John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. • Suitable for hot and cold water services, central heating systems and combi systems • BS EN 7291 parts 1, 2, 3 and S, WRAS approved • Secure and easy demounting without the need for a tool • 50 year guarantee • Minimum operating temperature - 20 °C • Maximum operating temperature - 105 °C • Maximum operating pressure at minimum temperature - 12 BAR • Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM222222W Warranty (years) 50 Angle (°) 90 Diameter (mm) 22 Pack Size 1 Fitting Type Elbow Equal or Reducing Equal

Read more less

Connect equally-sized pipes to form a 90° pipe bend quickly and securely with this JG Speedfit 15mm elbow. It can be installed in seconds, and no tools are needed – simply push it fully onto the pipe and twist the plastic nut clockwise to lock in place. This Twist & Lock mechanism secures the fitting and adds compression too. At up to 40% faster to install than traditional methods, JG Speedfit equal elbow push-fit fittings are much easier to use in confined spaces as there’s no need for hot works or tools. Demounting the connection is equally easy. Just unlock the nut by hand and push the collet towards the body of the fitting, then pull the pipe to release. JG Speedfit blends push-fit and multi-seal technology for a reliable leak-proof connection. Suitable for use with plastic or copper pipe, you can create a truly flexible plumbing and heating system, and complete the job in no time. • Push-fit system is easy to use for faster installation times • Provides a secure and reliable leak-proof connection • Install or demount in seconds, without the need for tools • Suitable for hot and cold water services • Can be used on central heating systems and combi systems • Minimum operating temperature of 20°C • Maximum operating temperature of 105°C • 12 bar maximum operating pressure at minimum temperature • 3 bar maximum operating pressure at maximum temperature • 50-year guarantee • Manufactured to BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM01315W Warranty (years) 50 Angle (°) 90 Diameter (mm) 15 Pack Size 1 Fitting Type Elbow Equal or Reducing Equal

Read more less

Connect equally-sized pipes to form a 90° pipe bend quickly and securely with this JG Speedfit 15mm elbow. It can be installed in seconds, and no tools are needed – simply push it fully onto the pipe and twist the plastic nut clockwise to lock in place. This Twist & Lock mechanism secures the fitting and adds compression too. At up to 40% faster to install than traditional methods, JG Speedfit equal elbow push-fit fittings are much easier to use in confined spaces as there’s no need for hot works or tools. Demounting the connection is equally easy. Just unlock the nut by hand and push the collet towards the body of the fitting, then pull the pipe to release. JG Speedfit blends push-fit and multi-seal technology for a reliable leak-proof connection. Suitable for use with plastic or copper pipe, you can create a truly flexible plumbing and heating system, and complete the job in no time. • Push-fit system is easy to use for faster installation times • Provides a secure and reliable leak-proof connection • Install or demount in seconds, without the need for tools • Suitable for hot and cold water services • Can be used on central heating systems and combi systems • Minimum operating temperature of 20°C • Maximum operating temperature of 105°C • 12 bar maximum operating pressure at minimum temperature • 3 bar maximum operating pressure at maximum temperature • 50-year guarantee • Manufactured to BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM01315W Warranty (years) 50 Angle (°) 90 Diameter (mm) 15 Pack Size 2 Fitting Type Elbow Equal or Reducing Equal

Read more less

John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. The reducer push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The reducer fitting ensures an easier working environment in confined places and removes the need for hot works on site. • Suitable for hot and cold water services, central heating systems and combi systems • BS EN 7291 parts 1, 2, 3 and S, WRAS approved • Secure and easy demounting without the need for a tool • 50 year manufacturers guarantee • Minimum operating temperature - 20 °C • Maximum operating temperature - 105 °C • Maximum operating pressure at minimum temperature - 12 BAR • Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM062215W Warranty (years) 50 Diameter (mm) 22 Pack Size 1 Fitting Type Coupler Equal or Reducing Reducing A Size 22mm B Size 15mm

Read more less

John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. • Suitable for hot and cold water services, central heating systems and combi systems • BS EN 7291 parts 1, 2, 3 and S, WRAS approved • Secure and easy demounting without the need for a tool • 50 year guarantee • Minimum operating temperature - 20 °C • Maximum operating temperature - 105 °C • Maximum operating pressure at minimum temperature - 12 BAR • Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM201510W Warranty (years) 50 Diameter (mm) 15 Pack Size 1 Fitting Type Coupler Equal or Reducing Reducing A Size 15mm B Size 10mm

