The DEWALT Moulding Bar has an extra wide head, 40% wider than standard moulding bars, that helps prevent wall damage when prying trim or moulding or pulling nails. The extra wide strike surface and flat prying end help the user accurately strike the bar to get under a nail or behind material to pry. An i-beam shaft provides strength without adding weight.
The DEWALT Club Hammer has a concentrated strike face, this hammer gives the user a clean and effective break. It can easily withstand some of the harshest jobsites out there with its durable, one-piece steel construction. Fitted with an ergonomic grip for added user comfort.
The DEWALT Steel Camper’s Axe features a scalloped cutting edge to make it easy to release from material. With its one-piece steel construction, this axe can easily withstand the harshest environments. It comes with a plastic sheath for added safety, and to keep your blade protected.
The DEWALT Mig Weld Rip Claw Hammer has an all steel design for durability and long life. Its lightweight design produces a fast swinging and reduced fatigue. It produces the same impact as a 794g (28oz) hammer. Fitted with a vibration absorbing grip for improved user comfort. It also features a magnetic nail starter for easy, one-handed nail placement.
The DEWALT Curve Claw Hammer has a one piece steel construction and thick, heat treated steel shaft for all round jobsite durability. Its optimal weight distribution provides a controlled swing. Tri-pull technology allows you to remove finish nails, framing nails, and staples. Fitted with a soft grip handle for added comfort. It also features a nail start system for quick, one-handed nail placement.
1 x DEWALT Curve Claw Smooth Face Hammer 567g (20oz).
The DEWALT Rip Claw Demolition Hammer has a one piece steel construction and thick, heat treated steel shaft for all round jobsite durability. Its optimal weight distribution provides a controlled swing. Fitted with a soft grip handle for added comfort. It also features a multi-use side nail puller and a ripping edge to facilitate drywall demolition.
The DEWALT Rip Claw Hammer has a one piece steel construction and thick, heat treated steel shaft for all round jobsite durability. Its optimal weight distribution provides a controlled swing. Fitted with a soft grip handle for added comfort. It also features a multi-use side nail puller for efficient and easy pulling.
1 x DEWALT Rip Claw Smooth Face Hammer 624g (22oz).
The DEWALT Torpedo Level has an extruded aluminIum body with rare earth magnets and a V-Groove base for use on metal and rounded surfaces. Its solid block vials provide durability and accuracy to 0.5mm/m. Virtually unbreakable, the vials are factory set and require no further adjustment. The centre vial is magnified for readability. Fitted with shockproof end caps, manufactured from an ABS plastic core with over-molded TPR rubber to provide best shock resistance.
The DEWALT Rip Claw Hammer has a one piece steel construction and thick, heat treated steel shaft for all round jobsite durability. Its optimal weight distribution provides a controlled swing. Fitted with a soft grip handle for added comfort. It also features a multi-use side nail puller for efficient and easy pulling.
1 x DEWALT Rip Claw Smooth Face Hammer 567g (20oz).
The DEWALT Rip Claw Hammer has a one piece steel construction and thick, heat treated steel shaft for all round jobsite durability. Its optimal weight distribution provides a controlled swing. The milled face aids gripping of the nail head when striking. Fitted with a soft grip handle for added comfort. It also features a multi-use side nail puller for efficient and easy pulling.
The DEWALT Curve Claw Hammer has a one piece steel construction and thick, heat treated steel shaft for all round jobsite durability. Its optimal weight distribution provides a controlled swing. Tri-pull technology allows you to remove finish nails, framing nails, and staples. Fitted with a soft grip handle for added comfort. It also features a nail start system for quick, one-handed nail placement.
1 x DEWALT Curve Claw Smooth Face Hammer 454g (16oz).
The DEWALT Rip Claw Hammer has a one piece steel construction and thick, heat treated steel shaft for all round jobsite durability. Its optimal weight distribution provides a controlled swing. Fitted with a soft grip handle for added comfort. It also features a multi-use side nail puller for efficient and easy pulling.
1 x DEWALT Rip Claw Smooth Face Hammer 454g (16oz).
The DEWALT Box Beam Level offers accuracy with its solid block vials and durability with its large cross section and metal, and robust over moulded end caps. All sizes feature 2 vertical vials and 1 horizontal vial for versatility in levelling. The die cast centre vial holder maintains level accuracy under abusive work conditions. The centre vial is also magnified for maximum vial readability.The carry hand holes and hang holes on both ends make it easy to use, transport and store. Other features include; bridged centre vials for a continuous working edge and body rigidity and 2 milled surfaces for 0.5mm/m accuracy on 2 faces of the level.Specifications:Accuracy: ± 0.5mm/m.
1 x DEWALT Box Beam Level 120cm.
The DEWALT Rafter Layout Square has an extra-thick, extruded aluminium body that holds up to heavy-duty use, ideal for use as saw guide. With stamped-in contrasting colour graduations for better readability. The fixed large base helps provide better grip on materials. It also features scribe line notches for marking rip cuts. Easy to use, a pivot point makes marking out angles easy. With scales of top cuts; common jack rafters, hip and valley rafters for versatility.
