The Monument Wide Jaw Adjustable Wrench has a plastic rubber cushion handle, which is permanently adhered to the shank of the tool. Its soft, anti-slip material ensures a comfortable and strong grip. The jaw configuration of the wrench results in a stronger and better 'tool to fastener' contact point, providing a substantially durable tool. Made from Chrome Vanadium Steel with a Phosphate finish.The Monument Wide Jaw Adjustable Wrench has the following specification: Length: 150mm (6in). Jaw Capacity: 34mm.
The Monument Wide Jaw Adjustable Wrench has a plastic rubber cushion handle, which is permanently adhered to the shank of the tool. Its soft, anti-slip material ensures a comfortable and strong grip. The jaw configuration of the wrench results in a stronger and better 'tool to fastener' contact point, providing a substantially durable tool. Made from Chrome Vanadium Steel with a Phosphate finish.The Monument Wide Jaw Adjustable Wrench has the following specification: Length: 200mm (8in). Jaw Capacity: 38mm.
The Monument Wide Jaw Adjustable Wrench has a plastic rubber cushion handle, which is permanently adhered to the shank of the tool. Its soft, anti-slip material ensures a comfortable and strong grip. The jaw configuration of the wrench results in a stronger and better 'tool to fastener' contact point, providing a substantially durable tool. Made from Chrome Vanadium Steel with a Phosphate finish.The Monument Wide Jaw Adjustable Wrench has the following specification: Length: 250mm (10in). Jaw Capacity: 50mm.
The Monument Wide Jaw Adjustable Wrench has a plastic rubber cushion handle, which is permanently adhered to the shank of the tool. Its soft, anti-slip material ensures a comfortable and strong grip. The jaw configuration of the wrench results in a stronger and better 'tool to fastener' contact point, providing a substantially durable tool. Made from Chrome Vanadium Steel with a Phosphate finish.The Monument Wide Jaw Adjustable Wrench has the following specification: Length: 300mm (12in). Jaw Capacity: 60mm.
Monument Basin Wrench for fitting back nuts and union nuts of pillar and bath taps behind basins, sinks and baths. Manufactured from strong malleable material, and correctly machined jaws to fit standard back nuts 1/2 and 3/4in BSP. The offset design allows you to reach behind sinks & baths easily Overall Length: 260mm
The Monument 331E Crutch End Domestic Stopcock Key has been designed for turning on and off hard-to-reach or difficult stopcocks, such as under kitchen units, sinks and stiff to turn outside taps. The design provides increased leverage and is supplied with a removable tommy bar in hexagon shaft. This allows it to connect to a socket and ratchet handle for ease of use in difficult corners.
The Monument Spin Thru Drain Cleaner is a cleaner way to unblock drains. The 6mm (1/4in) spring is hand fed out of the rotatable plastic container into the drain, keeping it away from clean kitchen and bathroom surfaces. Suitable for sinks, baths, showers and small pipes.Specifications: Length: 7.5m (25ft).Diameter: 6.35mm (1/4in)
The Monument Spin Thru Drain Cleaner is a cleaner way to unblock drains. The 6mm (1/4in) spring is hand fed out of the rotatable plastic container into the drain, keeping it away from clean kitchen and bathroom surfaces. Suitable for sinks, baths, showers and small pipes.Specifications: Length: 6m (20ft).Diameter: 6.35mm (1/4in).
The Monument 339C Mains Water Tapered Stopcock Key is used primarily for turning on and off external 1/2 5/8 and 3/4in Crutch stopcocks which can be difficult to reach. The turning handle has one chisel end for lifting covers and has a painted finish.
Monument Adjustable Fitted 2 Jaw Wrench (DIY) is an adjustable basin wrench for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths. The teeth on the jaws will grip uneven shapes as well as pipes, hexagons, squares etc. The swivelling head allows access where fixed spanners will not operate. Round cross section steel handle with removable tommy bar. Size: 15 and 22mm (1/2 and 3/4 in).
The Monument Adjustable Basin Grip + Wrenches are ideal for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths.The teeth on the jaws will grip uneven shapes etc. The swivelling head allows access where fixed spanners will not operate and the solid steel handle has profiled end to allow attachment of socket and extension for longer reach. Correct heat treatment of all components ensures a long life.Supplied with small and medium jaws. Size 15 and 22mm, 1/2 and 3/4 in
Monument 3450G is suitable for soldering and brazing of copper, brass and aluminium. Use with propane/MAPP® gas. The Gas Torch has Piezo ignition and produces a hot turbine flame, with a flame lock button. The flame size can be changed via an adjustable valve. An ergonomic hand grip ensures comfortable use. Fits CGA600 Cylinder.
The Monument Adjustable Basin Grip + Wrenches are ideal for use in tightening or loosening nuts in awkward positions, particularly those underneath basins or baths.The teeth on the jaws will grip uneven shapes etc. The swivelling head allows access where fixed spanners will not operate and the solid steel handle has profiled end to allow attachment of socket and extension for longer reach. Correct heat treatment of all components ensures a long life.Size: 15 to 42mm (1/2 to 1 1/2 in).
