V Batteries, 2 x AA 1.5V Batteries and 1 x Carrying Case. Specification: Laser Type: RedAccuracy: ± 0.1mm/mDiameter of Working Area with Set Receiver: Ø600mLaser Class: 2Laser Wave Length: 635nmIP Rating: IP65
The DEWALT DCE079D1G Green Rotary Laser is a fully automatic rotary laser measuring tool, best suited to professional use in work site environments. Green lasers deliver a better working range, in comparison to red lasers, and are easier to see during daytime conditions. Features an automatic horizontal and vertical self-levelling with plumb and a levelling accuracy of ±1.5m@30m. It has a 76m visibility range and a 600m working range, when used with the detector. Includes a manual single slope mode (±10 °) and a scan mode in X and Y axis. The laser incorporates a heavy-duty rubber housing, that is IP67 rated against dust and splash. It has also been drop tested, up to 1 metre. Supplied with the following: 1 x Green Laser Detector, 1 x Green Laser Target Card, 1 x Green Laser Glasses, 1 x 18 Volt 2.0Ah Li-Ion Battery, 1 x 10.8, 14 & 18 Volt DCB107 XR Li-Ion Charger and 1 x DWST1-71195 TSTAK™ Deep Toolbox. Can be powered by 18 Volt XR or 54 Volt FlexVolt Batteries. Specification Accuracy: ±1.5mm.Self-Levelling: 8º.Working Range: 76m.Detector Range: 600m.Rotation Speed: 0-300/600-1,000/min. Laser Type: GREEN.
The Ridgid Micro LM-100 Laser Distance Measure provides simple, quick and accurate distance readings with its ultra-sharp Class II lasers. Distance reading will appear on the easy to read LCD display. The measure enables professional tradesman to quickly determine run distances for bidding, calculate the distance of piping runs, measure trouble spots down the line and quickly determine spacing for code compliance. Measures feet, inches and metres. Stores up to 20 measurements. Bright Backlit Display allows use in poorly lit areas. Rugged over-moulding allows excellent grip. Measurement calculations: area, volume, and indirect measurement calculations. Specification Accuracy: ±1.5mm.Operating Range: 50m.Power Supply: 2 x AAA Batteries (Included).Protection Class: IP 54 (dust & water splash).
The DEWALT DW088CG Cross Line Green Laser is self-levelling up to 4° and accurate to ±0.3 mm/m in levelling applications. It has an integrated magnetic pivoting base with 1/4in thread for use with tripod. With automatic out of level indication that can mark a levelled line in seconds and maintains full brightness for visibility. The body of the level is IP54 rated, meaning it is resistant to debris/water. The overmolded housing and thick glass protect the tool and help maintain calibration under jobsite conditions. Full-time pulse mode allows use with detector. Works with DE0892G detector (NOT SUPPLIED) up to the distance of 50 metres. Specification: Laser Class: 2, Level Accuracy: ±3mm@10mSelf-Levelling Range: 4°.Visibility Indoor: 20m.Power: 3 x AA Batteries (Supplied).Thread: 1/4in.
The Ridgid CL-100 Micro Self-Levelling Cross Line Laser has a 360° swivel base and provides instant projection of super-bright vertical and horizontal lines. Its outer casing is IP54 rated, meaning it is protected against splash and dust damage. Uses single knob operation, making it very easy to use and allowing rapid levelling and alignment. Supplied with: 1 x Elevating Tripod, 1 x Laser Enhancing Glasses and 1 x Plastic Carrying Case. Specification Level Accuracy: 2mm @10m.Self-Levelling Range:±6°.Working Range: 30m.Power: 3 x AA Batteries 1.5V (Supplied).Tripod Thread: 1/4in.Laser: Class 2.Weight: 0.50kg.
