The McAlpine TSG50T6WH is a 50mm water seal trapped gully that features a tile/grating with removable grid design. It is designed to be used in horizontal waste pipes with a 2" outlet, and comes with a 2" x 1½" socket reducer to enable it to be connected to 1½" waste pipes.
The trapped gully has a 50mm water seal, which prevents foul odours and gases from escaping through the waste pipe and into the building. The tile/grating with removable grid design provides easy access for cleaning and maintenance, ensuring that the trapped gully remains free from blockages and debris.
The TSG50T6WH is made from high-quality materials that are resistant to chemical corrosion and degradation, ensuring that it will last for many years. It is also compliant with all relevant building codes and regulations, making it suitable for use in residential and commercial properties.
Overall, the McAlpine TSG50T6WH trapped gully is a reliable and practical solution for preventing foul odours and gases from escaping through the waste pipe. Its durable construction and tile/grating with removable grid design make it a popular choice for use in a wide range of applications, including bathrooms, kitchens, and utility rooms.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50-ANTI/LIG is a type of trapped gully used in plumbing and drainage systems. It has a 50mm water seal, which helps to prevent foul odors and gases from entering the building. The gully features a clamp ring and cover plate design, which provides a secure and watertight seal.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, allowing it to be connected to a range of piping systems. The horizontal outlet is designed for easy connection to a waste pipe, while the socket reducer provides a secure connection to the main drainage system.
The TSG50-ANTI/LIG is specifically designed to prevent the ingress of insects and other small creatures into the plumbing system. It features an anti-ligature design, which makes it difficult for objects or materials to be attached to the gully, reducing the risk of blockages and maintaining the integrity of the plumbing system.
Overall, the McAlpine TSG50-ANTI/LIG is a practical and reliable trapped gully that provides excellent performance and helps to maintain the health and safety of the building's occupants by preventing the ingress of foul odors, gases, and insects. Its anti-ligature design makes it particularly useful in environments where this is a concern, such as hospitals, mental health facilities, and other public buildings.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine T12R is a rubber reducer fitting that connects a 1 1/4-inch pipe to a 1-inch pipe. This reducer is designed for use with plastic pipes and features a push-fit connection, which makes installation quick and easy.
The T12R reducer is made of rubber, which allows it to absorb vibrations and noise from the pipes. It also provides some flexibility, which can be helpful in installations where the pipes may need to bend or flex slightly.
It's important to note that the size "28mm" is equivalent to 1 1/8 inches, so this reducer may not be a perfect fit for 1 1/4-inch and 1-inch pipes. However, the rubber material should allow for some flexibility to accommodate slight size differences.
・ Reduces 1¼" to 1"/28mm
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine Adjustable Straight Connector 40mm MT18E is a plumbing fitting designed for use in waste water systems. It features a 40mm diameter and is made of durable polypropylene, which is a type of plastic that is resistant to chemicals and corrosion.
The connector is adjustable, which means it can be rotated and angled to fit into tight spaces and accommodate various installation configurations. It is also designed with a compression fitting, which allows for easy installation and disassembly without the need for special tools or adhesives.
The McAlpine Adjustable Straight Connector 40mm MT18E is suitable for use with a range of plumbing fixtures, including sinks, baths, and showers. It is designed to be compatible with both PVC and ABS waste pipes, making it a versatile option for a variety of plumbing installations.
Overall, the McAlpine Adjustable Straight Connector 40mm MT18E is a high-quality and reliable plumbing fitting that provides a durable and easy-to-install solution for waste water systems. Its adjustable and versatile design makes it a popular choice among plumbers and DIY enthusiasts alike.
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
・ Available in 1¼", 1½", and 2" sizes
The McAlpine Adjustable Straight Connector MS18E is a plumbing fitting designed for connecting two pipes of 32mm diameter in a straight line. This connector is adjustable, which means it can be angled to suit the requirements of the plumbing installation. It is commonly used in both commercial and residential plumbing applications.
The connector is made from high-quality materials to ensure durability and long-lasting performance. The body of the connector is made from polypropylene, a strong and rigid plastic material that is resistant to chemical corrosion and damage from impact. The connector features compression fittings on both ends, which allow it to be easily and securely connected to the pipes.
