The DEWALT DCV100 XR Compact Jobsite Blower has a compact and lightweight design that is ideal for jobsite clean-up. Variable speed slider switch with variable speed trigger and a lock-on/off switch for improved control. Supplied with inflator/deflator attachments for versatile applications. Bare Unit, No Battery or Charger Supplied. Specification Max Airflow: 80m/sec.Air Speed: 18,000/min.Weight: 1.3kg.
The DEWALT DCM572 FlexVolt XR Blower has a highly efficient brushless motor that delivers up to 15 minutes run time (with a 3.0Ah battery). Allowing you to clear more debris, quickly. Its variable speed trigger with lock allows full power control without having to hold down the trigger. The curved tube design creates rotational control and reduces fatigue. Supplied with a concentrator attachment that increases force for stubborn debris. DCM572X1: 1 x 18/54 Volt 9.0/3.0Ah FlexVolt Li-Ion Battery.DCM572N: Bare Unit, No Battery or Charger. Specification Max Air Flow: 195km/h (121mph).Speed: Variable Speed Trigger.Weight: 4.5kg.The DEWALT DCM572 FlexVolt XR Blower is supplied as a Bare Unit, NO battery or charger.
The Metabo H16-500 heat gun has a powerful motor with optimum device cooling with 2 heating and 3 blower levels. The ergonomic design and rubber-coated handle provides ideal handling and a safe stationary application due to large non-slip floor space. Ideal for many applications including:- Dust-free removal of all metal and wood varnished coats.- Drying fresh varnished coats and filler compounds.- Thawing frozen water pipes etc.- Crimping cable ends.- Repairing welding tents, boats and other similar applications. High service life due to easy-to-clean air filter. Specifications:Air volume: 240 / 450 L/min.Air temperature: 300 / 500 ° C.Rated input power: 1.600W.Weight (without power cable): 700 g. Supplied with wide jet nozzle (50 mm), reducing nozzle (20mm), and plastic carry case.
The Steinel HL Scan measures the temperature of the workpiece surface whilst working on it with a hot air tool. An acoustic signal sounds as soon as heat either exceeds or falls below the ideal temperature. Its display also shows whether workpiece surface is too hot or too cold. Red means too hot, green means ideal temperature and blue means too cold. The HL Scan can be fitted to hot air tools HL1920E, 2020E, HG2120E and HG2320E. The warning tolerance range can be selected to suit individual needs. If chosen, the visual and acoustic warning can be deactivated. Temperature Measurement Range: 0-300°C.Optimum Distance From Workpiece: 15cm.Battery: 9 Volt (included).
The HiKOKI RB40VA Blower is used for clearing dust from the work area and can be used in either blower or dust collection modes. It is fitted with a high efficiency fan for increased output air volume and a variable speed motor. With external brush caps for rapid checking and replacement. The soft grip wrap around handle provides increased user comfort and ease of use at any angle. Supplied with: 1 x Dust Bag, 1 x Nozzle. Specification: Input Power: 550WNo Load Speed: 0-16,000/min.Air Volume: 0-3.8m³/min.Weight: 1.7kg1 x HiKOKI RB40VA/J2 Blower 110V version.
The Steinel HG2320E LCD Heat Gun offers a digital precision tool for temperature-critical materials. The ceramic heaters temperature can be infinitely varied over a range of 80-650°C at the thumbwheel. Integrated thermal cut-out eliminates the risk of overheating. Airflow can be controlled in 2 stages from 150–500 l/min. Its LCD display shows temperature in 10°C steps, includes heat build-up warning function and residual-heat indicator. Fitted with a brushless motor, rated for over 1,000 hours of operation and an optimised weight balance with ergonomically shaped, soft inlay handle that permits fatigue-free work. The 3m cable provides greater freedom of movement, for high demanding workloads. To ensure a reliable work process, the LOC function can be used to lock all settings on the tool. Service-friendly, the power cord can be changed without opening the enclosure. Specification Input Power 240v: 2,300W.110v: 1,400W.Airflow: 150–500 L/min.Air Temperature: 80-650°C .Weight: 1.03kg.The Steinel HG2320E LCD Heat Gun 1,400 Watt 110 Volt Version.