The Stabila LAR 160 G Rotation Laser has a high levelling accuracy of ± 0.1mm/m, fast self-levelling within 20 seconds. Fully automatic with four laser functions: horizontal and vertical rotation, plumb line function and right angle (90°) in vertical operation. Easy to use, via three control buttons: on/off, tilt mode and manual mode. Covered with a shock-absorbent soft grip casing that provides protection against impacts whilst the stable housing cover protects the laser optics. Dustproof and waterproof to IP65. With two integrated 5/8in threads in the housing, for horizontal and vertical tripod use. Utilises Stabila Greenbeam technology for improved visibility of the rotating laser beam. Green laser beams are 4x more visible to the human eye than red beams. Supplied with: 1 x REC 160 RG Receiver, 1 x Target Plate, 2 x D 1.5V Batteries, 2 x AA 1.5V Batteries and 1 x Carrying Case. Specification: Laser Type: GreenAccuracy: ± 0.1mm/mDiameter of Working Area with Set Receiver: Ø600mLaser Class: 2Laser Wave Length: 510-530nmIP Rating: IP65
The Stanley Intellilevel 5 Section Aluminium Grade Rod designed to provide height and distance readings used in conjunction with optical levels, rotating lasers and line lasers. It is extendable up to 5m, graduated in cm and mm. Made from strong, lightweight aluminium for durability.
The DEWALT DE0733 Elevated Tripod has been designed to provide a heavy-duty platform for any line or spot laser, LDM and cameras with 1/4in mounting threads. Constructed from lightweight aluminium alloy for job site durability. An integrated vial on the head enhances for levelling accuracy and quick setup. The head can tilt and adjust for quick and easy movement. This tripod has 2-stage telescopic legs and an elevating head with crank for quick and easy height adjustment. Each leg is fitted with a quick-release clamp. The rubber feet provide extra grip for stability on any terrain. Supplied with a soft bag for storage. Specification: Thread: 1/4inHeight: 97-248cm
The DEWALT 100 Metre DW03101 Laser Distance Measure calculates area and volume with automatic calculations that make job estimates quick and easy. It has an additional triangular area function. The integrated inclinometer can be used as a digital level to calculate continuous height and indirect horizontal distances. Indirect height measurement uses Pythagoras to measure distances even when point A and/or point B isn’t accessible for linear measurement. The laser distance measure has a large 3-line backlit display which helps to improve screen visibility in both dim and bright conditions. It features a memory unit that stores last 20 measurements. A multifunctional end piece folds at 90 degrees for edge measurements and extends 180 degrees for measurements from corners. Durable design with over-molded housing, which has been 6 ft (2m) drop tested, and is IP65 water/debris resistant. Specification Accuracy: ±1mm.Operating Range: 100m (330ft).Power Supply: 2 x 1.5 Volt LR03 (AAA-size) ;Batteries (supplied).
The Stanley Intelli Tools Cubix™ Cross Line Laser Level is ideal for indoor use, DIY and light residential construction jobs, including levelling chair rails and hanging cabinets. By projecting bright red vertical and horizontal lines onto flat surfaces, users can easily level what they are installing. The Cubix™ is protected by a durable, overmoulded housing. It projects a red vertical line and horizontal line. Fitted with a touch pad control panel, locking pendulum and a 3 position lock switch with manual mode. Supplied with: 1 x Protective Pouch1 x Removable QuickLink™ Bracket2 x AA Batteries1 x Quick Start Guide Specification: Level Accuracy: ±0.6mm/mWorking Range: 12mPower: 2 x AA Batteries (Supplied)Thread: 1/4in
Stabila OLS 26 Optical level with a 26-fold magnification in optical system, no batteries required to use with the focusing and adjusting screw easily accessible. It has a robust IP54 protection rated casing with easy-grip, shock-absorbing soft shell and solid protection of optical unit also in front area. Magnification: 26-foldMinimum focussing distance: approx. 1mObjective lens aperture: 38mmProtection class: IP 54Standard deviation: < 2mm/kmView in objective: uprightDiameter of field of vision at 100 m: 2.1mMultipication constant: 100Addition constant: 0Compensator accuracy: 0,5Accuracy of height in a single measurement: 1mm/10mCircular vial: 8'/2 mmHorizontal circle : Partition degreeIncrements: 1° Horizontal circle: 360° Supplied with : Optical level OLS 26, Geo-folding rule 2m, plumb line, rain protection, adjusting tools in robust carry case.