The MS18E adjustable straight connector is designed to be easy to install and adjust. The connector can be rotated to any angle, up to 90 degrees, which makes it suitable for a wide range of plumbing installations. The connector can be tightened by hand, using the compression fittings on both ends, or with a wrench if needed.
Overall, the McAlpine Adjustable Straight Connector MS18E is a reliable and versatile plumbing fitting that provides a secure and adjustable connection between two pipes of 32mm diameter. Its high-quality construction and easy installation make it a popular choice for professional plumbers and DIY enthusiasts alike.
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
・ Available in 1¼", 1½", and 2" sizes
The McAlpine R/SEAL-35X32 is a synthetic rubber seal reducer designed for use with chrome plated brass waste fittings. It is designed to provide a watertight seal between waste pipes or fittings of different sizes. The R/SEAL-35X32 is specifically designed to reduce the size of the waste pipe or fitting from 35mm to 32mm.
This type of synthetic rubber seal is commonly used in plumbing and waste applications where a reliable and watertight seal is required. The R/SEAL-35X32 is designed to be used with McAlpine waste fittings and is compatible with a wide range of different pipes and fittings.
Overall, the McAlpine R/SEAL-35X32 Synthetic Rubber Seal Reducer is a high-quality, reliable fitting that is well-suited to a variety of plumbing and waste applications where the reduction of the waste pipe or fitting size is necessary for a secure and watertight connection.
・ Available in 3 sizes
・ Use with McAlpine Chrome Plated Brass Waste Pipe and Fittings
The McAlpine 1 1/2" x 1 1/4" reducer is a plumbing fitting designed to reduce the size of a pipe or fitting from 1 1/2 inches to 1 1/4 inches. The reducer is made from high-quality materials, ensuring durability and reliability. The fitting is easy to install and features a push-fit design for a secure and leak-free connection. It is suitable for use in a variety of applications, including domestic and commercial plumbing systems, and can be used with a range of pipe materials, including PVC, ABS, and copper. This McAlpine reducer is a cost-effective solution for connecting pipes and fittings of different sizes, allowing for a smooth and efficient flow of water or other liquids.
・ Mounted on Card with Hanging Slot
・ 1½" x 1¼" Reducer
・ Manufactured in White Polypropylene
・ Supplied with Flat inlet washer
Introducing the McALPINE Adjustable Straight Connector MZ18E - Your Ultimate Solution for Seamless Plumbing!
Upgrade your plumbing system with the McALPINE Adjustable Straight Connector MZ18E, a high-quality and versatile component designed to meet your plumbing needs with precision and reliability. Crafted with meticulous attention to detail, this 2"mm connector is engineered to deliver exceptional performance, making it an essential addition to any plumbing project.
Key Features:
Adjustable Design: The MZ18E features an innovative adjustable design that allows you to customize the length according to your specific requirements. This adaptability ensures a perfect fit in various plumbing applications, providing flexibility and ease of installation.
Premium Materials: Crafted from durable and corrosion-resistant materials, this straight connector guarantees longevity and durability. The high-quality construction ensures that it withstands the rigors of daily use, providing a reliable connection that stands the test of time.
Easy Installation: Designed with the end-user in mind, the McALPINE MZ18E boasts a user-friendly installation process. The straightforward assembly saves you time and effort, ensuring a hassle-free experience whether you are a DIY enthusiast or a professional plumber.
Secure Seal: Achieve leak-free connections with the precision-engineered sealing mechanism of the McALPINE connector. Rest easy knowing that your plumbing system is sealed securely, preventing potential water damage and ensuring the integrity of your installation.
Versatility: Suitable for a wide range of plumbing applications, the MZ18E is compatible with 2"mm pipes, making it a versatile choice for various projects. From residential plumbing to commercial installations, this connector adapts to your needs effortlessly.
Invest in the McALPINE Adjustable Straight Connector MZ18E today and experience the difference in quality, durability, and performance. Elevate your plumbing projects with a connector that combines innovation and reliability, setting a new standard in the world of plumbing accessories.
Multifit Adjustable Straight Connector
Available in 1.25”, 1.5”, and 2_ sizes
Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
Manufactured in Polypropylene
The McAlpine 42G-CB is a compression straight connector made from chrome-plated brass. It is similar to the McAlpine 35G-CB, but has a larger diameter to accommodate larger pipes or fittings. The compression fitting uses a compression nut and olive to create a watertight seal between the connector and the pipe or fitting.
