JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 10
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system. The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 10
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 10
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release. Pack of 2The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systems
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit connection Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Twist & Lock mechanism secures fitting and adds compression Non-toxic, resists corrosion and no scale build-up Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water and central heating systemsPack of 10
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit degree stem ebow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a cross-over type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit degree stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a minimum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for cold water use only
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a minimum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for cold water use only
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
Choose this stop end to cap off pipework as part of a temporary or permanent installation. Part of the JG Speedfit plastic push-fit system, the 22mm stop end is easy to fit, and is demountable without tools – it can be quickly removed whenever you need to resume work or extend the system.
The stop end is really useful if you have to pause your job for any reason, or if the water needs to be turned back on overnight. It’s also very helpful when pressure-testing a system before appliances are connected.
• Caps off pipework quickly and easily
• Install in seconds by hand – just push it fully onto the pipe
• Tool-free demounting means you can resume work quickly
• Suitable for hot and cold water services, central heating systems and combi systems
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Minimum operating temperature of 20 °C
• Maximum operating temperature of 105 °C
• Maximum operating pressure at minimum temperature of 12 bar
• Maximum operating pressure at maximum temperature of 3 bar
• BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID PSE4622W
Warranty (years) 50
Diameter (mm) 22
Pack Size 2
Fitting Type Stop End
Choose this stop end to cap off pipework as part of a temporary or permanent installation. Part of the JG Speedfit plastic push-fit system, the 15mm stop end is easy to fit, and is demountable without tools – it can be quickly removed whenever you need to resume work or extend the system.
The stop end is really useful if you have to pause your job for any reason, or if the water needs to be turned back on overnight. It’s also very helpful when pressure-testing a system before appliances are connected.
• Caps off pipework quickly and easily
• Install in seconds by hand – just push it fully onto the pipe
• Tool-free demounting means you can resume work quickly
• Suitable for hot and cold water services, central heating systems and combi systems
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Minimum operating temperature of 20 °C
• Maximum operating temperature of 105 °C
• Maximum operating pressure at minimum temperature of 12 bar
• Maximum operating pressure at maximum temperature of 3 bar
• BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID PSE4615W
Warranty (years) 50
Diameter (mm) 15
Pack Size 5
Fitting Type Stop End
Choose this stop end to cap off pipework as part of a temporary or permanent installation. Part of the JG Speedfit plastic push-fit system, the 15mm stop end is easy to fit, and is demountable without tools – it can be quickly removed whenever you need to resume work or extend the system.
The stop end is really useful if you have to pause your job for any reason, or if the water needs to be turned back on overnight. It’s also very helpful when pressure-testing a system before appliances are connected.
• Caps off pipework quickly and easily
• Install in seconds by hand – just push it fully onto the pipe
• Tool-free demounting means you can resume work quickly
• Suitable for hot and cold water services, central heating systems and combi systems
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Minimum operating temperature of 20 °C
• Maximum operating temperature of 105 °C
• Maximum operating pressure at minimum temperature of 12 bar
• Maximum operating pressure at maximum temperature of 3 bar
• BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID PSE4615W
Warranty (years) 50
Diameter (mm) 15
Pack Size 2
Fitting Type Stop End
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins.
Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system.
All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe.
Push-fit plastic fitting for the connection of plastic and copper pipe.
Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site.
• Suitable for hot and cold water services, central heating systems and combi systems
• BS EN 7291 parts 1, 2, 3 and S, WRAS approved
• Secure and easy demounting without the need for a tool
• 50 year guarantee
• Minimum operating temperature - 20 °C
• Maximum operating temperature - 105 °C
• Maximum operating pressure at minimum temperature - 12 BAR
• Maximum operating pressure at maximum temperature - 3 BAR
Technical specification
Brand JG Speedfit
Colour White
Material Plastic & Brass
Manufacturer ID PEMSTC2216
Warranty (years) 50
Diameter (mm) 22
Pack Size 1
Fitting Type Tap Connector
Equal or Reducing Adapting
John Guest Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. Simple to install and no tools are required when installing or demounting fittings, making it easy to manoeuvre in tight spaces or readjust joins.
Speedfit’s extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time. By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system.
All products are accredited with the leading testing and approval organisations including WRAS and are suitable for use with plastic or copper pipe.
Push-fit plastic fitting for the connection of plastic and copper pipe.
Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place.
Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release.
The fitting ensures an easier working environment in confined places and removes the need for hot works on site.
• Suitable for hot and cold water services, central heating systems and combi systems
• BS EN 7291 parts 1, 2, 3 and S, WRAS approved
• Secure and easy demounting without the need for a tool
• 50 year guarantee
• Minimum operating temperature - 20 °C
• Maximum operating temperature - 105 °C
• Maximum operating pressure at minimum temperature - 12 BAR
• Maximum operating pressure at maximum temperature - 3 BAR
Technical specification
Brand JG Speedfit
Colour White
Material Plastic & Brass
Manufacturer ID PEMSTC1514
Warranty (years) 50
Diameter (mm) 15
Pack Size 1
Fitting Type Tap Connector
Equal or Reducing Adapting
Choose this equal straight coupler to securely connect two pipes of the same size. Part of the JG Speedfit plastic push-fit system, the 22mm connector couldn’t be easier to use – simply push it fully onto the pipe, then twist the plastic nut clockwise to lock it in place.