The Monument 361T Box Ring Immersion Heater Spanner is made with an octagon at the base of the cylindrical section to enable really tight immersion heaters to be loosened by striking the handle. The one-piece casting enables full transmission of power to the spanner unlike loose tommy bar types. Overall clearance around the spanner is 7/8in (22mm) allowing easier fitting on insulated copper cylinders. Made in Britain.
The Monument 358J Deep Box Immersion Spanner has an octagonal box ring at the base of a steel cylinder. The deep box design allows easy access to heaters that are surrounded by insulation or recessed. Supplied with a separate tommy bar.
The Monument Thin Jaw Adjustable Wrench with a slim head for easy access to fittings, tap cartridges, nuts etc. in confined spaces. Ideal for the fitting and removal of radiator bleed valves, as well as tap cartridges where the complete removal of the shroud is not possible.The Monument Thin Jaw Adjustable Wrench has the following specification: Size: 150mmCapacity: 34mm
The Monument Thin Jaw Adjustable Wrench with a slim head for easy access to fittings, tap cartridges, nuts etc. in confined spaces. Ideal for the fitting and removal of radiator bleed valves, as well as tap cartridges where the complete removal of the shroud is not possible.The Monument Thin Jaw Adjustable Wrench has the following specification: Size: 200mmCapacity: 38mm
Monument Adaptor Primus 2000 To 430F Adaptor adapts the Monument 430F Professional Torch to refillable bottles e.g. Primus®2000 and Calor®340. Made in Britain.
Monument D.I.Y. Tap Reseating Tool re-cuts the seat of leaking taps. Fits BS5412 & BS1010 1/2in and 3/4in taps. Complete with: 17, 19 and 25mm (11/16in 3/4in 1in) Flat Cutters and two double ended plastic bushes. Made in Britain.
The Monument 4501F Grip+ R2 3-Stepped Radiator Valve Tool fits most radiator end caps and valves. The 3-stepped tool has the following sizes: 10mm & 12mm Slotted and 1/2in A/F Hex. Use with MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access.
The Monument Grip+ Radiator 0-Shape Balancing Tool fits most radiator valves. Use with the MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain.1 x Monument 4505R Grip+ Radiator 4mm 0-Shape Balancing Tool
The Monument 4507X Grip+ R1 Radiator Thermostatic Radiator Valve Tail Fitting Tool with 16mm internal hex. Fits most radiator valves. Use with MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain.
The Monument 4508A Grip+ T7 3-Prong Gate Valve Tool is for closing and opening damaged gate valves. Use with the MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain.
The Monument 4527C Grip+ T6 Three Pin Sink Rose Tool is for holding a sink strainer rose in position whilst tightening and loosening nut. Used with the MON4537 Shorty Swivel Head Handle or MON345 Pro Adjustable Basin Wrench allowing improved access. Made in Britain.
Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Parallel bushes for use where the internal thread will not allow the entry of tapered cones. For taps with recessed threads in body, use parallel bush series.Cutters are case hardened, feedscrew allows fine adjustment to the cutter.All parts are interchangeable. Fits 1/2in and 3/4in BS5412 bevelled seats. Complete with 17, 20 mm (11/16 in, 13/16 in) Bevelled Cutters. One double bush.
Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Parallel bushes for use where the internal thread will not allow the entry of tapered cones. For taps with recessed threads in the body, use the parallel brush series.Cutters are case hardened and the feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits 1/2in and 3/4in BS1010 new series and BS5412 Flat and Bevelled seats. Complete with 17, 19, 20, 25 mm (11/16in 3/4in 13/16in 1in) flat cutters and 11/16in, 13/16in (17,20mm) Bevelled Cutters. Two double bushes.
The Monument 4562P GRIP+ is a pair of stepped 8, 9 and 10mm & 11, 12 and 13mm Nickel Plated Hexagonal Fittings. They can be connected to the Monument 3240U and the 4537G Grip plus shorty swivel handle, extending the reach of the Monument 3240U box spanners, for easier access to Monobloc tap back nuts.
Monument Tap Reseating Tool 1/2 inch re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series. Cutters are case hardened. The feedscrew allows fine adjustment to the cutter. All parts are interchangeable. Fits old series 1/2 in BS1010 flat seats. Complete with 17 and 19mm (11/16 in and 3/4 in ) flat cutters and a tapered cone.
Monument Tap Reseating Tool 1/2in & 3/4in re-cuts the seats of worn taps or stopcocks without disconnection from the pipework. Tapered cones screw into the top of the tap body, provided the tap body is threaded to the top. For taps with recessed threads in the body, use the parallel bush series.Cutters are case hardened. The feedscrew allows fine adjustment to the cutter.All parts are interchangeable. Fits old series 1/2in and 3/4in BS1010 flat seats. Complete with 17, 19, 20 and 25mm (11/16in, 3/4in, 13/16in, 1in) flat cutters and 2 tapered cones.