The Stabila LA 180 L Multi-Line Laser with Auto Alignment function: receiver automatically controls fine alignment of the laser up to 40m. Automatic axis transfer and creation of right angles. Pulsed laser lines for exact height measurements with the receiver (up to 100m) indoors and outdoors. 3 vertical lines, 1 horizontal line and plumb line function. Level Accuracy: ±0.07mm/mSelf-Levelling Range: ±5.0°Line Straightness: ±0.1mm/m90° Angle Precision: ±0.2mm/mLaser Beam Accuracy: ±0.2mm/m Power Supply: 4 x D 1.5VProtection Class: IP54
The Stabila REC 300 Receiver has two displays: one each on the front and back for fast measuring and taking readings in any position. Digital display of the reference deviation in mm, in, in (fractions) and ft. Allowing you to read the deviation from the reference height directly in figures, for faster and more precise correction of strut positions and concrete levels. A series of symbols indicate your distance from the reference height and whether you are too high or low. Two sensitivity levels simplify setting-up over longer or shorter distances. If you also switch on the acoustic signals, you can select two volume levels. Its loud signal can be heard even with a loud background noise. Compatible with: LAR200 & LAR250 lasers.
The Stabila LAX 300 G Cross Line Laser Level is the ideal partner for interior construction professionals who need accurate laser lines with optimum visibility. The innovative STABILA GREENBEAM technology provides razor-sharp, extremely bright laser lines. You can perform plumb-line and levelling work on the floor, wall and ceiling, all at the same time. The laser produces 1 horizontal line, 1 vertical line and plumb-line dots, upwards and downwards. The vertical line almost covers the entire room. It has a quick self-levelling function and pendulum technology that has been designed specifically for the construction site. With easy to change functions, via the single-button operation. Fitted with energy-saving laser diodes that provide an operating time of up to 15 hours. Can be used directly on the floor, attached to a tripod (1/4in thread) or fastened to metallic objects/wall bracket by its rare earth magnet. The compact housing features an extendable foot for height adjustment and working directly on U-profiles. With shock absorbent STABILA soft grip casing that is IP54 rated, against splash and dust damage. The laser can be pivoted 360° inside the housing. Supplied with: 1 x Target Plate, 1 x Wall Bracket, 1 x Belt Pouch & 3 x AA 1.5 Volt Batteries Specification: Level Accuracy: ± 0.3mm/m.Self-Levelling Range: ± 4.5°.Working Range: 30m.Power: 3 x AA Batteries (Supplied).Average Battery Life: 15 Hours.Tripod Thread: 1/4in.Laser Class: 2.Line Straightness:± 0.2mm/m.Protection Class: IP54 rated, against splash & dust damage.
The Stabila LAR 160 Rotation Laser has a high levelling accuracy of ± 0.1mm/m, fast self-levelling within 20 seconds. Fully automatic with four laser functions: horizontal and vertical rotation, plumb line function and right angle (90°) in vertical operation. Easy to use, via three control buttons: on/off, tilt mode and manual mode. Covered with a shock-absorbent soft grip casing that provides protection against impacts whilst the stable housing cover protects the laser optics. Dustproof and waterproof to IP65. With two integrated 5/8in threads in the housing, for horizontal and vertical tripod use. Supplied with: 1 x REC 160 RG Receiver, 1 x Laser Goggles, 1 x Target Plate, 2 x D 1.5V Batteries, 2 x AA 1.5V Batteries and 1 x Carrying Case. Specification: Laser Type: RedAccuracy: ± 0.1mm/mDiameter of Working Area with Set Receiver: Ø600mLaser Class: 2Laser Wave Length: 635nmIP Rating: IP65
The RIDGID Micro LM-400 Advanced Laser Distance Measure features Bluetooth® technology, allowing it to be connected to smartphones and tablets to easily view, store and share data. This helps to avoid time-consuming paperwork and costly writing errors. Android® and iOS® Apps easily and quickly transfer and overlay measurements from the Micro LM-400 onto a photo or sketch. The LM-400 has an easy-to-read backlit 4-line display. It has a long measuring range of up to 7m and can measure angles of up to 65°. Its inclination sensor can provide instant simultaneous horizontal, vertical and diagonal distance measurements. Functions: Distance, Volume and area calculation, Addition and subtraction, Continuous measurement, Stake out, Self-triggering timer, Indirect measurements, Angle measurements, Bluetooth® connection, Transfer/overlay data to sketches and RIDGIDSketch App for iOS® and Android®. Specifcation Accuracy: ±1.5mm.Operating Range: 70m.Power Supply: 2 x AAA Batteries (Included).Protection Class: IP 54 (dust & water splash).
