The McAlpine R1M-CO 25mm Flexible Tube x 19/23mm Rigid Pipe Straight Connector is a plumbing fitting designed to connect a 25mm flexible tube to a 19/23mm rigid pipe in a straight line. This type of connector is commonly used in waste pipe systems where there is a need for flexibility in the connection.
The connector features a 25mm diameter flexible tube with a length of approximately 300mm, providing ample flexibility for a wide range of plumbing applications. It also has a 19/23mm diameter rigid pipe connection, allowing for a secure and tight fit with the rigid pipe.
The McAlpine R1M-CO Straight Connector is made from high-quality materials, ensuring its durability and resistance to wear and tear. It is a reliable and efficient solution for connecting flexible tubes to rigid pipes, and its compact size and simple design make it a popular choice for both residential and commercial applications.
Overall, the McAlpine R1M-CO 25mm Flexible Tube x 19/23mm Rigid Pipe Straight Connector is a practical and versatile plumbing fitting that allows for the flexible connection of a tube to a rigid pipe. Its high-quality materials and flexible design ensure long-lasting performance and reliable functionality in a wide range of plumbing applications.
・ Universal Connections for 19/23mm rigid pipe and 25mm flexible pipe
・ Receives the discharge from a condensing boiler
・ Conforms to BS 6798:2014 and Building Regulations Approved Document H
The McAlpine V1MX-CO 1½" x 1½" x 19/23mm Universal Slip Tee is a type of plumbing fitting that allows for the connection of multiple pipes in a waste pipe system. It features a slip tee design, which allows for easy installation without the need for special tools or adhesives.
The slip tee fitting has a 1.1/2" diameter and is compatible with standard plumbing installations. It also features a 19/23mm connection point, which allows for the connection of overflow pipes or other smaller pipes.
The McAlpine V1MX-CO Universal Slip Tee is made from high-quality materials, ensuring its durability and resistance to wear and tear. It is a reliable and efficient solution for waste pipe systems, and its compact size and simple design make it a popular choice for both residential and commercial applications.
Overall, the McAlpine V1MX-CO 1½" x 1½" x 19/23mm Universal Slip Tee is a practical and versatile plumbing fitting that allows for the easy connection of multiple pipes in a waste pipe system. Its slip tee design and high-quality materials ensure long-lasting performance and reliability.
・ ½" Universal
・ 19/23mm Inlet receives the discharge from a condensing boiler
・ Conforms to BS 6798:2014 and Building Regulations Approved Document H
The McAlpine TUN-2 is a type of tun dish that is designed to catch water and other liquids that may overflow from a tank or cistern. It has a 50mm diameter and a 19/23mm pipe outlet, making it compatible with standard plumbing installations.
The tun dish is typically installed underneath a tank or cistern, and the outlet is connected to a pipe that leads to the drainage system. Its design allows for easy installation and maintenance, and it is made from durable materials to ensure long-lasting performance.
Overall, the McAlpine TUN-2 is a practical and reliable solution for preventing water damage and overflow in plumbing systems. Its compact size and simple design make it a popular choice for both residential and commercial applications.
・ 19/23mm Universal Outlet
・ Manufactured in Polypropylene
The McAlpine TSG50-T150SS is a 50mm water seal trapped gully designed for use in wet room and shower installations. This model features a tile/grating design with a removable grid, allowing for easy access to the trap for cleaning and maintenance.
Like other McAlpine trapped gully models, the TSG50-T150SS features a 2" horizontal outlet and a 2" x 1½" socket reducer for easy connection to the waste pipe. The water seal design prevents foul odours and gases from entering the room, ensuring a hygienic and safe environment for users.
The tile/grating design of this model provides a customizable look that can match the surrounding tiles or decor, and the removable grid makes cleaning and maintenance easy. The TSG50-T150SS also comes with a 150mm square polished stainless steel tile and securing screws, as well as an ABS adaptor.
