The McAlpine USG2-T150SS is a plumbing fixture that includes an untrapped gully, a tile/grating with a removable grid, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The tile/grating with a removable grid provides a stylish and functional finish to the gully. The removable grid makes cleaning and maintenance of the gully easy and efficient.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2-T150SS suitable for a variety of drainage systems.
Overall, the McAlpine USG2-T150SS Untrapped Gully, Tile/Grating with Removable Grid, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The inclusion of the tile/grating with a removable grid provides a stylish and functional finish to the gully, while the socket reducer allows for easy connection to a variety of pipework. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with Polished Stainless Steel Tile with or without securing screws
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2SS-SL-NSC is a plumbing fixture that includes an untrapped gully, a clamp ring, a cover plate, a 2" vertical outlet, and a 2" x 1½" socket reducer. It is designed to be used as a floor gully in wet room areas or shower areas.
The untrapped gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
The clamp ring and cover plate are designed to provide a secure and easy-to-install solution for covering the gully. The clamp ring ensures a tight fit between the gully and the cover plate, while the cover plate is designed to be easily removed for cleaning and maintenance.
The 2" x 1½" socket reducer allows for easy connection to standard 1½" pipework, making the McAlpine USG2SS-SL-NSC suitable for a variety of drainage systems.
Overall, the McAlpine USG2SS-SL-NSC Untrapped Gully, Clamp Ring and Cover Plate, 2" Vertical Outlet and 2" x 1½" Socket Reducer is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas. The inclusion of the socket reducer allows for easy connection to a variety of pipework, making it a versatile solution for a range of plumbing applications. However, it is important to note that the untrapped design of the gully means that odors and gases from the drainage system can enter the room, so proper ventilation is necessary to prevent unpleasant odors and gases from entering the room.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 2" BS EN 1329-1:2000 Solvent Weld Vertical Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
・ Manufactured in ABS to the highest quality
The McAlpine USG2-R125SS is a plumbing fixture that is designed to be used as a floor gully in wet room areas or shower areas. It features an untrapped gully with a 2" vertical outlet, making it suitable for use with standard 2" pipework.
The gully is made of high-quality materials that are resistant to corrosion and chemical damage, ensuring durability and longevity. It is designed to be installed into a pre-formed floor and features a removable grate for easy access to the waste trap below.
One of the key features of the McAlpine USG2-R125SS is that it is untrapped, meaning that there is no water trap or seal built into the fixture. While this can increase the risk of unpleasant odors and gases from the drainage system entering the room, it can also make it easier to maintain and clean the gully.
The 2" vertical outlet on the gully is designed to be compatible with standard plumbing fittings and pipework, allowing for easy installation and connection to the existing drainage system.
The McAlpine USG2-R125SS is suitable for use with tiled or concrete floors and can be used in both residential and commercial settings. It is a reliable and efficient plumbing fixture that is designed to provide effective drainage for shower and wet room areas.
Overall, the McAlpine Untrapped Gully With 2" Vertical Outlet USG2-R125SS is a high-quality plumbing fixture that is designed to provide efficient and reliable drainage for wet room areas or shower areas.
The McAlpine TSG52WH-NSC Two-Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. The clamp ring and cover plate provide a secure and durable cover for the gully.
Overall, the McAlpine TSG52WH-NSC Two-Piece 50mm Water Seal Trapped Gully is a reliable and sturdy product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the clamp ring and cover plate provide a secure and durable cover for the gully. The removable grid allows for easy access to the trap for maintenance, and the 50mm water seal helps to prevent foul odours from escaping through the drain.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52T6WH Two Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. The grid tile or grating is designed to be used with a tiled or finished floor surface, providing a discreet and attractive finish.
The TSG52T6WH model also includes a 6mm tile upstand, which helps to prevent water from seeping under the tiles and causing damage to the subfloor. This can be particularly useful in wet areas such as bathrooms and showers.
Overall, the McAlpine TSG52T6WH Two Piece 50mm Water Seal Trapped Gully is a high-quality product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the removable grid tile or grating provides easy access to the trap for maintenance. The tile/grating design also provides a discreet and attractive finish, and the inclusion of a 6mm tile upstand helps to prevent water damage to the subfloor.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52-T150SS Two Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. The grid tile or grating is designed to be used with a tiled or finished floor surface, providing a discreet and attractive finish.
