John Guest Speedfit

JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90¡ swivel type connection. The stem elbow allows a 90¡ male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. Pack of 2The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90¡ swivel type connection. The stem elbow allows a 90¡ male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. Pack of 3The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90¡ swivel type connection. The stem elbow allows a 90¡ male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. Pack of 5The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

Easily connects two Speedfit fittings of equal size to create a swivel type 90° connection JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

Easily connects two Speedfit fittings of equal size to create a swivel type 90° connection JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

Easily connects two Speedfit fittings of equal size to create a swivel type 90° connectionJG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

Easily connects two Speedfit fittings of equal size to create a swivel type 90° connection JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit stem tee push-fit fitting for the connection of plastic or copper pipes. The stem tee joins two equal sized pipes with a spigot end for connecting a reduced sized Speedfit push-fit fitting, forming a swivel type connection. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit stem tee is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit stem tee push-fit fitting for the connection of plastic or copper pipes. The stem tee joins two equal sized pipes with a spigot end for connecting a reduced sized Speedfit push-fit fitting, forming a swivel type connection. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit stem tee is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit stem tee push-fit fitting for the connection of plastic or copper pipes. The stem tee joins two equal sized pipes with a spigot end for connecting a reduced sized Speedfit push-fit fitting, forming a swivel type connection. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit stem tee is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit stem tee push-fit fitting for the connection of plastic or copper pipes. The stem tee joins two equal sized pipes with a spigot end for connecting a reduced sized Speedfit push-fit fitting, forming a swivel type connection. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit stem tee is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. Pack of 2The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. Pack of 5The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

Choose this stop end to cap off pipework as part of a temporary or permanent installation. Part of the JG Speedfit plastic push-fit system, the 15mm stop end is easy to fit, and is demountable without tools – it can be quickly removed whenever you need to resume work or extend the system. The stop end is really useful if you have to pause your job for any reason, or if the water needs to be turned back on overnight. It’s also very helpful when pressure-testing a system before appliances are connected. • Caps off pipework quickly and easily • Install in seconds by hand – just push it fully onto the pipe • Tool-free demounting means you can resume work quickly • Suitable for hot and cold water services, central heating systems and combi systems • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Minimum operating temperature of 20 °C • Maximum operating temperature of 105 °C • Maximum operating pressure at minimum temperature of 12 bar • Maximum operating pressure at maximum temperature of 3 bar • BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PSE4615W Warranty (years) 50 Diameter (mm) 15 Pack Size 2 Fitting Type Stop End

Read more less

JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

Choose this stop end to cap off pipework as part of a temporary or permanent installation. Part of the JG Speedfit plastic push-fit system, the 15mm stop end is easy to fit, and is demountable without tools – it can be quickly removed whenever you need to resume work or extend the system. The stop end is really useful if you have to pause your job for any reason, or if the water needs to be turned back on overnight. It’s also very helpful when pressure-testing a system before appliances are connected. • Caps off pipework quickly and easily • Install in seconds by hand – just push it fully onto the pipe • Tool-free demounting means you can resume work quickly • Suitable for hot and cold water services, central heating systems and combi systems • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Minimum operating temperature of 20 °C • Maximum operating temperature of 105 °C • Maximum operating pressure at minimum temperature of 12 bar • Maximum operating pressure at maximum temperature of 3 bar • BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PSE4615W Warranty (years) 50 Diameter (mm) 15 Pack Size 5 Fitting Type Stop End

Read more less

JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 10

Read more less

Choose this stop end to cap off pipework as part of a temporary or permanent installation. Part of the JG Speedfit plastic push-fit system, the 22mm stop end is easy to fit, and is demountable without tools – it can be quickly removed whenever you need to resume work or extend the system. The stop end is really useful if you have to pause your job for any reason, or if the water needs to be turned back on overnight. It’s also very helpful when pressure-testing a system before appliances are connected. • Caps off pipework quickly and easily • Install in seconds by hand – just push it fully onto the pipe • Tool-free demounting means you can resume work quickly • Suitable for hot and cold water services, central heating systems and combi systems • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe • Minimum operating temperature of 20 °C • Maximum operating temperature of 105 °C • Maximum operating pressure at minimum temperature of 12 bar • Maximum operating pressure at maximum temperature of 3 bar • BS EN 7291 Parts 1, 2, 3 and S • WRAS-approved Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID PSE4622W Warranty (years) 50 Diameter (mm) 22 Pack Size 2 Fitting Type Stop End

Read more less

JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less

JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems

Read more less