Overall, the McAlpine TSG50-T150SS trapped gully is a reliable and practical plumbing accessory that is designed to work seamlessly with McAlpine's range of shower and wet room products. Its high-quality construction, water seal design, and easy maintenance make it an ideal choice for use in both residential and commercial bathroom installations. The tile/grating design adds an additional level of customization and aesthetic appeal, and the included stainless steel tile and securing screws provide a polished finishing touch.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50T6SS is a 50mm water seal trapped gully that is designed for use in wet room and shower installations. This particular model features a tile/grating design with a removable grid, which allows for easy access to the trap for cleaning and maintenance.
Like the standard TSG50SS model, this trapped gully also features a 2" horizontal outlet and a 2" x 1½" socket reducer for easy connection to the waste pipe. The water seal design prevents foul odours and gases from entering the room, making it a hygienic and safe option for wet room installations.
The removable grid on this model makes it easy to clean and maintain, and the tile/grating design allows for a customizable look that can match the surrounding tiles or decor. The clamp ring and cover plate are also designed to be easily removed for cleaning purposes.
Overall, the McAlpine TSG50T6SS trapped gully is a reliable and practical plumbing accessory that is designed to work seamlessly with McAlpine's range of shower and wet room products. Its high-quality construction, water seal design, and easy maintenance make it an ideal choice for use in both residential and commercial bathroom installations. The tile/grating design adds an additional level of customization and aesthetic appeal.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50SS is a 50mm water seal trapped gully that is designed for use in wet room and shower installations. It is made from high-quality materials and features a clamp ring and cover plate that provide a secure and watertight seal.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer that makes it easy to connect to the waste pipe. The water seal design prevents foul odours and gases from entering the room, making it a hygienic and safe option for wet room installations.
The McAlpine TSG50SS trapped gully is easy to install, and the removable trap makes it easy to clean and maintain. The clamp ring and cover plate are also designed to be easily removed for cleaning purposes.
Overall, the McAlpine TSG50SS trapped gully is a reliable and practical plumbing accessory that is designed to work seamlessly with McAlpine's range of shower and wet room products. Its high-quality construction, water seal design, and easy maintenance make it an ideal choice for use in both residential and commercial bathroom installations.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50WH 50mm Water Seal Trapped Gully is a plumbing component that is used to collect wastewater from various sources and channel it into the drainage system. It is suitable for use in both commercial and residential plumbing installations.
The TSG50WH gully features a water seal of 50mm that prevents unpleasant smells and gases from entering the living space. The gully also has a two-piece design consisting of a clamp ring and cover plate that can be easily removed to access the gully for maintenance and cleaning purposes.
The gully is designed with a 2" horizontal outlet and a 2" x 1½" socket reducer that makes it compatible with different types of waste pipe sizes. This versatility makes it easy to install in a range of plumbing installations.
The TSG50WH gully is made from high-quality and durable materials that are resistant to corrosion and damage caused by water and chemicals. The removable trap feature makes it easy to clean and maintain, preventing blockages and maintaining hygiene.
Overall, the McAlpine TSG50WH 50mm Water Seal Trapped Gully is a reliable and effective plumbing component designed for various plumbing installations. Its water seal, two-piece design, and compatibility with different waste pipe sizes make it an ideal choice for use in both commercial and residential plumbing installations.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52SS Two-Piece 50mm Water Seal Trapped Gully is a plumbing component that is designed to collect wastewater from a range of sources, including sinks, baths, and showers, and channel it into the drainage system. It is commonly used in both residential and commercial plumbing installations.
The TSG52SS gully features a two-piece design that makes installation and maintenance easier. The clamp ring and cover plate can be easily removed to allow access to the gully for cleaning and maintenance. The gully also features a 50mm water seal that helps to prevent foul odours and gases from entering the living space.
The gully is designed to be used with a 2" horizontal outlet and a 2" x 1½" socket reducer. This allows it to be connected to a range of waste pipe sizes and types, making it a versatile choice for a variety of plumbing applications.