1 x DEWALT Rafter Layout Square 7in.
The DEWALT Box Beam Level offers accuracy with its solid block vials and durability with its large cross section and metal, and robust over moulded end caps. All sizes feature 2 vertical vials and 1 horizontal vial for versatility in levelling. The die cast centre vial holder maintains level accuracy under abusive work conditions. The centre vial is also magnified for maximum vial readability.The carry hand holes and hang holes on both ends make it easy to use, transport and store. Other features include; bridged centre vials for a continuous working edge and body rigidity and 2 milled surfaces for 0.5mm/m accuracy on 2 faces of the level.Specifications:Accuracy: ± 0.5mm/m.
1 x DEWALT Box Beam Level 180cm.
The DEWALT Box Beam Level offers accuracy with its solid block vials and durability with its large cross section and metal, and robust over moulded end caps. All sizes feature 2 vertical vials and 1 horizontal vial for versatility in levelling. The die cast centre vial holder maintains level accuracy under abusive work conditions. The centre vial is also magnified for maximum vial readability.The carry hand holes and hang holes on both ends make it easy to use, transport and store. Other features include; bridged centre vials for a continuous working edge and body rigidity and 2 milled surfaces for 0.5mm/m accuracy on 2 faces of the level.Specifications:Accuracy: ± 0.5mm/m.
1 x DEWALT Box Beam Level 60cm.
The DEWALT Rafter Layout Square has an extra-thick, extruded aluminium body that holds up to heavy-duty use, ideal for use as saw guide. With stamped-in contrasting colour graduations for better readability. The fixed large base helps provide better grip on materials. It also features scribe line notches for marking rip cuts. Easy to use, a pivot point makes marking out angles easy. With scales of top cuts; common jack rafters, hip and valley rafters for versatility.
1 x DEWALT Rafter Layout Square 12in.
The DEWALT Compact Series Tape Measure easily fits in your hand, tool box or pocket. The durable, coated steel blade is ideal for use in tough conditions. 3m of extended reach allows easy one person work. It also enables you to measure without blade kinking. Fitted with a finger brake for ultimate blade control, helping you to get the job done quickly and easily.Accuracy: EC Class II.
1 x DEWALT Compact Series Tape Measure 8m (Width 28mm) (Metric Only).
The DEWALT TOUGHSERIES Tape Measure allows you to conveniently measure from any angle. The double-sided blade features a Rip-Shield blade coating that provides increased durability. 16ft of extended reach allows you to easily execute long measurements without assistance. Its ultra-tough housing keeps the tape safe and secure. It's able to survive drops up 30 metres. Fitted with a magnet for easy attachment and measuring from metal surfaces.Accuracy: EC Class II.
1 x DEWALT TOUGHSERIES Tape Measure 8m (Width 32mm) (Metric Only).
The DEWALT Compact Series Tape Measure easily fits in your hand, tool box or pocket. The durable, coated steel blade is ideal for use in tough conditions. 3m of extended reach allows easy one person work. It also enables you to measure without blade kinking. Fitted with a finger brake for ultimate blade control, helping you to get the job done quickly and easily.Accuracy: EC Class II.
1 x DEWALT Compact Series Tape Measure 5m (Width 28mm) (Metric Only).
The DEWALT TOUGHSERIES Tape Measure allows you to conveniently measure from any angle. The double-sided blade features a Rip-Shield blade coating that provides increased durability. 16ft of extended reach allows you to easily execute long measurements without assistance. Its ultra-tough housing keeps the tape safe and secure. It's able to survive drops up 30 metres. Fitted with a magnet for easy attachment and measuring from metal surfaces.Accuracy: EC Class II.
1 x DEWALT TOUGHSERIES Tape Measure 5m (Width 32mm) (Metric Only).
The DEWALT Metric Speed Square has an extra-thick, extruded aluminium body that holds up to heavy-duty use, ideal for use as saw guide. With stamped-in contrasting colour graduations for better readability. The fixed large base helps provide better grip on materials. It also features scribe line notches for marking rip cuts.
1 x DEWALT Metric Speed Square 18cm.
DEWALT Hacksaw Blades have a bi-metal construction that combines the flexibility of a carbon steel body, with the cutting performance from the high speed steel teeth. They cut most metals including unhardened tool steel and stainless steel.This 3 Piece Pack contains: 1 x Hacksaw Blade 300mm x 18 TPI, 1 x Hacksaw Blade 300mm x 24 TPI, 1 x Hacksaw Blade 300mm x 32 TPI.
The DEWALT Metric Speed Square has an extra-thick, extruded aluminium body that holds up to heavy-duty use, ideal for use as saw guide. With stamped-in contrasting colour graduations for better readability. The fixed large base helps provide better grip on materials. It also features scribe line notches for marking rip cuts.
1 x DEWALT Metric Speed Square 30cm.
The DEWALT Steel Long Tape Measure has a 12mm steel mylar-coated blade with both metric and imperial graduations. The blade is corrosion resistant for added durability. A dirt removal window makes it easy to keep the tape clean and free from debris. The long tape's stainless-steel crank arm provides durability for demanding job-sites. A blade-release button and a 5-to-1 gear ratio for fast blade rewinds for efficiency. It also features a spring-loaded carabiner attachment offers great portability.Specifications:Blade Length: 30m/100ft.Blade Width: 12mm.