The Black and Decker KX1650 Heat Gun is ideal for stripping paint, varnish and adhesives. It has a built-in stand, for hands free applications and cooling, and has 2 heat and airflow settings for more control in different applications. Specification Input Power: 1,750W. Airflow: 570-740 L/min.Temperature Range: 460-600°C.Cable Length: 2m.
The Steinel HL1620S 2-stage Airflow Heat Gun is an indispensable all-rounder. It has a 2-stage temperature setting and is ideal for drying plasterwork, shrinking on cable sleeves, thawing frozen water pipes, stripping paint, waxing skis and snowboards and much more. This hot air tool has an optimised centre of gravity for fatigue-free working with one hand. It has an integrated thermal cut-out to prevent overheating. Specification Input Power: 1,600W.Airflow: 240 L/min.Air Temperature: 300-500°C.Weight: 0.67kg.
The DEWALT DCE530 XR Cordless Heat Gun can be used for a multitude of applications on site, such as: shrinking electrical tubing, bending PVC pipes, drying materials, loosening nuts and bolts etc. It has a compact design that is easy to use. The lock-on button allows the heat gun to be kept on, improving user comfort and enabling hands-free use. It also has a lock-off safety switch which prevents the trigger from being activated accidentally during transport or storage. Supplied as a Bare Unit, no battery or charger supplied. Includes 1 x Reflector Nozzle and 1 x Surface Nozzle. Specification: Airflow: 109-190L/min. Air Temperature: 290-530°CWeight: 0.5kg
The Steinel HG2320E LCD Heat Gun offers a digital precision tool for temperature-critical materials. The ceramic heaters temperature can be infinitely varied over a range of 80-650°C at the thumbwheel. Integrated thermal cut-out eliminates the risk of overheating. Airflow can be controlled in 2 stages from 150–500 l/min. Its LCD display shows temperature in 10°C steps, includes heat build-up warning function and residual-heat indicator. Fitted with a brushless motor, rated for over 1,000 hours of operation and an optimised weight balance with ergonomically shaped, soft inlay handle that permits fatigue-free work. The 3m cable provides greater freedom of movement, for high demanding workloads. To ensure a reliable work process, the LOC function can be used to lock all settings on the tool. Service-friendly, the power cord can be changed without opening the enclosure. Specification Input Power 240v: 2,300W.110v: 1,400W.Airflow: 150–500 L/min.Air Temperature: 80-650°C .Weight: 1.03kg.1 x Steinel HG2320E LCD Heat Gun 2,300 Watt 240 Volt Version.
The Steinel HG2420E Industrial Barrel Grip Heat Gun has a powerful brush motor with 1,000 hours of motor life. The temperature can be adjusted electronically via a thumb wheel, in nine stages from 80-650°C. At the same time, the airflow rate varies from 150-400L/Min. The tool also features a fine dust filter to protect the internal components. The tool is also particularly easy to service, the heavy-duty power cord can easily be changed on site cutting downtime. Specification Input Power: 2,200W.Airflow: 150-400 L/min.Air Temperature: 80-650°C.Weight: 0.61kg.Steinel HG2420E Industrial Barrel Grip Heat Gun 110 Volt Version.
The DEWALT D26411 Heatgun has a durable design with added protection for the heating element. Lightweight ergonomics and a compact design increase comfort during application. The Heatgun has 2 airflows to maximise control in most applications. It comes with a large stable support stand to ensure safety in staionary applications and is supplied with 2 cone attachments to increase versatility for specific applications. Applications: Stripping paint.Shrinking packaging and wrapping. Softening adhesives and removing stickers. Automotive applications. Moulding and welding plastics. Softening metal pipes for bending. Shrinking cable ends. Loosening nuts and bolts. Thawing frozen water pipes. Specification Input Power: 1,800W. Airflow: 250/450 L/min. Air Temperature: 50-400C/50-600°CLength: 253mm. Height: 210mm.Weight: 0.8kg.