Like the 35G-CB, the chrome plating on the brass provides a durable and attractive finish that resists corrosion and tarnishing, making it suitable for use in a range of different environments. This type of connector is commonly used in plumbing and heating applications where a strong, reliable connection is required.
Overall, the McAlpine 42G-CB Chrome Plated Brass Compression Straight Connector is a high-quality, reliable fitting that is well-suited to a variety of plumbing and heating applications where larger diameter pipes or fittings are required.
・ Available in 32mm (Euro), 1¼" and 1½" sizes
・ Sleek chrome compression nuts match Chrome Plated Brass trap nuts
The McAlpine 35G-CB is a compression straight connector made from chrome-plated brass. It is designed to connect two pipes or fittings together in a straight line. The compression fitting uses a compression nut and olive to create a watertight seal between the connector and the pipe or fitting.
This type of connector is commonly used in plumbing and heating applications where a strong, reliable connection is required. The chrome plating on the brass provides a durable and attractive finish that resists corrosion and tarnishing, making it suitable for use in a range of different environments.
Overall, the McAlpine 35G-CB Chrome Plated Brass Compression Straight Connector is a high-quality, reliable fitting that is well-suited to a variety of plumbing and heating applications.
・ Available in 32mm (Euro), 1¼" and 1½" sizes
・ Sleek chrome compression nuts match Chrome Plated Brass trap nuts
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a minimum wall thickness of 4mm. Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for cold water use only
JG Underfloor Manifold Isolation Valve is a replacement valve for that thermostatically opens the return port for the associated manifold circuit when in use and closes when shutting down.
Installed on the return bar of the manifold, the valve opens as hot water is pumped through the circuit slowly opening as the temperature rises. The valve closes automatically as the system shuts off and cools.
Durable brass
Suitable for JG Underfloor heating manifolds manufactured prior to April 2014
JG Speedfit slip connector push-fit fitting used to easily and quickly repair damaged pipe with a slip end connection for flexible adjustment. Simply push the push-fit fitting fully onto plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit slip connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (not suitable for central heating systems)
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
Efficiently repairs and replace leaking pipework
JG Speedfit pipe repair kit for quickly and easily repairing broken pipework without having to dismantle the existing pipe set up. The Twist & Lock® cap makes it easy to install, demount and adjust. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit pipe repair kit is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Features and benefits
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
Twist & Lock® cap secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
John Guest push-fit Imperial to Metric Tube to Hose Connector is a push-fit connector designed for adapting metric sized pipe or tubing to a hose type barbed connection. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Engineered to the highest quality, the fitting is suitable for foodstuff, potable liquids and inert gases. In accordance with the British Beer & Pub Association Code of Practice, fittings can also be used with N2/CO2 and mixed gas dispense lines, as well as air, pneumatic and vacuum applications. All John Guest fittings are manufactured and assembled in the UK. Suitable for use with non-toxic food grade material, potable liquids and inert gases Safe and secure push-fit connection Connect disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristicsPack of 2
JG Speedfit cold water service equal Tee to connect three equal MDPE pipe sizes. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe. Simply push the push-fit fitting fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up.
The JG Speedfit cold water service equal Tee is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Stainless steel teeth grab ring provides extra grip on the pipe
Durable material with high impact resistance
Non-toxic and no scale build-up
Resists corrosion and biological growth
Compatible with MDPE pipes only (inserts required)
Suitable for cold water use only
JG Lowfit manifold reducer allows any JG Underfloor Manifold port to be converted to a LowFit connection size of 12mm. Simply push the reducer into the JG Speedfit port on both flow and return bars.
Manifold reducer with Speedfit connections
Suitable for use with JG Speedfit PEX and polybutylene barrier pipe (inserts required)
Suitable for underfloor heating applications only
John Guest push-fit Imperial to Metric Tube to Hose Connector is a push-fit connector designed for adapting metric sized pipe or tubing to a hose type barbed connection. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Engineered to the highest quality, the fitting is suitable for foodstuff, potable liquids and inert gases. In accordance with the British Beer & Pub Association Code of Practice, fittings can also be used with N2/CO2 and mixed gas dispense lines, as well as air, pneumatic and vacuum applications.All John Guest fittings are manufactured and assembled in the UK. Suitable for use with non-toxic food grade material, potable liquids and inert gases Safe and secure push-fit connection Connect disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics.