Overall, the McAlpine TSG52-T150SS Two Piece 50mm Water Seal Trapped Gully is a durable and reliable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the removable grid tile or grating provides easy access to the trap for maintenance. The tile/grating design also provides a discreet and attractive finish for tiled or finished floor surfaces.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52SS-SL-SC Two-Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. Additionally, the gully includes a clamp ring and cover plate to provide a secure and hygienic seal.
Overall, the McAlpine TSG52SS-SL-SC Two-Piece 50mm Water Seal Trapped Gully is a durable and reliable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the clamp ring and cover plate provide a secure and hygienic seal. The only difference between this model and the McAlpine TSG52SS-SL-NSC is the type of cover plate used - the -SC model uses a screw-down cover plate, whereas the -NSC model uses a push-fit cover plate.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52SS-SL-NSC Two-Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required. Additionally, the gully includes a clamp ring and cover plate to provide a secure and hygienic seal.
Overall, the McAlpine TSG52SS-SL-NSC Two-Piece 50mm Water Seal Trapped Gully is a durable and reliable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the clamp ring and cover plate provide a secure and hygienic seal.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52-R125SS Two Piece 50mm Water Seal Trapped Gully is a plumbing product designed for use in commercial and industrial drainage systems.
This gully features a two-piece design, with a removable grid tile or grating that allows for easy access to the trap for cleaning and maintenance. The gully also has a 50mm water seal to prevent foul odours from escaping through the drain.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required.
Overall, the McAlpine TSG52-R125SS Two Piece 50mm Water Seal Trapped Gully is a durable and reliable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. Its two-piece design makes it easy to clean and maintain, while the removable grid tile or grating provides easy access to the trap for maintenance.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
McAlpine TSG50WH-NSC 50mm Water Seal Trapped Gully is a plumbing product manufactured by McAlpine, a leading supplier of plumbing and drainage products in the UK.
This gully is designed for use in commercial and industrial drainage systems, and features a 50mm water seal to prevent foul odours from escaping through the drain. The gully also includes a clamp ring and cover plate to provide a secure and hygienic seal.
The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows it to be connected to a range of drainage systems. The socket reducer can be easily removed if a larger diameter pipe is required.
Overall, the McAlpine TSG50WH-NSC 50mm Water Seal Trapped Gully is a reliable and durable product that is designed to ensure the smooth operation of commercial and industrial drainage systems. It is easy to install and maintain, and is made from high-quality materials to ensure long-lasting performance.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50T6WH is a 50mm water seal trapped gully that features a tile/grating with removable grid design. It is designed to be used in horizontal waste pipes with a 2" outlet, and comes with a 2" x 1½" socket reducer to enable it to be connected to 1½" waste pipes.
The trapped gully has a 50mm water seal, which prevents foul odours and gases from escaping through the waste pipe and into the building. The tile/grating with removable grid design provides easy access for cleaning and maintenance, ensuring that the trapped gully remains free from blockages and debris.
The TSG50T6WH is made from high-quality materials that are resistant to chemical corrosion and degradation, ensuring that it will last for many years. It is also compliant with all relevant building codes and regulations, making it suitable for use in residential and commercial properties.
Overall, the McAlpine TSG50T6WH trapped gully is a reliable and practical solution for preventing foul odours and gases from escaping through the waste pipe. Its durable construction and tile/grating with removable grid design make it a popular choice for use in a wide range of applications, including bathrooms, kitchens, and utility rooms.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50SS-SL-NSC is a 50mm water seal trapped gully that features a clamp ring and cover plate design. It is designed to be used in horizontal waste pipes with a 2" outlet, and comes with a 2" x 1½" socket reducer to enable it to be connected to 1½" waste pipes.
The trapped gully has a 50mm water seal, which prevents foul odours and gases from escaping through the waste pipe and into the building. The clamp ring and cover plate design provides a secure and watertight seal, ensuring that the trapped gully remains in place and prevents any leaks.
The TSG50SS-SL-NSC is made from high-quality materials that are resistant to chemical corrosion and degradation, ensuring that it will last for many years. It is also compliant with all relevant building codes and regulations, making it suitable for use in residential and commercial properties.
