Quick to connect screw down mains stop valve JG Speedfit stop valve allows the user to stop the flow of water to a fixture or zone in the event of an emergency or for repair work. Simply push the valve fully onto the pipe. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Features and benefits Compact design is ideal for installing in areas where space is tight Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating systems)

Read more less

Quick to connect screw down mains stop valve JG Speedfit stop valve allows the user to stop the flow of water to a fixture or zone in the event of an emergency or for repair work. Simply push the valve fully onto the pipe. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Features and benefits Compact design is ideal for installing in areas where space is tight Instant push-fit connection and screw down mains stop valve Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating systems)

Read more less

Quickly connects double check valve for fluid category 3 backflow prevention with integrated isolation JG Speedfit double check service valve ensures water only flows through in one direction to prevent the backflow of contaminants. The valves ensures that water only flows through in one direction to prevent the backflow of contaminants. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit double check service valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits Double check valve (Fluid Category 3) Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)

Read more less

JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further fittings. Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits •Compact and space saving solution for centralizing system pipework •Stem connection versions available to allow for manifold grouping •Instant push-fit connection •Install and demount in seconds without tools •Safe flame-free installation, with no hot works, glue or flux •5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex •Grip & Seal collet with stainless steel teeth and main O-Ring seal •Non-toxic, resists corrosion and no scale build-up •Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe •Suitable for hot, cold and central heating applications

Read more less

JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further fittings. Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits •Compact and space saving solution for centralizing system pipework •Stem connection versions available to allow for manifold grouping •Instant push-fit connection •Install and demount in seconds without tools •Safe flame-free installation, with no hot works, glue or flux •5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex •Grip & Seal collet with stainless steel teeth and main O-Ring seal •Non-toxic, resists corrosion and no scale build-up •Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe •Suitable for hot, cold and central heating applications

Read more less

JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further fittings. Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits •Compact and space saving solution for centralizing system pipework •Stem connection versions available to allow for manifold grouping •Instant push-fit connection •Install and demount in seconds without tools •Safe flame-free installation, with no hot works, glue or flux •5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex •Grip & Seal collet with stainless steel teeth and main O-Ring seal •Non-toxic, resists corrosion and no scale build-up •Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe •Suitable for hot, cold and central heating applications

Read more less

JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further fittings. Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits •Compact and space saving solution for centralizing system pipework •Stem connection versions available to allow for manifold grouping •Instant push-fit connection •Install and demount in seconds without tools •Safe flame-free installation, with no hot works, glue or flux •5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex •Grip & Seal collet with stainless steel teeth and main O-Ring seal •Non-toxic, resists corrosion and no scale build-up •Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe •Suitable for hot, cold and central heating applications

Read more less

JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further fittings. Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits •Compact and space saving solution for centralizing system pipework •Stem connection versions available to allow for manifold grouping •Instant push-fit connection •Install and demount in seconds without tools •Safe flame-free installation, with no hot works, glue or flux •5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex •Grip & Seal collet with stainless steel teeth and main O-Ring seal •Non-toxic, resists corrosion and no scale build-up •Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe •Suitable for hot, cold and central heating applications

Read more less

JG Speedfit plastic plumbing manifolds are a durable solution that enables service pipework to be centralised at a single point. When used in conjunction with JG Speedfit Lay-Flat Polybutylene Pipe, outlet pipe work can be run directly to the fixture or appliance, without the need for further fittings. Made from polybutylene, and available in 2, 3 and 4 port options, with both direct inlet connections or alternatively with a sperate stem connection to allow for multiple manifolds to be connected together the speedfit range of plastic manifolds provide the ultimate space saving solution. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. JG Speedfit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits •Compact and space saving solution for centralizing system pipework •Stem connection versions available to allow for manifold grouping •Instant push-fit connection •Install and demount in seconds without tools •Safe flame-free installation, with no hot works, glue or flux •5-40% cost saving compared to the alternative method which includes a series of pipes, elbows and tees, making installation longer and more complex •Grip & Seal collet with stainless steel teeth and main O-Ring seal •Non-toxic, resists corrosion and no scale build-up •Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required) and copper pipe •Suitable for hot, cold and central heating applications

Read more less

Chrome finished service valve allows isolation of a fixture or appliance for emergency or maintenance work JG Speedfit ball valve (chrome plated) for connecting plastic or copper pipe. Using an easy to operate handle, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits Instant push-fit service valve with integrated isolation handle Durable brass chrome plated body Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

Chrome finished service valve allows isolation of a fixture or appliance for emergency or maintenance work JG Speedfit ball valve (chrome plated) for connecting plastic or copper pipe. Using an easy to operate handle, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits Instant push-fit service valve with integrated isolation handle Durable brass chrome plated body Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

Chrome finished service valve allows isolation of a fixture or appliance for emergency or maintenance work JG Speedfit service valve (chrome plated) for connecting plastic or copper pipe. Using a 1/4 turn screwdriver slot, the valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work. It can also be rotated insitu to discourage tampering. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit service valve (chrome plated) is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Features and benefits DZR brass body with a chrome plate is ideal for surface mounted pipework Instant push-fit service valve with 1/4 turn isolation screwdriver slot Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal™ collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less