Quickly and securely connects three pipes of unequal size
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
Quickly and securely connects unequal pipe sizes to form a 90° pipe bend
JG Speedfit reducing elbow push-fit fitting for the connection of unequal sized plastic or copper pipe to form a 90° bend. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
Quickly and easily reduces the diameter of a John Guest push-fit fitting
John Guest black push-fit acetal reducer fitting reduces a John Guest push-fit connection port. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Pack of 10
Quickly and easily reduces the diameter of a John Guest push-fit fitting
John Guest black push-fit acetal reducer fitting reduces a John Guest push-fit connection port. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Pack of 4
John Guest white polypropylene push-fit reducing straight connector fitting connects two unequal metric sized pipes/tubes. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in polypropylene with EPDM seals, the fitting offers greater chemical resistance than push-fit acetal and is suitable for potable water (10 bar at 20°C) and intermittent hot water applications (4 bar at 60°C), including water treatment applications. All John Guest fittings are manufactured and assembled in the UK.
Pack of 10
Quickly and easily reduces the diameter of a John Guest push-fit fitting
John Guest black push-fit acetal reducer fitting reduces a John Guest push-fit connection port. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
JG Speedfit cold water service stop end that quickly and easily caps off MDPE pipework at termination points on a temporary or permanent basis. The uniquely designed push-fit fitting incorporates stainless teeth to provide a tight and secure grip on the pipe.
Simply push the JG Speedfit cold water service stop end fully onto the pipe. The connection is demountable, making it easy to work with in the ground when maintaining or altering an existing set-up. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Stainless steel teeth grab ring provides extra grip on the pipe
Durable material with high impact resistance
Non-toxic and no scale build-up
Resists corrosion and biological growth
Compatible with MDPE pipes only (inserts required)
Suitable for cold water use only
JG Speedfit bulkhead elbow push-fit fitting that is primarily used for the modular bathroom ‘Pod’ market. The bulkhead allows connections to fixtures, through partitions. Simply push the push-fit fitting fully onto plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit bulkhead elbow push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for cold water use only
John Guest straight connector push-fit fitting connects two equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing
Hozelock Straight Connector is made from high-quality, UV stable plastic. Used for extending supply hose by joining two ends together.Pack of 12 Hozelock 2778 Straight Connectors for use with Ø4mm supply tube.
Introducing the FloPlast Push Fit Waste Tank Connector 32mm White (Product Code: 244401) – a convenient and reliable solution for your waste plumbing needs. This tank connector is specifically designed for 32mm applications, providing a secure and hassle-free connection for your waste disposal system.
Key Features:
Size: The Push Fit Waste Tank Connector (244401) is tailored for 32mm applications, ensuring a precise fit and compatibility with your waste plumbing system.
Material: Crafted from high-quality materials, this tank connector offers durability and longevity for reliable waste disposal performance.
Color: The white finish adds a clean and professional look to your plumbing system, complementing various design aesthetics.
Push-Fit Connection: Engineered for a quick and easy push-fit connection, saving you time and effort during installation.
Versatile Application: Suitable for a variety of waste plumbing installations, this tank connector offers flexibility in adapting your system to different configurations.
Benefits:
Easy Installation: The push-fit design of this tank connector allows for a quick and hassle-free installation, saving you time and effort.
Durable Construction: Crafted from high-quality materials, this connector is built to withstand the demands of waste plumbing applications, ensuring longevity.
Corrosion Resistance: The materials used are resistant to corrosion, ensuring a clean and unobstructed flow in your waste disposal system.
Aesthetic Appeal: The white finish adds a clean and professional look to your plumbing setup, enhancing the overall aesthetic of your waste disposal installation.
Versatility: The tank connector's design allows for versatile application, making it suitable for various waste plumbing configurations and installations.
Upgrade your waste plumbing system with the FloPlast Push Fit Waste Tank Connector 32mm White (244401) – a reliable and user-friendly solution that combines durability with ease of installation, ensuring efficient waste disposal connections in your network.