Up to 40% faster to install than traditional methods, the equal straight connector is also easier to use in tight spaces because there’s no need for hot works and tools. Demounting the connection is simple too – you just unlock the nut by hand, push the collet towards the body of the push-fit fitting and pull the pipe to release.
JG Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. The extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time.
By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS, and are suitable for use with plastic or copper pipe.
• Connects two 22mm pipes quickly and securely
• Install or demount in seconds by hand
• Easier to install in confined spaces – no hot works or tools required
• Suitable for hot and cold water services, central heating systems and combi systems
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Minimum operating temperature of 20 °C
• Maximum operating temperature of 105 °C
• Maximum operating pressure at minimum temperature of 12 bar
• Maximum operating pressure at maximum temperature of 3 bar
• BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID PEM0422W
Warranty (years) 50
Diameter (mm) 22
Pack Size 1
Fitting Type Coupler
Equal or Reducing Equal
Choose this equal straight coupler to securely connect two pipes of the same size. Part of the JG Speedfit plastic push-fit system, the 15mm connector couldn’t be easier to use – simply push it fully onto the pipe, then twist the plastic nut clockwise to lock it in place.
Up to 40% faster to install than traditional methods, the equal straight connector is also easier to use in tight spaces because there’s no need for hot works and tools. Demounting the connection is simple too – you just unlock the nut by hand, push the collet towards the body of the push-fit fitting and pull the pipe to release.
JG Speedfit products blend push-fit and multi-seal technology for a reliable leak-proof connection. The extensive choice of plastic, brass and chrome fittings, tap connectors, valves and flexi hoses gives you everything you need to complete the job in no time.
By combining these products with plastic push-fit pipe, you can create a truly flexible plumbing and heating system. All products are accredited with the leading testing and approval organisations including WRAS, and are suitable for use with plastic or copper pipe.
• Connects two 15mm pipes quickly and securely
• Install or demount in seconds by hand
• Easier to install in confined spaces – no hot works or tools required
• Suitable for hot and cold water services, central heating systems and combi systems
• Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
• Minimum operating temperature of 20 °C
• Maximum operating temperature of 105 °C
• Maximum operating pressure at minimum temperature of 12 bar
• Maximum operating pressure at maximum temperature of 3 bar
• BS EN 7291 Parts 1, 2, 3 and S
• WRAS-approved
Technical specification
Brand JG Speedfit
Colour White
Material Plastic
Manufacturer ID PEM0415W
Warranty (years) 50
Diameter (mm) 15
Pack Size 2
Fitting Type Coupler
Equal or Reducing Equal
JG Speedfit slip tee connector push-fit fitting that allows pipe runs to be branched off an existing pipe run without impacting the existing set up. The slip tee connector is an ideal tool should radiators or other applications need to be added during a refurbishment project. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit slip tee connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit slip connector push-fit fitting used to easily and quickly repair damaged pipe with a slip end connection for flexible adjustment. Simply push the push-fit fitting fully onto plastic or copper pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit slip connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water only (not suitable for central heating systems)
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a minimum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for cold water use only
JG Speedfit tank connector push-fit fitting for the connection of plastic or copper pipes to a cold water tank. The tank connector is designed for tanks with a minimum wall thickness of 4mm.
Simply push the JG Speedfit tank connector push-fit fitting fully onto the pipe and hand-tighten the connector to the tank. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is quicker and easier to install in confined spaces than traditional methods as it eliminates the need for hot works or tools in the loft environment. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for cold water use only
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit stop end push-fit fitting that quickly and easily caps off pipework at termination points on a temporary or permanent basis. As it is demountable without tools, it can be easily and quickly removed at any stage to allow work to restart or to make an extension to the system.
The stop end is ideal when water needs to be turned on, overnight for instance, or if a job experiences an interruption. stop ends are also useful when pressure testing a system before appliances are connected. Simply push the JG Speedfit stop end fully onto the pipe. To demount the connection, push the collet toward the body of the push-fit fitting and pull the pipe to release. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit straight tap connector push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point. The tap connector comes complete with a brass swivel nut and sealing washer. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit straight tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit stem tee push-fit fitting for the connection of plastic or copper pipes. The stem tee joins two equal sized pipes with a spigot end for connecting a reduced sized Speedfit push-fit fitting, forming a swivel type connection. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit stem tee is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit reducing tee push-fit fitting for the connection of three unequal sized plastic or copper pipes. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit reducing tee push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit degree stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a cross-over type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit degree stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
JG Speedfit degree stem ebow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a cross-over type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit degree stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
Easily connects two Speedfit fittings of equal size to create a swivel type 90° connection
JG Speedfit stem elbow push-fit fitting for the connection of two equal sized Speedfit push-fit fittings to create a 90° swivel type connection. The stem elbow allows a 90° male to female connection making it an ideal coupler for appliances such as cold water storage tanks. Simply push the push-fit fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. To demount the connection, unlock the nut by hand and push the collet towards the body of the push-fit fitting and pull the pipe to release.
The JG Speedfit stem elbow push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit connection
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Twist & Lock mechanism secures fitting and adds compression
Non-toxic, resists corrosion and no scale build-up
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water and central heating systems