The Stanley Intelli Tools 360° Cross Green Line Laser Level projects a 360° horizontal line and 100° vertical line. Ideal for use in a wide variety of jobs, including woodworking, drywall installation, framing and roofing. The body is fitted with overmould housing for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50 rated, making it ideal for indoor DIY and residential construction jobs. Supplied with: 4 x AA Alkaline Batteries, 1 x QuickLink™ Bracket and 1 x Storage Pouch. Specification: Level Accuracy: ±0.4mm/mWorking Range: 25mPower: 4 x AA Batteries (Supplied)Thread: 1/4in
The Stabila LD 220 Laser Distancer is a compact, easy-to-use laser with 4 basic measuring functions: length, area, volume and continuous measurement. It has a large, back lit screen with large readout making it easy to read in any enviroment. With an impact-resistant, IP54 rated housing with shock-absorbent soft-grip casing. The laser delivers quick measurement results and assists in daily work, e.g. calculating how much material is needed. Specification Accuracy: ±3.0mm.Operating Range: 0.2-30m.Power Supply: 2 x AAA Batteries (Included).Protection Class: IP54 (dust & water splash).Laser Class: 2.Laser wavelength: 635nm.
The Stanley Intelli Tools TLM 50 Laser Measure can measure length with a single button, simple to use, both for taking simple measurements and for continuous measures. It has a compact, lightweight design with an ergonomic rubber casing. Its back lit display clearly shows measurements, even in dark areas. Also has an auto power off that saves battery power. Accuracy: ± 3mmOperating Range: 15mPower Supply: 2 x AAA Batteries (Included)
The DEWALT DE0730G Green Laser Target Card has a magnetic base for attaching to ceiling grid or steel studs. For use in drop ceiling installation and steel stud layout. Helps to enhance laser beam visibility for easy location of the laser. For use with green beam lasers.
The Stabila LAX 50 projects crossed horizontal and vertical lines in a matter of seconds - both perfectly levelled. Ready for all internal work, the result - long, easily visible horizontal and vertical laser lines at right angles to each other which make setting-out easy. For the installation of built-in furniture, laying tiles, wallpapering and all installation work. Setting out without a single pencil mark - that's clean working! Supplied with a combined tripod / telescopic leg kit. Unscrew the tripod legs and screw together to form the telescopic leg - fix the LAX50 to the leg - and measure! The tripod covers a space of 0.6-1m. The telescopic leg can be fixed between floor/ceiling heights of up to 2.75m. If the LAX50 is placed on the ground, its working height is 7cm. Its versatility makes the STABILA LAX50 a regular partner for many applications. Specification Level Accuracy:±0.5mm/m.Self-Levelling Range: 4°± 0.5°.Working Range: 10m.Power: 3 x AA Batteries (Supplied).Average Battery Life: 30 Hours. Tripod Thread: 1/4in.Laser Class: 2.
The DEWALT DE0892G Green Beam Detector is very easy to use and offers a 50m working range. With selectable narrow and wide accuracy settings and a backlit LCD display. Magnets allow detector to be mounted on the metal tracks and there is a heavy-duty clamp for mounting on a grade rod. The dector will automatically shut off if it is inactive for 5 mins, prolonging battery life. Compatible with: DCE088D1G-QW/-GB/-XE & DCE089D1G-QW/-GB/-XE. Supplied with: 1 x Heavy-Duty Detector Clamp & 1 x 9 Volt Battery.