Main Product Description: The FloPlast 114mm Square Internal Stop End is a white, gloss finish component designed to cap off the end of a gutter system, typically used with 114mm square gutters. It is made from uPVC material and comes with a 10-year guarantee.
Features:
- Manufactured from non-combustible PVC-U material
- Pre-lubricated seal for improved installation
- Available in both internal and external designs
- Suitable for use with various gutter systems, including those from major manufacturers
Benefits:
- Non-combustible and fire-resistant
- Easy to install with pre-lubricated seals
- Aesthetically pleasing with a rectilinear profile
- Compatible with a wide range of gutter systems
Introducing the FloPlast ABS Solvent Weld Level Invert Reducer 40mm x 32mm White (Product Code: 225402) – a reliable and versatile solution for your plumbing needs. This level invert reducer is designed to provide a secure and seamless connection in your plumbing system.
Key Features:
Size: Tailored with precision, the Level Invert Reducer (225402) accommodates a 40mm to 32mm transition, ensuring a precise fit in your plumbing configuration.
Material: Crafted from high-quality ABS (Acrylonitrile Butadiene Styrene), this level invert reducer offers durability and resistance to impact, ensuring long-lasting performance.
Color: The white finish adds a clean and professional look to your plumbing system, complementing various design aesthetics.
Solvent Weld Connection: Engineered for secure solvent weld connections, providing a reliable and leak-free joint for your plumbing setup.
Versatile Application: Suitable for a variety of plumbing installations, this level invert reducer offers flexibility in adapting your plumbing system to different configurations.
Benefits:
Precision Fit: Tailored for a smooth transition from 40mm to 32mm, this level invert reducer ensures a precise and secure fit, contributing to the efficiency of your plumbing system.
Durable Construction: Crafted from high-quality ABS, this reducer is built to withstand the demands of plumbing applications, ensuring longevity and resistance to impact.
Corrosion Resistance: The ABS material is resistant to corrosion, ensuring a clean and unobstructed water flow through your plumbing system.
Aesthetic Appeal: The white finish adds a clean and professional look to your plumbing setup, enhancing the overall aesthetic of your installation.
Versatility: The level invert reducer's design allows for versatile application, making it suitable for various plumbing configurations and installations.
Upgrade your plumbing system with the FloPlast ABS Solvent Weld Level Invert Reducer 40mm x 32mm White (225402) – a reliable and versatile solution that combines durability with ease of installation, ensuring efficient and secure plumbing connections in your network.
Solvent Weld White 40mm (43mm) x 32mm (36mm) Eccentric Waste Pipe Fitting Reducer
Adapt a domestic tap to accept standard quick-release push fit hose fittings. Designed to fit oval and round domestic taps with a maximum diameter of 24mm. Simply connect to the tap by tightening the stainless steel clip using the thumb screw for a strong leak free connection. Rubber sealing collar fits securely to most oval and round taps Strong leak-free connectionMale connector compatible with all standard UK fittings
A range of garden hose fittings and accessories manufactured from tough ABS plastic with a TPR soft grip coating that provides a comfortable non-slip grip for easy connection/disconnection even when wet. Hose connectors have a 3-point fixing system that provides a strong watertight seal and a push fit, pull back quick-release mechanism that enables accessories to be securely attached and disconnected in seconds. Products in this range are compatible with all 12.5mm (1/2in) bore hoses and with all other leading brands of hose fittings and accessories. Female hose connectors are mainly used to connect a hose to a male tap connector at the start of a watering system. When used with the correct accessory they can also be used to extend or connect 2 pieces of hose together or even split the hose in 2 different directions.
A range of garden hose fittings and accessories manufactured from tough ABS plastic with a TPR soft grip coating that provides a comfortable non-slip grip for easy connection/disconnection even when wet. Hose connectors have a 3-point fixing system that provides a strong watertight seal and a push fit, pull back quick-release mechanism that enables accessories to be securely attached and disconnected in seconds. Products in this range are compatible with all 12.5mm (1/2in) bore hoses and with all other leading brands of hose fittings and accessories. Allows 2 hoses to be joined together when used with 2 female hose connectors. May also be used as a temporary repair solution.