This Teng Tools Industrial wrench is made of chrome vanadium steel for increased strength and durability. It exceeds international standards ISO 6787-1976, ASME B.107.8M-1996, BS6333-1995, DIN 3117-1988 and JIS B4604-1976. Graduated markings on the jaw allow the size of the fastening to be accurately measured and the wrench to be set at the right size. The 15 degree jaw angle allows the wrench to be used in narrow spaces as only 30 degrees turning is needed. The wider jaw opening increases the range of bolt sizes to be worked on. It is non-protruding on the moveable jaw end, which gives better action when space is limited. The handle provides a comfortable hand fit.The TEN4005 Adjustable Wrench has the following specifications: Length: 300mm (12 inch).Capacity: 38mm.Capacity AF: 1.1/2inch.
The popular Diafold Diamond Whetstone is now available with two grit combinations for the ultimate in sharpening versatility. For applications where a dull edge needs to be quickly restored, but a refined edge is required. Simply turn over to use the second grit. The length of the sharpening stone is 110mm.Grit. One Side Red Fine, other side Green extra fine. (600 x 1200 grit)Size 110mm.
The Bosch GIS 1000 C Professional Thermal Camerais ideal for precise reading and documentation of temperatures and relative humidity. While recording measurements, the device’s integrated camera conveniently captures images for instant display with the relevant values. Detailed data is quickly documented and can be shared to remote devices thanks to the Bosch ThermalOn app via Bluetooth connection. The thermo detector delivers a temperature recording, offering professionals five different modes for complex surface and contact temperatures (with integrated K-type functionality), dew point and thermal bridge calculations, and a user mode for custom values. Along with measuring surface and contact temperatures, the GIS 1000 C Professional´s ambient sensor also quickly monitors surrounding conditions for precise measurement of room temperature and relative humidity, enabling an even wider range of applications. A straightforward user interface allows intuitive operation and delivers high-accuracy results on a wide measurement range. Professionals can use the thermo detector in a range of applications, from determining mould risk to checking thermal bridges, as well as for accurate contact measurement of reflective surfaces, liquids, and direct air temperature. The GIS 1000 C Professional is not suitable for medical purposes. Supplied with: 1 x Quick-start Card, 4 x AA 1.5V LR6 Battery, 1 x Micro USB Cable and 1 x Carrying Bag. Specifications: Measurement Range:-40 degreeC to 1000 degreeC.Working Range: 0.1-5m.Measuring Accuracy of IR: ± 1.0 degreeC.Optics (Ratio of meas. distance : meas. spot): 50:1.Resolution: 0.1 degreeC.Measuring Accuracy of Relative Humidity: ± 2%.Laser Diode: Laser class 2, 635nm.Display Type: TFT LCD.Size of Display:2.8in.Frame Buffer (number of images): >200.File Format of Image: .jpg.Data Transfer: MicroUSB, Bluetooth Smart.Shock Protection: 1m.Weight: 0.56kg.
The Arctic Hayes DT1 Radiator Drain Tray Kit is simple and easy-to-use with step by step detailed instructions included. With universal application for 8, 10, 15 and 22mm pipe work. Helps to avoid unnecessary mess and damage to floors to carpets. Perfect for professional use or DIY. Contains the following: Perfect for professional use or DIY. Contains the following: 1 x Draining Tray4 x Water Diverting Collars4 x Reusable Sealing Straps1 x Water-resistant Barrier Gel (sufficient for 6 - 8 applications)
Bahco ProfCut Hardpoint Block Saw is a block saw with extra large hardpoint teeth for sawing lightweight cellular concrete blocks. Has a two-component handle which ensures a comfortable and safe grip. Length: 650mm (26in).Teeth: 2 tpi.
The Bahco SL24 1/4in drive Socket Set contains sockets made from high performance alloy steel with a matt finish. The set is supplied in a High Density Polythene (HDPE) case. Conforms to ISO 1174 and DIN 3120 standards. Contents: 1 x Quick Release, Extra Narrow Head Ratchet 72 teeth 5° action angle.1 x Locking Socket Bit 1/4in x 1/4in.6 x Hex sockets: 4, 5, 6, 7, 8 & 10mm.2 x Slotted Bits: 4 & 5mm.3 x Phillips Bits : PH1, PH2 & PH3.2 x Hex Bits: 4 & 5mm.4 x 1/4in TORX® Bits: TX10, TX15, TX20 & TX25.3 x Pozidriv Bits: PZ1, PZ2 & PZ3.1 x Smooth Operation Universal Joint.1 x 100mm Locking Extension Bar.1 x High Density Plastic Case.