The DEWALT DCE088D1G Self-Levelling Green Cross Line Laser projects bright crossing horizontal and vertical lines. It has a variable blink sequence for manual mode and a full-time pulse mode, for use with detector whilst maintaining full brightness for visibility. The laser is fitted with a locking pendulum to help prevent damage to internal components. The integrated magnetic, pivoting base has a 1/4in thread. IP65 rated, against projected water and dust damage. Supplied with: 1 x 10.8 Volt 2.0Ah Li-Ion Battery.1 x Charger.1 x Kitbox. Specification Laser Class: 2, Level Accuracy: ±3mm@10m.Self-Levelling Range: 4°.Visibility Outdoor/Indoor: 30m (60m with detector).Thread: 1/4in.
The Stanley Intelli Tools TLM 330 True Laser Measure allows for rapid and precise one person operation over long distances with easy to take measurements in busy or out-of-reach areas. It can measure length, area and volume up to 100m. Also has a Pythagoras function for remote measurement of high walls, Min-Max, tracking and trapezoid measurement for accurate layout. The back lit, 3 line display provides visibility in all working conditions and will store the last 20 measurements taken for reference. It also features a handy addition/subtraction calculator and a timer function with one person operation for greater productivity. The level ensures measurements are extremely accurate and it has a fitting for a camera tripod. Specification Accuracy: ±1mm.Operating Range: 0.5-100m.Power Supply: 2 x AAA Batteries (Included).Operating Temperature: -10-50°C.
The Stanley Intellilevel Tilting Head Camera Tripod extends between 44 - 119cm in height. It is compact and stable with a tilting plate for wider versatility and integrated levelling.
The Stanley Intelli Tools 1-77-184 Floor to Ceiling Laser Pole is supplied as 4 detacheable sections that screw together, one section is telescopic and is extendable up to 3.25m. Both end pieces feature detachable spring feet. The mounting bracket accepts both 1/4in and 5/8in thread lasers. Compatiable with: CL-90.
The Stanley Intelli Tools C-Line Cross Line Laser Level projects bright red vertical and horizontal lines onto flat surfaces. Perfect for DIY and light residential construction jobs including levelling chair rails and hanging cabinets. Users can easily ensure that the item they are installing is level. Fitted with a 3-position pendulum lock (on/off/manual mode) for safe transportation. Rated to IP50 to protect against dust. Supplied with a magnetic L-Bracket. Specification: Level Accuracy: ± 6mm @10mWorking Range: 10mPower: 2 x AA batteries (supplied)Protection: IP50 RatedThread: 1/4in
The Stabila NL Telescopic Leveling Rod is made from anodised aluminium. It is extendable up to 2.4m with a scale in mm graduations. The adjustment slide ensures optimal display clarity and trouble-free height definition. Suitable for all STABILA laser receivers and receiving units. How To Use: 1. Align the rods zero mark to the laser beam. 2. Move the receiver on the levelling rod to bring it back in line with the laser beams height at the new measurement point. 3. The height difference plus or minus can now be read from the NLs scale
The Stabila BST-K Construction Tripods have a removable head that allows quick and easy mounting of the laser, simply remove and head and attach onto your laser before fastening the head onto the tripod. The lifting system with crank handle allows the height of the laser to be raised and locked off at a range of heights. The built-in air cushion lifting system allows the central column to descend gently, even if the user forgets to lock off the tripod. This prevents accidental damage to the laser. Each leg of the tripod can be adjusted individually and each spiked foot has rotatable rubber shoes, for scratch-free use indoors. Also fitted with a high quality chain spread stopper.The Stabila BST-K-M Mini Column Construction Tripod extends between 69 - 170cm in height. It has a compact design, that makes it easy to store and also enables working at lower heights than when working with traditional tripods.