Overall, the McAlpine TSG50SS-SL-NSC trapped gully is a reliable and practical solution for preventing foul odours and gases from escaping through the waste pipe. Its durable construction and clamp ring and cover plate design make it a popular choice for use in a wide range of applications, including bathrooms, kitchens, and utility rooms.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50-R125SS is a 50mm water seal trapped gully that features a tile/grating with a removable grid. It is designed to be used in horizontal waste pipes with a 2" outlet, and comes with a 2" x 1½" socket reducer to enable it to be connected to 1½" waste pipes.
The trapped gully has a 50mm water seal, which prevents foul odours and gases from escaping through the waste pipe and into the building. The removable grid makes it easy to clean and maintain the trapped gully, ensuring that it remains in good working order for longer.
The TSG50-R125SS is made from high-quality materials that are resistant to chemical corrosion and degradation, ensuring that it will last for many years. It is also compliant with all relevant building codes and regulations, making it suitable for use in residential and commercial properties.
Overall, the McAlpine TSG50-R125SS trapped gully is a reliable and practical solution for preventing foul odours and gases from escaping through the waste pipe. Its durable construction and easy-to-clean design make it a popular choice for use in a wide range of applications, including bathrooms, kitchens, and utility rooms.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG2-R125SS is a type of trapped gully used in plumbing and drainage systems. It has a 75mm water seal, which helps to prevent foul odors and gases from entering the building. The gully comes with a tile/grating cover that is removable for easy cleaning and maintenance.
The gully has a vertical outlet with a diameter of 110mm and comes with a 110mm x 2" reducer, allowing it to be connected to a variety of piping systems. The reducer can be easily removed if a larger diameter pipe is required.
Overall, the McAlpine TSG2-R125SS is a versatile and reliable trapped gully that is suitable for a range of plumbing and drainage applications.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 75mm Water Seal
・ 110mm Vertical Outlet
・ Supplied with110mm x 2" BS EN 1329-1:2000 solvent spigot outlet
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG1WH-NSC is a trapped gully designed for use in plumbing systems. It features a water seal of 75mm to prevent the escape of foul air from the drainage system. The gully has a clamp ring and cover plate for easy installation and maintenance. It has a 2" horizontal outlet and a 2" x 1½" socket reducer, allowing for easy connection to a variety of pipes. The gully is finished in white for a clean, modern look.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 75mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG1-R125SS is a plumbing accessory designed for use in drainage systems. It is a 75mm water seal trapped gully that comes with a tile/grating with a removable grid. The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows for easy connection to various plumbing systems.
The trapped gully features a water seal that prevents the entry of foul odors and gases from the drainage system. The removable grid makes it easy to clean and maintain the gully, ensuring that it remains free from blockages and debris.
The gully is made of durable materials, ensuring long-lasting performance and resistance to corrosion. The tile/grating with a removable grid provides a secure and tight fit for the gully, ensuring that it remains in place during use.
The McAlpine TSG1-R125SS 75mm Water Seal Trapped Gully, Tile/Grating with Removable Grid, 2" Horizontal Outlet and 2" x 1½" Socket Reducer is easy to install and is suitable for use in both domestic and commercial plumbing systems. It provides reliable protection against foul odors and gases in the drainage system, making it an essential accessory in any plumbing installation.
・ Available with Polished Stainless Steel or White ABS tile or Circular Polished Stainless Steel grating
・ 75mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Tiled or stone floor gully suitable for concrete and suspended timber floors
The McAlpine TSG1-ANTI/LIG is a plumbing accessory designed for use in drainage systems. It is a 75mm water seal trapped gully that comes with a clamp ring and cover plate. The gully has a 2" horizontal outlet and a 2" x 1½" socket reducer, which allows for easy connection to various plumbing systems.
The trapped gully features an anti-syphon design that prevents the entry of foul odors and gases from the drainage system. The anti-syphon feature also prevents the gully from drying out and helps maintain the water seal.
The gully is made of durable materials, ensuring long-lasting performance and resistance to corrosion. The clamp ring and cover plate provide a secure and tight fit for the gully, ensuring that it remains in place during use.
The McAlpine TSG1-ANTI/LIG 75mm Water Seal Trapped Gully, Clamp Ring and Cover Plate, 2" Horizontal Outlet and 2" x 1½" Socket Reducer is easy to install and is suitable for use in both domestic and commercial plumbing systems. It provides reliable protection against foul odors and gases in the drainage system, making it an essential accessory in any plumbing installation.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 75mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine T28L is a straight connector designed to connect a 1 1/2-inch pipe or fitting in the McAlpine Surefit range to a Multifit or universal fitting. The T28L straight connector features a push-fit connection on one end that is compatible with the McAlpine Surefit range of plumbing fittings and pipes, and a compression connection on the other end that is designed to fit onto a Multifit or universal fitting.