The gully is made from high-quality, durable materials that are resistant to corrosion and damage from water and chemicals commonly found in bathrooms and kitchens. It also features a removable trap that can be easily cleaned to prevent blockages and maintain hygiene.
Overall, the McAlpine TSG52SS Two-Piece 50mm Water Seal Trapped Gully is a reliable and effective plumbing component that is suitable for use in a range of different plumbing installations. Its two-piece design, water seal, and range of compatible waste pipe sizes and types make it a versatile and practical choice for both residential and commercial applications.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine R16-GR is a plumbing component that is designed for use in waste water systems. Specifically, it is a 1¼" plain tail that features a 19/23mm universal connection.
The plain tail refers to the straight section of pipe that connects to the waste outlet, while the universal connection allows for a variety of waste pipes to be connected to the component.
The R16-GR is similar to the R16-BL described earlier, but the difference is that the R16-GR comes with a green cap. This green cap serves as a visual indication that the component is suitable for use in grey water systems. Grey water is waste water that is generated from sources such as washing machines, sinks, and showers, and can be reused for certain purposes such as flushing toilets and watering plants.
The McAlpine R16-GR 1¼" Plain Tail x 19/23mm Universal Connection is a reliable and versatile plumbing component that is suitable for a range of waste water systems, especially those that involve the reuse of grey water.
・ Available in Black or Grey
・ 1¼" Plain Tail x 19/23mm Universal Connection
・ Reduces Mechanical Pipe Boss Connector to accept 19/23mm pipe
・ Conforms to BS 6798:2014 and Building Regulations Approved Document H
The McAlpine R16-BL is a plumbing component designed for use in waste water systems. Specifically, it is a 1¼" plain tail that features a 19/23mm universal connection.
The plain tail refers to the straight section of pipe that connects to the waste outlet, while the universal connection allows for a variety of waste pipes to be connected to the component.
The R16-BL is designed and manufactured by McAlpine, a leading manufacturer of plumbing components in the UK. The component is made from high-quality materials to ensure it is durable and long-lasting.
Overall, the McAlpine R16-BL 1¼" Plain Tail x 19/23mm Universal Connection is a reliable and versatile plumbing component that is suitable for a range of waste water systems.
・ Available in Black or Grey
・ 1¼" Plain Tail x 19/23mm Universal Connection
・ Reduces Mechanical Pipe Boss Connector to accept 19/23mm pipe
・ Conforms to BS 6798:2014 and Building Regulations Approved Document H
The McAlpine V1MX is a 1½" equal slip tee with universal connections designed to provide a versatile plumbing solution for a variety of applications. The slip tee features three equal connections that can be easily connected to pipes of the same diameter using standard fittings and connectors.
One of the key features of the McAlpine V1MX slip tee is its universal connections, which allow for easy integration with a range of plumbing systems. The slip tee can be used with a variety of materials, such as copper, plastic, or steel, making it a versatile option for plumbers and DIY enthusiasts.
When installing the McAlpine V1MX slip tee, it is important to ensure that the tee is securely fitted and sealed to prevent any leaks or water damage. The tee should be installed with appropriate tools and materials, following the manufacturer's instructions carefully.
Overall, the McAlpine V1MX slip tee is a reliable and efficient plumbing fitting that is designed to provide a versatile solution for connecting pipes of the same diameter. Its universal connections, combined with its durable construction and ease of installation, make it a popular choice among plumbers and DIY enthusiasts alike.
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine Z18L Surefit Straight Connector is a plumbing fitting designed to connect two sections of 2" pipe in a straight line. It features the Surefit system, which is a unique combination of flexible fins and internal bushes that allow for a secure and watertight connection without the need for solvent welding or tightening.
The Z18L straight connector is made from high-quality materials that are resistant to corrosion and damage from chemicals commonly found in plumbing systems. The Surefit system ensures a tight seal that is reliable and easy to install, making it a popular choice for both professional and DIY plumbers.