The Stanley Intelli Tools Cross90™ Green Beam Laser is self-levelling and projects a 100° vertical beam, horizontal beam and an additional 90° vertical beam. The 90° beam is ideal for tile or flooring installation or to lay out partition walls with ease. The green beams allow for enhanced visibility while working. The body is fitted with overmould housing and rubber bumpers on all corners for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50 rated, making it ideal for indoor DIY and residential construction jobs. Supplied with: 2 x AA Alkaline Batteries, 1 x QuickLink™ Bracket and 1 x Storage Pouch. Specification: Level Accuracy: ±0.5mm/mWorking Range: 16mPower: 2 x AA Batteries (Supplied)Thread: 1/4inWeight: 0.6kg
The Stanley Intelli Tools Cubix™ Cross Line Laser Level is ideal for indoor use, DIY and light residential construction jobs, including levelling chair rails and hanging cabinets. By projecting bright green vertical and horizontal lines onto flat surfaces, users can easily level what they are installing. The Cubix™ is protected by a durable, overmoulded housing. It projects a green vertical line and horizontal line. Fitted with a touch pad control panel, locking pendulum and a 3 position lock switch with manual mode. Supplied with: 1 x Protective Pouch1 x Removable QuickLink™ Bracket2 x AA Batteries1 x Quick Start Guide Specification: Level Accuracy: ±0.6mm/mWorking Range: 16mPower: 2 x AA Batteries (Supplied)Thread: 1/4in
The Stabila BST-K Construction Tripods have a removable head that allows quick and easy mounting of the laser, simply remove and head and attach onto your laser before fastening the head onto the tripod. The lifting system with crank handle allows the height of the laser to be raised and locked off at a range of heights. The built-in air cushion lifting system allows the central column to descend gently, even if the user forgets to lock off the tripod. This prevents accidental damage to the laser. Each leg of the tripod can be adjusted individually and each spiked foot has rotatable rubber shoes, for scratch-free use indoors. Also fitted with a high quality chain spread stopper.The Stabila BST-K-L Column Construction Tripod extends between 98-220cm in height.
The Stabila LAX 50 G Cross Line Laser is self-levelling for working quickly and directly on the laser lines. It uses STABILA GREENBEAM technology that has especially bright, fine, green laser lines for optimum visibility which is up to 30% sharper than red lasers up to 30m. The rotating multipurpose platform allows for flexible positioning on the floor or tripods (1/4in and 5/8in threads), as well as on metal objects with the strong rare earth magnetic system. Kit includes: Multipurpose platformBelt pouch for easy transport and storage3 x AA batteries Operating life: Up to 7 hoursProtection class IP53Class 2 laserAccuracy ±0.5 mm/m
The Stabila LAR 350 Rotation Laser is a fully automatic motor-driven rotation laser for horizontal and vertical applications, as well as manual inclination in 2 axes. With innovative motion control for quick, reliable and convenient laser operation via the supplied remote control. It has several useful functions, including: Dual slope inclination function, which allows for controlled inclination setting of up to 5° on 2 axes; Section mode enables you to set up a working area, meaning that the laser beam is only emitted in a defined area; Manual alignment function provides a pivoting axis in vertical operation; The integrated LED assist system allows for easy operation and safety in the workplace. It alerts the user at various points, for example, which axis is currently tilted or is being tilted. The body of the laser is IP65 rated, dust and waterproof. It also incorporates the patented STABILA PROTECTOR system, which offers the maximum protection, even when the laser is dropped from a tripod at a height of up to 1.80m. Supplied with the Stabila REC300 Receiver which has 2 displays: one each on the front and back with digital display of the reference deviation in mm, inches in (fractions) and ft. Allowing you to read the deviation from the reference height directly. Acoustic guidance with selectable volume and a series of symbols, will indicate your distance from the reference height and whether you are too high or low. Its loud signal can be heard even with loud background noise. Also supplied with: 1 x RC-LAR 350 Remote Control, 1 x BST-S Construction Tripod, 1 x NL Levelling Rod, 1 x 90° Angle Rail, 1 x Laser Goggles, 1 x Target Plate, 1 x Carrying Case, 2 x D 1.5V Batteries and 4 x AA 1.5V Batteries. Specification: Levelling Accuracy: ±0.10mm/mRange: 800mSelf-Levelling Range: ±5°Laser Class: 2Operating Life: 80 hoursBattery: 2 x 1.5V D Cell Batteries (Supplied)Protection Class: IP65Tripod Connection: 5/8in
The Stabila LT30 Telescopic Laser Pole allows for variable positioning of lasers at various working heights, anywhere between 20-365cm. Includes a laser platform with 1/4 and 5/8in threads, making it truly universal. The pole can also be used as a prop.