The Stanley FatMax fine cut handsaws have a bi-material handle screwed and ultrasonically welded for comfort and security. The teeth are precision set to generate clearance of kerf for the blade to cut on both the forward and back stroke, increasing cutting efficiency by 30%. These 3 sided teeth are precision ground to offer razor sharp cutting edges at every stage of the stroke. They are induction hardened to stay sharper for longer. Fine cut blade 11 TPI.
This Blue Spot socket set contains 11 useful 1/4 inch square drive sockets which are made from chrome vanadium steel and which have a deep reach for better access. The set contains the following sizes:4, 4.5, 5, 6, 7, 8 ,9, 10, 11, 12 and 13mm. Supplied with a storage rack.
Stanley FatMax® Digital Levels are highly accurate, measuring to the nearest 0.10 degrees at level and plumb. It has 3 vials: horizontal, vertical and the digital vial. A buzzer sounds at 0°, 45° and 90°. The LCD screen features 180° readout, where the display flips in the upside down position to enable easier reading. The level has a recalibration function, allowing a 'false zero', a hold function and a mode function. It is able to measure in degrees (°), percentage (%) and mm/m. It has 2 milled surfaces and a magnetic base. Supplied with a water-resistant bag. Accuracy: Level and plumb: ±0.05.Other angles: ±0.10.The STA042065 Digital Level is 60cm in length.
Bahco Cabinet Rasp with an ERGO™ handle for use in wood, plywood, wallboard, plastics and other soft materials. Edges and surfaces tapered towards the point. Size: 200mm (8in).
The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage and the handle is moulded directly to shaft for a virtually unbreakable bond - gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Contents: Parallel: 3.5 x 75mm, 5.5 x 150mm.Flared: 5.5 x 100mm, 8 x 150mm. Pozi: PZ1 x 100mm, PZ2 x 125mm.
IRWIN Vise-Grip adjustable wrenches have scales in both a metric and imperial on their jaws. The parallel jaws have a smooth surface to provide a secure grip and to help prevent scratches. The quick adjusting jaw opening mechanism allows easy, one-handed, fine adjustment. This durable wrench is made from chrome vanadium steel for a durable wrench.10508161: Length: 150mm, Capacity 25mm.
Record IRWIN Mechanics vices are the most popular and widely used general purpose vice for light to medium-duty applications. The vice has high quality grey iron castings that resist distortion under severe pressure, with a smooth action provided by dovetailed, long barrelled, unbreakable nut and hardened steel replaceable jaw plates.Record Irwin No.1 Mechanics Vice. Jaw Width: 75mm (3in).
The Wiha PicoFinish Fine Screwdrivers come with a round Chrome vanadium steel blade, matt chrome plated. Its ergonomic handle design with a soft zone provides increased comfort. The smooth-running rotating cap allows users to turn the screwdriver quickly and sensitively. Printed screwdriver symbols on the rotating cap make it easier to select the right screwdriver profile.Ideal for delicate and high-precision tasks in precision mechanics as well as for hobbyists and model building. This 7 Piece Set contains the following sizes: 4 x Slotted Fine Screwdrivers: 1.5 x 40mm, 2.0 x 40mm, 2.5 x 50mm & 3.0 x 50mm. 3 x Phillips Fine Screwdrivers: PH00 x 40mm, PH0 x 50mm & PH1 x 60mm.
This Wiha Voltage Detector is used to detect and locate live electrical cabling and wires, breaks and cable interruptions, blown fuses, defective light bulbs on light chains and single wires.The contactless Wiha voltage tester will give an initial indication of whether an area is live or not thanks to an optical and audible signal. Once the tester is switched on, the permanently green LED indicates the tester is ready for use. During the voltage test, the LEDs will light up blue (weak), orange, or red (strong), depending on the strength of the alternating electric field.The device switches off automatically to save energy if it is not used for four minutes. An integrated flashlight allows the user to illuminate the measurement point in dark environments and can be switched off and on manually for use solely as a flashlight. With its push-on clip, the voltage tester snugly fits into any shirt or trouser pocket thanks to its handy size.Suitable for all socket variants worldwide thanks to its measurement tip suited to international usage. Designed for CAT IV 1,000 VAC, the single-pole voltage tester complies with EN 61010-1/IEC 61326. The voltage tester should be tested on a known voltage source before and after every use to ensure it functions correctly. Specifications: Voltage V AC (min. – max.): 12-1000V.Protection Class: IP 67.Operating Temperature: -20 - 40 degreeC.Power: 2 x AAA Batteries (supplied).