The Steinel HL2020E 3-Stage Airflow LCD Heat Gun deliveres a hot air temperature of up to 630°C. The current working temperature and airflow rate is indicated on the LCD display which is easy to read at any light level. The tool immediately responds to heat build-up by indicating a warning triangle on the display. Fitted with a residual heat indicator that warns that the delivery nozzle is still hot and can cause burns even long after the tool has been unplugged. It features professional technology for shaping tiles, desoldering circuit boards, welding plastics, drying repair filler, shrinking cable sleeves, soldering pipes and much more. Supplied with: 1 x 9mm Reduction Nozzle and 1 x Case. Specification Input Power: 2,200 Watt.Air Flow: 150/150-300/300-500 l/min.Air Temperature: 80-630°C.Weight: 0.88kg.
The Steinel HL1920E 3-Stage Airflow Heat Gun is a versatile tool with infinitely adjustable temperature in 3 airflow stages. It is ideal for removing and welding sheetings, welding plastics, shrinking on cable sleeves, shaping, soldering, drying, thawing, stripping paint and much more. This hot air tool has an optimised centre of gravity, making it particularly easy to use with just one hand. Specification Input Power: 2,000 Watt.Airflow: 150/150-300/300-500 l/min.Air Temperature: 80-600°C.Weight: 0.84kg.
The Steinel HG2620E Barrel Heat Gun is electronically controlled with infinite digital temperature adjustment via its joystick to provide excellent performance and precision. Airflow rate is also continuously adjustable. Features an LCD display showing the temperature in 10°C steps. Its residual heat indicator ensures maximum working safety and the integrated thermal cut-out prevents overheating. In addition, an integrated fine dust filter, ergonomically shaped handle and magnesium guard sleeve ensure work safety. Its brushless motor is rated for 10,000 hours operation. This tool is very user-friendly when it comes to servicing; both the element and the power cord can be easily changed by the user on site. Comes in a large, robust carry case, suitable to fit in many of the nozzles and other accessories. Specification: Input Power: 2,300WAir Flow: 150-500 L/min.Air Temperature: 50-700°CWeight: 0.84kgSteinel HG2620E Barrel Heat Gun 2300W 240V Version
The Steinel HG2420E Industrial Barrel Grip Heat Gun has a powerful brush motor with 1,000 hours of motor life. The temperature can be adjusted electronically via a thumb wheel, in nine stages from 80-650°C. At the same time, the airflow rate varies from 150-400L/Min. The tool also features a fine dust filter to protect the internal components. The tool is also particularly easy to service, the heavy-duty power cord can easily be changed on site cutting downtime. Specification Input Power: 2,200W.Airflow: 150-400 L/min.Air Temperature: 80-650°C.Weight: 0.61kg.Steinel HG2420E Industrial Barrel-Grip Heat Gun 240 Volt Version.
The Steinel HL1820S Pistol Grip Heat Gun has a powerful motor with approximately 600 hours of motor life. Both temperature and air flow rate is controlled in three stages. It has a balanced, lightweight design and an ergonomically shaped handle with a soft inlay that ensures optimum handling. There is also an integrated thermal cut-out that prevents over heating. The tool can be used with all industry standard nozzles, making all sorts of different applications even easier. For example de-icing, drying, shaping, heat shrinking and much more. Specification Input Power: 1,800W.Airflow: 200/300/500 L/minAir Temperature: 50/400/600°C.Weight: 0.8kg.Steinel HL1820S Pistol Grip Heat Gun 110 Volt Version.
