1 x ITL Insulated Inspection Mirror. The ITL Insulated Inspection Mirror with bent hosel to help inspect hard to reach places. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation. Small
The ITL Insulated Nylon Hacking Knife built to remove insulation on live cables without risk of damaging the cable. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL Insulated Hacking Knife for removing insulation from live line cables. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL Insulated Coring Knife made with a sharp, curved blade designed to cut cable coating. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL Insulated Flat Rasp for turning down material. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
1 x ITL Insulated 3/8in Drive Extension 250mm (10in). The ITL Insulated 3/8in Drive Extensions are made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation. 250mm (10in)
1 x ITL Insulated 3/8in Drive Extension 75mm (3in). The ITL Insulated 3/8in Drive Extensions are made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation. 75mm (3in)
1 x ITL Insulated 3/8in Drive Extension 125mm (5in). The ITL Insulated 3/8in Drive Extensions are made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation. 125mm (5in)
The ITL Insulated 3/8in Drive Reversible Ratchet. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL Insulated 1/4in Drive Extension made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
1 x ITL Insulated 1/2in Drive Extension 250mm (10in). ITL Insulated 1/2in Drive Extensions are made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation. 250mm (10in)
The ITL Insulated 1/4in Drive Reversible Ratchet. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
1 x ITL Insulated 1/2in Drive Extension 125mm (5in). ITL Insulated 1/2in Drive Extensions are made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation. 125mm (5in)
The ITL Insulated 1/2in Drive Reversible Ratchet. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
1 x ITL Insulated 3/8in Drive Socket 17mm. The ITL Insulated 3/8in Drive Sockets are fully insulated and exceed international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 17mm
1 x ITL Insulated 3/8in Drive Socket 19mm. The ITL Insulated 3/8in Drive Sockets are fully insulated and exceed international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 19mm
1 x ITL Insulated 3/8in Drive Socket 13mm. The ITL Insulated 3/8in Drive Sockets are fully insulated and exceed international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 13mm
1 x ITL Insulated 1/2in Drive Deep Socket 24mm. The ITL Insulated 1/2in Deep Drive Sockets are fully insulated and exceeds international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 24mm
1 x ITL Insulated 1/2in Drive Deep Socket 23mm. The ITL Insulated 1/2in Deep Drive Sockets are fully insulated and exceeds international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 23mm
1 x ITL Insulated 1/2in Drive Deep Socket 22mm. The ITL Insulated 1/2in Deep Drive Sockets are fully insulated and exceeds international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 22mm
1 x ITL Insulated 1/2in Drive Deep Socket 21mm. The ITL Insulated 1/2in Deep Drive Sockets are fully insulated and exceeds international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 21mm
1 x ITL Insulated 1/2in Drive Socket 21mm. The ITL Insulated 1/2in Drive Sockets are fully insulated and exceeds international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 21mm
1 x ITL Insulated 1/2in Drive Deep Socket 20mm. The ITL Insulated 1/2in Deep Drive Sockets are fully insulated and exceeds international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 20mm
1 x ITL Insulated 1/2in Drive Socket 19mm. The ITL Insulated 1/2in Drive Sockets are fully insulated and exceeds international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 19mm