The T28L straight connector is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to provide a watertight seal when connected to pipes or fittings. The push-fit connection on the Surefit end of the T28L connector allows for quick and easy installation, while the compression connection on the Multifit end provides a secure and reliable connection.
The T28L straight connector is designed specifically for use with the McAlpine Surefit range of plumbing fittings and pipes, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T28L straight connector is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety. The T28L straight connector is commonly used in plumbing installations where a Surefit pipe or fitting needs to be connected to a Multifit or universal fitting.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine T26L is a reducer set for use with the Surefit range of plumbing fittings and pipes made by McAlpine. The T26L reducer set includes two fittings: a 2-inch to 1 1/2-inch reducer and a 1 1/2-inch blank cap.
The 2-inch to 1 1/2-inch reducer features a push-fit connection on both ends, allowing for quick and easy installation. The reducer is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to provide a watertight seal when connected to two different sizes of pipes or fittings.
The 1 1/2-inch blank cap is designed to be used with the T26L reducer to seal off the end of a 1 1/2-inch pipe or fitting. The blank cap features a push-fit connection, which allows for quick and easy installation.
The T26L reducer set is designed specifically for use with the McAlpine Surefit system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T26L reducer set is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety. The T26L reducer set is commonly used in plumbing installations where a larger pipe needs to be reduced down to a smaller size, such as in a drain or waste pipe system.
・ Available in 3 sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine T18L is a straight connector fitting that is part of the Surefit range of push-fit plumbing fittings and pipes made by McAlpine. The T18L is designed to connect two 1 1/2-inch pipes in a straight line, without the need for special tools or adhesives.
The T18L connector features a push-fit connection on both ends, which allows for quick and easy installation. The connector is made of durable plastic, which is lightweight and corrosion-resistant, and is designed to create a watertight seal between the two pipes.
It's important to note that the T18L connector is designed specifically for use with the McAlpine Surefit system, and may not be compatible with other types of plumbing systems or fittings. Additionally, it's important to ensure that the T18L connector is used in accordance with any local plumbing codes and regulations to ensure proper installation and safety.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine T12S is a reducer fitting that connects a 1 1/2-inch pipe to a 1 1/4-inch pipe in a Surefit plumbing system. Surefit is a range of push-fit plumbing fittings and pipes made by McAlpine that are designed for quick and easy installation without the need for special tools or adhesives.
The T12S reducer is made of durable plastic and features a push-fit connection on both ends, allowing for easy installation and removal. It is designed to be used specifically with Surefit fittings and pipes, so it may not be compatible with other plumbing systems.
It's important to note that the T12S reducer is not designed for use with high-pressure or hot water systems, and should only be used in applications where the water pressure and temperature are within the specified limits for the Surefit system.
・ Available in 3 sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine T12R is a rubber reducer fitting that connects a 1 1/4-inch pipe to a 1-inch pipe. This reducer is designed for use with plastic pipes and features a push-fit connection, which makes installation quick and easy.
The T12R reducer is made of rubber, which allows it to absorb vibrations and noise from the pipes. It also provides some flexibility, which can be helpful in installations where the pipes may need to bend or flex slightly.
It's important to note that the size "28mm" is equivalent to 1 1/8 inches, so this reducer may not be a perfect fit for 1 1/4-inch and 1-inch pipes. However, the rubber material should allow for some flexibility to accommodate slight size differences.
・ Reduces 1¼" to 1"/28mm
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine SW45P is a 1½" centre pin sink waste with a 113mm stainless steel flange and a reducer waste with plug. It is designed to be used with most sinks and is suitable for use in domestic and commercial applications.
The centre pin sink waste features a stainless steel flange that is both durable and stylish, and is designed to provide a reliable seal against the sink. The waste features a reducer that allows it to be connected to waste pipes of different sizes, making it a versatile option.
The SW45P sink waste also comes with a plug that can be used to prevent water from flowing through the waste when required. This is useful for situations where the sink needs to be filled with water, such as when washing dishes or soaking laundry.