The DEWALT 5-in-1 Hacksaw has a low profile which enables users to make cuts in tight spaces. High tension securely holds the blade, up to 150kg. The blade can be set to 45 or 90 degrees for standard and flush cuts. Fitted with a comfortable non-slip handle and front grip ensures positive handling and control. The hacksaw front handle can become a pistol grip jab saw. You can also attach a long reach blade to the front frame. It also features on-board blade storage.Specification:Overall Length: 300mm.
The DEWALT Side Strike Chisel can be used for demolition and scraping. The hardened, tempered chrome carbon-steel blade has a serrated cutting edge. There is also a cutting edge on the side of blade for demolition work, also allows the chisel to double as a scraper. Fitted with an ergonomically designed bi-material handle and a hardened strike cap for durability.
The DEWALT Push and Flip Folding Utility Knife has been ergonomically designed to be carried comfortably on tough jobs. It features a simple, one-handed flip-to-open operation. Engineered with a metal handle for durability, this knife delivers high-performance for a variety of demanding tasks.A quick-slide-and-click blade replacement system helps blade retention and helps prevent unintentional blade release. It also features a reversible deep carry wire pocket clip and integrated tether hole, ideal when working at height. Supplied with 1 blade.
The DEWALT Ergo Aviation Snips were designed with a reduced handle span, providing lower level of muscle effort required while cutting tough materials. Traditionally used for cutting aluminium, vinyl siding, screening, cardboard, leather, copper and 18 to 22-Gauge sheet metal. The snip's serrated cutting edge prevent materials from slipping during use and the slip-resistant, bi-material cushion grip ensures a firm, comfortable grip.
1 x Pair of DEWALT Right Cut Ergo Aviation Snips.
DEWALT Folding Jab Saw conveniently allows for both drywall cutting and plane cutting with one tool. The jab saw has triple ground teeth for fast cutting, cuts up to 50% faster than traditional tooth designs. The rasp is made from durable stainless steel for material removal.Fitted with an ergonomic bi-material handle for extra comfort. Both the saw and the rasp fold into the handle for compact storage. A locking mechanism locks blade in open and close positions.
The DEWALT Ergo Aviation Snips were designed with a reduced handle span, providing lower level of muscle effort required while cutting tough materials. Traditionally used for cutting aluminium, vinyl siding, screening, cardboard, leather, copper and 18 to 22-Gauge sheet metal. The snip's serrated cutting edge prevent materials from slipping during use and the slip-resistant, bi-material cushion grip ensures a firm, comfortable grip.
1 x Pair of DEWALT Straight Cut Ergo Aviation Snips.
DEWALT Wood Chisels has a hardened, tempered chrome carbon-steel blade for edge retention. The blade has been lacquered for corrosion protection. Fitted with an ergonomically designed bi-material handle and a hardened strike cap for durability.
4 Piece Wood Chisel Set.Contains one of each size: 6, 13, 19, 25mm (1/4, 1/2, 3/4, 1in).
DEWALT Push and Flip Folding Utility Knife with Storage. Ergonomically designed to be carried comfortably on tough jobs, this knife features a one-handed flip-to-open operation and 5-blade on-board storage. Engineered with a metal handle for durability, this knife delivers high-performance for a variety of demanding tasks.A quick-slide-and-click blade replacement system helps blade retention and helps prevent unintentional blade release. It also features a reversible deep carry wire pocket clip and integrated tether hole, ideal when working at height. Supplied with 1 blade.
The DEWALT Drop Point Folding Pocket Knife has an extra long blade, 3.3 inches, making it ideal for more demanding jobs. This knife features smooth, flip-to-open operation. Engineered with a slim metal handle for durability and comfort, this knife delivers high-performance for a variety of demanding tasks. A secure liner lock helps avoid accidents. It has a reversible deep carry wire pocket clip and an integrated tether hole, ideal when working at height.Specifications:Blade Length: 8.3cm (3.3in).
The DEWALT Ergo Aviation Snips were designed with a reduced handle span, providing lower level of muscle effort required while cutting tough materials. Traditionally used for cutting aluminium, vinyl siding, screening, cardboard, leather, copper and 18 to 22-Gauge sheet metal. The snip's serrated cutting edge prevent materials from slipping during use and the slip-resistant, bi-material cushion grip ensures a firm, comfortable grip.
1 x Pair of DEWALT Left Cut Ergo Aviation Snips.
The DEWALT TOUGHSERIES Retractable Utility Knife has a slider mechanism that delivers 2X longer life and debris resistance. Engineered to provide durability in harsh conditions, this TOUGHSERIES knife helps limit blade tear out via a secure blade lock, that retains the blade whilst cutting.It has a durable zinc construction, ideal for harsh jobsites. The ergonomic work handle fits comfortably in your hand. The slide-and-click blade changing system is quick and easy to use, insert blades with the press-free blade changing system. There is also convenient onboard storage for up to 10 blades.Supplied with 1 blade.