Read more less

Choose this equal straight coupler to securely connect two pipes of the same size. Part of the JG Speedfit plastic push-fit system, the 22mm connector couldn’t be easier to use – simply push it fully onto the pipe, then twist the plastic nut clockwise to lock it in place. Up to 40% faster to install than traditional methods, the equal straight connector is also easier to use in tight spaces because there’s no need for hot works and tools. Demounting the connection is simple too – you just unlock the nut by hand, push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. The extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS, and are suitable for use with plastic or copper pipe. • Connects two 22mm pipes quickly and securely • Install or demount in seconds by hand • Easier to install in confined spaces – no hot works or tools required • Suitable for hot and cold water services, central heating systems and combi systems • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Minimum operating temperature of 20 °C • Maximum operating temperature of 105 °C • Maximum operating pressure at minimum temperature of 12 bar • Maximum operating pressure at maximum temperature of 3 bar • BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM0422W Warranty (years) 50 Diameter (mm) 22 Pack Size 1 Fitting Type Coupler Equal or Reducing Equal

Read more less

Choose this equal straight coupler to securely connect two pipes of the same size. Part of the JG Speedfit plastic push-fit system, the 15mm connector couldn’t be easier to use – simply push it fully onto the pipe, then twist the plastic nut clockwise to lock it in place. Up to 40% faster to install than traditional methods, the equal straight connector is also easier to use in tight spaces because there’s no need for hot works and tools. Demounting the connection is simple too – you just unlock the nut by hand, push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. The extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS, and are suitable for use with plastic or copper pipe. • Connects two 15mm pipes quickly and securely • Install or demount in seconds by hand • Easier to install in confined spaces – no hot works or tools required • Suitable for hot and cold water services, central heating systems and combi systems • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Minimum operating temperature of 20 °C • Maximum operating temperature of 105 °C • Maximum operating pressure at minimum temperature of 12 bar • Maximum operating pressure at maximum temperature of 3 bar • BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM0415W Warranty (years) 50 Diameter (mm) 15 Pack Size 2 Fitting Type Coupler Equal or Reducing Equal

Read more less

Choose this equal straight coupler to securely connect two pipes of the same size. Part of the JG Speedfit plastic push-fit system, the 15mm connector couldn’t be easier to use – simply push it fully onto the pipe, then twist the plastic nut clockwise to lock it in place. Up to 40% faster to install than traditional methods, the equal straight connector is also easier to use in tight spaces because there’s no need for hot works and tools. Demounting the connection is simple too – you just unlock the nut by hand, push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. The extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS, and are suitable for use with plastic or copper pipe. • Connects two 15mm pipes quickly and securely • Install or demount in seconds by hand • Easier to install in confined spaces – no hot works or tools required • Suitable for hot and cold water services, central heating systems and combi systems • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Minimum operating temperature of 20 °C • Maximum operating temperature of 105 °C • Maximum operating pressure at minimum temperature of 12 bar • Maximum operating pressure at maximum temperature of 3 bar • BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PEM0415W Warranty (years) 50 Diameter (mm) 15 Pack Size 1 Fitting Type Coupler Equal or Reducing Equal

Read more less

John Guest push-fit acetal female adaptor (BSP thread) fitting connects metric sized pipework to a BSP type fitting. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in acetal copolymer, the fitting is suitable for water, potable liquids and intermittent hot water applications (up to 65°C max). All John Guest fittings are manufactured and assembled in the UK. Rigid and hardwearing acetal copolymer material with an EDPM O-Ring Suitable for potable liquids and intermittent hot water applications up to 65°C max (not suitable for air, pneumatic or vacuum applications) Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Compatible with LLDPE or soft metal pipe/tubing

Read more less

John Guest straight adaptor (BSP thread) push-fit fitting for the connection of metric pipe to a BSP type thread. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing

Read more less

John Guest straight adaptor (BSP thread) push-fit fitting for the connection of metric pipe to a BSP type thread. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing

Read more less

John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary. Chemical Resistance For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems. Exposure to Ultraviolet Light If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV). Flexible and robust LLDPE (Linear low density polyethylene) pipe Suitable for air and pneumatics, cold, and intermittent hot water applications Broad chemical compatibility Colour coded for easy identification of service type FDA and NSF certified

Read more less