1 x ITL Insulated 1/2in Drive Deep Socket 12mm. The ITL Insulated 1/2in Deep Drive Sockets are fully insulated and exceeds international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 12mm
1 x ITL Insulated 1/2in Drive Deep Socket 11mm. The ITL Insulated 1/2in Deep Drive Sockets are fully insulated and exceeds international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 11mm
1 x ITL Insulated 1/2in Drive Deep Socket 10mm. The ITL Insulated 1/2in Deep Drive Sockets are fully insulated and exceeds international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 10mm
1 x ITL Insulated 1/2in Drive Socket 10mm. The ITL Insulated 1/2in Drive Sockets are fully insulated and exceeds international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 10mm
1 x ITL Insulated General Purpose Open End Spanner 22mm. The ITL Insulated General Purpose Open End Spanners are made from injection moulded nylon 11 which exceeds the requirements of IEC 60900, the industry standard for live line working. Only the handle is insulated to allow access into tight spaces. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation, plus a 30 day no quibble money back guarantee. 22mm
1 x ITL Insulated General Purpose Open End Spanner 8mm. The ITL Insulated General Purpose Open End Spanners are made from injection moulded nylon 11 which exceeds the requirements of IEC 60900, the industry standard for live line working. Only the handle is insulated to allow access into tight spaces. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation, plus a 30 day no quibble money back guarantee. 8mm
1 x ITL Insulated Groove Joint Pliers 420mm (16in). The ITL Insulated Groove Joint Pliers made with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. 420mm (16in)
1 x ITL Insulated Cable Cutters 250mm (10in). The ITL Insulated Cable Cutters made for cutting aluminium and copper cables only. They have injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. 250mm (10in)
1 x ITL Insulated Groove Joint Pliers 305mm (12in). The ITL Insulated Groove Joint Pliers made with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. 305mm (12in)
1 x ITL Insulated Cable Cutters 230mm (9in). The ITL Insulated Cable Cutters made for cutting aluminium and copper cables only. They have injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. 230mm (9in)
The ITL Insulated High Leverage Diagonal Cutters, 190mm, for cutting piano wire. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL Insulated Bent Nose Pliers, 200mm, made with a tapered and bent jaw for those hard to reach places. Multi-use with cutter for hard, soft and piano wire. Fitted with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL Insulated Linesman 240mm Pliers made with a large jaw. Ideal for gripping round and flat surfaces, includes a cutter for soft, hard and piano wire. Also includes a crimper. Fitted with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL Insulated Combination Pliers, 250mm, are made for gripping flat and round material. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL 10 Piece Insulated 3/8in Drive Metric Torque Wrench Kit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 8 x Metric Sockets: 8, 10, 12, 13, 14, 17, 19, 22mm. 1 x Extension Bar 127mm (5in). 1 x 3/8in Drive Torque Wrench 12-60Nm.
The ITL 10 Piece Insulated 1/2in Drive Imperial Torque Wrench Kit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 8 x Imperial Sockets: 5/16, 3/8, 7/16, 1/2, 9/16, 11/16, 3/4, 7/8in AF. 1 x Extension Bar 127mm (5in). 1 x 1/2in Drive Torque Wrench 12-60Nm.
This ITL 10 Piece Insulated 1/2in Drive Metric Torque Wrench Kit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 8 x Metric Sockets: 8, 10, 12, 13, 14, 17, 19, 22mm. 1 x Extension Bar 127mm (5in). 1 x 1/2in Drive Torque Wrench 12-60Nm.
The ITL 7 Piece Insulated 1/2in Drive Imperial Torque Wrench Kit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 5 x Imperial Sockets: 3/8, 7/16, 1/2, 5/8, 3/4, 1in AF. 1 x Extension Bar 127mm (5in). 1 x 1/2in Drive Torque Wrench 12-60Nm.
ITL 9 Piece Insulated General Purpose Toolkit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC Supplied in a tool roll, contains: 1 x Snipe Nose Pliers 150mm (6in). 1 x Combination Pliers 200mm (8in). 1 x Cable Cutters 200mm (8in). 1 x Adjustable Spanner 200mm (8in). 1 x Slotted Terminal Screwdriver 3 x 75mm. 2 x Phillips Screwdrivers: PH1 x 75mm, PH2 x 100mm. 2 x Slotted Screwdrivers: 5 x 150mm, 6.5 x 150mm.
The ITL 20 Piece Insulated Deluxe Tool Kit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 1 x Snipe Nose Pliers 150mm (6in). 1 x Combination Pliers 200mm (8in). 1 x Diagonal Cutters 150mm (6in). 1 x Cable Cutters 200mm (8in). 1 x Groove Joint Pliers 250mm (10in). 1 x Adjustable Spanner 200mm (8in). 1 x Slotted Terminal Screwdriver 3 x 75mm. 2 x Pozidrive Screwdrivers: PZ1 x 75mm, PZ2 x 100mm. 2 x Slotted Screwdrivers: 5 x 150mm, 6.5 x 150mm. 4 x Open Ended Spanners: 13, 17, 19, 24mm. 3 x Offset Ring Spanners: 13, 17, 19mm. 1 x Coring Knife.