The DEWALT D26414 digital LCD durable Heat Gun are suitable for professional applications with excellent temperature control and memory setting for consistent temperature requirements. It has optimised cooling and is compact and lightweight for easy handling and use. It is suitable for the following applications: - Stripping old paint.- Drying new coats of paint filler.- Varnish applications.- Re-melting adhesives/removing stickers.- Soft soldering pipes.- Moulding and welding plastics.- Applying tin-plate coatings and similar jobs.- Shrinking cable ends, foil and sleeves.- Welding applications, lighting barbecues.- Thawing frozen water pipes, ski waxing etc. Supplied with: Cone Nozzle and Fish Tail Surface Nozzle. Specification Input Power: 1,600W.Airflow: 650 L/minAir Temperature: 50-600°C.Weight: 0.85kg.DEWALT D26414 LCD Premium Heat Gun 2000W 240V Version.
The DEWALT DCM572 FlexVolt XR Blower has a highly efficient brushless motor that delivers up to 15 minutes run time (with a 3.0Ah battery). Allowing you to clear more debris, quickly. Its variable speed trigger with lock allows full power control without having to hold down the trigger. The curved tube design creates rotational control and reduces fatigue. Supplied with a concentrator attachment that increases force for stubborn debris. DCM572X1: 1 x 18/54 Volt 9.0/3.0Ah FlexVolt Li-Ion Battery.DCM572N: Bare Unit, No Battery or Charger. Specification Max Air Flow: 195km/h (121mph).Speed: Variable Speed Trigger.Weight: 4.5kg.The DEWALT DCM572X1 FlexVolt XR Blower is supplied with: 1 x 18/54 Volt 9.0/3.0Ah FlexVolt Li-Ion Battery1 x 8 Amp Li-Ion Charger1 x Concentrator Attachment DEWALT FlexVolt XR batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased runtime.
The Steinel HG2120E Car Wrapper Hot Air Gun is fitted with a 7.5m cable which provides a particularly wide action radius. This makes it ideal for wrapping work on large areas. The ceramic heater's temperature can be infinitely varied from 80-630°C at the turn of a thumbwheel. Airflow is controlled in 3 stages. The heat gun has a brushless motor and features an integrated thermal cut-out to prevent overheating. Its ergonomic handle with soft inlay allows comfortable and safe working with one hand. Supplied with a HL Scan Temperature Scanner that measures the temperature of the workpiece surface whilst working on it with a hot air tool. An acoustic signal sounds as soon as heat either exceeds or falls below the ideal temperature. Its display also shows whether workpiece surface is too hot or too cold. Red means too hot, green means ideal temperature and blue means too cold. Specification Input Power: 2,200 Watt.Airflow: 150/150-300/300-500 l/min.Air Temperature: 80-630°C.Weight: 0.67kg.
The Steinel HL1820S Pistol Grip Heat Gun has a powerful motor with approximately 600 hours of motor life. Both temperature and air flow rate is controlled in three stages. It has a balanced, lightweight design and an ergonomically shaped handle with a soft inlay that ensures optimum handling. There is also an integrated thermal cut-out that prevents over heating. The tool can be used with all industry standard nozzles, making all sorts of different applications even easier. For example de-icing, drying, shaping, heat shrinking and much more. Specification Input Power: 1,800W.Airflow: 200/300/500 L/minAir Temperature: 50/400/600°C.Weight: 0.8kg.Steinel HL1820S Pistol-Grip Heat Gun 240 Volt Version.
The Einhell TH-HA 2000/1 Hot Air Gun is suitable for DIY enthusiasts on jobs involving the removal of old lacquer and paint, the fitting of plastic tubes, and much more besides. There are two power settings, so the temperature and air rate can be set for particular job requirements. Four nozzles are included for optimum adjustment of the TH-HA 2000/1 hot air gun to the particular task. There is also a paint scraper for expert removal of lacquer and paint residues from surfaces. Built-in overheat protection and the stable base ensure maximum safety, making the hot air gun also suitable for stationary applications. Supplied with: 1 x Colour Rasper, 1 x Fishtail Nozzle, 1 x Reflector Nozzle, 1 x Deflector Nozzle, 1 x Cone Nozzle and 1 x Carry Case. Specification Input Power: 2,000 Watt. Air Flow: 300/550 l/min. Air Temperature: 350/500°C.Weight: 0.70kg.
