JG Speedfit 4 way push-fit manifold for splitting a main supply line into four reduced outlet feeds. Simply push the pipe fully onto the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit 4 way push-fit manifold is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit 4 way push-fit manifold for splitting a main supply line into four reduced outlet feeds. Simply push the pipe fully onto the push-fit fitting. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit 4 way push-fit manifold is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Underfloor 5 Port Manifold connects and centralises underfloor (UFH) pipework in one place and distributes warm water through the pipe circuits to provide even and comfortable heat. When combined with the JG Aura wiring centre and JG Aura heating controls, it also offers independent zone control.
Made from stainless steel, the manifold is manufactured to the highest standards. Fast and simple to install, it has a pre-fitted wall bracket and vibration isolation mount and uniquely features JG Speedfit connections and an integral air vent and fill valve. It also features pre-assembled flow rate indicators for adjusting flow and isolating pipe circuits.
Protective dust caps are supplied on the return rail, which can be removed when installing circuit actuator valves to open and close the flow of water to each pipe loop.
High performance stainless steel manifold with 5 ports
Easy to fit wall bracket and vibration isolation mount
Fast and simple push-fit connections (JG Speedfit)
Integral air vent, fill valve and adjustable flow meter
Versatile assembly for left or right-hand supply
Protective and removable dust caps
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Screw plugs, pipe inserts (STS) and collet clips supplied
Suitable for underfloor heating applications onl
Plugs an unused port on a John Guest push-fit fitting
John Guest push-fit polypropylene plug is for plugging unused connection ports on a John Guest fitting. All John Guest fittings are manufactured and assembled in the UK.
Features and benefits
Compatible with John Guest fittings only
Suitable for foodstuff, potable liquid, inert gases, air, pneumatic and vacuum applications
Quickly and securely connect metric pipework to a BSP type connection
John Guest push-fit acetal straight adaptor (BSP Thread) fitting connects metric sized pipe/tube to a BSP type threaded connection. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal copolymer, the fitting is suitable for water, potable liquids and intermittent hot water applications (up to 65°C max). All John Guest fittings are manufactured and assembled in the UK.
Features and benefits
Rigid and hardwearing acetal copolymer material with an EDPM O-Ring
Suitable for potable liquids and intermittent hot water applications up to 65°C max (not suitable for air, pneumatic or vacuum applications)
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Compatible with LLDPE or soft metal pipe/tubing
John Guest push-fit acetal angle stop valve isolates an appliance or fixture branch feed without affecting the main supply line. The valve includes an integral service check valve for backflow prevention up to Fluid Category 2 and a ¼ turn chrome plated ball valve. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal with a food grade nitrile O-Ring, valves are suitable for foodstuff, potable liquids (10 bar at 20oC), inert gases and intermittent hot water applications (4 bar at 60oC). All John Guest fittings are manufactured and assembled in the UK.
Durable acetal stop valve with nitrile O-Ring
Integral single service check valve for backflow prevention
Integral ¼ turn chrome plated ball valve for quick and simple isolation
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Suitable for potable liquid, intermittent hot water, inert gas and food grade applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems.