The connector is suitable for use in a range of plumbing systems, including domestic and commercial installations. It is capable of handling the demands of high-flow water systems, and its simple design makes it easy to clean and maintain.
Overall, the McAlpine Z18L Surefit Straight Connector is a high-quality, reliable and durable plumbing fitting that provides a secure and watertight seal in plumbing systems. It is easy to install, compatible with a range of other fittings and pipes, and is a popular choice for both professional and DIY plumbers.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine USG2WH is a plumbing fixture that includes an untrapped gully, clamp ring, cover plate, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The clamp ring and cover plate provide a secure and stable installation of the gully. The cover plate is removable, making cleaning and maintenance of the gully easy and efficient.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2WH suitable for a variety of drainage systems.
Overall, the McAlpine USG2WH Untrapped Gully, Clamp Ring and Cover Plate, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2T6WH is a plumbing fixture that includes an untrapped gully with a 2" vertical outlet. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The 2" vertical outlet allows for easy connection to standard 2" pipework, making the McAlpine USG2T6WH suitable for a variety of drainage systems.
Overall, the McAlpine USG2T6WH Untrapped Gully with 2" Vertical Outlet is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
The McAlpine USG2T6SS is a plumbing fixture that includes an untrapped gully, a tile/grating with a removable grid, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The tile/grating with a removable grid provides a stylish and functional finish to the gully. The removable grid makes cleaning and maintenance of the gully easy and efficient.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2T6SS suitable for a variety of drainage systems.
Overall, the McAlpine USG2T6SS Untrapped Gully, Tile/Grating with Removable Grid, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The inclusion of the tile/grating with a removable grid provides a stylish and functional finish to the gully, while the socket reducer allows for easy connection to a variety of pipework. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with Polished Stainless Steel Tile with or without securing screws
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2-T150SS is a plumbing fixture that includes an untrapped gully, a tile/grating with a removable grid, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The tile/grating with a removable grid provides a stylish and functional finish to the gully. The removable grid makes cleaning and maintenance of the gully easy and efficient.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2-T150SS suitable for a variety of drainage systems.
Overall, the McAlpine USG2-T150SS Untrapped Gully, Tile/Grating with Removable Grid, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The inclusion of the tile/grating with a removable grid provides a stylish and functional finish to the gully, while the socket reducer allows for easy connection to a variety of pipework. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with Polished Stainless Steel Tile with or without securing screws
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2SS-SL-NSC is a plumbing fixture that includes an untrapped gully, a clamp ring, a cover plate, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The clamp ring and cover plate are designed to provide a secure and easy-to-install solution for covering the gully. The clamp ring ensures a tight fit between the gully and the cover plate, while the cover plate is designed to be easily removed for cleaning and maintenance.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2SS-SL-NSC suitable for a variety of drainage systems.
Overall, the McAlpine USG2SS-SL-NSC Untrapped Gully, Clamp Ring and Cover Plate, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The inclusion of the socket reducer allows for easy connection to a variety of pipework, making it a versatile solution for a range of plumbing applications. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2-R125SS is a plumbing fixture that is designed to be used as a floor gully in wet room areas or shower areas. It features an untrapped gully with a 2" vertical outlet, making it suitable for use with standard 2" pipework.
The gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
One of the key features of the McAlpine USG2-R125SS is that it is untrapped, meaning that there is no water trap or seal built into the fixture. While this can increase the risk of unpleasant odors and gases from the drainage system entering the room, it can also make it easier to maintain and clean the gully.
The 2" vertical outlet on the gully is designed to be compatible with standard plumbing fittings and pipework, allowing for easy installation and connection to the existing drainage system.
The McAlpine USG2-R125SS is suitable for use with tiled or concrete floors and can be used in both residential and commercial settings. It is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas.
Overall, the McAlpine Untrapped Gully With 2" Vertical Outlet USG2-R125SS is a high-quality plumbing fixture that is designed to provide efficient and reliable drainage for wet room areas or shower areas.
The McAlpine TSG52WH-NSC Two-Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. The clamp ring and cover plate provide a secure and durable cover for the gully.
