JG Speedfit monobloc mixer flexi hose (braided) for the connection of plastic and copper pipe to a female mixer tap (monobloc mixers). To make a connection simply push the push-fit fitting fully on to the pipe and screw the thread into the bloc. The hose has offset spanner locations for ease installation. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit monobloc mixer flexi hose (braided) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. An alternative to hard piping to a tap or fixture Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 °C)

Read more less

JG Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread appliance, such as a tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit x union nut flexi hose is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. An alternative to hard piping to a tap or fixture Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 °C)

Read more less

JG Speedfit x union nut flexi hose (white PVC) for the connection to a male thread appliance, such as a tap. The PVC hose material significantly reduces the hose ‘kinking’ and makes the product easier to clean. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit x union nut flexi hose (white PVC) is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. An alternative to hard piping to a tap or fixture Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux White PVC design stops the pipe kinking and makes cleaning easier Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 °C)

Read more less

JG Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread appliance, such as a tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit x union nut flexi hose is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. An alternative to hard piping to a tap or fixture Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 °C)

Read more less

JG Speedfit x union nut flexi hose (braided) for the connection of pipe to a male thread appliance, such as a tap. Simply push the push-fit fitting fully onto the pipe and screw the nut onto the thread of the appliance. To demount the push-fit end, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit x union nut flexi hose is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. An alternative to hard piping to a tap or fixture Flexible design makes installation hassle free Safe flame-free installation, with no hot works, glue or flux Braided stainless steel outer layer protects the internal feed from damage Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (6 Bar @ 65 °C)

Read more less

John Guest push-fit Imperial to Metric Tube to Hose Connector is a push-fit connector designed for adapting metric sized pipe or tubing to a hose type barbed connection. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Engineered to the highest quality, the fitting is suitable for foodstuff, potable liquids and inert gases. In accordance with the British Beer & Pub Association Code of Practice, fittings can also be used with N2/CO2 and mixed gas dispense lines, as well as air, pneumatic and vacuum applications.All John Guest fittings are manufactured and assembled in the UK. Suitable for use with non-toxic food grade material, potable liquids and inert gases Safe and secure push-fit connection Connect disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics.

Read more less

JG Speedfit slip connector push-fit fitting used to easily and quickly repair damaged pipe with a slip end connection for flexible adjustment. Simply push the push-fit fitting fully onto plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit slip connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water only (not suitable for central heating systems)

Read more less

JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

Quickly and securely connects three pipes of unequal size JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

Quickly and securely connects unequal pipe sizes to form a 90° pipe bend JG Speedfit reducing elbow push-fit fitting for the connection of unequal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit reducing elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

Reliance Valves Nickel Plated Lever Ball Valves are used in water applications to allow appliances or sections of plumbing within a building to be switched off, without the need for draining the whole system. The brass ball valve reduces and stops water flow, creating an isolation after the valve position. Reliance quarter turn ball valve fittings are available with a blue or red handle to help distinguish usage (generally hot and cold) and are EN331 compliant.Typically, brass ball valves can be found at appliance outlets, such as washing machines and dishwashers to allow water supply to be cut off for installation and maintenance. We also offer in line washing machine valves with smaller handles which can be used in limited space areas.Reliance Valves Nickel Plated Lever Ball Valves can also be used under kitchen or bathroom sinks to allow users to control tap water flow. Used in place of a standard service or isolation valve, a quarter turn valve can provide a more robust, easy to use shut off option for temporarily stopping water supply. Due to the large handle, these valves are also recommended for use in specialist situations where the smaller screw type ball valves may not be suitable.The quarter turn ball valve is also available with Speedfit connections, for fast, secure and tool-free installation.Features and benefits Range of full bore ball valves Nickel plated PN40 or PN25 FBSP variants available Easy to use lever handle with clear colouring to designate usage: red and blue for hot and cold water in accordance with EN331 Not suitable for chilled water

Read more less