Compatible with LLDPE or soft metal pipe/tubing
John Guest push-fit acetal angle stop valve isolates an appliance or fixture branch feed without affecting the main supply line. The valve includes an integral service check valve for backflow prevention up to Fluid Category 2 and a _ turn chrome plated ball valve. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in acetal with a food grade nitrile O-Ring, valves are suitable for foodstuff, potable liquids (10 bar at 20oC), inert gases and intermittent hot water applications (4 bar at 60oC). All John Guest fittings are manufactured and assembled in the UK. Durable acetal stop valve with nitrile O-Ring Integral single service check valve for backflow prevention Integral _ turn chrome plated ball valve for quick and simple isolation Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, inert gas and food grade applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems. Compatible with LLDPE or soft metal pipe/tubingPack of 10
John Guest push-fit acetal angle stop valve isolates an appliance or fixture branch feed without affecting the main supply line. The valve includes an integral service check valve for backflow prevention up to Fluid Category 2 and a _ turn chrome plated ball valve. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in acetal with a food grade nitrile O-Ring, valves are suitable for foodstuff, potable liquids (10 bar at 20oC), inert gases and intermittent hot water applications (4 bar at 60oC). All John Guest fittings are manufactured and assembled in the UK. Durable acetal stop valve with nitrile O-Ring Integral single service check valve for backflow prevention Integral _ turn chrome plated ball valve for quick and simple isolation Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, inert gas and food grade applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems. Compatible with LLDPE or soft metal pipe/tubingPack of 2
John Guest push-fit acetal angle stop valve isolates an appliance or fixture branch feed without affecting the main supply line. The valve includes an integral service check valve for backflow prevention up to Fluid Category 2 and a _ turn chrome plated ball valve. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in acetal with a food grade nitrile O-Ring, valves are suitable for foodstuff, potable liquids (10 bar at 20oC), inert gases and intermittent hot water applications (4 bar at 60oC). All John Guest fittings are manufactured and assembled in the UK. Durable acetal stop valve with nitrile O-Ring Integral single service check valve for backflow prevention Integral _ turn chrome plated ball valve for quick and simple isolation Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, inert gas and food grade applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems. Compatible with LLDPE or soft metal pipe/tubingPack of 5
John Guest push-fit acetal angle stop valve isolates an appliance or fixture branch feed without affecting the main supply line. The valve includes an integral service check valve for backflow prevention up to Fluid Category 2 and a ¼ turn chrome plated ball valve. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in acetal with a food grade nitrile O-Ring, valves are suitable for foodstuff, potable liquids (10 bar at 20oC), inert gases and intermittent hot water applications (4 bar at 60oC). All John Guest fittings are manufactured and assembled in the UK.
Durable acetal stop valve with nitrile O-Ring
Integral single service check valve for backflow prevention
Integral ¼ turn chrome plated ball valve for quick and simple isolation
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Suitable for potable liquid, intermittent hot water, inert gas and food grade applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems.
Compatible with LLDPE or soft metal pipe/tubing
JG Speedfit appliance tap allows isolation of appliances such as a washing machines or dishwashers for maintenance or installation. Simply push the valve fully onto the pipe and thread the appliance hose onto the valve. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit appliance tap is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Quickly connects an appliance to the water supply
Integrated 1/4 turn shut off valve
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit appliance tap allows isolation of appliances such as a washing machines or dishwashers for maintenance or installation. Simply push the valve fully onto the pipe and thread the appliance hose onto the valve. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit appliance tap is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Quickly connects an appliance to the water supply Integrated 1/4 turn shut off valve Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating systems)Pack of 10
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. SpeedfitÕs extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. The valve allows isolation of appliances such as a washing machine or dishwasher for maintenance or installation. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place, then push the valve fully on to the pipe and thread the appliance hose on to the valve. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. ¥ Suitable for hot and cold water services, NOT suitable for central heating systems ¥ BS EN 7291 parts 1, 2, 3 and S, WRAS approved ¥ Secure and easy demounting without the need for a tool ¥ 50 year guarantee ¥ Minimum operating temperature - 20 ¡C ¥ Maximum operating temperature - 65 ¡C ¥ Maximum operating pressure at minimum temperature - 12 BAR ¥ Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID 15APT Warranty (years) 50 Diameter (mm) 15 Pack Size 1 Fitting Type ValvePack of 2