The sink waste is constructed from high-quality materials to ensure durability and long-lasting performance, and is easy to install. It is designed to be used with standard 1½" UK plumbing, and is compatible with most sink designs.
Overall, the McAlpine SW45P centre pin sink waste is a reliable and effective solution for ensuring that waste water flows away from the sink efficiently. Its versatile design and high-quality construction make it a popular choice among plumbing professionals and homeowners alike.
・ Available with Black ABS handle plug or Black PVC plug with CP chain and stay
・ 1½" BSP
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The 113mm polished stainless steel flange eliminates the problem of chrome plating deterioration
・ Manufactured in Polypropylene
The McAlpine ST28L-ISO is a 1 1/4" x 40mm multifit straight connector that is used in plumbing installations to connect two sections of pipe together.
The ST28L-ISO connector features a multifit design, which allows it to be used with a variety of different pipe sizes and types, making it a versatile option for many plumbing applications. The connector also has a 1 1/4" diameter on one end and a 40mm diameter on the other end, allowing it to join pipes of different sizes.
The connector is made from high-quality materials, ensuring its durability and longevity. It also features an ISO-9001 quality management system certification, which ensures that the connector is manufactured to the highest standards.
Overall, the McAlpine ST28L-ISO 1 1/4" x 40mm multifit straight connector is a specific plumbing fitting that is used to join two sections of pipe together. Its multifit design and high-quality materials make it a versatile and durable option for many plumbing applications.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
The McAlpine 1 1/4" Surefit X Multifit Straight Connector S28L is a plumbing component used to connect two pipes of different materials or sizes.
The Surefit X Multifit Straight Connector features a 1 1/4" push-fit connection on one end, which is compatible with McAlpine's Surefit range of push-fit pipes and fittings. The other end of the connector is a Multifit connection, which allows it to connect to a wide range of pipes with different diameters and materials, including copper, lead, plastic, and iron.
The S28L connector is made of high-quality materials and is designed to provide a reliable and long-lasting connection between pipes. It is easy to install without the need for special tools or adhesives, making it a popular choice among DIY enthusiasts and professional plumbers alike.
If you have any further questions or need additional information, please let me know.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine S18L is a 1 1/4" Surefit Straight Connector that is designed to provide a secure and reliable connection between two pipes in a plumbing system. The connector is suitable for use with 1 1/4" (32mm) waste pipes and is designed to be used with McAlpine's Surefit waste system.
The S18L Surefit Straight Connector is made from high-quality materials and is designed to be easy to install. It features a unique pushfit design that allows it to be quickly and securely attached to the waste pipe without the need for any additional tools or fittings. The connector is also compatible with other waste systems that use the same pipe diameter.
The McAlpine S18L Surefit Straight Connector is suitable for use in both domestic and commercial plumbing systems. Its robust construction and precision engineering ensure that it provides a secure and watertight connection that will last for many years.
Overall, the McAlpine S18L Surefit Straight Connector is an essential component for any plumbing installation that requires a reliable and easy-to-install connection between two pipes. Its high-quality construction, compatibility with McAlpine's Surefit waste system, and ease of installation make it a popular choice among plumbers and DIY enthusiasts alike.
・ Available in 1¼", 1½", and 2" sizes
・ Surefit Waste Fittings only suitable for McAlpine HDPE Waste Pipe
The McAlpine S16 is a trap inlet reducer designed to reduce the size of a plumbing trap inlet from 1 1/4" to 1". It is a small but important component that is used in plumbing installations to ensure a secure and watertight connection between the trap and the waste pipe.
The S16 trap inlet reducer is made from high-quality materials, ensuring that it is strong, durable, and long-lasting. It is designed to be easy to install and can be quickly and securely fitted onto a plumbing trap using standard plumbing tools.
The McAlpine S16 trap inlet reducer is suitable for use in a wide range of different plumbing systems, including those that use traps with different inlet sizes. It is commonly used in both residential and commercial plumbing installations and is a reliable and cost-effective solution for reducing the size of a trap inlet.
Overall, the McAlpine S16 trap inlet reducer is an essential component for any plumbing installation that requires a reduction in trap inlet size. Its high-quality construction and ease of use make it a popular choice among plumbers and DIY enthusiasts alike.