Overall, the McAlpine TSG52WH-NSC Two-Piece 50mm Water Seal Trapped Gully is a reliable and sturdy product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the clamp ring and cover plate provide a secure and durable cover for the gully. The removable grid allows for easy access to the trap for maintenance, and the 50mm water seal helps to prevent foul odours from escaping through the drain.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52T6WH Two Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. The grid tile or grating is designed to be used with a tiled or finished floor surface, providing a discreet and attractive finish.
The TSG52T6WH model also includes a 6mm tile upstand, which helps to prevent water from seeping under the tiles and causing damage to the subfloor. This can be particularly useful in wet areas such as bathrooms and showers.
Overall, the McAlpine TSG52T6WH Two Piece 50mm Water Seal Trapped Gully is a high-quality product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the removable grid tile or grating provides easy access to the trap for maintenance. The tile/grating design also provides a discreet and attractive finish, and the inclusion of a 6mm tile upstand helps to prevent water damage to the subfloor.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52-T150SS Two Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. The grid tile or grating is designed to be used with a tiled or finished floor surface, providing a discreet and attractive finish.
Overall, the McAlpine TSG52-T150SS Two Piece 50mm Water Seal Trapped Gully is a durable and reliable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the removable grid tile or grating provides easy access to the trap for maintenance. The tile/grating design also provides a discreet and attractive finish for tiled or finished floor surfaces.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52SS-SL-SC Two-Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. Additionally, the gully includes a clamp ring and cover plate to provide a secure and hygienic seal.
Overall, the McAlpine TSG52SS-SL-SC Two-Piece 50mm Water Seal Trapped Gully is a durable and reliable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the clamp ring and cover plate provide a secure and hygienic seal. The only difference between this model and the McAlpine TSG52SS-SL-NSC is the type of cover plate used - the -SC model uses a screw-down cover plate, whereas the -NSC model uses a push-fit cover plate.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52SS-SL-NSC Two-Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. Additionally, the gully includes a clamp ring and cover plate to provide a secure and hygienic seal.
Overall, the McAlpine TSG52SS-SL-NSC Two-Piece 50mm Water Seal Trapped Gully is a durable and reliable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the clamp ring and cover plate provide a secure and hygienic seal.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52-R125SS Two Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required.
Overall, the McAlpine TSG52-R125SS Two Piece 50mm Water Seal Trapped Gully is a durable and reliable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the removable grid tile or grating provides easy access to the trap for maintenance.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
McAlpine TSG50WH-NSC 50mm Water Seal Trapped Gully is a plumbing product manufactured by McAlpine, a leading supplier of plumbing and drainage products in the UK.
This gully is designed for use in commercial and industrial drainage systems, and features a 50mm water seal to prevent foul odours from escaping through the drain. The gully also includes a clamp ring and cover plate to provide a secure and hygienic seal.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required.
Overall, the McAlpine TSG50WH-NSC 50mm Water Seal Trapped Gully is a reliable and durable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. It is easy to install and maintain, and is made from high-quality materials to ensure long-lasting performance.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50T6WH is a 50mm water seal trapped gully that features a tile/grating with removable grid design. It is designed to be used in horizontal waste pipes with a 2" outlet, and comes with a 2" x 1½" socket reducer to enable it to be connected to 1½" waste pipes.
The trapped gully has a 50mm water seal, which prevents foul odours and gases from escaping through the waste pipe and into the building. The tile/grating with removable grid design provides easy access for cleaning and maintenance, ensuring that the trapped gully remains free from blockages and debris.
The TSG50T6WH is made from high-quality materials that are resistant to chemical corrosion and degradation, ensuring that it will last for many years. It is also compliant with all relevant building codes and regulations, making it suitable for use in residential and commercial properties.