Imperial 13in lengths of high carbon bright steel, precision ground to very close tolerances; Above 1 in + - 0.0005in.Below 1 in + - 0.00025in. Closely controlled analysis for uniform machining properties and consistent response to heat treatment. Chamfered, deburred ends for safety.Size 7/16 in
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name. 1. Taper or First tap2. Second or Intermediate tap3. Bottoming, third or plug tap. Metric coarse straight flute taps. Tolerance: Class 2 for 6H FitSurface treatment: BrightMaterial: HSS High Speed SteelChamfer No: 1,2 and 3, Serial no 4 and 5Flute Geometry: Straight Flutes ISO529Size 8.0mm x 1.25 taper
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name. 1. Taper or First tap2. Second or Intermediate tap3. Bottoming, third or plug tap. Metric coarse straight flute taps. Tolerance: Class 2 for 6H FitSurface treatment: BrightMaterial: HSS High Speed SteelChamfer No: 1,2 and 3, Serial no 4 and 5Flute Geometry: Straight Flutes ISO529Size 4.0 x 0.7 second
Dormer E500 straight flute taps are the only type of taps that can be used by hand, but they may also be used in a machine if required. Extremely versatile, can tap through or blind holes in most materials. When tapping blind holes straight flute taps should be used in sets. The three taps which form a set are known by more than one name. 1. Taper or First tap2. Second or Intermediate tap3. Bottoming, third or plug tap. Metric coarse straight flute taps. Tolerance: Class 2 for 6H FitSurface treatment: BrightMaterial: HSS High Speed SteelChamfer No: 1,2 and 3, Serial no 4 and 5Flute Geometry: Straight Flutes ISO529Size 4.0mm x 0.7 taper
The Faithfull Ratchet Combination Spanner Set in Tool Roll, 6 Piece, has a chrome vanadium finish and flexible ratchet heads, which can turn through 180 degree, allowing them to be used in awkward to reach places at any angle. Each spanner has a 72 fine-tooth mechanism. A useful arrow illustration is etched in the spanner to indicate the direction of torque.Supplied and held in a convenient fabric tool roll. Specifications: Sizes: 8, 10, 13, 15, 17, 19mm.
The Wiha eMobility Voltage and Continuity Tester ensures electrical isolation. It is suitable for voltage testing, flow testing and rotational field testing. Also suitable for testing hybrid and electric vehicles as well as photovoltaic systems.The illuminated LED display shows present voltage on an 8-level scale, as well as 'the' actual value. It additionally offers the option of single-pole phase testing, optical rotational field display, as well as automatic polarity recognition.An integrated spacer makes quick one-handed testing possible. Whilst measuring point illumination makes it ideal for work in poorly lit working environments. For additional safety, a low battery charge is indicated directly on the LC display. Complaint with the standards EN 61010-1 and EN 61243-3:2014. Specifications: Min. - Max. Voltage (AC/DC): 12-1,000/12-1,500V.Contamination Level: 2.Protection Class: IP 64.Operating Temperature: -15 degreeC - 40 degreeC.Power: 2 x AAA Batteries (supplied).
The Wiha PicoFinish Pozidriv Fine Screwdrivers come with a round Chrome vanadium steel blade, matt chrome plated. Its ergonomic handle design with a soft zone provides increased comfort. The smooth-running rotating cap allows users to turn the screwdriver quickly and sensitively. Printed screwdriver symbols on the rotating cap make it easier to select the right screwdriver profile.Ideal for delicate and high-precision tasks in precision mechanics as well as for hobbyists and model building.
The Footprint Pipe Wrenches have drop forged hooks and are fitted to a pressed steel frame. The teeth are induction hardened to ensure a high grip is maintained. This traditional plumber's tool is an all purpose wrench which grips the workpiece tighter as more pressure is exerted. Removable screw for easy adjustment. This style has a screwdriver end on the handle.The Footprint 6989w Pipe Wrench has the following specifcation: Length: 230mm (9in).Jaw Capacity: 48mm.
The BlueSpot Tools Soft Grip Mini End Cutter Pliers are manufactured from high-quality carbon steel for increased durability. Fitted with soft grip handles for increased comfort. The double leaf-springs allow the jaws to open automatically. Ideal for cutting and trimming in tight spaces.