・ Available in 2 sizes
The McAlpine R5 ¾" Bent Overflow Tank Connector is a plumbing component designed to connect an overflow pipe to a water storage tank. It is similar to the straight overflow tank connector, but features a 135-degree bend to accommodate situations where the overflow pipe needs to be directed in a specific direction.
The R5 ¾" Bent Overflow Tank Connector is made from high-quality polypropylene material that is resistant to chemicals and corrosion. It features a ¾" connection that allows for the easy connection of an overflow pipe to a water storage tank.
One of the key features of the McAlpine R5 ¾" Bent Overflow Tank Connector is its compatibility with a wide range of water storage tanks. It is suitable for use with tanks made from various materials, including plastic, steel, and concrete. This makes it a versatile and reliable plumbing component for a wide range of plumbing applications.
The McAlpine R5 ¾" Bent Overflow Tank Connector is also designed with a sealed connection, which prevents leaks and ensures that the water storage tank remains properly pressurized. This feature helps to prevent damage to the tank and the surrounding plumbing system, and also ensures that the water supply remains safe for use.
Overall, the McAlpine R5 ¾" Bent Overflow Tank Connector is a reliable and durable plumbing component that is essential for maintaining the proper pressure and integrity of water storage tanks. Its compatibility with a wide range of tanks, along with its bent design, make it an excellent choice for a variety of plumbing applications where an overflow pipe needs to be directed in a specific direction.
・ Available in Pushfit or Universal Compression
The McAlpine R4 ¾" Straight Overflow Tank Connector is a plumbing component designed to connect an overflow pipe to a water storage tank. It is commonly used in residential and commercial plumbing applications to prevent water overflow and ensure that the water storage tank remains properly pressurized.
The R4 ¾" Straight Overflow Tank Connector is made from high-quality polypropylene material that is resistant to chemicals and corrosion. It features a ¾" connection that allows for the easy connection of an overflow pipe to a water storage tank.
One of the key features of the McAlpine R4 ¾" Straight Overflow Tank Connector is its compatibility with a wide range of water storage tanks. It is suitable for use with tanks made from various materials, including plastic, steel, and concrete. This makes it a versatile and reliable plumbing component for a wide range of plumbing applications.
The McAlpine R4 ¾" Straight Overflow Tank Connector is also designed with a sealed connection, which prevents leaks and ensures that the water storage tank remains properly pressurized. This feature helps to prevent damage to the tank and the surrounding plumbing system, and also ensures that the water supply remains safe for use.
Overall, the McAlpine R4 ¾" Straight Overflow Tank Connector is a reliable and durable plumbing component that is essential for maintaining the proper pressure and integrity of water storage tanks. Its compatibility with a wide range of tanks, along with its sealed connection, make it an excellent choice for a variety of plumbing applications where an overflow pipe needs to be connected to a water storage tank.
・ Available in Pushfit or Universal Compression
The McAlpine M/Fit Str Connector 1.1/4" S28M is a plumbing fitting used to connect two pipes together. Specifically, it is designed to connect two pipes with a 1.1/4" diameter using a compression fitting. The "M/Fit" designation indicates that the fitting can be used with either male or female pipe ends.
The S28M part of the name likely refers to the specific model or part number of the connector. McAlpine is a UK-based company that produces a wide range of plumbing products, including waste pipes, traps, and connectors like the M/Fit Str Connector.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe
The McAlpine M/Fit Str Connector 1.1/2" T28M is a plumbing fitting used to connect two pipes with a diameter of 1.1/2 inches. It is designed for use with solvent weld waste pipes and is commonly used in domestic and commercial plumbing systems.
The "M/Fit" part of the name stands for "McAlpine Fit," which is a type of fitting made by McAlpine, a UK-based plumbing company. The "Str Connector" refers to the straight connection between the two pipes, rather than a 90-degree angle or other configuration.
The "T28M" part of the name is a reference to the specific model number of the fitting. It is important to ensure that the fitting is compatible with the pipes you are working with and that it is installed correctly to avoid leaks or other plumbing issues.
・ Available in 1¼", 1½", and 2" sizes
・ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe
The McAlpine TSG52WH is a two-piece 50mm water seal trapped gully that is designed to be used in plumbing systems for waste water and sewage. The gully features a clamp ring and cover plate for secure installation, and a 2" horizontal outlet with a 2" x 1½" socket reducer for easy connection to other plumbing components.