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. SpeedfitÕs extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit plastic fitting for the connection of plastic and copper pipe. The valve allows isolation of appliances such as a washing machine or dishwasher for maintenance or installation. Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place, then push the valve fully on to the pipe and thread the appliance hose on to the valve. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in confined places and removes the need for hot works on site. ¥ Suitable for hot and cold water services, NOT suitable for central heating systems ¥ BS EN 7291 parts 1, 2, 3 and S, WRAS approved ¥ Secure and easy demounting without the need for a tool ¥ 50 year guarantee ¥ Minimum operating temperature - 20 ¡C ¥ Maximum operating temperature - 65 ¡C ¥ Maximum operating pressure at minimum temperature - 12 BAR ¥ Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID 15APT Warranty (years) 50 Diameter (mm) 15 Pack Size 1 Fitting Type ValvePack of 3
JG Speedfit appliance tap allows isolation of appliances such as a washing machines or dishwashers for maintenance or installation. Simply push the valve fully onto the pipe and thread the appliance hose onto the valve. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit appliance tap is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Quickly connects an appliance to the water supply
Integrated 1/4 turn shut off valve
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit appliance tee allows isolation of appliances such as washing machines or dishwashers for maintenance or installation. Simply push the push-fit fitting fully onto the pipe and thread the appliance hose onto the valve. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit appliance tee is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK. Quickly connects an appliance to the water supply Integrated 1/4 turn shut off valve Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit appliance tee allows isolation of appliances such as washing machines or dishwashers for maintenance or installation. Simply push the push-fit fitting fully onto the pipe and thread the appliance hose onto the valve. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit appliance tee is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Quickly connects an appliance to the water supply
Integrated 1/4 turn shut off valve
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Speedfit appliance tee allows isolation of appliances such as washing machines or dishwashers for maintenance or installation. Simply push the push-fit fitting fully onto the pipe and thread the appliance hose onto the valve. To demount the push-fit end, pull the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit appliance tee is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Quickly connects an appliance to the water supply
Integrated 1/4 turn shut off valve
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating systems)
JG Underfloor Heating Air Vent automatically discharges any air that may build up within the underfloor heating (UFH) system to eliminate any cold spots within the floor.
An alternative solution to manual bleed valves, the integral float automatically drops to allow any air to be vented from the top of the valve. The vent is easy to install as it simply screws directly into the JG Underfloor Manifold.
Integral float automatically releases air
Durable DZR brass with a nickel plate finish
Suitable for underfloor heating applications only
JG Speedfit bent tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point (horizontal pipe runs). The tap connector comes complete with brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit bent tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins.
Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system.
All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe.
Push-fit bent tap plastic fitting for the connection of plastic and copper pipe.
Simply push the bent tap fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
• Can be used in tight spaces and removes the need to hot works on site
• Suitable for hot and cold water services, central heating systems and combi systems
• BS EN 7291 parts 1, 2, 3 and S, WRAS approved
• Secure and easy demounting without the need for a tool
• 50 year guarantee
• Minimum operating temperature - 20 °C
• Maximum operating temperature - 105 °C
• Maximum operating pressure at minimum temperature - 12 BAR
• Maximum operating pressure at maximum temperature - 3 BAR
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID 15BTC (1/2)
Diameter (mm) 15
Pack Size 1
Fitting Type Tap Connector
Equal or Reducing Adapting
JG Speedfit bent tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point (horizontal pipe runs). The tap connector comes complete with brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit bent tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit bent tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point (horizontal pipe runs). The tap connector comes complete with brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit bent tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 10
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins. SpeedfitÕs extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe. Push-fit bent tap plastic fitting for the connection of plastic and copper pipe. Simply push the bent tap fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. ¥ Can be used in tight spaces and removes the need to hot works on site ¥ Suitable for hot and cold water services, central heating systems and combi systems ¥ BS EN 7291 parts 1, 2, 3 and S, WRAS approved ¥ Secure and easy demounting without the need for a tool ¥ 50 year guarantee ¥ Minimum operating temperature - 20 ¡C ¥ Maximum operating temperature - 105 ¡C ¥ Maximum operating pressure at minimum temperature - 12 BAR ¥ Maximum operating pressure at maximum temperature - 3 BAR Technical specification Brand JG Speedfit Colour White Material Plastic Manufacturer ID 15BTC (1/2) Diameter (mm) 15 Pack Size 1 Fitting Type Tap Connector Equal or Reducing AdaptingPack of 2