Overall, the McAlpine TSG50T6WH trapped gully is a reliable and practical solution for preventing foul odours and gases from escaping through the waste pipe. Its durable construction and tile/grating with removable grid design make it a popular choice for use in a wide range of applications, including bathrooms, kitchens, and utility rooms.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50SS-SL-NSC is a 50mm water seal trapped gully that features a clamp ring and cover plate design. It is designed to be used in horizontal waste pipes with a 2" outlet, and comes with a 2" x 1½" socket reducer to enable it to be connected to 1½" waste pipes.
The trapped gully has a 50mm water seal, which prevents foul odours and gases from escaping through the waste pipe and into the building. The clamp ring and cover plate design provides a secure and watertight seal, ensuring that the trapped gully remains in place and prevents any leaks.
The TSG50SS-SL-NSC is made from high-quality materials that are resistant to chemical corrosion and degradation, ensuring that it will last for many years. It is also compliant with all relevant building codes and regulations, making it suitable for use in residential and commercial properties.
Overall, the McAlpine TSG50SS-SL-NSC trapped gully is a reliable and practical solution for preventing foul odours and gases from escaping through the waste pipe. Its durable construction and clamp ring and cover plate design make it a popular choice for use in a wide range of applications, including bathrooms, kitchens, and utility rooms.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50-R125SS is a 50mm water seal trapped gully that features a tile/grating with a removable grid. It is designed to be used in horizontal waste pipes with a 2" outlet, and comes with a 2" x 1½" socket reducer to enable it to be connected to 1½" waste pipes.
The trapped gully has a 50mm water seal, which prevents foul odours and gases from escaping through the waste pipe and into the building. The removable grid makes it easy to clean and maintain the trapped gully, ensuring that it remains in good working order for longer.
The TSG50-R125SS is made from high-quality materials that are resistant to chemical corrosion and degradation, ensuring that it will last for many years. It is also compliant with all relevant building codes and regulations, making it suitable for use in residential and commercial properties.
Overall, the McAlpine TSG50-R125SS trapped gully is a reliable and practical solution for preventing foul odours and gases from escaping through the waste pipe. Its durable construction and easy-to-clean design make it a popular choice for use in a wide range of applications, including bathrooms, kitchens, and utility rooms.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG2-R125SS is a type of trapped gully used in plumbing and drainage systems. It has a 75mm water seal, which helps to prevent foul odors and gases from entering the building. The gully comes with a tile/grating cover that is removable for easy cleaning and maintenance.
The gully has a vertical outlet with a diameter of 110mm and comes with a 110mm x 2" reducer, allowing it to be connected to a variety of piping systems. The reducer can be easily removed if a larger diameter pipe is required.
Overall, the McAlpine TSG2-R125SS is a versatile and reliable trapped gully that is suitable for a range of plumbing and drainage applications.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 75mm Water Seal
・ 110mm Vertical Outlet
・ Supplied with110mm x 2" BS EN 1329-1:2000 solvent spigot outlet
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG1WH-NSC is a trapped gully designed for use in plumbing systems. It features a water seal of 75mm to prevent the escape of foul air from the drainage system. The gully has a clamp ring and cover plate for easy installation and maintenance. It has a 2" horizontal outlet and a 2" x 1½" socket reducer, allowing for easy connection to a variety of pipes. The gully is finished in white for a clean, modern look.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 75mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG1-R125SS is a plumbing accessory designed for use in drainage systems. It is a 75mm water seal trapped gully that comes with a tile/grating with a removable grid. The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows for easy connection to various plumbing systems.
The trapped gully features a water seal that prevents the entry of foul odors and gases from the drainage system. The removable grid makes it easy to clean and maintain the gully, ensuring that it remains free from blockages and debris.
The gully is made of durable materials, ensuring long-lasting performance and resistance to corrosion. The tile/grating with a removable grid provides a secure and tight fit for the gully, ensuring that it remains in place during use.