The water seal trap is an essential feature of the gully, as it prevents unpleasant odours and gases from escaping through the drainage system and entering the living or working area. The trap works by retaining a small amount of water in the trap, which forms a barrier to the gases and odours.
The clamp ring and cover plate ensure that the gully is securely fixed in place, preventing any leaks or movement. The 2" horizontal outlet and 2" x 1½" socket reducer allow for easy connection to other plumbing components, such as pipes and fittings.
Overall, the McAlpine TSG52WH is a reliable and durable solution for waste water and sewage drainage systems, and is suitable for both commercial and domestic use.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG52-ANTI/LIG is a two-piece trapped gully that is designed for use in plumbing systems to prevent foul odors and gases from entering the building. It has a 50mm water seal that helps to maintain the water level in the trap and prevent odors from escaping through the drain.
The gully comes with a clamp ring and cover plate that can be easily removed for cleaning and maintenance purposes. It has a 2" horizontal outlet that is compatible with standard PVC pipework and a 2" x 1½" socket reducer that can be used to connect the gully to a range of different pipe sizes.
Overall, the McAlpine TSG52-ANTI/LIG is a reliable and durable option for anyone looking for a trapped gully to use in their plumbing system. Its anti-syphon design ensures that foul odors and gases are prevented from entering the building, while its easy-to-clean design makes it simple to maintain and keep in good condition.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" swivel outlet fitting and 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine TSG50SS-SL-SC 50mm Water Seal Trapped Gully is a plumbing component used in drainage systems to prevent odors and gases from entering the living or working space. It is designed with a 50mm water seal trap that blocks foul smells and provides a barrier against sewer gases. The trap also stops debris and other materials from entering the drain system.
The gully is equipped with a clamp ring and cover plate that secures the gully in place and provides access for maintenance and cleaning. The horizontal outlet measures 2 inches in diameter, while the socket reducer measures 2 inches by 1 1/2 inches, making it suitable for use in a range of drainage systems.
This type of gully is commonly used in commercial and industrial applications, as well as in residential settings where a higher level of protection against odors and gases is required. The McAlpine TSG50SS-SL-SC gully is made from high-quality materials to ensure durability and long-lasting performance.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 50mm Water Seal
・ 2" BS EN 1329-1:2000 Solvent Weld Horizontal Outlet
・ Supplied with 2" x 1½" socket reducer
・ Sheet floor gully suitable for concrete and suspended timber floors
The McAlpine MultiFit Reducer 1.1/2 X 1.1/4 ST28M-BL is a plumbing fitting used to connect two different sizes of pipes. This reducer is designed for use with plastic pipes and features a push-fit design, which means that it can be easily and quickly installed without the need for special tools or equipment.
The 1.1/2 X 1.1/4 size of this reducer means that it is designed to connect a 1.1/2" pipe to a 1.1/4" pipe. This can be useful in situations where two different sizes of pipes need to be connected, such as when installing a new plumbing system or making repairs to an existing system.
The McAlpine MultiFit Reducer 1.1/2 X 1.1/4 ST28M is made from high-quality materials, which ensures its durability and resistance to wear and tear. It is part of McAlpine's MultiFit range of fittings, which are designed to be compatible with plastic pipes.
Overall, the McAlpine MultiFit Reducer 1.1/2 X 1.1/4 ST28M is a reliable and efficient plumbing fitting that provides a secure and leak-free connection between two different sizes of plastic pipes. Its high-quality materials and push-fit design make it a popular choice for a wide range of plumbing applications.
_ Available in 1.25", 1.5", and 2" sizes
_ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:2017 and BS EN 1329-1:2020 and copper pipe and lead pipe
_ Manufactured in Polypropylene
The McAlpine MultiFit Straight Connector 1.1/4" S28M-BL is a plumbing fitting used to connect two pipes together. Specifically, it is designed to connect two pipes with a 1.1/4" diameter using a compression fitting. The "Multifit" designation indicates that the fitting can be used with either male or female pipe ends.
The S28M-BL part of the name likely refers to the specific model or part number of the connector. McAlpine is a UK-based company that produces a wide range of plumbing products, including waste pipes, traps, and connectors like the MultiFit Straight Connector. Colour: Black
_ Available in 1.25", 1.5", and 2" sizes
_ Multifit Fittings suit all plastic waste pipes to BS EN 1451-1:200 and BS EN 1329-1:2000, copper pipe and lead pipe
