John Guest is a leading manufacturer of high-quality push-fit fittings, pipe, and plastic plumbing systems, renowned for their reliability and ease of use. Catering to a wide range of industries, including plumbing, heating, automotive, and drinks dispensing, John Guest products are designed to deliver exceptional performance and convenience.
JG Speedfit emergency shut off tap allows the user to stop the flow of water to a fixture or zone in the event of an emergency or repair work. Simply push the valve fully onto the pipe and turn the knob on top of the push-fit fitting to allow or restrict the flow of water. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit emergency shut off tap is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Simple hand turn of the knob instantly isolates water
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
John Guest push-fit acetal angle stop valve isolates an appliance or fixture branch feed without affecting the main supply line. The valve includes an integral service check valve for backflow prevention up to Fluid Category 2 and a ¼ turn chrome plated ball valve. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal with a food grade nitrile O-Ring, valves are suitable for foodstuff, potable liquids (10 bar at 20oC), inert gases and intermittent hot water applications (4 bar at 60oC). All John Guest fittings are manufactured and assembled in the UK.
Durable acetal stop valve with nitrile O-Ring
Integral single service check valve for backflow prevention
Integral ¼ turn chrome plated ball valve for quick and simple isolation
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Suitable for potable liquid, intermittent hot water, inert gas and food grade applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems.
Compatible with LLDPE or soft metal pipe/tubing
JG Speedfit appliance tee allows isolation of appliances such as washing machines or dishwashers for maintenance or installation. Simply push the push-fit fitting fully onto the pipe and thread the appliance hose onto the valve. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit appliance tee is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Quickly connects an appliance to the water supply
Integrated 1/4 turn shut off valve
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit appliance tap allows isolation of appliances such as a washing machines or dishwashers for maintenance or installation. Simply push the valve fully onto the pipe and thread the appliance hose onto the valve. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit appliance tap is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Quickly connects an appliance to the water supply
Integrated 1/4 turn shut off valve
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass female cylinder adaptor push-fit fitting that connects pipe to a female thread hot cylinder. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Brass Nickel Plated push-fit manifold
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Indices included
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Brass Nickel Plated push-fit manifold
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Indices included
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass manifold for centralising water distribution. The manifold enables the main supply feed to be split into reduced outlet feeds. To install, simply push the pipe fully into the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass manifold 2 port is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Brass Nickel Plated push-fit manifold
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Indices included
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit brass female stem adaptor that converts Speedfit push-fit to a female thread appliance.
The JG Speedfit brass female stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass female stem adaptor that converts Speedfit push-fit to a female thread appliance.
The JG Speedfit brass female stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass male stem adaptor that converts Speedfit push-fit to a male thread appliance.
The JG Speedfit brass male stem adaptor is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit brass back plate elbow with back plate for connecting pipe using a female thread, making it ideal for bib taps. To connect the push-fit end, simply push onto a plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit brass back plate elbow is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works. Designed, manufactured and assembled in the UK.
Instant push-fit connection and durable female thread
Safe flame-free installation, with no hot works, glue or flux
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