Feather light yet ultra strong. Extremely lightweight, stable magnesium, fibreglass reinforced plastics, and cold-drawn BESSEY quality steel: this optimum mixture is characteristic of the innovative high-tech KliKlamp lever clamp. That's why the smallest KliKlamp weighs just a tiny 260 g simply ideal for assembly work or where several clamps are being used at once. The pressure is also built up easily and highly effectively: the VIBRAFIX ratchet mechanism lets you achieve a huge clamping force quickly with just 2 fingers. You certainly will never have clamped as quickly, easily or as gently as this! Weight starts from a tiny 260g.Sturdy fixed and sliding arms made from lightweight magnesium.Stepped, vibration-resistant VIBRAFIX ratchet mechanism. Your benefits at a glance: 1 Sturdy magnesium.The surface-coated fixed and sliding arms, made from sturdy magnesium, are extremely light and strong. 2 VIBRAFIX stepped ratchet mechanism.The multi-stage VIBRAFIX ratchet mechanism is easy to operate, vibration-resistant, particularly easy-to-control, and can be released quickly. 3 A secure hold.The fixed arm with the crossed v-grooves holds round, pointed or angular components firmly in place. This is part of what makes the KliKlamp so versatile. 4 Ergonomically shaped clamping arm.The ergonomically shaped clamping arm made from fibreglass-reinforced polyamide is breakproof and fits very snugly in the hand. Thats quality of the highest calibre.The Bessey KLI16 has the following: Clamping force up to 1,200NOpening 160mmThroat depth 80mmRail 20 x 5mmWeight 0.29Kg
Increasingly high clamping pressures, with larger throat depths and wider openings. These are the demands that original BESSEY high-performance clamps need to fulfil on a daily basis. Used in steel and boiler construction, shipbuilding and automotive engineering. Also in heavy timber construction, laminated wood beam construction and carpentry. In other words, wherever sturdy or heavy parts need to be clamped very securely, with a very high clamping pressure. Developed on the basis of the tried-and-tested BESSEY all-steel screw clamp, the original BESSEY high-performance clamps fulfil all requirements with panache... again and again! The high-performance clamp. Your benefits at a glance: Extremely sturdy.Fixed bracket and pressure plate are produced and tempered from a single piece, thus very torsion-resistant. This guarantees you maximum tensile strength and sturdiness. Special tilting pressure plate.The heat-resistant pressure plate is replaceable and can be tilted up to 35° so it can even clamp on angled or sloping surfaces. Tempered spindle. The tempered spindle is particularly sturdy and wear-resistant. This considerably increases its durability. Sturdy tommy bar.The sturdy tommy bar has special rounded hand-friendly ends, as well as a hexagonal bolt. This allows powerful, controlled clamping.The Bessey SG30M has the following: Clamping force up to 12,000NTightening torque: 40NmOpening 300mmThroat depth 140mmRail 34 x 13mmWeight 3.0Kg
Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. This tubular box spanner is made from bright plated steel and able to accommodate a tommy bar.The Melco TIM12 ISO Metric Box Spanner is made with 4mm steel and has a black powder coated finish. With the following specification: Size: 65 x 70mm.Length: 200mm (8in).
Melco Double ended box spanners are thinner than a socket and are much longer so that they can be used to loosen or tighten bolts and nuts in narrow recesses, meaning that they are often used in plumbing maintenance and automotive repair. The tubular box spanner is manufactured from bright plated steel and is able to accommodate a tommy bar.The Melco TAO A/F Box Spanner is made with 3mm steel and has the following specification: Size: 1/4 x 5/16in.Length: 100mm (4in).
The Bahco 424 Series Bevel Edge Chisels are durable multi-purpose chisels which have been developed to achieve a high standard of performance. Manufactured from hardened and tempered steel with a precision ground blade for maximum sharpness and long-lasting performance. The specially designed 2-component handle, maximises control and comfort in use. The blades are honed ready-to-use.Includes protective holster. Size: 32mm.
Triangular, with edges tapering towards the point.Surfaces and edges single cut.For sharpening all types of saw with fine cross toothing.Second cut.Width figures indicate the largest width of the file section. Size: 5in.Type: extra slim taper saw file.
For the same jobs as the hand file 100, but is sometimes preferred because its tapered shape enables the user to reach into angles and corners more easily. Slightly tapered in width and thickness. Suitable for general work on iron and steel. Double cut on both sides and single cut on both edges.Size 200mm (8in)Cut: flat smooth.Tanged.
The Bahco SB7800SM Series Hex Sockets featuring a dynamic drive profile for higher efficiency and optimum grip. Manufactured from high-performance alloy steel with a highly polished finish. Not suitable for machine operation. 1/2in square drive.
1 x Bahco 2430S ERGO™ Insulated Long Nose Pliers 160mm (6.1/4in) Cutting Capacity; Copper 3mm, Iron 1.8mm, Iron Alloy 1.6mm Bahco ERGO™ Insulated Long Nose Pliers have half-round serrated jaws for gripping flat and round material. The hardened cutting edges are suitable for cutting soft and hard wire. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
The Bahco BAHCOFIT Nut Drivers are made from high-performance alloy steel that is laser marked with the size and code number. Their two-component handles with over 75% elastomer provide extra grip and durability. They are marked with an indelible symbol for easy choice of the correct tip.Tip Size: 8.0mmBlade Length: 150mm.