The McAlpine TSG1-R125SS 75mm Water Seal Trapped Gully, Tile/Grating with Removable Grid, 2" Horizontal Outlet and 2" x 1½" Socket Reducer is easy to install and is suitable for use in both domestic and commercial plumbing systems. It provides reliable protection against foul odors and gases in the drainage system, making it an essential accessory in any plumbing installation.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 75mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG1-ANTI/LIG is a plumbing accessory designed for use in drainage systems. It is a 75mm water seal trapped gully that comes with a clamp ring and cover plate. The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows for easy connection to various plumbing systems.
The trapped gully features an anti-syphon design that prevents the entry of foul odors and gases from the drainage system. The anti-syphon feature also prevents the gully from drying out and helps maintain the water seal.
The gully is made of durable materials, ensuring long-lasting performance and resistance to corrosion. The clamp ring and cover plate provide a secure and tight fit for the gully, ensuring that it remains in place during use.
The McAlpine TSG1-ANTI/LIG 75mm Water Seal Trapped Gully, Clamp Ring and Cover Plate, 2" Horizontal Outlet and 2" x 1½" Socket Reducer is easy to install and is suitable for use in both domestic and commercial plumbing systems. It provides reliable protection against foul odors and gases in the drainage system, making it an essential accessory in any plumbing installation.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 75mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine T28L is a straight connector designed to connect a 1 1/2-inch pipe or fitting in the McAlpine Surefit range to a Multifit or universal fitting. The T28L straight connector features a push-fit connection on one end that is compatible with the McAlpine Surefit range of plumbing fittings and pipes, and a compression connection on the other end that is designed to fit onto a Multifit or universal fitting.
The T28L straight connector is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to provide a watertight seal when connected to pipes or fittings. The push-fit connection on the Surefit end of the T28L connector allows for quick and easy installation, while the compression connection on the Multifit end provides a secure and reliable connection.
The T28L straight connector is designed specifically for use with the McAlpine Surefit range of plumbing fittings and pipes, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T28L straight connector is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety. The T28L straight connector is commonly used in plumbing installations where a Surefit pipe or fitting needs to be connected to a Multifit or universal fitting.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine T26L is a reducer set for use with the Surefit range of plumbing fittings and pipes made by McAlpine. The T26L reducer set includes two fittings: a 2-inch to 1 1/2-inch reducer and a 1 1/2-inch blank cap.
The 2-inch to 1 1/2-inch reducer features a push-fit connection on both ends, allowing for quick and easy installation. The reducer is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to provide a watertight seal when connected to two different sizes of pipes or fittings.
The 1 1/2-inch blank cap is designed to be used with the T26L reducer to seal off the end of a 1 1/2-inch pipe or fitting. The blank cap features a push-fit connection, which allows for quick and easy installation.
The T26L reducer set is designed specifically for use with the McAlpine Surefit system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T26L reducer set is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety. The T26L reducer set is commonly used in plumbing installations where a larger pipe needs to be reduced down to a smaller size, such as in a drain or waste pipe system.
・ Available in 3 sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine T18L is a straight connector fitting that is part of the Surefit range of push-fit plumbing fittings and pipes made by McAlpine. The T18L is designed to connect two 1 1/2-inch pipes in a straight line, without the need for special tools or adhesives.
The T18L connector features a push-fit connection on both ends, which allows for quick and easy installation. The connector is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to create a watertight seal between the two pipes.
It's important to note that the T18L connector is designed specifically for use with the McAlpine Surefit system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T18L connector is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine T12S is a reducer fitting that connects a 1 1/2-inch pipe to a 1 1/4-inch pipe in a Surefit plumbing system. Surefit is a range of push-fit plumbing fittings and pipes made by McAlpine that are designed for quick and easy installation without the need for special tools or adhesives.
The T12S reducer is made of durable plastic and features a push-fit connection on both ends, allowing for easy installation and removal. It is designed to be used specifically with Surefit fittings and pipes, so it may not be compatible with other plumbing systems.
It's important to note that the T12S reducer is not designed for use with high-pressure or hot water systems, and should only be used in applications where the water pressure and temperature are within the specified limits for the Surefit system.
・ Available in 3 sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
